DCDIAG

I am trying to use dcdiag on a Windows Server 2008 R2 Server Core without
success. I have copied the DCDIAG.exe file from a Windows Server 2008 R2
Full Server to the server core machine and tried to run, however it fails
with an error as show below:

c:\Windows\System32>dcdiag /?
Resource ID 0x604 not found.
Unable to print Resource ID 0x604 .
Unable to print Resource ID 0x604 .
Resource ID 0x605 not found.
Unable to print Resource ID 0x605 .
Unable to print Resource ID 0x605 .
Resource ID 0x606 not found.
Unable to print Resource ID 0x606 .
Unable to print Resource ID 0x606 .
Resource ID 0x608 not found.
Unable to print Resource ID 0x608 .
Unable to print Resource ID 0x608 .
Resource ID 0x60a not found.
Unable to print Resource ID 0x60a .
Unable to print Resource ID 0x60a .
Resource ID 0x62a not found.
Unable to print Resource ID 0x62a .
Unable to print Resource ID 0x62a .
Advertising
Message 0xc0001839 not found.

CheckSDRefDom
Message 0xc000183a not found.

CheckSecurityError
Message 0xc000183b not found.
Resource ID 0x62d not found.
Unable to print Resource ID 0x62d .
Unable to print Resource ID 0x62d .

However if i map a drive from Server Core machine to the Windows Server 2008
R2 machine and then run dcdiag from the mapped drive it runs fine.

I want to use dcdiag to run some tests before promoting a server core
machine to a DC. The command i want to run is dcdiag /Test:dcpromo
/DnsDomain:<DomainName> /NewForest

Please let me know how i can use the copied dcdiag on server core. Is there
any dll registeration that needs to be done??

Hello Venkat,

Did you also copy the corresponding dcdiag.exe.mui file? You should have
dcdiag.exe located in C:\windows\system32 and C:\windows\syswow64 and dcdiag.exe.mui
in C:\windows\system32\en-us and C:\windows\syswow64\en-us or your language
fodlers.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> I am trying to use dcdiag on a Windows Server 2008 R2 Server Core
> without success. I have copied the DCDIAG.exe file from a Windows
> Server 2008 R2 Full Server to the server core machine and tried to
> run, however it fails with an error as show below:
>
> c:\Windows\System32>dcdiag /?
> Resource ID 0x604 not found.
> Unable to print Resource ID 0x604 .
> Unable to print Resource ID 0x604 .
> Resource ID 0x605 not found.
> Unable to print Resource ID 0x605 .
> Unable to print Resource ID 0x605 .
> Resource ID 0x606 not found.
> Unable to print Resource ID 0x606 .
> Unable to print Resource ID 0x606 .
> Resource ID 0x608 not found.
> Unable to print Resource ID 0x608 .
> Unable to print Resource ID 0x608 .
> Resource ID 0x60a not found.
> Unable to print Resource ID 0x60a .
> Unable to print Resource ID 0x60a .
> Resource ID 0x62a not found.
> Unable to print Resource ID 0x62a .
> Unable to print Resource ID 0x62a .
> Advertising
> Message 0xc0001839 not found.
> CheckSDRefDom
> Message 0xc000183a not found.
> CheckSecurityError
> Message 0xc000183b not found.
> Resource ID 0x62d not found.
> Unable to print Resource ID 0x62d .
> Unable to print Resource ID 0x62d .
> However if i map a drive from Server Core machine to the Windows
> Server 2008 R2 machine and then run dcdiag from the mapped drive it
> runs fine.
>
> I want to use dcdiag to run some tests before promoting a server core
> machine to a DC. The command i want to run is dcdiag /Test:dcpromo
> /DnsDomain:<DomainName> /NewForest
>
> Please let me know how i can use the copied dcdiag on server core. Is
> there any dll registeration that needs to be done??
>

Bingo!!!
Thanks Meinolf

"Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message
news: .com...
> Hello Venkat,
>
> Did you also copy the corresponding dcdiag.exe.mui file? You should have
> dcdiag.exe located in C:\windows\system32 and C:\windows\syswow64 and
> dcdiag.exe.mui in C:\windows\system32\en-us and C:\windows\syswow64\en-us
> or your language fodlers.
>
> Best regards
>
> Meinolf Weber
> Disclaimer: This posting is provided "AS IS" with no warranties, and
> confers no rights.
> ** Please do NOT email, only reply to Newsgroups
> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>
>> I am trying to use dcdiag on a Windows Server 2008 R2 Server Core
>> without success. I have copied the DCDIAG.exe file from a Windows
>> Server 2008 R2 Full Server to the server core machine and tried to
>> run, however it fails with an error as show below:
>>
>> c:\Windows\System32>dcdiag /?
>> Resource ID 0x604 not found.
>> Unable to print Resource ID 0x604 .
>> Unable to print Resource ID 0x604 .
>> Resource ID 0x605 not found.
>> Unable to print Resource ID 0x605 .
>> Unable to print Resource ID 0x605 .
>> Resource ID 0x606 not found.
>> Unable to print Resource ID 0x606 .
>> Unable to print Resource ID 0x606 .
>> Resource ID 0x608 not found.
>> Unable to print Resource ID 0x608 .
>> Unable to print Resource ID 0x608 .
>> Resource ID 0x60a not found.
>> Unable to print Resource ID 0x60a .
>> Unable to print Resource ID 0x60a .
>> Resource ID 0x62a not found.
>> Unable to print Resource ID 0x62a .
>> Unable to print Resource ID 0x62a .
>> Advertising
>> Message 0xc0001839 not found.
>> CheckSDRefDom
>> Message 0xc000183a not found.
>> CheckSecurityError
>> Message 0xc000183b not found.
>> Resource ID 0x62d not found.
>> Unable to print Resource ID 0x62d .
>> Unable to print Resource ID 0x62d .
>> However if i map a drive from Server Core machine to the Windows
>> Server 2008 R2 machine and then run dcdiag from the mapped drive it
>> runs fine.
>>
>> I want to use dcdiag to run some tests before promoting a server core
>> machine to a DC. The command i want to run is dcdiag /Test:dcpromo
>> /DnsDomain:<DomainName> /NewForest
>>
>> Please let me know how i can use the copied dcdiag on server core. Is
>> there any dll registeration that needs to be done??
>>
>
>

Hello Venkat,

You're welcome.

Best regards

Meinolf Weber
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
** Please do NOT email, only reply to Newsgroups
** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm


> Bingo!!!
> Thanks Meinolf
> "Meinolf Weber [MVP-DS]" <meiweb@(nospam)gmx.de> wrote in message
> news: .com...
>
>> Hello Venkat,
>>
>> Did you also copy the corresponding dcdiag.exe.mui file? You should
>> have dcdiag.exe located in C:\windows\system32 and
>> C:\windows\syswow64 and dcdiag.exe.mui in C:\windows\system32\en-us
>> and C:\windows\syswow64\en-us or your language fodlers.
>>
>> Best regards
>>
>> Meinolf Weber
>> Disclaimer: This posting is provided "AS IS" with no warranties, and
>> confers no rights.
>> ** Please do NOT email, only reply to Newsgroups
>> ** HELP us help YOU!!! http://www.blakjak.demon.co.uk/mul_crss.htm
>>> I am trying to use dcdiag on a Windows Server 2008 R2 Server Core
>>> without success. I have copied the DCDIAG.exe file from a Windows
>>> Server 2008 R2 Full Server to the server core machine and tried to
>>> run, however it fails with an error as show below:
>>>
>>> c:\Windows\System32>dcdiag /?
>>> Resource ID 0x604 not found.
>>> Unable to print Resource ID 0x604 .
>>> Unable to print Resource ID 0x604 .
>>> Resource ID 0x605 not found.
>>> Unable to print Resource ID 0x605 .
>>> Unable to print Resource ID 0x605 .
>>> Resource ID 0x606 not found.
>>> Unable to print Resource ID 0x606 .
>>> Unable to print Resource ID 0x606 .
>>> Resource ID 0x608 not found.
>>> Unable to print Resource ID 0x608 .
>>> Unable to print Resource ID 0x608 .
>>> Resource ID 0x60a not found.
>>> Unable to print Resource ID 0x60a .
>>> Unable to print Resource ID 0x60a .
>>> Resource ID 0x62a not found.
>>> Unable to print Resource ID 0x62a .
>>> Unable to print Resource ID 0x62a .
>>> Advertising
>>> Message 0xc0001839 not found.
>>> CheckSDRefDom
>>> Message 0xc000183a not found.
>>> CheckSecurityError
>>> Message 0xc000183b not found.
>>> Resource ID 0x62d not found.
>>> Unable to print Resource ID 0x62d .
>>> Unable to print Resource ID 0x62d .
>>> However if i map a drive from Server Core machine to the Windows
>>> Server 2008 R2 machine and then run dcdiag from the mapped drive it
>>> runs fine.
>>> I want to use dcdiag to run some tests before promoting a server
>>> core machine to a DC. The command i want to run is dcdiag
>>> /Test:dcpromo /DnsDomain:<DomainName> /NewForest
>>>
>>> Please let me know how i can use the copied dcdiag on server core.
>>> Is there any dll registeration that needs to be done??
>>>