"tbrox" <> wrote in message
news

C220F06-7178-453A-96BD-...
> Yes I can boot into safe mode however I can never tell how long it will
take
> to get the BSOD. I did run memtest86 and at 26% I had over 150 errors.
>
> This is a new computer running 4GB Kingston PC8500. I was thinking RAM
but
> I'm not sure If I have all the MB ram settings correct and if the RAM for
> sure is the problem.
>
Then you *defiantly* have a RAM problem.
memtest should be able to run for hours without so much as a single error!!!
Check your mobo manual carefully and check the settings in the bios.
If you are not sure...then *underclock* the RAM.
As a matter of fact...set the ram to some minimal setting and run memtest
again.
If there are any errors at all the RAM is probably defective...so you should
check it stick by stick.
If the errors stop entirely, you may clock the ram up higher...
but if it has errors when running at it's specified rating...then the RAM is
prob. defective
BTW: When running memtest...once even *one* error is found...no sense in
letting it run any further