Axim X51 will not connect

Microsoft Active Sync has been working very well connecting my Axim X51 until
recently. Now I get a message "connecting", then no progress; finally, "no
partnership established." Active Sync troubleshooter does not help. I have
also checked my firewall, it indicates that all active sync programs have
full access. I first encountered this problem on my home desktop (months
ago), but no problem at the office. Now the Axim won't connect with either
one.
--
Clare

Hi Clare,

Have you tried synchronizing after performing a soft reset? Also which
version of ActiveSync are you using?

--
Regards,
Raj Pillai
Microsoft MVP - Mobile Devices
http://www.pocketpcfaq.com/raj


"Pastor Clare" <> wrote in message
news:FB09EA06-B557-4A8C-AD6B-...
> Microsoft Active Sync has been working very well connecting my Axim X51
> until
> recently. Now I get a message "connecting", then no progress; finally, "no
> partnership established." Active Sync troubleshooter does not help. I have
> also checked my firewall, it indicates that all active sync programs have
> full access. I first encountered this problem on my home desktop (months
> ago), but no problem at the office. Now the Axim won't connect with either
> one.
> --
> Clare

Yes, I have tried soft reset. Active Sync 4.1 failed, so I downloaded 4.5,
but it doesn't work either.
--
Clare


"Raj Pillai" wrote:

> Hi Clare,
>
> Have you tried synchronizing after performing a soft reset? Also which
> version of ActiveSync are you using?
>
> --
> Regards,
> Raj Pillai
> Microsoft MVP - Mobile Devices
> http://www.pocketpcfaq.com/raj
>
>
> "Pastor Clare" <> wrote in message
> news:FB09EA06-B557-4A8C-AD6B-...
> > Microsoft Active Sync has been working very well connecting my Axim X51
> > until
> > recently. Now I get a message "connecting", then no progress; finally, "no
> > partnership established." Active Sync troubleshooter does not help. I have
> > also checked my firewall, it indicates that all active sync programs have
> > full access. I first encountered this problem on my home desktop (months
> > ago), but no problem at the office. Now the Axim won't connect with either
> > one.
> > --
> > Clare
>
>

Hi,
Do you have a software firewall that could be preventing the connection?


--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.tabletpctalk.com
http://www.pocketpctalk.com
http://www.mobilitytalk.com

Windows Mobile Device Center FAQs -
http://www.pocketpcfaq.com/faqs/wmdc/index.htm
ActiveSync Troubleshooting Guide -
http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm

"Pastor Clare" <> wrote in message
news:04FEE182-0A11-4FEA-9B1D-...
> Yes, I have tried soft reset. Active Sync 4.1 failed, so I downloaded 4.5,
> but it doesn't work either.
> --
> Clare
>
>
> "Raj Pillai" wrote:
>
>> Hi Clare,
>>
>> Have you tried synchronizing after performing a soft reset? Also which
>> version of ActiveSync are you using?
>>
>> --
>> Regards,
>> Raj Pillai
>> Microsoft MVP - Mobile Devices
>> http://www.pocketpcfaq.com/raj
>>
>>
>> "Pastor Clare" <> wrote in message
>> news:FB09EA06-B557-4A8C-AD6B-...
>> > Microsoft Active Sync has been working very well connecting my Axim X51
>> > until
>> > recently. Now I get a message "connecting", then no progress; finally,
>> > "no
>> > partnership established." Active Sync troubleshooter does not help. I
>> > have
>> > also checked my firewall, it indicates that all active sync programs
>> > have
>> > full access. I first encountered this problem on my home desktop
>> > (months
>> > ago), but no problem at the office. Now the Axim won't connect with
>> > either
>> > one.
>> > --
>> > Clare
>>
>>

I use McAffee Security Center with the Personal Firewall running. The
settings indicate that all 4 of the Active Sync programs have full access to
the computer. I tried turning off the firewall, but that didn't solve my
problem.
--
Clare


"Chris De Herrera" wrote:

> Hi,
> Do you have a software firewall that could be preventing the connection?
>
>
> --
> Chris De Herrera
> http://www.pocketpcfaq.com
> http://www.tabletpctalk.com
> http://www.pocketpctalk.com
> http://www.mobilitytalk.com
>
> Windows Mobile Device Center FAQs -
> http://www.pocketpcfaq.com/faqs/wmdc/index.htm
> ActiveSync Troubleshooting Guide -
> http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
>
> "Pastor Clare" <> wrote in message
> news:04FEE182-0A11-4FEA-9B1D-...
> > Yes, I have tried soft reset. Active Sync 4.1 failed, so I downloaded 4.5,
> > but it doesn't work either.
> > --
> > Clare
> >
> >
> > "Raj Pillai" wrote:
> >
> >> Hi Clare,
> >>
> >> Have you tried synchronizing after performing a soft reset? Also which
> >> version of ActiveSync are you using?
> >>
> >> --
> >> Regards,
> >> Raj Pillai
> >> Microsoft MVP - Mobile Devices
> >> http://www.pocketpcfaq.com/raj
> >>
> >>
> >> "Pastor Clare" <> wrote in message
> >> news:FB09EA06-B557-4A8C-AD6B-...
> >> > Microsoft Active Sync has been working very well connecting my Axim X51
> >> > until
> >> > recently. Now I get a message "connecting", then no progress; finally,
> >> > "no
> >> > partnership established." Active Sync troubleshooter does not help. I
> >> > have
> >> > also checked my firewall, it indicates that all active sync programs
> >> > have
> >> > full access. I first encountered this problem on my home desktop
> >> > (months
> >> > ago), but no problem at the office. Now the Axim won't connect with
> >> > either
> >> > one.
> >> > --
> >> > Clare
> >>
> >>
>
>
>

Hi,
Are you able to see the network connection while the Axim is connected?
This can be checked by using a command line and issue the command ROUTE
PRINT.


--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.tabletpctalk.com
http://www.pocketpctalk.com
http://www.mobilitytalk.com

Windows Mobile Device Center FAQs -
http://www.pocketpcfaq.com/faqs/wmdc/index.htm
ActiveSync Troubleshooting Guide -
http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm

"Pastor Clare" <> wrote in message
news:B43FDA98-7EDC-4E01-BB9B-...
>I use McAffee Security Center with the Personal Firewall running. The
> settings indicate that all 4 of the Active Sync programs have full access
> to
> the computer. I tried turning off the firewall, but that didn't solve my
> problem.
> --
> Clare
>
>
> "Chris De Herrera" wrote:
>
>> Hi,
>> Do you have a software firewall that could be preventing the connection?
>>
>>
>> --
>> Chris De Herrera
>> http://www.pocketpcfaq.com
>> http://www.tabletpctalk.com
>> http://www.pocketpctalk.com
>> http://www.mobilitytalk.com
>>
>> Windows Mobile Device Center FAQs -
>> http://www.pocketpcfaq.com/faqs/wmdc/index.htm
>> ActiveSync Troubleshooting Guide -
>> http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
>>
>> "Pastor Clare" <> wrote in message
>> news:04FEE182-0A11-4FEA-9B1D-...
>> > Yes, I have tried soft reset. Active Sync 4.1 failed, so I downloaded
>> > 4.5,
>> > but it doesn't work either.
>> > --
>> > Clare
>> >
>> >
>> > "Raj Pillai" wrote:
>> >
>> >> Hi Clare,
>> >>
>> >> Have you tried synchronizing after performing a soft reset? Also
>> >> which
>> >> version of ActiveSync are you using?
>> >>
>> >> --
>> >> Regards,
>> >> Raj Pillai
>> >> Microsoft MVP - Mobile Devices
>> >> http://www.pocketpcfaq.com/raj
>> >>
>> >>
>> >> "Pastor Clare" <> wrote in
>> >> message
>> >> news:FB09EA06-B557-4A8C-AD6B-...
>> >> > Microsoft Active Sync has been working very well connecting my Axim
>> >> > X51
>> >> > until
>> >> > recently. Now I get a message "connecting", then no progress;
>> >> > finally,
>> >> > "no
>> >> > partnership established." Active Sync troubleshooter does not help.
>> >> > I
>> >> > have
>> >> > also checked my firewall, it indicates that all active sync programs
>> >> > have
>> >> > full access. I first encountered this problem on my home desktop
>> >> > (months
>> >> > ago), but no problem at the office. Now the Axim won't connect with
>> >> > either
>> >> > one.
>> >> > --
>> >> > Clare
>> >>
>> >>
>>
>>
>>

I've been gone for a few days. Thank you for responding, Chris.
Route Print brings up a split-second dos screen, but not enough time to
recognize any text.
When I click on My Computer, all I see for that port is Mobile Device. It
doesn't recognize it correctly, apparently.
--
Clare


"Chris De Herrera" wrote:

> Hi,
> Are you able to see the network connection while the Axim is connected?
> This can be checked by using a command line and issue the command ROUTE
> PRINT.
>
>
> --
> Chris De Herrera
> http://www.pocketpcfaq.com
> http://www.tabletpctalk.com
> http://www.pocketpctalk.com
> http://www.mobilitytalk.com
>
> Windows Mobile Device Center FAQs -
> http://www.pocketpcfaq.com/faqs/wmdc/index.htm
> ActiveSync Troubleshooting Guide -
> http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
>
> "Pastor Clare" <> wrote in message
> news:B43FDA98-7EDC-4E01-BB9B-...
> >I use McAffee Security Center with the Personal Firewall running. The
> > settings indicate that all 4 of the Active Sync programs have full access
> > to
> > the computer. I tried turning off the firewall, but that didn't solve my
> > problem.
> > --
> > Clare
> >
> >
> > "Chris De Herrera" wrote:
> >
> >> Hi,
> >> Do you have a software firewall that could be preventing the connection?
> >>
> >>
> >> --
> >> Chris De Herrera
> >> http://www.pocketpcfaq.com
> >> http://www.tabletpctalk.com
> >> http://www.pocketpctalk.com
> >> http://www.mobilitytalk.com
> >>
> >> Windows Mobile Device Center FAQs -
> >> http://www.pocketpcfaq.com/faqs/wmdc/index.htm
> >> ActiveSync Troubleshooting Guide -
> >> http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
> >>
> >> "Pastor Clare" <> wrote in message
> >> news:04FEE182-0A11-4FEA-9B1D-...
> >> > Yes, I have tried soft reset. Active Sync 4.1 failed, so I downloaded
> >> > 4.5,
> >> > but it doesn't work either.
> >> > --
> >> > Clare
> >> >
> >> >
> >> > "Raj Pillai" wrote:
> >> >
> >> >> Hi Clare,
> >> >>
> >> >> Have you tried synchronizing after performing a soft reset? Also
> >> >> which
> >> >> version of ActiveSync are you using?
> >> >>
> >> >> --
> >> >> Regards,
> >> >> Raj Pillai
> >> >> Microsoft MVP - Mobile Devices
> >> >> http://www.pocketpcfaq.com/raj
> >> >>
> >> >>
> >> >> "Pastor Clare" <> wrote in
> >> >> message
> >> >> news:FB09EA06-B557-4A8C-AD6B-...
> >> >> > Microsoft Active Sync has been working very well connecting my Axim
> >> >> > X51
> >> >> > until
> >> >> > recently. Now I get a message "connecting", then no progress;
> >> >> > finally,
> >> >> > "no
> >> >> > partnership established." Active Sync troubleshooter does not help.
> >> >> > I
> >> >> > have
> >> >> > also checked my firewall, it indicates that all active sync programs
> >> >> > have
> >> >> > full access. I first encountered this problem on my home desktop
> >> >> > (months
> >> >> > ago), but no problem at the office. Now the Axim won't connect with
> >> >> > either
> >> >> > one.
> >> >> > --
> >> >> > Clare
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>

Open an MS-DOS window and type 'route print' there (that's what Chris meant
by "using a command line"). The window won't close until you close it by
typing 'exit'.

Paul T.

"Pastor Clare" <> wrote in message
news:27F0455D-A3C3-46BB-A4CC-...
> I've been gone for a few days. Thank you for responding, Chris.
> Route Print brings up a split-second dos screen, but not enough time to
> recognize any text.
> When I click on My Computer, all I see for that port is Mobile Device. It
> doesn't recognize it correctly, apparently.
> --
> Clare
>
>
> "Chris De Herrera" wrote:
>
>> Hi,
>> Are you able to see the network connection while the Axim is connected?
>> This can be checked by using a command line and issue the command ROUTE
>> PRINT.
>>
>>
>> --
>> Chris De Herrera
>> http://www.pocketpcfaq.com
>> http://www.tabletpctalk.com
>> http://www.pocketpctalk.com
>> http://www.mobilitytalk.com
>>
>> Windows Mobile Device Center FAQs -
>> http://www.pocketpcfaq.com/faqs/wmdc/index.htm
>> ActiveSync Troubleshooting Guide -
>> http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
>>
>> "Pastor Clare" <> wrote in message
>> news:B43FDA98-7EDC-4E01-BB9B-...
>> >I use McAffee Security Center with the Personal Firewall running. The
>> > settings indicate that all 4 of the Active Sync programs have full
>> > access
>> > to
>> > the computer. I tried turning off the firewall, but that didn't solve
>> > my
>> > problem.
>> > --
>> > Clare
>> >
>> >
>> > "Chris De Herrera" wrote:
>> >
>> >> Hi,
>> >> Do you have a software firewall that could be preventing the
>> >> connection?
>> >>
>> >>
>> >> --
>> >> Chris De Herrera
>> >> http://www.pocketpcfaq.com
>> >> http://www.tabletpctalk.com
>> >> http://www.pocketpctalk.com
>> >> http://www.mobilitytalk.com
>> >>
>> >> Windows Mobile Device Center FAQs -
>> >> http://www.pocketpcfaq.com/faqs/wmdc/index.htm
>> >> ActiveSync Troubleshooting Guide -
>> >> http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
>> >>
>> >> "Pastor Clare" <> wrote in
>> >> message
>> >> news:04FEE182-0A11-4FEA-9B1D-...
>> >> > Yes, I have tried soft reset. Active Sync 4.1 failed, so I
>> >> > downloaded
>> >> > 4.5,
>> >> > but it doesn't work either.
>> >> > --
>> >> > Clare
>> >> >
>> >> >
>> >> > "Raj Pillai" wrote:
>> >> >
>> >> >> Hi Clare,
>> >> >>
>> >> >> Have you tried synchronizing after performing a soft reset? Also
>> >> >> which
>> >> >> version of ActiveSync are you using?
>> >> >>
>> >> >> --
>> >> >> Regards,
>> >> >> Raj Pillai
>> >> >> Microsoft MVP - Mobile Devices
>> >> >> http://www.pocketpcfaq.com/raj
>> >> >>
>> >> >>
>> >> >> "Pastor Clare" <> wrote in
>> >> >> message
>> >> >> news:FB09EA06-B557-4A8C-AD6B-...
>> >> >> > Microsoft Active Sync has been working very well connecting my
>> >> >> > Axim
>> >> >> > X51
>> >> >> > until
>> >> >> > recently. Now I get a message "connecting", then no progress;
>> >> >> > finally,
>> >> >> > "no
>> >> >> > partnership established." Active Sync troubleshooter does not
>> >> >> > help.
>> >> >> > I
>> >> >> > have
>> >> >> > also checked my firewall, it indicates that all active sync
>> >> >> > programs
>> >> >> > have
>> >> >> > full access. I first encountered this problem on my home desktop
>> >> >> > (months
>> >> >> > ago), but no problem at the office. Now the Axim won't connect
>> >> >> > with
>> >> >> > either
>> >> >> > one.
>> >> >> > --
>> >> >> > Clare
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>

Route Print I do not understand. But here is the result:
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.100 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
169.254.2.0 255.255.255.0 169.254.2.2 169.254.2.2 30
169.254.2.2 255.255.255.255 127.0.0.1 127.0.0.1 30
169.254.255.255 255.255.255.255 169.254.2.2 169.254.2.2 30
192.168.1.0 255.255.255.0 192.168.1.100 192.168.1.100 20
192.168.1.100 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.1.255 255.255.255.255 192.168.1.100 192.168.1.100 20
224.0.0.0 240.0.0.0 169.254.2.2 169.254.2.2 30
224.0.0.0 240.0.0.0 102.168.1.100 102.168.1.100 20
255.255.255.255 255.255.255.255 169.254.2.2 169.254.2.2 1
255.255.255.255 255.255.255.255 192.168.1.100 192.168.1.100 1

--
Clare


"Paul G. Tobey [eMVP]" wrote:

> Open an MS-DOS window and type 'route print' there (that's what Chris meant
> by "using a command line"). The window won't close until you close it by
> typing 'exit'.
>
> Paul T.
>
> "Pastor Clare" <> wrote in message
> news:27F0455D-A3C3-46BB-A4CC-...
> > I've been gone for a few days. Thank you for responding, Chris.
> > Route Print brings up a split-second dos screen, but not enough time to
> > recognize any text.
> > When I click on My Computer, all I see for that port is Mobile Device. It
> > doesn't recognize it correctly, apparently.
> > --
> > Clare
> >
> >
> > "Chris De Herrera" wrote:
> >
> >> Hi,
> >> Are you able to see the network connection while the Axim is connected?
> >> This can be checked by using a command line and issue the command ROUTE
> >> PRINT.
> >>
> >>
> >> --
> >> Chris De Herrera
> >> http://www.pocketpcfaq.com
> >> http://www.tabletpctalk.com
> >> http://www.pocketpctalk.com
> >> http://www.mobilitytalk.com
> >>
> >> Windows Mobile Device Center FAQs -
> >> http://www.pocketpcfaq.com/faqs/wmdc/index.htm
> >> ActiveSync Troubleshooting Guide -
> >> http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
> >>
> >> "Pastor Clare" <> wrote in message
> >> news:B43FDA98-7EDC-4E01-BB9B-...
> >> >I use McAffee Security Center with the Personal Firewall running. The
> >> > settings indicate that all 4 of the Active Sync programs have full
> >> > access
> >> > to
> >> > the computer. I tried turning off the firewall, but that didn't solve
> >> > my
> >> > problem.
> >> > --
> >> > Clare
> >> >
> >> >
> >> > "Chris De Herrera" wrote:
> >> >
> >> >> Hi,
> >> >> Do you have a software firewall that could be preventing the
> >> >> connection?
> >> >>
> >> >>
> >> >> --
> >> >> Chris De Herrera
> >> >> http://www.pocketpcfaq.com
> >> >> http://www.tabletpctalk.com
> >> >> http://www.pocketpctalk.com
> >> >> http://www.mobilitytalk.com
> >> >>
> >> >> Windows Mobile Device Center FAQs -
> >> >> http://www.pocketpcfaq.com/faqs/wmdc/index.htm
> >> >> ActiveSync Troubleshooting Guide -
> >> >> http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
> >> >>
> >> >> "Pastor Clare" <> wrote in
> >> >> message
> >> >> news:04FEE182-0A11-4FEA-9B1D-...
> >> >> > Yes, I have tried soft reset. Active Sync 4.1 failed, so I
> >> >> > downloaded
> >> >> > 4.5,
> >> >> > but it doesn't work either.
> >> >> > --
> >> >> > Clare
> >> >> >
> >> >> >
> >> >> > "Raj Pillai" wrote:
> >> >> >
> >> >> >> Hi Clare,
> >> >> >>
> >> >> >> Have you tried synchronizing after performing a soft reset? Also
> >> >> >> which
> >> >> >> version of ActiveSync are you using?
> >> >> >>
> >> >> >> --
> >> >> >> Regards,
> >> >> >> Raj Pillai
> >> >> >> Microsoft MVP - Mobile Devices
> >> >> >> http://www.pocketpcfaq.com/raj
> >> >> >>
> >> >> >>
> >> >> >> "Pastor Clare" <> wrote in
> >> >> >> message
> >> >> >> news:FB09EA06-B557-4A8C-AD6B-...
> >> >> >> > Microsoft Active Sync has been working very well connecting my
> >> >> >> > Axim
> >> >> >> > X51
> >> >> >> > until
> >> >> >> > recently. Now I get a message "connecting", then no progress;
> >> >> >> > finally,
> >> >> >> > "no
> >> >> >> > partnership established." Active Sync troubleshooter does not
> >> >> >> > help.
> >> >> >> > I
> >> >> >> > have
> >> >> >> > also checked my firewall, it indicates that all active sync
> >> >> >> > programs
> >> >> >> > have
> >> >> >> > full access. I first encountered this problem on my home desktop
> >> >> >> > (months
> >> >> >> > ago), but no problem at the office. Now the Axim won't connect
> >> >> >> > with
> >> >> >> > either
> >> >> >> > one.
> >> >> >> > --
> >> >> >> > Clare
> >> >> >>
> >> >> >>
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>

This is the result of the route print:
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.100 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
169.254.2.0 255.255.255.0 169.254.2.2 169.254.2.2 30
169.254.2.2 255.255.255.255 127.0.0.1 127.0.0.1 30
169.254.255.255 255.255.255.255 169.254.2.2 169.254.2.2 30
192.168.1.0 255.255.255.0 192.168.1.100 192.168.1.100 20
192.168.1.100 255.255.255.255 127.0.0.1 127.0.0.1 20
192.168.1.255 255.255.255.255 192.168.1.100 192.168.1.100 20
224.0.0.0 240.0.0.0 169.254.2.2 169.254.2.2 30
224.0.0.0 240.0.0.0 102.168.1.100 102.168.1.100 20
255.255.255.255 255.255.255.255 169.254.2.2 169.254.2.2 1
255.255.255.255 255.255.255.255 192.168.1.100 192.168.1.100 1

--
Clare


"Chris De Herrera" wrote:

> Hi,
> Are you able to see the network connection while the Axim is connected?
> This can be checked by using a command line and issue the command ROUTE
> PRINT.
>
>
> --
> Chris De Herrera
> http://www.pocketpcfaq.com
> http://www.tabletpctalk.com
> http://www.pocketpctalk.com
> http://www.mobilitytalk.com
>
> Windows Mobile Device Center FAQs -
> http://www.pocketpcfaq.com/faqs/wmdc/index.htm
> ActiveSync Troubleshooting Guide -
> http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
>
> "Pastor Clare" <> wrote in message
> news:B43FDA98-7EDC-4E01-BB9B-...
> >I use McAffee Security Center with the Personal Firewall running. The
> > settings indicate that all 4 of the Active Sync programs have full access
> > to
> > the computer. I tried turning off the firewall, but that didn't solve my
> > problem.
> > --
> > Clare
> >
> >
> > "Chris De Herrera" wrote:
> >
> >> Hi,
> >> Do you have a software firewall that could be preventing the connection?
> >>
> >>
> >> --
> >> Chris De Herrera
> >> http://www.pocketpcfaq.com
> >> http://www.tabletpctalk.com
> >> http://www.pocketpctalk.com
> >> http://www.mobilitytalk.com
> >>
> >> Windows Mobile Device Center FAQs -
> >> http://www.pocketpcfaq.com/faqs/wmdc/index.htm
> >> ActiveSync Troubleshooting Guide -
> >> http://www.pocketpcfaq.com/faqs/t-shootactivesync.htm
> >>
> >> "Pastor Clare" <> wrote in message
> >> news:04FEE182-0A11-4FEA-9B1D-...
> >> > Yes, I have tried soft reset. Active Sync 4.1 failed, so I downloaded
> >> > 4.5,
> >> > but it doesn't work either.
> >> > --
> >> > Clare
> >> >
> >> >
> >> > "Raj Pillai" wrote:
> >> >
> >> >> Hi Clare,
> >> >>
> >> >> Have you tried synchronizing after performing a soft reset? Also
> >> >> which
> >> >> version of ActiveSync are you using?
> >> >>
> >> >> --
> >> >> Regards,
> >> >> Raj Pillai
> >> >> Microsoft MVP - Mobile Devices
> >> >> http://www.pocketpcfaq.com/raj
> >> >>
> >> >>
> >> >> "Pastor Clare" <> wrote in
> >> >> message
> >> >> news:FB09EA06-B557-4A8C-AD6B-...
> >> >> > Microsoft Active Sync has been working very well connecting my Axim
> >> >> > X51
> >> >> > until
> >> >> > recently. Now I get a message "connecting", then no progress;
> >> >> > finally,
> >> >> > "no
> >> >> > partnership established." Active Sync troubleshooter does not help.
> >> >> > I
> >> >> > have
> >> >> > also checked my firewall, it indicates that all active sync programs
> >> >> > have
> >> >> > full access. I first encountered this problem on my home desktop
> >> >> > (months
> >> >> > ago), but no problem at the office. Now the Axim won't connect with
> >> >> > either
> >> >> > one.
> >> >> > --
> >> >> > Clare
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>