ActiveSync won't detect my Pocket PC (T-Mobile PPC)

Software: PPC v4.20.0 (2004?) / ActiveSync 2.7.1
Hardware: T-Mobile Pocket PC Phone Edition

My hardware USB connection is good. I get a nice 'thunk' when I slip the
unit into the cradle. Windows sees this as:
Windows CE USB Devices
+== HTC USB Sync

But 'Get Connected' doesn't detect this.

Here's what happened. I recently reinstalled my OS. I just installed
ActiveSync 3.5 from the T-Mobile CD and synched up. Everything seemed to go
OK. But then I tried to drag a file onto the device using the explorer. I
got a message on the PPC saying incompatible ActiveSync. OK, that made
sense. I'd forrgotten that I'd upgraded my PPC OS and so the ActiveSync on
the CD was out-of-date. No problem. I downloaded the latest AS v3.7.1 from
the web and installed it. Since then it hasn't detected the PPC in the
cradle. I've rebooted both the PC and the PPC.

Thanks for any help which you can provide!

Joe Geretz

Some more info:

My PC platform is Win XP Pro.

If I go to File | Get Connected and then place the PPC in the cradle while
the initial dialog is displaying, then I hear the Windows USB 'kathunk', the
ActiveSync 'deedledee' and the dialog diappears. However ActiveSync still
says No Partnerships / Not Connected.

If I then go to File | Connection Settings, I see Status Connected under USB
but up at the top is says Status: Waiting for device to connect. Huh? These
are mutually exclusive! If I then click Get Connected, then USD immediately
reverts to Available, the connection attempts proceed and no connection is
found.

Also, under My Computer I can see the Mobile Device as a system folder, but
if I open it up I don't se any files.

Thanks for your help!

- Joe Geretz -



"Joseph Geretz" <> wrote in message
news:Oz5$...
> Software: PPC v4.20.0 (2004?) / ActiveSync 2.7.1
> Hardware: T-Mobile Pocket PC Phone Edition
>
> My hardware USB connection is good. I get a nice 'thunk' when I slip the
> unit into the cradle. Windows sees this as:
> Windows CE USB Devices
> +== HTC USB Sync
>
> But 'Get Connected' doesn't detect this.
>
> Here's what happened. I recently reinstalled my OS. I just installed
> ActiveSync 3.5 from the T-Mobile CD and synched up. Everything seemed to
go
> OK. But then I tried to drag a file onto the device using the explorer. I
> got a message on the PPC saying incompatible ActiveSync. OK, that made
> sense. I'd forrgotten that I'd upgraded my PPC OS and so the ActiveSync on
> the CD was out-of-date. No problem. I downloaded the latest AS v3.7.1 from
> the web and installed it. Since then it hasn't detected the PPC in the
> cradle. I've rebooted both the PC and the PPC.
>
> Thanks for any help which you can provide!
>
> Joe Geretz
>
>

YES! I got it - finally!

http://pdaphonehome.com/forums/showt...0&pagenumber=2

TNT2bluz writes:

Finally got to sync.

1) Uninstall Active Sync.
2) Uninstall HTC under Windows CE Devices in Device Manager
3) Unplugged USB
4) Reboot PC
5) Soft Reset PDA
6) Install Activesync to a different custom folder
7) Cradle phone and plug USB.

Finally.

I used basically the same methodology except after uninstalling ActiveSync I
manually deleted the left over folder from the file system. Then in Step 6 I
just installed to the default folder.

It seems that the crux of the problem is that uninstalling ActiveSync leaves
the folder in place with configuration files which were created after the
original install (standard MSI behavior). It's these leftover artifacts form
the previous install which cause problems for subsequent installs.

Hope this can be helpful to someone else in the same situation.

- Joe Geretz -

"Joseph Geretz" <> wrote in message
news:%...
> Some more info:
>
> My PC platform is Win XP Pro.
>
> If I go to File | Get Connected and then place the PPC in the cradle while
> the initial dialog is displaying, then I hear the Windows USB 'kathunk',
the
> ActiveSync 'deedledee' and the dialog diappears. However ActiveSync still
> says No Partnerships / Not Connected.
>
> If I then go to File | Connection Settings, I see Status Connected under
USB
> but up at the top is says Status: Waiting for device to connect. Huh?
These
> are mutually exclusive! If I then click Get Connected, then USD
immediately
> reverts to Available, the connection attempts proceed and no connection is
> found.
>
> Also, under My Computer I can see the Mobile Device as a system folder,
but
> if I open it up I don't se any files.
>
> Thanks for your help!
>
> - Joe Geretz -
>
>
>
> "Joseph Geretz" <> wrote in message
> news:Oz5$...
> > Software: PPC v4.20.0 (2004?) / ActiveSync 2.7.1
> > Hardware: T-Mobile Pocket PC Phone Edition
> >
> > My hardware USB connection is good. I get a nice 'thunk' when I slip the
> > unit into the cradle. Windows sees this as:
> > Windows CE USB Devices
> > +== HTC USB Sync
> >
> > But 'Get Connected' doesn't detect this.
> >
> > Here's what happened. I recently reinstalled my OS. I just installed
> > ActiveSync 3.5 from the T-Mobile CD and synched up. Everything seemed to
> go
> > OK. But then I tried to drag a file onto the device using the explorer.
I
> > got a message on the PPC saying incompatible ActiveSync. OK, that made
> > sense. I'd forrgotten that I'd upgraded my PPC OS and so the ActiveSync
on
> > the CD was out-of-date. No problem. I downloaded the latest AS v3.7.1
from
> > the web and installed it. Since then it hasn't detected the PPC in the
> > cradle. I've rebooted both the PC and the PPC.
> >
> > Thanks for any help which you can provide!
> >
> > Joe Geretz
> >
> >
>
>