Backup to CD-RW not allowed in Vista RC1?

I attempted to do a full system backup for the first time with Vista's
built-in Backup and Recovery Wizard. Upon starting, the wizard correctly
found my backup device (a Lite-On combo DVD-ROM/CD-RW drive at E but
insisted that I back up to DVDs--which this drive cannot write! When I
attempted to use a CD-RW anyway, the wizard refused to continue, citing "too
little space on selected disc".

Also, I can't find the "Change settings" link in the Backup and Recovery
Wizard; what I see is "Change system protection settings", which AFAIK has
nothing to do with backups as such.

My only other backup alternative is the usual: use Retrospect Client (in
Windows 2000--it won't work in Vista yet; I've tried) to back up, via home
network, to my Mac's DVD-RW drive. The problem with this is that, in order to
do a full restore (e.g., when reformatting a hard drive to lock out bad
sectors), one must physically remove the hard drive and connect it directly
to the Mac, then reinstall it in the PC after restoring. Grrrrrr.....

You are trying to "back up" approximately 2-3 gigs on CDs?

alexander750" <> wrote in message
news:7B3DDC5D-E23C-4FB0-9F29-...
>I attempted to do a full system backup for the first time with Vista's
> built-in Backup and Recovery Wizard. Upon starting, the wizard correctly
> found my backup device (a Lite-On combo DVD-ROM/CD-RW drive at E but
> insisted that I back up to DVDs--which this drive cannot write! When I
> attempted to use a CD-RW anyway, the wizard refused to continue, citing
> "too
> little space on selected disc".
>
> Also, I can't find the "Change settings" link in the Backup and Recovery
> Wizard; what I see is "Change system protection settings", which AFAIK has
> nothing to do with backups as such.
>
> My only other backup alternative is the usual: use Retrospect Client (in
> Windows 2000--it won't work in Vista yet; I've tried) to back up, via home
> network, to my Mac's DVD-RW drive. The problem with this is that, in order
> to
> do a full restore (e.g., when reformatting a hard drive to lock out bad
> sectors), one must physically remove the hard drive and connect it
> directly
> to the Mac, then reinstall it in the PC after restoring. Grrrrrr.....

"AJR" wrote:

> You are trying to "back up" approximately 2-3 gigs on CDs?

Yes I am. I have plenty of 12X CD-RW discs around (enough to hold about
12-15 GB, depending on compression), since I don't need them for my Mac
anymore. And, as I've stated previously, the host PC's Combo Drive only
writes CDs, not DVDs.

Does the Backup and Restore Wizard not allow backups to span multiple media?
If that's the case, I'd recommend Microsoft fix this in the release version!

Alexander750 - The "Windows Complete PC Backup and Restore" utility included
with Vista does permit backup to multiple CDs and DVDs (at least RC2).
However the utility is not included with the Home or Premium versions of
Vista.

"alexander750" <> wrote in message
news:386CBC21-A86E-46FF-B407-...
>
>
> "AJR" wrote:
>
>> You are trying to "back up" approximately 2-3 gigs on CDs?
>
> Yes I am. I have plenty of 12X CD-RW discs around (enough to hold about
> 12-15 GB, depending on compression), since I don't need them for my Mac
> anymore. And, as I've stated previously, the host PC's Combo Drive only
> writes CDs, not DVDs.
>
> Does the Backup and Restore Wizard not allow backups to span multiple
> media?
> If that's the case, I'd recommend Microsoft fix this in the release
> version!

Hi alexander750,

Here's a registry key that will enable you to do your backup to CD. It's an
unsupported, undocumented workaround (use at your own risk). However, this
should enable you to use your CDs as media.


Under
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\Backup\Client

add
AllowCDMedia

of type REG_DWORD and set it to 1.

The "Change settings" link you refer to is (I believe) related to the File
Backup application. Once you perform your first backup, this link will
appear in the Backup and Restore Center.


--
This posting is provided "AS IS" with no warranties, and confers no rights.

Want to learn more about Windows Server file and storage technologies? Visit
our team blog at http://blogs.technet.com/filecab/default.aspx.



"alexander750" <> wrote in message
news:7B3DDC5D-E23C-4FB0-9F29-...
>I attempted to do a full system backup for the first time with Vista's
> built-in Backup and Recovery Wizard. Upon starting, the wizard correctly
> found my backup device (a Lite-On combo DVD-ROM/CD-RW drive at E but
> insisted that I back up to DVDs--which this drive cannot write! When I
> attempted to use a CD-RW anyway, the wizard refused to continue, citing
> "too
> little space on selected disc".
>
> Also, I can't find the "Change settings" link in the Backup and Recovery
> Wizard; what I see is "Change system protection settings", which AFAIK has
> nothing to do with backups as such.
>
> My only other backup alternative is the usual: use Retrospect Client (in
> Windows 2000--it won't work in Vista yet; I've tried) to back up, via home
> network, to my Mac's DVD-RW drive. The problem with this is that, in order
> to
> do a full restore (e.g., when reformatting a hard drive to lock out bad
> sectors), one must physically remove the hard drive and connect it
> directly
> to the Mac, then reinstall it in the PC after restoring. Grrrrrr.....

Oh Jill,
That'de be great for me too!
Can ya clarify the steps for a noob like me?
I know how to get to the reg key;
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\,
but from there;I don't see \Backup\Client???

Hmmm?
Any help?

That would be GREAT to be able to have cd backup!!!!

Jeff

"Jill Zoeller [MSFT]" <> wrote in message
news:Oiq%...
> Hi alexander750,
>
> Here's a registry key that will enable you to do your backup to CD. It's
> an unsupported, undocumented workaround (use at your own risk). However,
> this should enable you to use your CDs as media.
>
>
> Under
> HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\Backup\Client
>
> add
> AllowCDMedia
>
> of type REG_DWORD and set it to 1.
>
> The "Change settings" link you refer to is (I believe) related to the File
> Backup application. Once you perform your first backup, this link will
> appear in the Backup and Restore Center.
>
>
> --
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> Want to learn more about Windows Server file and storage technologies?
> Visit our team blog at http://blogs.technet.com/filecab/default.aspx.
>
>
>
> "alexander750" <> wrote in message
> news:7B3DDC5D-E23C-4FB0-9F29-...
>>I attempted to do a full system backup for the first time with Vista's
>> built-in Backup and Recovery Wizard. Upon starting, the wizard correctly
>> found my backup device (a Lite-On combo DVD-ROM/CD-RW drive at E but
>> insisted that I back up to DVDs--which this drive cannot write! When I
>> attempted to use a CD-RW anyway, the wizard refused to continue, citing
>> "too
>> little space on selected disc".
>>
>> Also, I can't find the "Change settings" link in the Backup and Recovery
>> Wizard; what I see is "Change system protection settings", which AFAIK
>> has
>> nothing to do with backups as such.
>>
>> My only other backup alternative is the usual: use Retrospect Client (in
>> Windows 2000--it won't work in Vista yet; I've tried) to back up, via
>> home
>> network, to my Mac's DVD-RW drive. The problem with this is that, in
>> order to
>> do a full restore (e.g., when reformatting a hard drive to lock out bad
>> sectors), one must physically remove the hard drive and connect it
>> directly
>> to the Mac, then reinstall it in the PC after restoring. Grrrrrr.....
>
>

Looks like you'll need to actually add a key named Backup and then a subkey
called Client yourself. This is easy--just right-click Windows and then
click New =>Key to create Backup. Then do the same by right-clicking Backup
and then creating a new key called Client. Then, right-click Client, point
to New, and then click DWORD. Here you can type AllowCDMedia. Then,
right-click this and then click Modify. In Value data, type 1.

After you've done this, you *might* want to reboot. This might not be
necessary, but as part of my testing this I rebooted and so I'm not sure if
it works without rebooting (no harm trying though). When you run Complete PC
Backup, you'll be prompted to insert a disk bigger than 1 GB. Just insert
your CD. It'll be formatted, and then the Complete PC Backup will begin.
It'll do some things behind the scenes (just watch the green bar) and
eventually you'll be prompted for another CD. I expect this could take long
time given the number of CDs you need. I'm going to cancel out of it now
because I don't have enough CDs to finish this.

Good luck!


--
This posting is provided "AS IS" with no warranties, and confers no rights.

Want to learn more about Windows Server file and storage technologies? Visit
our team blog at http://blogs.technet.com/filecab/default.aspx.


"Jeff" <> wrote in message
news:...
> Oh Jill,
> That'de be great for me too!
> Can ya clarify the steps for a noob like me?
> I know how to get to the reg key;
> HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\,
> but from there;I don't see \Backup\Client???
>
> Hmmm?
> Any help?
>
> That would be GREAT to be able to have cd backup!!!!
>
> Jeff
>
> "Jill Zoeller [MSFT]" <> wrote in message
> news:Oiq%...
>> Hi alexander750,
>>
>> Here's a registry key that will enable you to do your backup to CD. It's
>> an unsupported, undocumented workaround (use at your own risk). However,
>> this should enable you to use your CDs as media.
>>
>>
>> Under
>> HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\Backup\Client
>>
>> add
>> AllowCDMedia
>>
>> of type REG_DWORD and set it to 1.
>>
>> The "Change settings" link you refer to is (I believe) related to the
>> File Backup application. Once you perform your first backup, this link
>> will appear in the Backup and Restore Center.
>>
>>
>> --
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>> Want to learn more about Windows Server file and storage technologies?
>> Visit our team blog at http://blogs.technet.com/filecab/default.aspx.
>>
>>
>>
>> "alexander750" <> wrote in message
>> news:7B3DDC5D-E23C-4FB0-9F29-...
>>>I attempted to do a full system backup for the first time with Vista's
>>> built-in Backup and Recovery Wizard. Upon starting, the wizard correctly
>>> found my backup device (a Lite-On combo DVD-ROM/CD-RW drive at E but
>>> insisted that I back up to DVDs--which this drive cannot write! When I
>>> attempted to use a CD-RW anyway, the wizard refused to continue, citing
>>> "too
>>> little space on selected disc".
>>>
>>> Also, I can't find the "Change settings" link in the Backup and Recovery
>>> Wizard; what I see is "Change system protection settings", which AFAIK
>>> has
>>> nothing to do with backups as such.
>>>
>>> My only other backup alternative is the usual: use Retrospect Client (in
>>> Windows 2000--it won't work in Vista yet; I've tried) to back up, via
>>> home
>>> network, to my Mac's DVD-RW drive. The problem with this is that, in
>>> order to
>>> do a full restore (e.g., when reformatting a hard drive to lock out bad
>>> sectors), one must physically remove the hard drive and connect it
>>> directly
>>> to the Mac, then reinstall it in the PC after restoring. Grrrrrr.....
>>
>>
>

Jill,
Having reinstalled; is it because I have'nt run a backup yet;that the
keys not there?
Thanks for the instructions though!!! :-)

Jeff

"Jill Zoeller [MSFT]" <> wrote in message
news:eemn8$...
> Looks like you'll need to actually add a key named Backup and then a
> subkey called Client yourself. This is easy--just right-click Windows and
> then click New =>Key to create Backup. Then do the same by right-clicking
> Backup and then creating a new key called Client. Then, right-click
> Client, point to New, and then click DWORD. Here you can type
> AllowCDMedia. Then, right-click this and then click Modify. In Value data,
> type 1.
>
> After you've done this, you *might* want to reboot. This might not be
> necessary, but as part of my testing this I rebooted and so I'm not sure
> if it works without rebooting (no harm trying though). When you run
> Complete PC Backup, you'll be prompted to insert a disk bigger than 1 GB.
> Just insert your CD. It'll be formatted, and then the Complete PC Backup
> will begin. It'll do some things behind the scenes (just watch the green
> bar) and eventually you'll be prompted for another CD. I expect this could
> take long time given the number of CDs you need. I'm going to cancel out
> of it now because I don't have enough CDs to finish this.
>
> Good luck!
>
>
> --
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> Want to learn more about Windows Server file and storage technologies?
> Visit our team blog at http://blogs.technet.com/filecab/default.aspx.
>
>
> "Jeff" <> wrote in message
> news:...
>> Oh Jill,
>> That'de be great for me too!
>> Can ya clarify the steps for a noob like me?
>> I know how to get to the reg key;
>> HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\,
>> but from there;I don't see \Backup\Client???
>>
>> Hmmm?
>> Any help?
>>
>> That would be GREAT to be able to have cd backup!!!!
>>
>> Jeff
>>
>> "Jill Zoeller [MSFT]" <> wrote in message
>> news:Oiq%...
>>> Hi alexander750,
>>>
>>> Here's a registry key that will enable you to do your backup to CD. It's
>>> an unsupported, undocumented workaround (use at your own risk). However,
>>> this should enable you to use your CDs as media.
>>>
>>>
>>> Under
>>> HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\Backup\Client
>>>
>>> add
>>> AllowCDMedia
>>>
>>> of type REG_DWORD and set it to 1.
>>>
>>> The "Change settings" link you refer to is (I believe) related to the
>>> File Backup application. Once you perform your first backup, this link
>>> will appear in the Backup and Restore Center.
>>>
>>>
>>> --
>>> This posting is provided "AS IS" with no warranties, and confers no
>>> rights.
>>>
>>> Want to learn more about Windows Server file and storage technologies?
>>> Visit our team blog at http://blogs.technet.com/filecab/default.aspx.
>>>
>>>
>>>
>>> "alexander750" <> wrote in message
>>> news:7B3DDC5D-E23C-4FB0-9F29-...
>>>>I attempted to do a full system backup for the first time with Vista's
>>>> built-in Backup and Recovery Wizard. Upon starting, the wizard
>>>> correctly
>>>> found my backup device (a Lite-On combo DVD-ROM/CD-RW drive at E but
>>>> insisted that I back up to DVDs--which this drive cannot write! When I
>>>> attempted to use a CD-RW anyway, the wizard refused to continue, citing
>>>> "too
>>>> little space on selected disc".
>>>>
>>>> Also, I can't find the "Change settings" link in the Backup and
>>>> Recovery
>>>> Wizard; what I see is "Change system protection settings", which AFAIK
>>>> has
>>>> nothing to do with backups as such.
>>>>
>>>> My only other backup alternative is the usual: use Retrospect Client
>>>> (in
>>>> Windows 2000--it won't work in Vista yet; I've tried) to back up, via
>>>> home
>>>> network, to my Mac's DVD-RW drive. The problem with this is that, in
>>>> order to
>>>> do a full restore (e.g., when reformatting a hard drive to lock out bad
>>>> sectors), one must physically remove the hard drive and connect it
>>>> directly
>>>> to the Mac, then reinstall it in the PC after restoring. Grrrrrr.....
>>>
>>>
>>
>
>

I'm not sure...mine is a fairly new installation as well. But, it's not at
all unusual to have to add keys to enable certain behaviors.

--
This posting is provided "AS IS" with no warranties, and confers no rights.

Want to learn more about Windows Server file and storage technologies? Visit
our team blog at http://blogs.technet.com/filecab/default.aspx.


"Jeff" <> wrote in message
news:%...
> Jill,
> Having reinstalled; is it because I have'nt run a backup yet;that the
> keys not there?
> Thanks for the instructions though!!! :-)
>
> Jeff
>
> "Jill Zoeller [MSFT]" <> wrote in message
> news:eemn8$...
>> Looks like you'll need to actually add a key named Backup and then a
>> subkey called Client yourself. This is easy--just right-click Windows and
>> then click New =>Key to create Backup. Then do the same by right-clicking
>> Backup and then creating a new key called Client. Then, right-click
>> Client, point to New, and then click DWORD. Here you can type
>> AllowCDMedia. Then, right-click this and then click Modify. In Value
>> data, type 1.
>>
>> After you've done this, you *might* want to reboot. This might not be
>> necessary, but as part of my testing this I rebooted and so I'm not sure
>> if it works without rebooting (no harm trying though). When you run
>> Complete PC Backup, you'll be prompted to insert a disk bigger than 1 GB.
>> Just insert your CD. It'll be formatted, and then the Complete PC Backup
>> will begin. It'll do some things behind the scenes (just watch the green
>> bar) and eventually you'll be prompted for another CD. I expect this
>> could take long time given the number of CDs you need. I'm going to
>> cancel out of it now because I don't have enough CDs to finish this.
>>
>> Good luck!
>>
>>
>> --
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>> Want to learn more about Windows Server file and storage technologies?
>> Visit our team blog at http://blogs.technet.com/filecab/default.aspx.
>>
>>
>> "Jeff" <> wrote in message
>> news:...
>>> Oh Jill,
>>> That'de be great for me too!
>>> Can ya clarify the steps for a noob like me?
>>> I know how to get to the reg key;
>>> HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\,
>>> but from there;I don't see \Backup\Client???
>>>
>>> Hmmm?
>>> Any help?
>>>
>>> That would be GREAT to be able to have cd backup!!!!
>>>
>>> Jeff
>>>
>>> "Jill Zoeller [MSFT]" <> wrote in message
>>> news:Oiq%...
>>>> Hi alexander750,
>>>>
>>>> Here's a registry key that will enable you to do your backup to CD.
>>>> It's an unsupported, undocumented workaround (use at your own risk).
>>>> However, this should enable you to use your CDs as media.
>>>>
>>>>
>>>> Under
>>>> HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\Backup\Client
>>>>
>>>> add
>>>> AllowCDMedia
>>>>
>>>> of type REG_DWORD and set it to 1.
>>>>
>>>> The "Change settings" link you refer to is (I believe) related to the
>>>> File Backup application. Once you perform your first backup, this link
>>>> will appear in the Backup and Restore Center.
>>>>
>>>>
>>>> --
>>>> This posting is provided "AS IS" with no warranties, and confers no
>>>> rights.
>>>>
>>>> Want to learn more about Windows Server file and storage technologies?
>>>> Visit our team blog at http://blogs.technet.com/filecab/default.aspx.
>>>>
>>>>
>>>>
>>>> "alexander750" <> wrote in
>>>> message news:7B3DDC5D-E23C-4FB0-9F29-...
>>>>>I attempted to do a full system backup for the first time with Vista's
>>>>> built-in Backup and Recovery Wizard. Upon starting, the wizard
>>>>> correctly
>>>>> found my backup device (a Lite-On combo DVD-ROM/CD-RW drive at E but
>>>>> insisted that I back up to DVDs--which this drive cannot write! When I
>>>>> attempted to use a CD-RW anyway, the wizard refused to continue,
>>>>> citing "too
>>>>> little space on selected disc".
>>>>>
>>>>> Also, I can't find the "Change settings" link in the Backup and
>>>>> Recovery
>>>>> Wizard; what I see is "Change system protection settings", which AFAIK
>>>>> has
>>>>> nothing to do with backups as such.
>>>>>
>>>>> My only other backup alternative is the usual: use Retrospect Client
>>>>> (in
>>>>> Windows 2000--it won't work in Vista yet; I've tried) to back up, via
>>>>> home
>>>>> network, to my Mac's DVD-RW drive. The problem with this is that, in
>>>>> order to
>>>>> do a full restore (e.g., when reformatting a hard drive to lock out
>>>>> bad
>>>>> sectors), one must physically remove the hard drive and connect it
>>>>> directly
>>>>> to the Mac, then reinstall it in the PC after restoring. Grrrrrr.....
>>>>
>>>>
>>>
>>
>>
>

Jill,
Great,
Works great; not that I'm neccesarily going to use cd's all the time but;
but nice to know I can now;if I want.

Setup just perfect; YEAY!!!!!

Jeff

"Jill Zoeller [MSFT]" <> wrote in message
news:%...
> I'm not sure...mine is a fairly new installation as well. But, it's not at
> all unusual to have to add keys to enable certain behaviors.
>
> --
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> Want to learn more about Windows Server file and storage technologies?
> Visit our team blog at http://blogs.technet.com/filecab/default.aspx.
>
>
> "Jeff" <> wrote in message
> news:%...
>> Jill,
>> Having reinstalled; is it because I have'nt run a backup yet;that the
>> keys not there?
>> Thanks for the instructions though!!! :-)
>>
>> Jeff
>>
>> "Jill Zoeller [MSFT]" <> wrote in message
>> news:eemn8$...
>>> Looks like you'll need to actually add a key named Backup and then a
>>> subkey called Client yourself. This is easy--just right-click Windows
>>> and then click New =>Key to create Backup. Then do the same by
>>> right-clicking Backup and then creating a new key called Client. Then,
>>> right-click Client, point to New, and then click DWORD. Here you can
>>> type AllowCDMedia. Then, right-click this and then click Modify. In
>>> Value data, type 1.
>>>
>>> After you've done this, you *might* want to reboot. This might not be
>>> necessary, but as part of my testing this I rebooted and so I'm not sure
>>> if it works without rebooting (no harm trying though). When you run
>>> Complete PC Backup, you'll be prompted to insert a disk bigger than 1
>>> GB. Just insert your CD. It'll be formatted, and then the Complete PC
>>> Backup will begin. It'll do some things behind the scenes (just watch
>>> the green bar) and eventually you'll be prompted for another CD. I
>>> expect this could take long time given the number of CDs you need. I'm
>>> going to cancel out of it now because I don't have enough CDs to finish
>>> this.
>>>
>>> Good luck!
>>>
>>>
>>> --
>>> This posting is provided "AS IS" with no warranties, and confers no
>>> rights.
>>>
>>> Want to learn more about Windows Server file and storage technologies?
>>> Visit our team blog at http://blogs.technet.com/filecab/default.aspx.
>>>
>>>
>>> "Jeff" <> wrote in message
>>> news:...
>>>> Oh Jill,
>>>> That'de be great for me too!
>>>> Can ya clarify the steps for a noob like me?
>>>> I know how to get to the reg key;
>>>> HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\,
>>>> but from there;I don't see \Backup\Client???
>>>>
>>>> Hmmm?
>>>> Any help?
>>>>
>>>> That would be GREAT to be able to have cd backup!!!!
>>>>
>>>> Jeff
>>>>
>>>> "Jill Zoeller [MSFT]" <> wrote in message
>>>> news:Oiq%...
>>>>> Hi alexander750,
>>>>>
>>>>> Here's a registry key that will enable you to do your backup to CD.
>>>>> It's an unsupported, undocumented workaround (use at your own risk).
>>>>> However, this should enable you to use your CDs as media.
>>>>>
>>>>>
>>>>> Under
>>>>>
>>>>> HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\Backup\Client
>>>>>
>>>>> add
>>>>> AllowCDMedia
>>>>>
>>>>> of type REG_DWORD and set it to 1.
>>>>>
>>>>> The "Change settings" link you refer to is (I believe) related to the
>>>>> File Backup application. Once you perform your first backup, this link
>>>>> will appear in the Backup and Restore Center.
>>>>>
>>>>>
>>>>> --
>>>>> This posting is provided "AS IS" with no warranties, and confers no
>>>>> rights.
>>>>>
>>>>> Want to learn more about Windows Server file and storage technologies?
>>>>> Visit our team blog at http://blogs.technet.com/filecab/default.aspx.
>>>>>
>>>>>
>>>>>
>>>>> "alexander750" <> wrote in
>>>>> message news:7B3DDC5D-E23C-4FB0-9F29-...
>>>>>>I attempted to do a full system backup for the first time with Vista's
>>>>>> built-in Backup and Recovery Wizard. Upon starting, the wizard
>>>>>> correctly
>>>>>> found my backup device (a Lite-On combo DVD-ROM/CD-RW drive at E
>>>>>> but
>>>>>> insisted that I back up to DVDs--which this drive cannot write! When
>>>>>> I
>>>>>> attempted to use a CD-RW anyway, the wizard refused to continue,
>>>>>> citing "too
>>>>>> little space on selected disc".
>>>>>>
>>>>>> Also, I can't find the "Change settings" link in the Backup and
>>>>>> Recovery
>>>>>> Wizard; what I see is "Change system protection settings", which
>>>>>> AFAIK has
>>>>>> nothing to do with backups as such.
>>>>>>
>>>>>> My only other backup alternative is the usual: use Retrospect Client
>>>>>> (in
>>>>>> Windows 2000--it won't work in Vista yet; I've tried) to back up, via
>>>>>> home
>>>>>> network, to my Mac's DVD-RW drive. The problem with this is that, in
>>>>>> order to
>>>>>> do a full restore (e.g., when reformatting a hard drive to lock out
>>>>>> bad
>>>>>> sectors), one must physically remove the hard drive and connect it
>>>>>> directly
>>>>>> to the Mac, then reinstall it in the PC after restoring. Grrrrrr.....
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>