Can't install Activesync 4.x

I have a problem installing Activesync 4.x on my PC (Windows XP Pro
SP2 with all the latest updates installed).

When the installation starts, it goes through the initial phase
configuring the installer, but then it just pops up a dialog box
saying:

>Setup not complete.
>
>The wizard was interrupted before Microsoft ActiveSync 4.1
>could be completely installed
>
>You system has not been modified. To complete installation
>at another time, please run setup again.

I have tried to install from several different admin users, including
the local administrator. I've tried both the Activesync CD that was
supplied with my device (version 4.0 Norwegian) and version 4.1
downloaded from Microsoft (versions 4.1 English and Norwegian).

I've previously installed ActiveSync 3.7 on the PC, and have no
problems reinstalling and uninstalling it even now. I've also checked
the registry and confirmed that there are no traces left of the 3.7
installation when installing 4.x.

Any suggestions?

Anders

Hi Anders,



Can you send me the %temp%\activesync.log & %windir%\setupapi.log files you
get immediately after the failed install attempt?



Also, do you have any antivirus or anti-spamware programs running?



Thanks!



-Leah



"This posting is provided "AS IS" with no warranties, and confers no
rights."




"Anders Herbjørnsen" <> wrote in message
news:...
>I have a problem installing Activesync 4.x on my PC (Windows XP Pro
> SP2 with all the latest updates installed).
>
> When the installation starts, it goes through the initial phase
> configuring the installer, but then it just pops up a dialog box
> saying:
>
>>Setup not complete.
>>
>>The wizard was interrupted before Microsoft ActiveSync 4.1
>>could be completely installed
>>
>>You system has not been modified. To complete installation
>>at another time, please run setup again.
>
> I have tried to install from several different admin users, including
> the local administrator. I've tried both the Activesync CD that was
> supplied with my device (version 4.0 Norwegian) and version 4.1
> downloaded from Microsoft (versions 4.1 English and Norwegian).
>
> I've previously installed ActiveSync 3.7 on the PC, and have no
> problems reinstalling and uninstalling it even now. I've also checked
> the registry and confirmed that there are no traces left of the 3.7
> installation when installing 4.x.
>
> Any suggestions?
>
> Anders

Hi,

I have the same problem. Any news with the log files?

Cheers
Marc

Leah Papernick [MSFT] wrote:
> Hi Anders,
>
>
>
> Can you send me the %temp%\activesync.log & %windir%\setupapi.log files you
> get immediately after the failed install attempt?
>
>
>
> Also, do you have any antivirus or anti-spamware programs running?
>
>
>
> Thanks!
>
>
>
> -Leah
>
>
>
> "This posting is provided "AS IS" with no warranties, and confers no
> rights."
>
>
>
>
> "Anders Herbjørnsen" <> wrote in message
> news:...
>
>>I have a problem installing Activesync 4.x on my PC (Windows XP Pro
>>SP2 with all the latest updates installed).
>>
>>When the installation starts, it goes through the initial phase
>>configuring the installer, but then it just pops up a dialog box
>>saying:
>>
>>
>>>Setup not complete.
>>>
>>>The wizard was interrupted before Microsoft ActiveSync 4.1
>>>could be completely installed
>>>
>>>You system has not been modified. To complete installation
>>>at another time, please run setup again.
>>
>>I have tried to install from several different admin users, including
>>the local administrator. I've tried both the Activesync CD that was
>>supplied with my device (version 4.0 Norwegian) and version 4.1
>>downloaded from Microsoft (versions 4.1 English and Norwegian).
>>
>>I've previously installed ActiveSync 3.7 on the PC, and have no
>>problems reinstalling and uninstalling it even now. I've also checked
>>the registry and confirmed that there are no traces left of the 3.7
>>installation when installing 4.x.
>>
>>Any suggestions?
>>
>>Anders
>
>
>

Thanks for letting me know Marc. It does seem that multiple people are
running into this. We are still investigating. I'll keep you posted.

-Leah

"This posting is provided "AS IS" with no warranties, and confers no
rights."

"Marc Baur" <> wrote in message
news:dnkmd6$17uo$...
> Hi,
>
> I have the same problem. Any news with the log files?
>
> Cheers
> Marc
>
> Leah Papernick [MSFT] wrote:
>> Hi Anders,
>>
>>
>>
>> Can you send me the %temp%\activesync.log & %windir%\setupapi.log files
>> you get immediately after the failed install attempt?
>>
>>
>>
>> Also, do you have any antivirus or anti-spamware programs running?
>>
>>
>>
>> Thanks!
>>
>>
>>
>> -Leah
>>
>>
>>
>> "This posting is provided "AS IS" with no warranties, and confers no
>> rights."
>>
>>
>>
>>
>> "Anders Herbjørnsen" <> wrote in message
>> news:...
>>
>>>I have a problem installing Activesync 4.x on my PC (Windows XP Pro
>>>SP2 with all the latest updates installed).
>>>
>>>When the installation starts, it goes through the initial phase
>>>configuring the installer, but then it just pops up a dialog box
>>>saying:
>>>
>>>
>>>>Setup not complete.
>>>>
>>>>The wizard was interrupted before Microsoft ActiveSync 4.1
>>>>could be completely installed
>>>>
>>>>You system has not been modified. To complete installation
>>>>at another time, please run setup again.
>>>
>>>I have tried to install from several different admin users, including
>>>the local administrator. I've tried both the Activesync CD that was
>>>supplied with my device (version 4.0 Norwegian) and version 4.1
>>>downloaded from Microsoft (versions 4.1 English and Norwegian).
>>>
>>>I've previously installed ActiveSync 3.7 on the PC, and have no
>>>problems reinstalling and uninstalling it even now. I've also checked
>>>the registry and confirmed that there are no traces left of the 3.7
>>>installation when installing 4.x.
>>>
>>>Any suggestions?
>>>
>>>Anders
>>
>>

Thank for your answer. If you need my log file, let me know.

In my case, the installation stop in the CustomAction named
"CA_SET_LAUNCHONFINISH".
I've edited the msi file and disable this action in the CustomAction
Table. Then the installation process goes to the next step and stop at
the "CA_SET_INSTALLEDDIRNOSLASH" action. What I could see it that this 2
action use the NewBinary19 file.

Hope this help.

Cheers
Marc

Leah Papernick [MSFT] wrote:
> Thanks for letting me know Marc. It does seem that multiple people are
> running into this. We are still investigating. I'll keep you posted.
>
> -Leah
>
> "This posting is provided "AS IS" with no warranties, and confers no
> rights."
>
> "Marc Baur" <> wrote in message
> news:dnkmd6$17uo$...
>
>>Hi,
>>
>>I have the same problem. Any news with the log files?
>>
>>Cheers
>>Marc
>>
>>Leah Papernick [MSFT] wrote:
>>
>>>Hi Anders,
>>>
>>>
>>>
>>>Can you send me the %temp%\activesync.log & %windir%\setupapi.log files
>>>you get immediately after the failed install attempt?
>>>
>>>
>>>
>>>Also, do you have any antivirus or anti-spamware programs running?
>>>
>>>
>>>
>>>Thanks!
>>>
>>>
>>>
>>>-Leah
>>>
>>>
>>>
>>>"This posting is provided "AS IS" with no warranties, and confers no
>>> rights."
>>>
>>>
>>>
>>>
>>>"Anders Herbjørnsen" <> wrote in message
>>>news: ...
>>>
>>>
>>>>I have a problem installing Activesync 4.x on my PC (Windows XP Pro
>>>>SP2 with all the latest updates installed).
>>>>
>>>>When the installation starts, it goes through the initial phase
>>>>configuring the installer, but then it just pops up a dialog box
>>>>saying:
>>>>
>>>>
>>>>
>>>>>Setup not complete.
>>>>>
>>>>>The wizard was interrupted before Microsoft ActiveSync 4.1
>>>>>could be completely installed
>>>>>
>>>>>You system has not been modified. To complete installation
>>>>>at another time, please run setup again.
>>>>
>>>>I have tried to install from several different admin users, including
>>>>the local administrator. I've tried both the Activesync CD that was
>>>>supplied with my device (version 4.0 Norwegian) and version 4.1
>>>>downloaded from Microsoft (versions 4.1 English and Norwegian).
>>>>
>>>>I've previously installed ActiveSync 3.7 on the PC, and have no
>>>>problems reinstalling and uninstalling it even now. I've also checked
>>>>the registry and confirmed that there are no traces left of the 3.7
>>>>installation when installing 4.x.
>>>>
>>>>Any suggestions?
>>>>
>>>>Anders
>>>
>>>
>

Yes please. A log would be great. Can you please do the following:

Go to setup.exe (not the companion cd exe, but the one under the
Activesync/wwe directory). And at a command line, run:
setup.exe /v"/L*v \"c:\ASver.log""

You can send the log to (without the "online")

Thanks!

-Leah

"Marc Baur" <> wrote in message
news:dnnics$2elr$...
> Thank for your answer. If you need my log file, let me know.
>
> In my case, the installation stop in the CustomAction named
> "CA_SET_LAUNCHONFINISH".
> I've edited the msi file and disable this action in the CustomAction
> Table. Then the installation process goes to the next step and stop at the
> "CA_SET_INSTALLEDDIRNOSLASH" action. What I could see it that this 2
> action use the NewBinary19 file.
>
> Hope this help.
>
> Cheers
> Marc
>
> Leah Papernick [MSFT] wrote:
>> Thanks for letting me know Marc. It does seem that multiple people are
>> running into this. We are still investigating. I'll keep you posted.
>>
>> -Leah
>>
>> "This posting is provided "AS IS" with no warranties, and confers no
>> rights."
>>
>> "Marc Baur" <> wrote in message
>> news:dnkmd6$17uo$...
>>
>>>Hi,
>>>
>>>I have the same problem. Any news with the log files?
>>>
>>>Cheers
>>>Marc
>>>
>>>Leah Papernick [MSFT] wrote:
>>>
>>>>Hi Anders,
>>>>
>>>>
>>>>
>>>>Can you send me the %temp%\activesync.log & %windir%\setupapi.log files
>>>>you get immediately after the failed install attempt?
>>>>
>>>>
>>>>
>>>>Also, do you have any antivirus or anti-spamware programs running?
>>>>
>>>>
>>>>
>>>>Thanks!
>>>>
>>>>
>>>>
>>>>-Leah
>>>>
>>>>
>>>>
>>>>"This posting is provided "AS IS" with no warranties, and confers no
>>>> rights."
>>>>
>>>>
>>>>
>>>>
>>>>"Anders Herbjørnsen" <> wrote in message
>>>>news: m...
>>>>
>>>>
>>>>>I have a problem installing Activesync 4.x on my PC (Windows XP Pro
>>>>>SP2 with all the latest updates installed).
>>>>>
>>>>>When the installation starts, it goes through the initial phase
>>>>>configuring the installer, but then it just pops up a dialog box
>>>>>saying:
>>>>>
>>>>>
>>>>>
>>>>>>Setup not complete.
>>>>>>
>>>>>>The wizard was interrupted before Microsoft ActiveSync 4.1
>>>>>>could be completely installed
>>>>>>
>>>>>>You system has not been modified. To complete installation
>>>>>>at another time, please run setup again.
>>>>>
>>>>>I have tried to install from several different admin users, including
>>>>>the local administrator. I've tried both the Activesync CD that was
>>>>>supplied with my device (version 4.0 Norwegian) and version 4.1
>>>>>downloaded from Microsoft (versions 4.1 English and Norwegian).
>>>>>
>>>>>I've previously installed ActiveSync 3.7 on the PC, and have no
>>>>>problems reinstalling and uninstalling it even now. I've also checked
>>>>>the registry and confirmed that there are no traces left of the 3.7
>>>>>installation when installing 4.x.
>>>>>
>>>>>Any suggestions?
>>>>>
>>>>>Anders
>>>>
>>>>
>>

Hi,

I have the same problem regarding this issue with the german version of
ActiveSync 4.1.

Is there any new information regarding this issue?

Dirk


"Leah Papernick [MSFT]" wrote:

> Yes please. A log would be great. Can you please do the following:
>
> Go to setup.exe (not the companion cd exe, but the one under the
> Activesync/wwe directory). And at a command line, run:
> setup.exe /v"/L*v \"c:\ASver.log""
>
> You can send the log to (without the "online")
>
> Thanks!
>
> -Leah
>
> "Marc Baur" <> wrote in message
> news:dnnics$2elr$...
> > Thank for your answer. If you need my log file, let me know.
> >
> > In my case, the installation stop in the CustomAction named
> > "CA_SET_LAUNCHONFINISH".
> > I've edited the msi file and disable this action in the CustomAction
> > Table. Then the installation process goes to the next step and stop at the
> > "CA_SET_INSTALLEDDIRNOSLASH" action. What I could see it that this 2
> > action use the NewBinary19 file.
> >
> > Hope this help.
> >
> > Cheers
> > Marc
> >
> > Leah Papernick [MSFT] wrote:
> >> Thanks for letting me know Marc. It does seem that multiple people are
> >> running into this. We are still investigating. I'll keep you posted.
> >>
> >> -Leah
> >>
> >> "This posting is provided "AS IS" with no warranties, and confers no
> >> rights."
> >>
> >> "Marc Baur" <> wrote in message
> >> news:dnkmd6$17uo$...
> >>
> >>>Hi,
> >>>
> >>>I have the same problem. Any news with the log files?
> >>>
> >>>Cheers
> >>>Marc
> >>>
> >>>Leah Papernick [MSFT] wrote:
> >>>
> >>>>Hi Anders,
> >>>>
> >>>>
> >>>>
> >>>>Can you send me the %temp%\activesync.log & %windir%\setupapi.log files
> >>>>you get immediately after the failed install attempt?
> >>>>
> >>>>
> >>>>
> >>>>Also, do you have any antivirus or anti-spamware programs running?
> >>>>
> >>>>
> >>>>
> >>>>Thanks!
> >>>>
> >>>>
> >>>>
> >>>>-Leah
> >>>>
> >>>>
> >>>>
> >>>>"This posting is provided "AS IS" with no warranties, and confers no
> >>>> rights."
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>"Anders Herbjørnsen" <> wrote in message
> >>>>news: m...
> >>>>
> >>>>
> >>>>>I have a problem installing Activesync 4.x on my PC (Windows XP Pro
> >>>>>SP2 with all the latest updates installed).
> >>>>>
> >>>>>When the installation starts, it goes through the initial phase
> >>>>>configuring the installer, but then it just pops up a dialog box
> >>>>>saying:
> >>>>>
> >>>>>
> >>>>>
> >>>>>>Setup not complete.
> >>>>>>
> >>>>>>The wizard was interrupted before Microsoft ActiveSync 4.1
> >>>>>>could be completely installed
> >>>>>>
> >>>>>>You system has not been modified. To complete installation
> >>>>>>at another time, please run setup again.
> >>>>>
> >>>>>I have tried to install from several different admin users, including
> >>>>>the local administrator. I've tried both the Activesync CD that was
> >>>>>supplied with my device (version 4.0 Norwegian) and version 4.1
> >>>>>downloaded from Microsoft (versions 4.1 English and Norwegian).
> >>>>>
> >>>>>I've previously installed ActiveSync 3.7 on the PC, and have no
> >>>>>problems reinstalling and uninstalling it even now. I've also checked
> >>>>>the registry and confirmed that there are no traces left of the 3.7
> >>>>>installation when installing 4.x.
> >>>>>
> >>>>>Any suggestions?
> >>>>>
> >>>>>Anders
> >>>>
> >>>>
> >>
>
>
>

Hi Dirk,

currently I've no news from Leah and I've not found any solution.

Marc

Dirk Grunewald wrote:
> Hi,
>
> I have the same problem regarding this issue with the german version of
> ActiveSync 4.1.
>
> Is there any new information regarding this issue?
>
> Dirk
>
>
> "Leah Papernick [MSFT]" wrote:
>
>
>>Yes please. A log would be great. Can you please do the following:
>>
>>Go to setup.exe (not the companion cd exe, but the one under the
>>Activesync/wwe directory). And at a command line, run:
>>setup.exe /v"/L*v \"c:\ASver.log""
>>
>>You can send the log to (without the "online")
>>
>>Thanks!
>>
>>-Leah
>>
>>"Marc Baur" <> wrote in message
>>news:dnnics$2elr$...
>>
>>>Thank for your answer. If you need my log file, let me know.
>>>
>>>In my case, the installation stop in the CustomAction named
>>>"CA_SET_LAUNCHONFINISH".
>>>I've edited the msi file and disable this action in the CustomAction
>>>Table. Then the installation process goes to the next step and stop at the
>>>"CA_SET_INSTALLEDDIRNOSLASH" action. What I could see it that this 2
>>>action use the NewBinary19 file.
>>>
>>>Hope this help.
>>>
>>>Cheers
>>>Marc
>>>
>>>Leah Papernick [MSFT] wrote:
>>>
>>>>Thanks for letting me know Marc. It does seem that multiple people are
>>>>running into this. We are still investigating. I'll keep you posted.
>>>>
>>>> -Leah
>>>>
>>>> "This posting is provided "AS IS" with no warranties, and confers no
>>>>rights."
>>>>
>>>>"Marc Baur" <> wrote in message
>>>>news:dnkmd6$17uo$...
>>>>
>>>>
>>>>>Hi,
>>>>>
>>>>>I have the same problem. Any news with the log files?
>>>>>
>>>>>Cheers
>>>>>Marc
>>>>>
>>>>>Leah Papernick [MSFT] wrote:
>>>>>
>>>>>
>>>>>>Hi Anders,
>>>>>>
>>>>>>
>>>>>>
>>>>>>Can you send me the %temp%\activesync.log & %windir%\setupapi.log files
>>>>>>you get immediately after the failed install attempt?
>>>>>>
>>>>>>
>>>>>>
>>>>>>Also, do you have any antivirus or anti-spamware programs running?
>>>>>>
>>>>>>
>>>>>>
>>>>>>Thanks!
>>>>>>
>>>>>>
>>>>>>
>>>>>>-Leah
>>>>>>
>>>>>>
>>>>>>
>>>>>>"This posting is provided "AS IS" with no warranties, and confers no
>>>>>>rights."
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>"Anders Herbjørnsen" <> wrote in message
>>>>>>news:q62oo150ci1v3iu56nn268ab8bsj4fv6i7@4ax. com...
>>>>>>
>>>>>>
>>>>>>
>>>>>>>I have a problem installing Activesync 4.x on my PC (Windows XP Pro
>>>>>>>SP2 with all the latest updates installed).
>>>>>>>
>>>>>>>When the installation starts, it goes through the initial phase
>>>>>>>configuring the installer, but then it just pops up a dialog box
>>>>>>>saying:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>Setup not complete.
>>>>>>>>
>>>>>>>>The wizard was interrupted before Microsoft ActiveSync 4.1
>>>>>>>>could be completely installed
>>>>>>>>
>>>>>>>>You system has not been modified. To complete installation
>>>>>>>>at another time, please run setup again.
>>>>>>>
>>>>>>>I have tried to install from several different admin users, including
>>>>>>>the local administrator. I've tried both the Activesync CD that was
>>>>>>>supplied with my device (version 4.0 Norwegian) and version 4.1
>>>>>>>downloaded from Microsoft (versions 4.1 English and Norwegian).
>>>>>>>
>>>>>>>I've previously installed ActiveSync 3.7 on the PC, and have no
>>>>>>>problems reinstalling and uninstalling it even now. I've also checked
>>>>>>>the registry and confirmed that there are no traces left of the 3.7
>>>>>>>installation when installing 4.x.
>>>>>>>
>>>>>>>Any suggestions?
>>>>>>>
>>>>>>>Anders
>>>>>>
>>>>>>
>>
>>

Hi,

I still haven't a solution for the initial problem, but after installing
VisualStudio 2005 Professional and SQL Server 2005, I was able to install
ActiveSync 4.1

Dirk

"" wrote:

> Hi Dirk,
>
> currently I've no news from Leah and I've not found any solution.
>
> Marc
>
> Dirk Grunewald wrote:
> > Hi,
> >
> > I have the same problem regarding this issue with the german version of
> > ActiveSync 4.1.
> >
> > Is there any new information regarding this issue?
> >
> > Dirk
> >
> >
> > "Leah Papernick [MSFT]" wrote:
> >
> >
> >>Yes please. A log would be great. Can you please do the following:
> >>
> >>Go to setup.exe (not the companion cd exe, but the one under the
> >>Activesync/wwe directory). And at a command line, run:
> >>setup.exe /v"/L*v \"c:\ASver.log""
> >>
> >>You can send the log to (without the "online")
> >>
> >>Thanks!
> >>
> >>-Leah
> >>
> >>"Marc Baur" <> wrote in message
> >>news:dnnics$2elr$...
> >>
> >>>Thank for your answer. If you need my log file, let me know.
> >>>
> >>>In my case, the installation stop in the CustomAction named
> >>>"CA_SET_LAUNCHONFINISH".
> >>>I've edited the msi file and disable this action in the CustomAction
> >>>Table. Then the installation process goes to the next step and stop at the
> >>>"CA_SET_INSTALLEDDIRNOSLASH" action. What I could see it that this 2
> >>>action use the NewBinary19 file.
> >>>
> >>>Hope this help.
> >>>
> >>>Cheers
> >>>Marc
> >>>
> >>>Leah Papernick [MSFT] wrote:
> >>>
> >>>>Thanks for letting me know Marc. It does seem that multiple people are
> >>>>running into this. We are still investigating. I'll keep you posted.
> >>>>
> >>>> -Leah
> >>>>
> >>>> "This posting is provided "AS IS" with no warranties, and confers no
> >>>>rights."
> >>>>
> >>>>"Marc Baur" <> wrote in message
> >>>>news:dnkmd6$17uo$...
> >>>>
> >>>>
> >>>>>Hi,
> >>>>>
> >>>>>I have the same problem. Any news with the log files?
> >>>>>
> >>>>>Cheers
> >>>>>Marc
> >>>>>
> >>>>>Leah Papernick [MSFT] wrote:
> >>>>>
> >>>>>
> >>>>>>Hi Anders,
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>Can you send me the %temp%\activesync.log & %windir%\setupapi.log files
> >>>>>>you get immediately after the failed install attempt?
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>Also, do you have any antivirus or anti-spamware programs running?
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>Thanks!
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>-Leah
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>"This posting is provided "AS IS" with no warranties, and confers no
> >>>>>>rights."
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>"Anders Herbjørnsen" <> wrote in message
> >>>>>>news:q62oo150ci1v3iu56nn268ab8bsj4fv6i7@4ax. com...
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>I have a problem installing Activesync 4.x on my PC (Windows XP Pro
> >>>>>>>SP2 with all the latest updates installed).
> >>>>>>>
> >>>>>>>When the installation starts, it goes through the initial phase
> >>>>>>>configuring the installer, but then it just pops up a dialog box
> >>>>>>>saying:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>Setup not complete.
> >>>>>>>>
> >>>>>>>>The wizard was interrupted before Microsoft ActiveSync 4.1
> >>>>>>>>could be completely installed
> >>>>>>>>
> >>>>>>>>You system has not been modified. To complete installation
> >>>>>>>>at another time, please run setup again.
> >>>>>>>
> >>>>>>>I have tried to install from several different admin users, including
> >>>>>>>the local administrator. I've tried both the Activesync CD that was
> >>>>>>>supplied with my device (version 4.0 Norwegian) and version 4.1
> >>>>>>>downloaded from Microsoft (versions 4.1 English and Norwegian).
> >>>>>>>
> >>>>>>>I've previously installed ActiveSync 3.7 on the PC, and have no
> >>>>>>>problems reinstalling and uninstalling it even now. I've also checked
> >>>>>>>the registry and confirmed that there are no traces left of the 3.7
> >>>>>>>installation when installing 4.x.
> >>>>>>>
> >>>>>>>Any suggestions?
> >>>>>>>
> >>>>>>>Anders
> >>>>>>
> >>>>>>
> >>
> >>
>

Hi,

due to the complexity of the installation of Visual Studio and SQL Server
2005, I don't know, which file was responsible for my setup problems.
During the setup, the windows installer and the .Net framework were updated.

Dirk

"Anders Herbjxrnsen" wrote:

> I have a problem installing Activesync 4.x on my PC (Windows XP Pro
> SP2 with all the latest updates installed).
>
> When the installation starts, it goes through the initial phase
> configuring the installer, but then it just pops up a dialog box
> saying:
>
> >Setup not complete.
> >
> >The wizard was interrupted before Microsoft ActiveSync 4.1
> >could be completely installed
> >
> >You system has not been modified. To complete installation
> >at another time, please run setup again.
>
> I have tried to install from several different admin users, including
> the local administrator. I've tried both the Activesync CD that was
> supplied with my device (version 4.0 Norwegian) and version 4.1
> downloaded from Microsoft (versions 4.1 English and Norwegian).
>
> I've previously installed ActiveSync 3.7 on the PC, and have no
> problems reinstalling and uninstalling it even now. I've also checked
> the registry and confirmed that there are no traces left of the 3.7
> installation when installing 4.x.
>
> Any suggestions?
>
> Anders
>