80072ee2 when sync via USB - ok with wireless

I have no problems with Sync over wireless, but through USB I get

80072ee2. The server could not be reached.

WM 5.0, AS 4.1, Qtek 9100

Thanks

Steven

Try clearing your proxy setting under your connection settings > connections
> manage existing connections > proxy settings tab, make sure that This
network connects to the Internet is selected and that the This network uses
a proxy server to connect to the internet box is unchecked.

Andres

"Steven Ward" <> wrote in message
news:%...
>I have no problems with Sync over wireless, but through USB I get
>
> 80072ee2. The server could not be reached.
>
> WM 5.0, AS 4.1, Qtek 9100
>
> Thanks
>
> Steven
>

Thanks for this.

Unfortunately it made no difference - i still get the same error.

"Andres Perales" <> wrote in message
news:%...
> Try clearing your proxy setting under your connection settings >
> connections
> > manage existing connections > proxy settings tab, make sure that This
> network connects to the Internet is selected and that the This network
> uses a proxy server to connect to the internet box is unchecked.
>
> Andres
>
> "Steven Ward" <> wrote in message
> news:%...
>>I have no problems with Sync over wireless, but through USB I get
>>
>> 80072ee2. The server could not be reached.
>>
>> WM 5.0, AS 4.1, Qtek 9100
>>
>> Thanks
>>
>> Steven
>>
>
>

Hi,
Is the host name the same internally and externally in the DNS?


--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.tabletpctalk.com
http://www.pocketpctalk.com
http://www.mobilitytalk.com

ActiveSync 4.x Troubleshooting Guide -
http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm

"Steven Ward" <> wrote in message
news:%...
>I have no problems with Sync over wireless, but through USB I get
>
> 80072ee2. The server could not be reached.
>
> WM 5.0, AS 4.1, Qtek 9100
>
> Thanks
>
> Steven
>

I just had the exact same problem with my new 8125. Tried your suggestion and
it worked!

"Steven Ward" wrote:

> Thanks for this.
>
> Unfortunately it made no difference - i still get the same error.
>
> "Andres Perales" <> wrote in message
> news:%...
> > Try clearing your proxy setting under your connection settings >
> > connections
> > > manage existing connections > proxy settings tab, make sure that This
> > network connects to the Internet is selected and that the This network
> > uses a proxy server to connect to the internet box is unchecked.
> >
> > Andres
> >
> > "Steven Ward" <> wrote in message
> > news:%...
> >>I have no problems with Sync over wireless, but through USB I get
> >>
> >> 80072ee2. The server could not be reached.
> >>
> >> WM 5.0, AS 4.1, Qtek 9100
> >>
> >> Thanks
> >>
> >> Steven
> >>
> >
> >
>
>
>

Sorry, I don't mean to throw a spanner in the works but I get this error when
I configured the same internal/external DNS name to resolve the external ip
address, because WM 5 seems to time out if I try a GPRS sync after a USB sync
until you terminate Active Sync from memory.
Someone said that Active Sync is caching the ip ... but it apears there is
more to it ... so I am back to the drawing board.

--
Kind Regards
Michael Molnar


"Chris De Herrera" wrote:

> Hi,
> Is the host name the same internally and externally in the DNS?
>
>
> --
> Chris De Herrera
> http://www.pocketpcfaq.com
> http://www.tabletpctalk.com
> http://www.pocketpctalk.com
> http://www.mobilitytalk.com
>
> ActiveSync 4.x Troubleshooting Guide -
> http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
>
> "Steven Ward" <> wrote in message
> news:%...
> >I have no problems with Sync over wireless, but through USB I get
> >
> > 80072ee2. The server could not be reached.
> >
> > WM 5.0, AS 4.1, Qtek 9100
> >
> > Thanks
> >
> > Steven
> >
>
>
>

Michael,
I am seeing the same behavior. Sync from USB fine, pull from cradle and
sync fails. Close Active Sync in running applications, retry sync and it
works. I have no Proxy configured for my wireless network, and the
internal/external DNS name are the same for the OWA server. I would love to
know what is going on with this.

"Michael Molnar" wrote:

> Sorry, I don't mean to throw a spanner in the works but I get this error when
> I configured the same internal/external DNS name to resolve the external ip
> address, because WM 5 seems to time out if I try a GPRS sync after a USB sync
> until you terminate Active Sync from memory.
> Someone said that Active Sync is caching the ip ... but it apears there is
> more to it ... so I am back to the drawing board.
>
> --
> Kind Regards
> Michael Molnar
>
>
> "Chris De Herrera" wrote:
>
> > Hi,
> > Is the host name the same internally and externally in the DNS?
> >
> >
> > --
> > Chris De Herrera
> > http://www.pocketpcfaq.com
> > http://www.tabletpctalk.com
> > http://www.pocketpctalk.com
> > http://www.mobilitytalk.com
> >
> > ActiveSync 4.x Troubleshooting Guide -
> > http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
> >
> > "Steven Ward" <> wrote in message
> > news:%...
> > >I have no problems with Sync over wireless, but through USB I get
> > >
> > > 80072ee2. The server could not be reached.
> > >
> > > WM 5.0, AS 4.1, Qtek 9100
> > >
> > > Thanks
> > >
> > > Steven
> > >
> >
> >
> >

Thanks for this. When you stated that AS was caching the IP, my 8125's (10 of
them) are acting the same way. When I terminate AS from PDA memeory and
connect to PC sync's just fine. If I just plug it in, after sync'ing via
wireless, I get the 80072ee2 error. As long as I close AS in running apps
between sync'ing wirelessly or via USB it works, otherwise I get 80072ee2 or
on the PDA I get Waiting for Network. I think it is not releasing the IP
correctly? Do you know of any fix? Thanks.

Michael.


"RMac" wrote:

> Michael,
> I am seeing the same behavior. Sync from USB fine, pull from cradle and
> sync fails. Close Active Sync in running applications, retry sync and it
> works. I have no Proxy configured for my wireless network, and the
> internal/external DNS name are the same for the OWA server. I would love to
> know what is going on with this.
>
> "Michael Molnar" wrote:
>
> > Sorry, I don't mean to throw a spanner in the works but I get this error when
> > I configured the same internal/external DNS name to resolve the external ip
> > address, because WM 5 seems to time out if I try a GPRS sync after a USB sync
> > until you terminate Active Sync from memory.
> > Someone said that Active Sync is caching the ip ... but it apears there is
> > more to it ... so I am back to the drawing board.
> >
> > --
> > Kind Regards
> > Michael Molnar
> >
> >
> > "Chris De Herrera" wrote:
> >
> > > Hi,
> > > Is the host name the same internally and externally in the DNS?
> > >
> > >
> > > --
> > > Chris De Herrera
> > > http://www.pocketpcfaq.com
> > > http://www.tabletpctalk.com
> > > http://www.pocketpctalk.com
> > > http://www.mobilitytalk.com
> > >
> > > ActiveSync 4.x Troubleshooting Guide -
> > > http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
> > >
> > > "Steven Ward" <> wrote in message
> > > news:%...
> > > >I have no problems with Sync over wireless, but through USB I get
> > > >
> > > > 80072ee2. The server could not be reached.
> > > >
> > > > WM 5.0, AS 4.1, Qtek 9100
> > > >
> > > > Thanks
> > > >
> > > > Steven
> > > >
> > >
> > >
> > >

I have not found a solution for this yet. I have posted on pdaphonehome.com
and did not receive any answers there either. Google searches turn up very
little for 80072EE2 as well.

Since so few have reported this problem I wonder if there is something
peculiar with the networks our devices are connected to. I'm still looking
around for something. I'll post it hear if turn up anything.


"michael" wrote:

> Thanks for this. When you stated that AS was caching the IP, my 8125's (10 of
> them) are acting the same way. When I terminate AS from PDA memeory and
> connect to PC sync's just fine. If I just plug it in, after sync'ing via
> wireless, I get the 80072ee2 error. As long as I close AS in running apps
> between sync'ing wirelessly or via USB it works, otherwise I get 80072ee2 or
> on the PDA I get Waiting for Network. I think it is not releasing the IP
> correctly? Do you know of any fix? Thanks.
>
> Michael.
>
>
> "RMac" wrote:
>
> > Michael,
> > I am seeing the same behavior. Sync from USB fine, pull from cradle and
> > sync fails. Close Active Sync in running applications, retry sync and it
> > works. I have no Proxy configured for my wireless network, and the
> > internal/external DNS name are the same for the OWA server. I would love to
> > know what is going on with this.
> >
> > "Michael Molnar" wrote:
> >
> > > Sorry, I don't mean to throw a spanner in the works but I get this error when
> > > I configured the same internal/external DNS name to resolve the external ip
> > > address, because WM 5 seems to time out if I try a GPRS sync after a USB sync
> > > until you terminate Active Sync from memory.
> > > Someone said that Active Sync is caching the ip ... but it apears there is
> > > more to it ... so I am back to the drawing board.
> > >
> > > --
> > > Kind Regards
> > > Michael Molnar
> > >
> > >
> > > "Chris De Herrera" wrote:
> > >
> > > > Hi,
> > > > Is the host name the same internally and externally in the DNS?
> > > >
> > > >
> > > > --
> > > > Chris De Herrera
> > > > http://www.pocketpcfaq.com
> > > > http://www.tabletpctalk.com
> > > > http://www.pocketpctalk.com
> > > > http://www.mobilitytalk.com
> > > >
> > > > ActiveSync 4.x Troubleshooting Guide -
> > > > http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
> > > >
> > > > "Steven Ward" <> wrote in message
> > > > news:%...
> > > > >I have no problems with Sync over wireless, but through USB I get
> > > > >
> > > > > 80072ee2. The server could not be reached.
> > > > >
> > > > > WM 5.0, AS 4.1, Qtek 9100
> > > > >
> > > > > Thanks
> > > > >
> > > > > Steven
> > > > >
> > > >
> > > >
> > > >

I thought the same thing about the network, but I am not doing anything
really odd. I am using an internal DNS server. I can reproduce the problem
pretty readily by manually terminating the AS program. It responds the same
on all PDA's I have.

Thanks. I will look forward to any news.

Michael.


"RMac" wrote:

> I have not found a solution for this yet. I have posted on pdaphonehome.com
> and did not receive any answers there either. Google searches turn up very
> little for 80072EE2 as well.
>
> Since so few have reported this problem I wonder if there is something
> peculiar with the networks our devices are connected to. I'm still looking
> around for something. I'll post it hear if turn up anything.
>
>
> "michael" wrote:
>
> > Thanks for this. When you stated that AS was caching the IP, my 8125's (10 of
> > them) are acting the same way. When I terminate AS from PDA memeory and
> > connect to PC sync's just fine. If I just plug it in, after sync'ing via
> > wireless, I get the 80072ee2 error. As long as I close AS in running apps
> > between sync'ing wirelessly or via USB it works, otherwise I get 80072ee2 or
> > on the PDA I get Waiting for Network. I think it is not releasing the IP
> > correctly? Do you know of any fix? Thanks.
> >
> > Michael.
> >
> >
> > "RMac" wrote:
> >
> > > Michael,
> > > I am seeing the same behavior. Sync from USB fine, pull from cradle and
> > > sync fails. Close Active Sync in running applications, retry sync and it
> > > works. I have no Proxy configured for my wireless network, and the
> > > internal/external DNS name are the same for the OWA server. I would love to
> > > know what is going on with this.
> > >
> > > "Michael Molnar" wrote:
> > >
> > > > Sorry, I don't mean to throw a spanner in the works but I get this error when
> > > > I configured the same internal/external DNS name to resolve the external ip
> > > > address, because WM 5 seems to time out if I try a GPRS sync after a USB sync
> > > > until you terminate Active Sync from memory.
> > > > Someone said that Active Sync is caching the ip ... but it apears there is
> > > > more to it ... so I am back to the drawing board.
> > > >
> > > > --
> > > > Kind Regards
> > > > Michael Molnar
> > > >
> > > >
> > > > "Chris De Herrera" wrote:
> > > >
> > > > > Hi,
> > > > > Is the host name the same internally and externally in the DNS?
> > > > >
> > > > >
> > > > > --
> > > > > Chris De Herrera
> > > > > http://www.pocketpcfaq.com
> > > > > http://www.tabletpctalk.com
> > > > > http://www.pocketpctalk.com
> > > > > http://www.mobilitytalk.com
> > > > >
> > > > > ActiveSync 4.x Troubleshooting Guide -
> > > > > http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
> > > > >
> > > > > "Steven Ward" <> wrote in message
> > > > > news:%...
> > > > > >I have no problems with Sync over wireless, but through USB I get
> > > > > >
> > > > > > 80072ee2. The server could not be reached.
> > > > > >
> > > > > > WM 5.0, AS 4.1, Qtek 9100
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > Steven
> > > > > >
> > > > >
> > > > >
> > > > >