Windows Vista Tips

Windows Vista Tips > Newsgroups > Windows Update > Computer Fails To Start After Update

Reply
Thread Tools Display Modes

Computer Fails To Start After Update

 
 
craig
Guest
Posts: n/a

 
      07-12-2007
I performed an automated upodate to install security patches etc, and an
NVidia network card update. After rebooting, windows failed to start and
times out and shuts down after the black screen with the loading bar. The
logo does not appear, just the bars. I was able to get a completely black
screen with a cursor at one point, but that was it. My vista disc is at home
(600 miles away) and i am out of state for the summer. Any help?
 
Reply With Quote
 
 
 
 
RClaeson
Guest
Posts: n/a

 
      07-13-2007
I have the same problem. I had MS Support on the phone for three hours. The
problem seems to be related to the Tuesday set of patches. Tech support said
to not install KB928365 and KB928366. I do not find either in the list of
patches. It would help me to find out which patches were released on Tuesday.

"craig" wrote:

> I performed an automated upodate to install security patches etc, and an
> NVidia network card update. After rebooting, windows failed to start and
> times out and shuts down after the black screen with the loading bar. The
> logo does not appear, just the bars. I was able to get a completely black
> screen with a cursor at one point, but that was it. My vista disc is at home
> (600 miles away) and i am out of state for the summer. Any help?

 
Reply With Quote
 
realcestmoi
Guest
Posts: n/a

 
      07-13-2007
Hi there,

Taking driver updates from windows updte is really a bad idea unless you
like problems.

Try usung system restore, boot last known good configuration or roll back on
the driver.

If a driver update is needed ( ONLY if the hardware is not working proper!)
you should take it from the manufacturers website.

Best regards,
Michel Denie

"craig" <> wrote in message
newsF0E1A93-33F1-4306-97B8-...
>I performed an automated upodate to install security patches etc, and an
> NVidia network card update. After rebooting, windows failed to start and
> times out and shuts down after the black screen with the loading bar. The
> logo does not appear, just the bars. I was able to get a completely black
> screen with a cursor at one point, but that was it. My vista disc is at
> home
> (600 miles away) and i am out of state for the summer. Any help?



 
Reply With Quote
 
craig
Guest
Posts: n/a

 
      07-13-2007
last known configuration doesn't work, just hangs on me. and can i do a
system restore without the vista disc? i haven't been able to figure out
otherwise.
the real problem is that i don't have my cd, and i'm not living in my home
state this summer. i'd hate to have to fly back to get a cd.

thanks for the advice. i'll remember to not trust the updates next time.

(posting from work)

"realcestmoi" wrote:

> Hi there,
>
> Taking driver updates from windows updte is really a bad idea unless you
> like problems.
>
> Try usung system restore, boot last known good configuration or roll back on
> the driver.
>
> If a driver update is needed ( ONLY if the hardware is not working proper!)
> you should take it from the manufacturers website.
>
> Best regards,
> Michel Denie
>
> "craig" <> wrote in message
> newsF0E1A93-33F1-4306-97B8-...
> >I performed an automated upodate to install security patches etc, and an
> > NVidia network card update. After rebooting, windows failed to start and
> > times out and shuts down after the black screen with the loading bar. The
> > logo does not appear, just the bars. I was able to get a completely black
> > screen with a cursor at one point, but that was it. My vista disc is at
> > home
> > (600 miles away) and i am out of state for the summer. Any help?

>
>
>

 
Reply With Quote
 
craig
Guest
Posts: n/a

 
      07-13-2007
were toy able to get back on your computer at all? i'm limited to posting
from work at this point.

"RClaeson" wrote:

> I have the same problem. I had MS Support on the phone for three hours. The
> problem seems to be related to the Tuesday set of patches. Tech support said
> to not install KB928365 and KB928366. I do not find either in the list of
> patches. It would help me to find out which patches were released on Tuesday.
>
> "craig" wrote:
>
> > I performed an automated upodate to install security patches etc, and an
> > NVidia network card update. After rebooting, windows failed to start and
> > times out and shuts down after the black screen with the loading bar. The
> > logo does not appear, just the bars. I was able to get a completely black
> > screen with a cursor at one point, but that was it. My vista disc is at home
> > (600 miles away) and i am out of state for the summer. Any help?

 
Reply With Quote
 
RClaeson
Guest
Posts: n/a

 
      07-13-2007
I have been through the revert to previous, repair, reinstall, format and
reinstall. My next tactic is to reinstall the patches one at at time until I
find the culprit. I have been unable to restart without a full quick format
and reinstall.

Robert

"craig" wrote:

> last known configuration doesn't work, just hangs on me. and can i do a
> system restore without the vista disc? i haven't been able to figure out
> otherwise.
> the real problem is that i don't have my cd, and i'm not living in my home
> state this summer. i'd hate to have to fly back to get a cd.
>
> thanks for the advice. i'll remember to not trust the updates next time.
>
> (posting from work)
>
> "realcestmoi" wrote:
>
> > Hi there,
> >
> > Taking driver updates from windows updte is really a bad idea unless you
> > like problems.
> >
> > Try usung system restore, boot last known good configuration or roll back on
> > the driver.
> >
> > If a driver update is needed ( ONLY if the hardware is not working proper!)
> > you should take it from the manufacturers website.
> >
> > Best regards,
> > Michel Denie
> >
> > "craig" <> wrote in message
> > newsF0E1A93-33F1-4306-97B8-...
> > >I performed an automated upodate to install security patches etc, and an
> > > NVidia network card update. After rebooting, windows failed to start and
> > > times out and shuts down after the black screen with the loading bar. The
> > > logo does not appear, just the bars. I was able to get a completely black
> > > screen with a cursor at one point, but that was it. My vista disc is at
> > > home
> > > (600 miles away) and i am out of state for the summer. Any help?

> >
> >
> >

 
Reply With Quote
 
bronorb
Guest
Posts: n/a

 
      07-13-2007
Before you reinstall XP read through this article:
http://webcast.broadcastnewsroom.com...le.jsp?id=8658

I followed the steps there and got my system back to the point right before
I lost it. It takes a while and only do it if you feel comfortable with the
procedures.
It assumes that you have the XP setup disk.

Good luck.


"RClaeson" wrote:

> I have been through the revert to previous, repair, reinstall, format and
> reinstall. My next tactic is to reinstall the patches one at at time until I
> find the culprit. I have been unable to restart without a full quick format
> and reinstall.
>
> Robert
>
> "craig" wrote:
>
> > last known configuration doesn't work, just hangs on me. and can i do a
> > system restore without the vista disc? i haven't been able to figure out
> > otherwise.
> > the real problem is that i don't have my cd, and i'm not living in my home
> > state this summer. i'd hate to have to fly back to get a cd.
> >
> > thanks for the advice. i'll remember to not trust the updates next time.
> >
> > (posting from work)
> >
> > "realcestmoi" wrote:
> >
> > > Hi there,
> > >
> > > Taking driver updates from windows updte is really a bad idea unless you
> > > like problems.
> > >
> > > Try usung system restore, boot last known good configuration or roll back on
> > > the driver.
> > >
> > > If a driver update is needed ( ONLY if the hardware is not working proper!)
> > > you should take it from the manufacturers website.
> > >
> > > Best regards,
> > > Michel Denie
> > >
> > > "craig" <> wrote in message
> > > newsF0E1A93-33F1-4306-97B8-...
> > > >I performed an automated upodate to install security patches etc, and an
> > > > NVidia network card update. After rebooting, windows failed to start and
> > > > times out and shuts down after the black screen with the loading bar. The
> > > > logo does not appear, just the bars. I was able to get a completely black
> > > > screen with a cursor at one point, but that was it. My vista disc is at
> > > > home
> > > > (600 miles away) and i am out of state for the summer. Any help?
> > >
> > >
> > >

 
Reply With Quote
 
craig
Guest
Posts: n/a

 
      07-13-2007
vista. this is posted under the "windows vista community"

"bronorb" wrote:

> Before you reinstall XP read through this article:
> http://webcast.broadcastnewsroom.com...le.jsp?id=8658
>
> I followed the steps there and got my system back to the point right before
> I lost it. It takes a while and only do it if you feel comfortable with the
> procedures.
> It assumes that you have the XP setup disk.
>
> Good luck.
>
>
> "RClaeson" wrote:
>
> > I have been through the revert to previous, repair, reinstall, format and
> > reinstall. My next tactic is to reinstall the patches one at at time until I
> > find the culprit. I have been unable to restart without a full quick format
> > and reinstall.
> >
> > Robert
> >
> > "craig" wrote:
> >
> > > last known configuration doesn't work, just hangs on me. and can i do a
> > > system restore without the vista disc? i haven't been able to figure out
> > > otherwise.
> > > the real problem is that i don't have my cd, and i'm not living in my home
> > > state this summer. i'd hate to have to fly back to get a cd.
> > >
> > > thanks for the advice. i'll remember to not trust the updates next time.
> > >
> > > (posting from work)
> > >
> > > "realcestmoi" wrote:
> > >
> > > > Hi there,
> > > >
> > > > Taking driver updates from windows updte is really a bad idea unless you
> > > > like problems.
> > > >
> > > > Try usung system restore, boot last known good configuration or roll back on
> > > > the driver.
> > > >
> > > > If a driver update is needed ( ONLY if the hardware is not working proper!)
> > > > you should take it from the manufacturers website.
> > > >
> > > > Best regards,
> > > > Michel Denie
> > > >
> > > > "craig" <> wrote in message
> > > > newsF0E1A93-33F1-4306-97B8-...
> > > > >I performed an automated upodate to install security patches etc, and an
> > > > > NVidia network card update. After rebooting, windows failed to start and
> > > > > times out and shuts down after the black screen with the loading bar. The
> > > > > logo does not appear, just the bars. I was able to get a completely black
> > > > > screen with a cursor at one point, but that was it. My vista disc is at
> > > > > home
> > > > > (600 miles away) and i am out of state for the summer. Any help?
> > > >
> > > >
> > > >

 
Reply With Quote
 
RClaeson
Guest
Posts: n/a

 
      07-16-2007
For me it appears to be update KB936357 is causing the problem. I have a 233
MHz MMX processor. It appears the microcode changes in that patch do not run
on an MMX processor. I ended up doing a quick format and a clean install to
get going. I now need to figure out how to restore the pieces which were
destroyed. I am expecting a followup call from MS sometime tomorrow, Monday.

Bob

"craig" wrote:

> vista. this is posted under the "windows vista community"
>
> "bronorb" wrote:
>
> > Before you reinstall XP read through this article:
> > http://webcast.broadcastnewsroom.com...le.jsp?id=8658
> >
> > I followed the steps there and got my system back to the point right before
> > I lost it. It takes a while and only do it if you feel comfortable with the
> > procedures.
> > It assumes that you have the XP setup disk.
> >
> > Good luck.
> >
> >
> > "RClaeson" wrote:
> >
> > > I have been through the revert to previous, repair, reinstall, format and
> > > reinstall. My next tactic is to reinstall the patches one at at time until I
> > > find the culprit. I have been unable to restart without a full quick format
> > > and reinstall.
> > >
> > > Robert
> > >
> > > "craig" wrote:
> > >
> > > > last known configuration doesn't work, just hangs on me. and can i do a
> > > > system restore without the vista disc? i haven't been able to figure out
> > > > otherwise.
> > > > the real problem is that i don't have my cd, and i'm not living in my home
> > > > state this summer. i'd hate to have to fly back to get a cd.
> > > >
> > > > thanks for the advice. i'll remember to not trust the updates next time.
> > > >
> > > > (posting from work)
> > > >
> > > > "realcestmoi" wrote:
> > > >
> > > > > Hi there,
> > > > >
> > > > > Taking driver updates from windows updte is really a bad idea unless you
> > > > > like problems.
> > > > >
> > > > > Try usung system restore, boot last known good configuration or roll back on
> > > > > the driver.
> > > > >
> > > > > If a driver update is needed ( ONLY if the hardware is not working proper!)
> > > > > you should take it from the manufacturers website.
> > > > >
> > > > > Best regards,
> > > > > Michel Denie
> > > > >
> > > > > "craig" <> wrote in message
> > > > > newsF0E1A93-33F1-4306-97B8-...
> > > > > >I performed an automated upodate to install security patches etc, and an
> > > > > > NVidia network card update. After rebooting, windows failed to start and
> > > > > > times out and shuts down after the black screen with the loading bar. The
> > > > > > logo does not appear, just the bars. I was able to get a completely black
> > > > > > screen with a cursor at one point, but that was it. My vista disc is at
> > > > > > home
> > > > > > (600 miles away) and i am out of state for the summer. Any help?
> > > > >
> > > > >
> > > > >

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Computer Fails To Start When Printer Is Connected Rob Windows Vista General Discussion 1 05-02-2008 09:04 AM
SP1 fails, computer doesn't start Lazlo Windows Vista Installation 2 03-19-2008 07:16 PM
WMI fails to connect to computer on Vista start Brahman Windows Vista Installation 0 01-30-2008 02:04 PM
Computer fails to start up Johnboy Windows Vista Installation 5 08-04-2007 03:56 PM
Win 98SE Update Fails To Start Christopher D Windows Update 4 02-07-2004 07:24 PM



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59