automatic updates fail to install

I have had to reinstall winXP Pro on two machines on my network recently. On
both machines, after the reinstall was complete, I rebooted and logged into
the network without any problems. Windowsupdate immediately found 1 update to
install. I believe it was Windows Installer 3.0. It installed without any
problems. After a reboot, Windowsupdate found around 50 new updates to
install, but no matter what I try it fails every time.
Here is a portion of my windowsupdate.log file.
2007-07-24 09:20:34:000 816 dec Handler Attempting to create remote handler
process as MHS_SPECTRUM_SE\Mike in session 0
2007-07-24 09:20:36:781 3696 e74 Misc =========== Logging initialized
(build: 7.0.6000.374, tz: -0500) ===========
2007-07-24 09:20:36:781 3696 e74 Misc = Process:
C:\WINDOWS\system32\wuauclt.exe
2007-07-24 09:20:36:781 3696 e74 AUClnt FATAL: Error: 0x80004002. wuauclt
handler: failed to spawn COM server
2007-07-24 09:20:36:875 816 dec Handler FATAL: 0x80004002: ERROR: Remote
update handler container process created (PID: 3696), but exited before
signaling event
2007-07-24 09:20:38:968 816 dec Agent * WARNING: Exit code = 0x80004002
2007-07-24 09:20:38:968 816 dec Agent *********
2007-07-24 09:20:38:968 816 dec Agent ** END ** Agent: Installing
updates [CallerId = AutomaticUpdates]
2007-07-24 09:20:38:968 816 dec Agent *************
2007-07-24 09:20:38:968 816 dec Agent WARNING: WU client failed installing
updates with error 0x80004002
2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
[UpdateId = {707E6500-81C1-4165-8C43-631E09891716}]
2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
[UpdateId = {9785760A-3232-40E0-8F2A-03FB932BF3CA}]
2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
[UpdateId = {E2E1C013-B99A-4683-921C-B99663F3F8ED}]
2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped

Anyone have any ideas how I can make this work again? Thanks...

Mike

I am having this exact same problem. I just upgraded to XP Pro and I have 77
updates that will not install.

"mfruech" wrote:

> I have had to reinstall winXP Pro on two machines on my network recently. On
> both machines, after the reinstall was complete, I rebooted and logged into
> the network without any problems. Windowsupdate immediately found 1 update to
> install. I believe it was Windows Installer 3.0. It installed without any
> problems. After a reboot, Windowsupdate found around 50 new updates to
> install, but no matter what I try it fails every time.
> Here is a portion of my windowsupdate.log file.
> 2007-07-24 09:20:34:000 816 dec Handler Attempting to create remote handler
> process as MHS_SPECTRUM_SE\Mike in session 0
> 2007-07-24 09:20:36:781 3696 e74 Misc =========== Logging initialized
> (build: 7.0.6000.374, tz: -0500) ===========
> 2007-07-24 09:20:36:781 3696 e74 Misc = Process:
> C:\WINDOWS\system32\wuauclt.exe
> 2007-07-24 09:20:36:781 3696 e74 AUClnt FATAL: Error: 0x80004002. wuauclt
> handler: failed to spawn COM server
> 2007-07-24 09:20:36:875 816 dec Handler FATAL: 0x80004002: ERROR: Remote
> update handler container process created (PID: 3696), but exited before
> signaling event
> 2007-07-24 09:20:38:968 816 dec Agent * WARNING: Exit code = 0x80004002
> 2007-07-24 09:20:38:968 816 dec Agent *********
> 2007-07-24 09:20:38:968 816 dec Agent ** END ** Agent: Installing
> updates [CallerId = AutomaticUpdates]
> 2007-07-24 09:20:38:968 816 dec Agent *************
> 2007-07-24 09:20:38:968 816 dec Agent WARNING: WU client failed installing
> updates with error 0x80004002
> 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> [UpdateId = {707E6500-81C1-4165-8C43-631E09891716}]
> 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> [UpdateId = {9785760A-3232-40E0-8F2A-03FB932BF3CA}]
> 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> [UpdateId = {E2E1C013-B99A-4683-921C-B99663F3F8ED}]
> 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
>
> Anyone have any ideas how I can make this work again? Thanks...
>
> Mike

Same here, reinstalled OS got the 1st update and now all the rest fail. With
no reasoning attatched.

"whirphy" wrote:

> I am having this exact same problem. I just upgraded to XP Pro and I have 77
> updates that will not install.
>
> "mfruech" wrote:
>
> > I have had to reinstall winXP Pro on two machines on my network recently. On
> > both machines, after the reinstall was complete, I rebooted and logged into
> > the network without any problems. Windowsupdate immediately found 1 update to
> > install. I believe it was Windows Installer 3.0. It installed without any
> > problems. After a reboot, Windowsupdate found around 50 new updates to
> > install, but no matter what I try it fails every time.
> > Here is a portion of my windowsupdate.log file.
> > 2007-07-24 09:20:34:000 816 dec Handler Attempting to create remote handler
> > process as MHS_SPECTRUM_SE\Mike in session 0
> > 2007-07-24 09:20:36:781 3696 e74 Misc =========== Logging initialized
> > (build: 7.0.6000.374, tz: -0500) ===========
> > 2007-07-24 09:20:36:781 3696 e74 Misc = Process:
> > C:\WINDOWS\system32\wuauclt.exe
> > 2007-07-24 09:20:36:781 3696 e74 AUClnt FATAL: Error: 0x80004002. wuauclt
> > handler: failed to spawn COM server
> > 2007-07-24 09:20:36:875 816 dec Handler FATAL: 0x80004002: ERROR: Remote
> > update handler container process created (PID: 3696), but exited before
> > signaling event
> > 2007-07-24 09:20:38:968 816 dec Agent * WARNING: Exit code = 0x80004002
> > 2007-07-24 09:20:38:968 816 dec Agent *********
> > 2007-07-24 09:20:38:968 816 dec Agent ** END ** Agent: Installing
> > updates [CallerId = AutomaticUpdates]
> > 2007-07-24 09:20:38:968 816 dec Agent *************
> > 2007-07-24 09:20:38:968 816 dec Agent WARNING: WU client failed installing
> > updates with error 0x80004002
> > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > [UpdateId = {707E6500-81C1-4165-8C43-631E09891716}]
> > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > [UpdateId = {9785760A-3232-40E0-8F2A-03FB932BF3CA}]
> > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > [UpdateId = {E2E1C013-B99A-4683-921C-B99663F3F8ED}]
> > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> >
> > Anyone have any ideas how I can make this work again? Thanks...
> >
> > Mike

I have finally found the fix for my particular problem. I downloaded the new
Windows Update agent at http://support.microsoft.com/kb/927891 and ran it
with the /wuforce switch. That forced the reinstallation of all wu agent
files. After a reboot, all is well. Hope this helps someone.

Mike

"RHDIT" wrote:

> Same here, reinstalled OS got the 1st update and now all the rest fail. With
> no reasoning attatched.
>
> "whirphy" wrote:
>
> > I am having this exact same problem. I just upgraded to XP Pro and I have 77
> > updates that will not install.
> >
> > "mfruech" wrote:
> >
> > > I have had to reinstall winXP Pro on two machines on my network recently. On
> > > both machines, after the reinstall was complete, I rebooted and logged into
> > > the network without any problems. Windowsupdate immediately found 1 update to
> > > install. I believe it was Windows Installer 3.0. It installed without any
> > > problems. After a reboot, Windowsupdate found around 50 new updates to
> > > install, but no matter what I try it fails every time.
> > > Here is a portion of my windowsupdate.log file.
> > > 2007-07-24 09:20:34:000 816 dec Handler Attempting to create remote handler
> > > process as MHS_SPECTRUM_SE\Mike in session 0
> > > 2007-07-24 09:20:36:781 3696 e74 Misc =========== Logging initialized
> > > (build: 7.0.6000.374, tz: -0500) ===========
> > > 2007-07-24 09:20:36:781 3696 e74 Misc = Process:
> > > C:\WINDOWS\system32\wuauclt.exe
> > > 2007-07-24 09:20:36:781 3696 e74 AUClnt FATAL: Error: 0x80004002. wuauclt
> > > handler: failed to spawn COM server
> > > 2007-07-24 09:20:36:875 816 dec Handler FATAL: 0x80004002: ERROR: Remote
> > > update handler container process created (PID: 3696), but exited before
> > > signaling event
> > > 2007-07-24 09:20:38:968 816 dec Agent * WARNING: Exit code = 0x80004002
> > > 2007-07-24 09:20:38:968 816 dec Agent *********
> > > 2007-07-24 09:20:38:968 816 dec Agent ** END ** Agent: Installing
> > > updates [CallerId = AutomaticUpdates]
> > > 2007-07-24 09:20:38:968 816 dec Agent *************
> > > 2007-07-24 09:20:38:968 816 dec Agent WARNING: WU client failed installing
> > > updates with error 0x80004002
> > > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > > [UpdateId = {707E6500-81C1-4165-8C43-631E09891716}]
> > > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> > > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > > [UpdateId = {9785760A-3232-40E0-8F2A-03FB932BF3CA}]
> > > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> > > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > > [UpdateId = {E2E1C013-B99A-4683-921C-B99663F3F8ED}]
> > > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> > >
> > > Anyone have any ideas how I can make this work again? Thanks...
> > >
> > > Mike

"mfruech" wrote:

> I have finally found the fix for my particular problem. I downloaded the new
> Windows Update agent at http://support.microsoft.com/kb/927891 and ran it
> with the /wuforce switch. That forced the reinstallation of all wu agent
> files. After a reboot, all is well. Hope this helps someone.
>
> Mike

Mike,

I dl'd the above file as WindowsXP-KB927891-v3-x86-ENU.exe. Then I used
your switch as:
WindowsXP-KB927891-v3-x86-ENU.exe /wuforce /wuforce

The result was a list of possible switches which I assume indicates that
/wuforce is NOT a viable switch...there is /overwriteoem...

soooooo....what did you do that I didn't...or vice versa???

Thanks,

Chas

I have a probable solution. I'm not on a network so things may be a little
different and therefore may not work the same. In my case I have multiple
systems on multiple hard drives and have the following problems on all. If I
do a repair installation I can never get the windows updates. They
download, but fail to install. To repair this problem the dll files
associated with the windows update program have to be registered. To do this
you'll need to run regsvr32. Go start then run:
regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wups2.dll
regsvr32 wuweb.dll

If networked machines operate under the same principles as stand alone
machines, this will be the solution to your problem

"mfruech" wrote:

> I have had to reinstall winXP Pro on two machines on my network recently. On
> both machines, after the reinstall was complete, I rebooted and logged into
> the network without any problems. Windowsupdate immediately found 1 update to
> install. I believe it was Windows Installer 3.0. It installed without any
> problems. After a reboot, Windowsupdate found around 50 new updates to
> install, but no matter what I try it fails every time.
> Here is a portion of my windowsupdate.log file.
> 2007-07-24 09:20:34:000 816 dec Handler Attempting to create remote handler
> process as MHS_SPECTRUM_SE\Mike in session 0
> 2007-07-24 09:20:36:781 3696 e74 Misc =========== Logging initialized
> (build: 7.0.6000.374, tz: -0500) ===========
> 2007-07-24 09:20:36:781 3696 e74 Misc = Process:
> C:\WINDOWS\system32\wuauclt.exe
> 2007-07-24 09:20:36:781 3696 e74 AUClnt FATAL: Error: 0x80004002. wuauclt
> handler: failed to spawn COM server
> 2007-07-24 09:20:36:875 816 dec Handler FATAL: 0x80004002: ERROR: Remote
> update handler container process created (PID: 3696), but exited before
> signaling event
> 2007-07-24 09:20:38:968 816 dec Agent * WARNING: Exit code = 0x80004002
> 2007-07-24 09:20:38:968 816 dec Agent *********
> 2007-07-24 09:20:38:968 816 dec Agent ** END ** Agent: Installing
> updates [CallerId = AutomaticUpdates]
> 2007-07-24 09:20:38:968 816 dec Agent *************
> 2007-07-24 09:20:38:968 816 dec Agent WARNING: WU client failed installing
> updates with error 0x80004002
> 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> [UpdateId = {707E6500-81C1-4165-8C43-631E09891716}]
> 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> [UpdateId = {9785760A-3232-40E0-8F2A-03FB932BF3CA}]
> 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> [UpdateId = {E2E1C013-B99A-4683-921C-B99663F3F8ED}]
> 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
>
> Anyone have any ideas how I can make this work again? Thanks...
>
> Mike

This worked for me Thanks.

"mfruech" wrote:

> I have finally found the fix for my particular problem. I downloaded the new
> Windows Update agent at http://support.microsoft.com/kb/927891 and ran it
> with the /wuforce switch. That forced the reinstallation of all wu agent
> files. After a reboot, all is well. Hope this helps someone.
>
> Mike
>
> "RHDIT" wrote:
>
> > Same here, reinstalled OS got the 1st update and now all the rest fail. With
> > no reasoning attatched.
> >
> > "whirphy" wrote:
> >
> > > I am having this exact same problem. I just upgraded to XP Pro and I have 77
> > > updates that will not install.
> > >
> > > "mfruech" wrote:
> > >
> > > > I have had to reinstall winXP Pro on two machines on my network recently. On
> > > > both machines, after the reinstall was complete, I rebooted and logged into
> > > > the network without any problems. Windowsupdate immediately found 1 update to
> > > > install. I believe it was Windows Installer 3.0. It installed without any
> > > > problems. After a reboot, Windowsupdate found around 50 new updates to
> > > > install, but no matter what I try it fails every time.
> > > > Here is a portion of my windowsupdate.log file.
> > > > 2007-07-24 09:20:34:000 816 dec Handler Attempting to create remote handler
> > > > process as MHS_SPECTRUM_SE\Mike in session 0
> > > > 2007-07-24 09:20:36:781 3696 e74 Misc =========== Logging initialized
> > > > (build: 7.0.6000.374, tz: -0500) ===========
> > > > 2007-07-24 09:20:36:781 3696 e74 Misc = Process:
> > > > C:\WINDOWS\system32\wuauclt.exe
> > > > 2007-07-24 09:20:36:781 3696 e74 AUClnt FATAL: Error: 0x80004002. wuauclt
> > > > handler: failed to spawn COM server
> > > > 2007-07-24 09:20:36:875 816 dec Handler FATAL: 0x80004002: ERROR: Remote
> > > > update handler container process created (PID: 3696), but exited before
> > > > signaling event
> > > > 2007-07-24 09:20:38:968 816 dec Agent * WARNING: Exit code = 0x80004002
> > > > 2007-07-24 09:20:38:968 816 dec Agent *********
> > > > 2007-07-24 09:20:38:968 816 dec Agent ** END ** Agent: Installing
> > > > updates [CallerId = AutomaticUpdates]
> > > > 2007-07-24 09:20:38:968 816 dec Agent *************
> > > > 2007-07-24 09:20:38:968 816 dec Agent WARNING: WU client failed installing
> > > > updates with error 0x80004002
> > > > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > > > [UpdateId = {707E6500-81C1-4165-8C43-631E09891716}]
> > > > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> > > > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > > > [UpdateId = {9785760A-3232-40E0-8F2A-03FB932BF3CA}]
> > > > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> > > > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > > > [UpdateId = {E2E1C013-B99A-4683-921C-B99663F3F8ED}]
> > > > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> > > >
> > > > Anyone have any ideas how I can make this work again? Thanks...
> > > >
> > > > Mike

Worked for me too.

Thanks a lot mfruech & mfruech!!!!! you really helped me a lot...

thanks again.

Telmadog

This is definitely THE solution and should be sticky.

Nice work and thanks a lot!

"fnlvn2" wrote:

> I have a probable solution. I'm not on a network so things may be a little
> different and therefore may not work the same. In my case I have multiple
> systems on multiple hard drives and have the following problems on all. If I
> do a repair installation I can never get the windows updates. They
> download, but fail to install. To repair this problem the dll files
> associated with the windows update program have to be registered. To do this
> you'll need to run regsvr32. Go start then run:
> regsvr32 wuapi.dll
> regsvr32 wuaueng.dll
> regsvr32 wuaueng1.dll
> regsvr32 wucltui.dll
> regsvr32 wups.dll
> regsvr32 wups2.dll
> regsvr32 wuweb.dll
>
> If networked machines operate under the same principles as stand alone
> machines, this will be the solution to your problem
>
> "mfruech" wrote:
>
> > I have had to reinstall winXP Pro on two machines on my network recently. On
> > both machines, after the reinstall was complete, I rebooted and logged into
> > the network without any problems. Windowsupdate immediately found 1 update to
> > install. I believe it was Windows Installer 3.0. It installed without any
> > problems. After a reboot, Windowsupdate found around 50 new updates to
> > install, but no matter what I try it fails every time.
> > Here is a portion of my windowsupdate.log file.
> > 2007-07-24 09:20:34:000 816 dec Handler Attempting to create remote handler
> > process as MHS_SPECTRUM_SE\Mike in session 0
> > 2007-07-24 09:20:36:781 3696 e74 Misc =========== Logging initialized
> > (build: 7.0.6000.374, tz: -0500) ===========
> > 2007-07-24 09:20:36:781 3696 e74 Misc = Process:
> > C:\WINDOWS\system32\wuauclt.exe
> > 2007-07-24 09:20:36:781 3696 e74 AUClnt FATAL: Error: 0x80004002. wuauclt
> > handler: failed to spawn COM server
> > 2007-07-24 09:20:36:875 816 dec Handler FATAL: 0x80004002: ERROR: Remote
> > update handler container process created (PID: 3696), but exited before
> > signaling event
> > 2007-07-24 09:20:38:968 816 dec Agent * WARNING: Exit code = 0x80004002
> > 2007-07-24 09:20:38:968 816 dec Agent *********
> > 2007-07-24 09:20:38:968 816 dec Agent ** END ** Agent: Installing
> > updates [CallerId = AutomaticUpdates]
> > 2007-07-24 09:20:38:968 816 dec Agent *************
> > 2007-07-24 09:20:38:968 816 dec Agent WARNING: WU client failed installing
> > updates with error 0x80004002
> > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > [UpdateId = {707E6500-81C1-4165-8C43-631E09891716}]
> > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > [UpdateId = {9785760A-3232-40E0-8F2A-03FB932BF3CA}]
> > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> > 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> > [UpdateId = {E2E1C013-B99A-4683-921C-B99663F3F8ED}]
> > 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> >
> > Anyone have any ideas how I can make this work again? Thanks...
> >
> > Mike

Guys,
if you guys are not impatient you can download and install them manually.
Goto the update site and locate each update individually and run them from
the site... I did... all 93 updates.....

Good luck to you all


"mfruech" wrote:

> I have had to reinstall winXP Pro on two machines on my network recently. On
> both machines, after the reinstall was complete, I rebooted and logged into
> the network without any problems. Windowsupdate immediately found 1 update to
> install. I believe it was Windows Installer 3.0. It installed without any
> problems. After a reboot, Windowsupdate found around 50 new updates to
> install, but no matter what I try it fails every time.
> Here is a portion of my windowsupdate.log file.
> 2007-07-24 09:20:34:000 816 dec Handler Attempting to create remote handler
> process as MHS_SPECTRUM_SE\Mike in session 0
> 2007-07-24 09:20:36:781 3696 e74 Misc =========== Logging initialized
> (build: 7.0.6000.374, tz: -0500) ===========
> 2007-07-24 09:20:36:781 3696 e74 Misc = Process:
> C:\WINDOWS\system32\wuauclt.exe
> 2007-07-24 09:20:36:781 3696 e74 AUClnt FATAL: Error: 0x80004002. wuauclt
> handler: failed to spawn COM server
> 2007-07-24 09:20:36:875 816 dec Handler FATAL: 0x80004002: ERROR: Remote
> update handler container process created (PID: 3696), but exited before
> signaling event
> 2007-07-24 09:20:38:968 816 dec Agent * WARNING: Exit code = 0x80004002
> 2007-07-24 09:20:38:968 816 dec Agent *********
> 2007-07-24 09:20:38:968 816 dec Agent ** END ** Agent: Installing
> updates [CallerId = AutomaticUpdates]
> 2007-07-24 09:20:38:968 816 dec Agent *************
> 2007-07-24 09:20:38:968 816 dec Agent WARNING: WU client failed installing
> updates with error 0x80004002
> 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> [UpdateId = {707E6500-81C1-4165-8C43-631E09891716}]
> 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> [UpdateId = {9785760A-3232-40E0-8F2A-03FB932BF3CA}]
> 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
> 2007-07-24 09:20:38:968 816 32c AU >>## RESUMED ## AU: Installing update
> [UpdateId = {E2E1C013-B99A-4683-921C-B99663F3F8ED}]
> 2007-07-24 09:20:38:968 816 32c AU # WARNING: Install skipped
>
> Anyone have any ideas how I can make this work again? Thanks...
>
> Mike