Windows Vista Tips

Windows Vista Tips > Newsgroups > Windows Update > "Access is denied." While Installing XP Pro SP3

Reply
Thread Tools Display Modes

"Access is denied." While Installing XP Pro SP3

 
 
DaleD
Guest
Posts: n/a

 
      05-10-2008
Late last night, Automatic Updates informed me that it was ready to download
Windows XP Service Pack 3. I clicked the button to proceed with the
download, and then went to bed. The next morning, I saw no indication that
it was downloaded or ready to install, so I rebooted as an administrator and
tried to install it through Windows Update. The process was very slow, and
after more than an hour, a message box appeared on the screen that said,
"Access is denied." It was followed by another message box that said,
"Service Pack 3 installation did not complete. Select 'OK' to undo the
changes that have been made." I clicked OK on both message boxes and then
had to wait 30 minutes for it to rollback the changes it had made during the
preceding hour. Finally, there was a message box that said, "Service Pack 3
installation did not complete. Windows XP has been partially updated and may
not work properly."

I rebooted and downloaded WindowsXP-KB936929-SP3-x86-ENU.exe from
http://support.microsoft.com/kb/322389/, so that I could install it without
Windows Update. Then, I rebooted as an administrator, without a network
connection, and shut down the anti-virus software. I ran the executable, and
again, there was a lengthy installation, followed by the same message boxes,
and then a lengthy rollback.

I rebooted again and consulted the Event Log. I found the following useless
messages:

Source: NtServicePack Event ID: 4373
Windows XP Service Pack 3 installation failed. Access is denied.

Source: NtServicePack Event ID: 4382
Windows XP Service Pack 3 was removed from your computer, and the previous
Windows XP configuration was restored.

Source: NtServicePack Event ID: 4374
Windows XP Service Pack 3 installation failed, leaving Windows XP partially
updated. Service Pack 3 installation did not complete.

Source: USER32 Event ID: 1074
The process winlogon.exe has initiated the restart of [computer] for the
following reason: No title for this reason could be found
Minor Reason: 0x10
Shutdown Type: reboot
Comment: Windows XP Service Pack 3

I don't know why I bother consulting the Event Log. In a dozen years of
writing software, I've never found it useful for troubleshooting any problem.
When are the clowns at Microsoft going to learn the importance of producing
meaningful messages so that users can fix their own problems without calling
a help desk? How hard could it be to produce a message that describes what
the installer was denied access to?

Finally, I rebooted in Safe Mode and ran the installation program again.
This time, it appeared to run successfully. I rebooted into Safe Mode again
to give it an opportunity to clean up anything remaining from the
installation. Then, I rebooted the normal way, as an administrator, and
there was a long pause as it created settings for Outlook Express (a program
I've never used.) After that, two Command Prompt windows appeared briefly on
the screen, and one of them contained numerous copies of the "Access is
denied" message. God only knows if I should be concerned about this, or if
there's anything I can do to fix it. All I know is I've wasted the whole day
trying to install Service Pack 3 when I need my computer to work on an
overdue project. Is there any chance I'll get enough benefit from Service
Pack 3 to justify the day I lost trying to install it?

Here's an excerpt from C:\WINDOWS\svcpack.log, which might be helpful to the
troubleshooters at Microsoft. It's completely useless to me.

2060.188: Copied file:
C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\unidrvu i.dll
2060.328: Copied file: C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\unidrv. dll
2060.422: Copied file:
C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\pscript 5.dll
2060.813: Copied file: C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\pscript .ntf
2061.172: Copied file: C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\ps5ui.d ll
2062.203: DoInstallation: Installing assemblies with source root path:
c:\a16b61bc72cc075d1aae\i386\
2075.797: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
2076.110: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
2076.625: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
2077.672: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
2078.031: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
2078.219: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
2078.219: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
2078.328: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
2078.563: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
2078.953: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
2078.953: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
2079.000: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
2079.078: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
2079.078: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
2079.094: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
2079.172: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
2079.266: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
2079.344: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
2079.453: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
2079.453: Num Ticks for Copying files : 741687
2081.781: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
ProductInstall.GlobalRegistryChanges.Install error: 0x5
2081.781: INF_REGISTRY Failed
2081.781: DoInstallationoRegistryUpdates failed
2086.750: Unregistration of sprecovr successful
2087.469: Access is denied.
2590.156: Message displayed to the user: Access is denied.
2590.156: User Input: OK
2590.531: Service Pack 3 installation did not complete.

Select 'OK' to undo the changes that have been made.
2592.922: Message displayed to the user: Service Pack 3 installation did not
complete.

Select 'OK' to undo the changes that have been made.
2592.922: User Input: OK
2592.922: Starting process:
C:\WINDOWS\$NtServicePackUninstall$\spuninst\spuni nst.exe /~ -u -z
3189.625: Software Update Rollback has completed with return code 0xbc2.
This rollback requires a reboot.
3189.625: Service Pack 3 installation did not complete.

Windows XP has been partially updated and may not work properly.
3195.594: Message displayed to the user: Service Pack 3 installation did not
complete.

Windows XP has been partially updated and may not work properly.
3195.594: User Input: OK
3195.594: Update.exe extended error code = 0x5
3195.594: Update.exe return code was masked to 0x643 for MSI custom action
compliance.
Shutdown Initiated in Self Extractor
***

 
Reply With Quote
 
 
 
 
Bob_Polo
Guest
Posts: n/a

 
      05-10-2008
I had the same issue. I ended up running a script from the knowledge data
base which reset the registry. "Reset.cmd" SP3 installed ok but now I have no
modems. Both my dialups and WiFi are dead. The dialup comes up as not
connected and the WiFi keeps asking for software to be installed. To make
matters worst Device Manager does not work any more. Comes up blank no
hardware installed. I tried winding back to a previous restore point but
after the system reboots it says " can't restore to this point pick another
restore point". I'm at a wits end. I have enough computer knowledge to get me
into trouble but now I'm out of depth. Someone please help! I'm running a
dell with inbuild modem the WiFi is a third party job.

"DaleD" wrote:

> Late last night, Automatic Updates informed me that it was ready to download
> Windows XP Service Pack 3. I clicked the button to proceed with the
> download, and then went to bed. The next morning, I saw no indication that
> it was downloaded or ready to install, so I rebooted as an administrator and
> tried to install it through Windows Update. The process was very slow, and
> after more than an hour, a message box appeared on the screen that said,
> "Access is denied." It was followed by another message box that said,
> "Service Pack 3 installation did not complete. Select 'OK' to undo the
> changes that have been made." I clicked OK on both message boxes and then
> had to wait 30 minutes for it to rollback the changes it had made during the
> preceding hour. Finally, there was a message box that said, "Service Pack 3
> installation did not complete. Windows XP has been partially updated and may
> not work properly."
>
> I rebooted and downloaded WindowsXP-KB936929-SP3-x86-ENU.exe from
> http://support.microsoft.com/kb/322389/, so that I could install it without
> Windows Update. Then, I rebooted as an administrator, without a network
> connection, and shut down the anti-virus software. I ran the executable, and
> again, there was a lengthy installation, followed by the same message boxes,
> and then a lengthy rollback.
>
> I rebooted again and consulted the Event Log. I found the following useless
> messages:
>
> Source: NtServicePack Event ID: 4373
> Windows XP Service Pack 3 installation failed. Access is denied.
>
> Source: NtServicePack Event ID: 4382
> Windows XP Service Pack 3 was removed from your computer, and the previous
> Windows XP configuration was restored.
>
> Source: NtServicePack Event ID: 4374
> Windows XP Service Pack 3 installation failed, leaving Windows XP partially
> updated. Service Pack 3 installation did not complete.
>
> Source: USER32 Event ID: 1074
> The process winlogon.exe has initiated the restart of [computer] for the
> following reason: No title for this reason could be found
> Minor Reason: 0x10
> Shutdown Type: reboot
> Comment: Windows XP Service Pack 3
>
> I don't know why I bother consulting the Event Log. In a dozen years of
> writing software, I've never found it useful for troubleshooting any problem.
> When are the clowns at Microsoft going to learn the importance of producing
> meaningful messages so that users can fix their own problems without calling
> a help desk? How hard could it be to produce a message that describes what
> the installer was denied access to?
>
> Finally, I rebooted in Safe Mode and ran the installation program again.
> This time, it appeared to run successfully. I rebooted into Safe Mode again
> to give it an opportunity to clean up anything remaining from the
> installation. Then, I rebooted the normal way, as an administrator, and
> there was a long pause as it created settings for Outlook Express (a program
> I've never used.) After that, two Command Prompt windows appeared briefly on
> the screen, and one of them contained numerous copies of the "Access is
> denied" message. God only knows if I should be concerned about this, or if
> there's anything I can do to fix it. All I know is I've wasted the whole day
> trying to install Service Pack 3 when I need my computer to work on an
> overdue project. Is there any chance I'll get enough benefit from Service
> Pack 3 to justify the day I lost trying to install it?
>
> Here's an excerpt from C:\WINDOWS\svcpack.log, which might be helpful to the
> troubleshooters at Microsoft. It's completely useless to me.
>
> 2060.188: Copied file:
> C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\unidrvu i.dll
> 2060.328: Copied file: C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\unidrv. dll
> 2060.422: Copied file:
> C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\pscript 5.dll
> 2060.813: Copied file: C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\pscript .ntf
> 2061.172: Copied file: C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\ps5ui.d ll
> 2062.203: DoInstallation: Installing assemblies with source root path:
> c:\a16b61bc72cc075d1aae\i386\
> 2075.797: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2076.110: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2076.625: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2077.672: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2078.031: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2078.219: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2078.219: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2078.328: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2078.563: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2078.953: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2078.953: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.000: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.078: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.078: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2079.094: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2079.172: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.266: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.344: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.453: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2079.453: Num Ticks for Copying files : 741687
> 2081.781: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
> ProductInstall.GlobalRegistryChanges.Install error: 0x5
> 2081.781: INF_REGISTRY Failed
> 2081.781: DoInstallationoRegistryUpdates failed
> 2086.750: Unregistration of sprecovr successful
> 2087.469: Access is denied.
> 2590.156: Message displayed to the user: Access is denied.
> 2590.156: User Input: OK
> 2590.531: Service Pack 3 installation did not complete.
>
> Select 'OK' to undo the changes that have been made.
> 2592.922: Message displayed to the user: Service Pack 3 installation did not
> complete.
>
> Select 'OK' to undo the changes that have been made.
> 2592.922: User Input: OK
> 2592.922: Starting process:
> C:\WINDOWS\$NtServicePackUninstall$\spuninst\spuni nst.exe /~ -u -z
> 3189.625: Software Update Rollback has completed with return code 0xbc2.
> This rollback requires a reboot.
> 3189.625: Service Pack 3 installation did not complete.
>
> Windows XP has been partially updated and may not work properly.
> 3195.594: Message displayed to the user: Service Pack 3 installation did not
> complete.
>
> Windows XP has been partially updated and may not work properly.
> 3195.594: User Input: OK
> 3195.594: Update.exe extended error code = 0x5
> 3195.594: Update.exe return code was masked to 0x643 for MSI custom action
> compliance.
> Shutdown Initiated in Self Extractor
> ***
>

 
Reply With Quote
 
 
 
 
irunpc
Guest
Posts: n/a

 
      05-10-2008
Same exact problem here. Ok MS, what's the solution?????

"DaleD" wrote:

> Late last night, Automatic Updates informed me that it was ready to download
> Windows XP Service Pack 3. I clicked the button to proceed with the
> download, and then went to bed. The next morning, I saw no indication that
> it was downloaded or ready to install, so I rebooted as an administrator and
> tried to install it through Windows Update. The process was very slow, and
> after more than an hour, a message box appeared on the screen that said,
> "Access is denied." It was followed by another message box that said,
> "Service Pack 3 installation did not complete. Select 'OK' to undo the
> changes that have been made." I clicked OK on both message boxes and then
> had to wait 30 minutes for it to rollback the changes it had made during the
> preceding hour. Finally, there was a message box that said, "Service Pack 3
> installation did not complete. Windows XP has been partially updated and may
> not work properly."
>
> I rebooted and downloaded WindowsXP-KB936929-SP3-x86-ENU.exe from
> http://support.microsoft.com/kb/322389/, so that I could install it without
> Windows Update. Then, I rebooted as an administrator, without a network
> connection, and shut down the anti-virus software. I ran the executable, and
> again, there was a lengthy installation, followed by the same message boxes,
> and then a lengthy rollback.
>
> I rebooted again and consulted the Event Log. I found the following useless
> messages:
>
> Source: NtServicePack Event ID: 4373
> Windows XP Service Pack 3 installation failed. Access is denied.
>
> Source: NtServicePack Event ID: 4382
> Windows XP Service Pack 3 was removed from your computer, and the previous
> Windows XP configuration was restored.
>
> Source: NtServicePack Event ID: 4374
> Windows XP Service Pack 3 installation failed, leaving Windows XP partially
> updated. Service Pack 3 installation did not complete.
>
> Source: USER32 Event ID: 1074
> The process winlogon.exe has initiated the restart of [computer] for the
> following reason: No title for this reason could be found
> Minor Reason: 0x10
> Shutdown Type: reboot
> Comment: Windows XP Service Pack 3
>
> I don't know why I bother consulting the Event Log. In a dozen years of
> writing software, I've never found it useful for troubleshooting any problem.
> When are the clowns at Microsoft going to learn the importance of producing
> meaningful messages so that users can fix their own problems without calling
> a help desk? How hard could it be to produce a message that describes what
> the installer was denied access to?
>
> Finally, I rebooted in Safe Mode and ran the installation program again.
> This time, it appeared to run successfully. I rebooted into Safe Mode again
> to give it an opportunity to clean up anything remaining from the
> installation. Then, I rebooted the normal way, as an administrator, and
> there was a long pause as it created settings for Outlook Express (a program
> I've never used.) After that, two Command Prompt windows appeared briefly on
> the screen, and one of them contained numerous copies of the "Access is
> denied" message. God only knows if I should be concerned about this, or if
> there's anything I can do to fix it. All I know is I've wasted the whole day
> trying to install Service Pack 3 when I need my computer to work on an
> overdue project. Is there any chance I'll get enough benefit from Service
> Pack 3 to justify the day I lost trying to install it?
>
> Here's an excerpt from C:\WINDOWS\svcpack.log, which might be helpful to the
> troubleshooters at Microsoft. It's completely useless to me.
>
> 2060.188: Copied file:
> C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\unidrvu i.dll
> 2060.328: Copied file: C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\unidrv. dll
> 2060.422: Copied file:
> C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\pscript 5.dll
> 2060.813: Copied file: C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\pscript .ntf
> 2061.172: Copied file: C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\ps5ui.d ll
> 2062.203: DoInstallation: Installing assemblies with source root path:
> c:\a16b61bc72cc075d1aae\i386\
> 2075.797: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2076.110: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2076.625: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2077.672: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2078.031: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2078.219: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2078.219: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2078.328: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2078.563: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2078.953: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2078.953: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.000: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.078: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.078: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2079.094: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2079.172: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.266: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.344: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x0
> 2079.453: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2
> 2079.453: Num Ticks for Copying files : 741687
> 2081.781: DoRegistryUpdates:UpdSpInstallFromInfSection Failed for
> ProductInstall.GlobalRegistryChanges.Install error: 0x5
> 2081.781: INF_REGISTRY Failed
> 2081.781: DoInstallationoRegistryUpdates failed
> 2086.750: Unregistration of sprecovr successful
> 2087.469: Access is denied.
> 2590.156: Message displayed to the user: Access is denied.
> 2590.156: User Input: OK
> 2590.531: Service Pack 3 installation did not complete.
>
> Select 'OK' to undo the changes that have been made.
> 2592.922: Message displayed to the user: Service Pack 3 installation did not
> complete.
>
> Select 'OK' to undo the changes that have been made.
> 2592.922: User Input: OK
> 2592.922: Starting process:
> C:\WINDOWS\$NtServicePackUninstall$\spuninst\spuni nst.exe /~ -u -z
> 3189.625: Software Update Rollback has completed with return code 0xbc2.
> This rollback requires a reboot.
> 3189.625: Service Pack 3 installation did not complete.
>
> Windows XP has been partially updated and may not work properly.
> 3195.594: Message displayed to the user: Service Pack 3 installation did not
> complete.
>
> Windows XP has been partially updated and may not work properly.
> 3195.594: User Input: OK
> 3195.594: Update.exe extended error code = 0x5
> 3195.594: Update.exe return code was masked to 0x643 for MSI custom action
> compliance.
> Shutdown Initiated in Self Extractor
> ***
>

 
Reply With Quote
 
PA Bear [MS MVP]
Guest
Posts: n/a

 
      05-10-2008
Error message when you try to install WinXP SP3: "Access is denied" or
“Service Pack installation did not complete”
http://support.microsoft.com/kb/949377
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/

DaleD wrote:
> Late last night, Automatic Updates informed me that it was ready to
> download
> Windows XP Service Pack 3. I clicked the button to proceed with the
> download, and then went to bed. The next morning, I saw no indication
> that
> it was downloaded or ready to install, so I rebooted as an administrator
> and
> tried to install it through Windows Update. The process was very slow,
> and
> after more than an hour, a message box appeared on the screen that said,
> "Access is denied." It was followed by another message box that said,
> "Service Pack 3 installation did not complete.

<snip>

 
Reply With Quote
 
MowGreen [MVP]
Guest
Posts: n/a

 
      05-11-2008
I top, inline, and [scroll to the bottom]

Alf P. Steinbach wrote:

> * PA Bear [MS MVP]:
>
>> Error message when you try to install WinXP SP3: "Access is denied" or
>> Service Pack installation did not complete
>> http://support.microsoft.com/kb/949377

>
>
> Heya.
>
> Neat trick placing all the quoting as extended signature, so that
> Thunderbird removed it all automatically! Finally an argument in favor
> of top-posting! :-)
>
> Anyways, in above KB article, method 3, the last line,
>
> secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb
> /verbose
>
> seems to be Vista-specific, in a procedure for Widows XP.
>
> Assuming it is so, i.e. the script doesn't do what it's intended to do
> (even though it might still have beneficial effect), the disclaimer that
> follows it is understandable -- an admission of complete and utter
> incompetence: "Microsoft provides programming examples for illustration
> only, without warranty either expressed or implied. This includes, but
> is not limited to, the implied warranties of merchantability or fitness
> for a particular purpose. This article assumes that you are familiar
> with the programming language that is being demonstrated and with the
> tools that are used to create and to debug procedures. Microsoft support
> engineers can help explain the functionality of a particular procedure.
> However, they will not modify these examples to provide added
> functionality or construct procedures to meet your specific requirements."
>
>
> Cheers,
>
> - Alf (laughing :-) )


bottom post. It all depends on the cirumstance.
After all, the accuracy and timeliness are more important than
'net-purism, isn't it ? :=)

MowGreen [MVP 2003-2008]
===============
*-343-* FDNY
Never Forgotten
===============




 
Reply With Quote
 
PA Bear [MS MVP]
Guest
Posts: n/a

 
      05-11-2008
Bite me.

Alf P. Steinbach wrote:
> * MowGreen [MVP]:
>> After all, the accuracy and timeliness are more important than
>> 'net-purism, isn't it ? :=)

>
> If you think so, then how about stopping spewing out INCORRECT
> information?
> (below)
> It's just too much when "Microsoft Valued Professional"'s such as yourself
> blindly copy, per monkey see monkey do principle, an obviously incorrect
> procedure as a bugfix for a big service pack which is itself a big set of
> bugfixes, and then fail to understand that when it's pointed out to you.
>
> One does wonder what sociological factors make this idiocy possible.


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
IE8 compatibility with PWA 2003 (SP3) and Project Pro 2003(SP3) momotaro Internet Explorer 0 05-03-2010 08:18 PM
RE: Error 0x87FF054F while installing SP3 TanduayCris Windows Update 0 12-27-2008 09:08 PM
internal error while installing xp sp3 ZaRoOd Windows Update 2 05-10-2008 05:59 PM
RE: Error 0x87FF054F while installing SP3 TaurArian Windows Update 3 05-09-2008 12:20 AM
Encountering a problem while installing Windows 2000 SP3 or SP4 express install Prathap Chithapuram Windows Update 2 09-05-2003 04:06 AM