Windows Vista Tips

Windows Vista Tips > Newsgroups > Windows Server > Windows Small Business Server > Deferred: 403 4.7.0 TLS handshake failed

Reply
Thread Tools Display Modes

Deferred: 403 4.7.0 TLS handshake failed

 
 
Roberto
Guest
Posts: n/a

 
      10-14-2004
I am getting this message, and I do not understand what happened with
exchange 2003. I am running SBS2003 Premiun Edition.
This is the whole message.
Thank you!
----- Transcript of session follows -----
<e-mail@DOMAIN>... Deferred: 403 4.7.0 TLS handshake failed.
Warning: message still undelivered after 4 hours
Will keep trying until message is 5 days old

The message is never delivered.
 
Reply With Quote
 
 
 
 
Douglas Boyd [MSFT]
Guest
Posts: n/a

 
      10-14-2004
Roberto

It sounds like you have have, enabled TLS in the properties of the default
SMTP virtual server. Check the properties of the default SMTP virutal
server in Exchange System Manager. Look on the Access Tab under
authentication and make sure there is no check in the requires TLS
authentication. If the box is checked remove the check and then restart the
virtual server.

I hope this helps

Doug Boyd


This post is provided "AS IS" with no warranties and confers no rights

 
Reply With Quote
 
 
 
 
Roberto
Guest
Posts: n/a

 
      10-14-2004
TLS is not checked in the SMTP Virtual Server.
Any other ideas, what could be the problem
Thank you!

"Douglas Boyd [MSFT]" wrote:

> Roberto
>
> It sounds like you have have, enabled TLS in the properties of the default
> SMTP virtual server. Check the properties of the default SMTP virutal
> server in Exchange System Manager. Look on the Access Tab under
> authentication and make sure there is no check in the requires TLS
> authentication. If the box is checked remove the check and then restart the
> virtual server.
>
> I hope this helps
>
> Doug Boyd
>
>
> This post is provided "AS IS" with no warranties and confers no rights
>
>

 
Reply With Quote
 
Ken Schaefer
Guest
Posts: n/a

 
      10-15-2004
In email@domain is the "domain" local (ie your domain) or some remote domain
out there on the internet?

Cheers
Ken

"Roberto" <> wrote in message
news:09757C1C-8711-4275-BCED-...
> TLS is not checked in the SMTP Virtual Server.
> Any other ideas, what could be the problem
> Thank you!
>
> "Douglas Boyd [MSFT]" wrote:
>
>> Roberto
>>
>> It sounds like you have have, enabled TLS in the properties of the
>> default
>> SMTP virtual server. Check the properties of the default SMTP virutal
>> server in Exchange System Manager. Look on the Access Tab under
>> authentication and make sure there is no check in the requires TLS
>> authentication. If the box is checked remove the check and then restart
>> the
>> virtual server.
>>
>> I hope this helps
>>
>> Doug Boyd
>>
>>
>> This post is provided "AS IS" with no warranties and confers no rights
>>
>>



 
Reply With Quote
 
Roberto
Guest
Posts: n/a

 
      10-15-2004
Thank you!
REMOTE:
Here is a copy of one of the messages. Now I am having the problem with 2
domains. one domains is ctc.com and the other one is: espotel.net

Is this my problem or their domain problem?

-----Original Message-----
From: Mail Delivery Subsystem [mailto:MAILER-]
Sent: Wednesday, October 13, 2004 3:01 PM
To: Brandenburg, Erika
Subject: Warning: could not send message for past 4 hours


**********************************************
** THIS IS A WARNING MESSAGE ONLY **
** YOU DO NOT NEED TO RESEND YOUR MESSAGE **
**********************************************

The original message was received at Wed, 13 Oct 2004 10:50:24 -0400
from server3.ctc.com [147.160.1.6]

----- Transcript of session follows -----
<>... Deferred: 403 4.7.0 TLS handshake failed.
Warning: message still undelivered after 4 hours
Will keep trying until message is 5 days old


"Ken Schaefer" wrote:

> In email@domain is the "domain" local (ie your domain) or some remote domain
> out there on the internet?
>
> Cheers
> Ken
>
> "Roberto" <> wrote in message
> news:09757C1C-8711-4275-BCED-...
> > TLS is not checked in the SMTP Virtual Server.
> > Any other ideas, what could be the problem
> > Thank you!
> >
> > "Douglas Boyd [MSFT]" wrote:
> >
> >> Roberto
> >>
> >> It sounds like you have have, enabled TLS in the properties of the
> >> default
> >> SMTP virtual server. Check the properties of the default SMTP virutal
> >> server in Exchange System Manager. Look on the Access Tab under
> >> authentication and make sure there is no check in the requires TLS
> >> authentication. If the box is checked remove the check and then restart
> >> the
> >> virtual server.
> >>
> >> I hope this helps
> >>
> >> Doug Boyd
> >>
> >>
> >> This post is provided "AS IS" with no warranties and confers no rights
> >>
> >>

>
>
>

 
Reply With Quote
 
Ken Schaefer
Guest
Posts: n/a

 
      10-18-2004
Sorry to take so long to get back to you.

I think it may be a problem at their end, or some kind of problem with your
server attempting to send mail to their domain. They may have enabled TLS at
their end (TLS uses certificates, and is similar to SSL for web (HTTP)
traffic), and for some reason setting up the TLS session is not working
properly (eg there is a problem with the certificate they are using, eg it
is not valid, doesn't match the DNS name of the server or is issued by a
non-trusted root CA).

Cheers
Ken

"Roberto" <> wrote in message
news:7DE34C40-E081-4D27-BFEF-...
> Thank you!
> REMOTE:
> Here is a copy of one of the messages. Now I am having the problem with 2
> domains. one domains is ctc.com and the other one is: espotel.net
>
> Is this my problem or their domain problem?
>
> -----Original Message-----
> From: Mail Delivery Subsystem [mailto:MAILER-]
> Sent: Wednesday, October 13, 2004 3:01 PM
> To: Brandenburg, Erika
> Subject: Warning: could not send message for past 4 hours
>
>
> **********************************************
> ** THIS IS A WARNING MESSAGE ONLY **
> ** YOU DO NOT NEED TO RESEND YOUR MESSAGE **
> **********************************************
>
> The original message was received at Wed, 13 Oct 2004 10:50:24 -0400
> from server3.ctc.com [147.160.1.6]
>
> ----- Transcript of session follows -----
> <>... Deferred: 403 4.7.0 TLS handshake failed.
> Warning: message still undelivered after 4 hours
> Will keep trying until message is 5 days old
>
>
> "Ken Schaefer" wrote:
>
>> In email@domain is the "domain" local (ie your domain) or some remote
>> domain
>> out there on the internet?
>>
>> Cheers
>> Ken
>>
>> "Roberto" <> wrote in message
>> news:09757C1C-8711-4275-BCED-...
>> > TLS is not checked in the SMTP Virtual Server.
>> > Any other ideas, what could be the problem
>> > Thank you!
>> >
>> > "Douglas Boyd [MSFT]" wrote:
>> >
>> >> Roberto
>> >>
>> >> It sounds like you have have, enabled TLS in the properties of the
>> >> default
>> >> SMTP virtual server. Check the properties of the default SMTP virutal
>> >> server in Exchange System Manager. Look on the Access Tab under
>> >> authentication and make sure there is no check in the requires TLS
>> >> authentication. If the box is checked remove the check and then
>> >> restart
>> >> the
>> >> virtual server.
>> >>
>> >> I hope this helps
>> >>
>> >> Doug Boyd
>> >>
>> >>
>> >> This post is provided "AS IS" with no warranties and confers no rights
>> >>
>> >>

>>
>>
>>



 
Reply With Quote
 
Roberto
Guest
Posts: n/a

 
      10-18-2004
Thank you! I will continue monitoring the situation and see what happens.
I really appreciate your comments.
Sincerely,
Roberto S.

"Ken Schaefer" wrote:

> Sorry to take so long to get back to you.
>
> I think it may be a problem at their end, or some kind of problem with your
> server attempting to send mail to their domain. They may have enabled TLS at
> their end (TLS uses certificates, and is similar to SSL for web (HTTP)
> traffic), and for some reason setting up the TLS session is not working
> properly (eg there is a problem with the certificate they are using, eg it
> is not valid, doesn't match the DNS name of the server or is issued by a
> non-trusted root CA).
>
> Cheers
> Ken
>
> "Roberto" <> wrote in message
> news:7DE34C40-E081-4D27-BFEF-...
> > Thank you!
> > REMOTE:
> > Here is a copy of one of the messages. Now I am having the problem with 2
> > domains. one domains is ctc.com and the other one is: espotel.net
> >
> > Is this my problem or their domain problem?
> >
> > -----Original Message-----
> > From: Mail Delivery Subsystem [mailto:MAILER-]
> > Sent: Wednesday, October 13, 2004 3:01 PM
> > To: Brandenburg, Erika
> > Subject: Warning: could not send message for past 4 hours
> >
> >
> > **********************************************
> > ** THIS IS A WARNING MESSAGE ONLY **
> > ** YOU DO NOT NEED TO RESEND YOUR MESSAGE **
> > **********************************************
> >
> > The original message was received at Wed, 13 Oct 2004 10:50:24 -0400
> > from server3.ctc.com [147.160.1.6]
> >
> > ----- Transcript of session follows -----
> > <>... Deferred: 403 4.7.0 TLS handshake failed.
> > Warning: message still undelivered after 4 hours
> > Will keep trying until message is 5 days old
> >
> >
> > "Ken Schaefer" wrote:
> >
> >> In email@domain is the "domain" local (ie your domain) or some remote
> >> domain
> >> out there on the internet?
> >>
> >> Cheers
> >> Ken
> >>
> >> "Roberto" <> wrote in message
> >> news:09757C1C-8711-4275-BCED-...
> >> > TLS is not checked in the SMTP Virtual Server.
> >> > Any other ideas, what could be the problem
> >> > Thank you!
> >> >
> >> > "Douglas Boyd [MSFT]" wrote:
> >> >
> >> >> Roberto
> >> >>
> >> >> It sounds like you have have, enabled TLS in the properties of the
> >> >> default
> >> >> SMTP virtual server. Check the properties of the default SMTP virutal
> >> >> server in Exchange System Manager. Look on the Access Tab under
> >> >> authentication and make sure there is no check in the requires TLS
> >> >> authentication. If the box is checked remove the check and then
> >> >> restart
> >> >> the
> >> >> virtual server.
> >> >>
> >> >> I hope this helps
> >> >>
> >> >> Doug Boyd
> >> >>
> >> >>
> >> >> This post is provided "AS IS" with no warranties and confers no rights
> >> >>
> >> >>
> >>
> >>
> >>

>
>
>

 
Reply With Quote
 
SBS-2003-Question
Guest
Posts: n/a

 
      10-19-2004
Douglas, Ken, and Roberto,
Sorry to hear of your current issues Roberto as, I am having a similar
problem and wished I had an answer for you but, my Exchange 2003 mail server
sends and receive just fine. However, when sending, messages sit in the
queue for hours despite having a refresh every two minutes selected. I also
compared all mail settings including what's starting up and what's not with
another Exchange 2003 server we have.

This all started right after I installed Exchange 2003's service pack 1.
Any ideas on a possible fix for our delayed queue issue? Thanks in advance.

"Douglas Boyd [MSFT]" wrote:

> Roberto
>
> It sounds like you have have, enabled TLS in the properties of the default
> SMTP virtual server. Check the properties of the default SMTP virutal
> server in Exchange System Manager. Look on the Access Tab under
> authentication and make sure there is no check in the requires TLS
> authentication. If the box is checked remove the check and then restart the
> virtual server.
>
> I hope this helps
>
> Doug Boyd
>
>
> This post is provided "AS IS" with no warranties and confers no rights
>
>

 
Reply With Quote
 
Roberto
Guest
Posts: n/a

 
      10-25-2004
Thank you for your message. My list of domains with problems continue to
increase and I hate to have to pay Microsoft for a problem I did not have
before the update.

"SBS-2003-Question" wrote:

> Douglas, Ken, and Roberto,
> Sorry to hear of your current issues Roberto as, I am having a similar
> problem and wished I had an answer for you but, my Exchange 2003 mail server
> sends and receive just fine. However, when sending, messages sit in the
> queue for hours despite having a refresh every two minutes selected. I also
> compared all mail settings including what's starting up and what's not with
> another Exchange 2003 server we have.
>
> This all started right after I installed Exchange 2003's service pack 1.
> Any ideas on a possible fix for our delayed queue issue? Thanks in advance.
>
> "Douglas Boyd [MSFT]" wrote:
>
> > Roberto
> >
> > It sounds like you have have, enabled TLS in the properties of the default
> > SMTP virtual server. Check the properties of the default SMTP virutal
> > server in Exchange System Manager. Look on the Access Tab under
> > authentication and make sure there is no check in the requires TLS
> > authentication. If the box is checked remove the check and then restart the
> > virtual server.
> >
> > I hope this helps
> >
> > Doug Boyd
> >
> >
> > This post is provided "AS IS" with no warranties and confers no rights
> >
> >

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
SSL/TLS LDAP Query --> Error initialising SSL/TLS Björn Urbanek Windows Server 1 05-10-2007 06:39 AM
PEAP-TLS vs EAP-TLS mobilemobile Server Security 19 06-13-2006 04:09 AM
SMTP 403 4.7.0 TLS Handshake Failed - ISA 2004 Dale Networkguy Windows Small Business Server 7 07-26-2005 11:56 AM
Deferred: 403 4.7.0 TLS handshake failed. Roberto Windows Small Business Server 1 10-19-2004 12:38 PM
Deferred: 403 4.7.0 TLS handshake failed bryan Windows Small Business Server 3 04-26-2004 11:47 PM