dialer.exe

I have used this program to dial my land line phone, using a Lotus Smart
Center phonebook and later the dialer.exe phonebook, since windows 95. So
far, in Vista, I can only dial numbers within my area code. There is a place
to set up "dialing rules", but no matter how I do that, only the first digit
of the area code is dialed. There is a "help' button, but no help file
actually exists. Dose anyone know how to make this work"
--
pbpapa

I received an email from someone with the same problem a few months back. As
I couldn't answer the question I contacted Microsoft UK. They, are looking
into it to see if they can provide me with a suitable answer/workaround. The
currently problem is finding someone who at Microsoft that actually uses the
dialler software. Lets just say I'm still waiting on that reply.


--

--
John Barnett MVP
Windows XP Associate Expert
Windows Desktop Experience

Web: http://xphelpandsupport.mvps.org
Web: http://vistasupport.mvps.org
Web: http://www.silversurfer-guide.com

The information in this mail/post is supplied "as is". No warranty of any
kind, either expressed or implied, is made in relation to the accuracy,
reliability or content of this mail/post. The Author shall not be liable for
any direct, indirect, incidental or consequential damages arising out of the
use of, or inability to use, information or opinions expressed in this
mail/post..


"pbpapa" <> wrote in message
news:0CD7E0EF-3B39-4790-B5B1-...
> I have used this program to dial my land line phone, using a Lotus Smart
> Center phonebook and later the dialer.exe phonebook, since windows 95. So
> far, in Vista, I can only dial numbers within my area code. There is a
> place
> to set up "dialing rules", but no matter how I do that, only the first
> digit
> of the area code is dialed. There is a "help' button, but no help file
> actually exists. Dose anyone know how to make this work"
> --
> pbpapa

I've never used your program, but have you tried installing it in XP SP2
compatibility mode, if it worked OK in XP?

Right-click on the .exe>Compatibility tab> and install in XP SP2 mode
--
Mad Mike


"pbpapa" wrote:

> I have used this program to dial my land line phone, using a Lotus Smart
> Center phonebook and later the dialer.exe phonebook, since windows 95. So
> far, in Vista, I can only dial numbers within my area code. There is a place
> to set up "dialing rules", but no matter how I do that, only the first digit
> of the area code is dialed. There is a "help' button, but no help file
> actually exists. Dose anyone know how to make this work"
> --
> pbpapa

--Thanks for the reply. I am probably the one who emailed you before. I
suspect MS wants me to use their internet calling program, but that is the
work of a power mad demon who wants to take control of my life. Please do
post again if you come up with something. I found a freeware program "my
phone book dialer" but it is a little clumsy compared to the old dialer.exe,
which I managed to load on my Vista machine, but Vista doesn't like it!
Thanks again, CFF
pbpapa


"pbpapa" wrote:

> I have used this program to dial my land line phone, using a Lotus Smart
> Center phonebook and later the dialer.exe phonebook, since windows 95. So
> far, in Vista, I can only dial numbers within my area code. There is a place
> to set up "dialing rules", but no matter how I do that, only the first digit
> of the area code is dialed. There is a "help' button, but no help file
> actually exists. Dose anyone know how to make this work"
> --
> pbpapa

Mick, Phone dialer is part of the Windows operating system. Type 'dialer'
into the run box and you will see for yourself.

--

--
John Barnett MVP
Windows XP Associate Expert
Windows Desktop Experience

Web: http://xphelpandsupport.mvps.org
Web: http://vistasupport.mvps.org
Web: http://www.silversurfer-guide.com

The information in this mail/post is supplied "as is". No warranty of any
kind, either expressed or implied, is made in relation to the accuracy,
reliability or content of this mail/post. The Author shall not be liable for
any direct, indirect, incidental or consequential damages arising out of the
use of, or inability to use, information or opinions expressed in this
mail/post..


"Mick Murphy" <> wrote in message
news:B08A88D1-EAFF-4B98-B0DD-...
> I've never used your program, but have you tried installing it in XP SP2
> compatibility mode, if it worked OK in XP?
>
> Right-click on the .exe>Compatibility tab> and install in XP SP2 mode
> --
> Mad Mike
>
>
> "pbpapa" wrote:
>
>> I have used this program to dial my land line phone, using a Lotus Smart
>> Center phonebook and later the dialer.exe phonebook, since windows 95. So
>> far, in Vista, I can only dial numbers within my area code. There is a
>> place
>> to set up "dialing rules", but no matter how I do that, only the first
>> digit
>> of the area code is dialed. There is a "help' button, but no help file
>> actually exists. Dose anyone know how to make this work"
>> --
>> pbpapa

Hi pbpapa,

Having checked my records, yes you are the person who emailed me. My
apologies for not getting back to you, but as I stated in my earlier post, I
have been waiting for a reply from Microsoft UK.

As soon as I get a suitable reply I will post the details here and also
personally email you with any suggestions.

Unfortunately I can't say how long it will be before I get a reply, but your
email has been flagged to remind me that you are awaiting an answer.


--

--
John Barnett MVP
Windows XP Associate Expert
Windows Desktop Experience

Web: http://xphelpandsupport.mvps.org
Web: http://vistasupport.mvps.org
Web: http://www.silversurfer-guide.com

The information in this mail/post is supplied "as is". No warranty of any
kind, either expressed or implied, is made in relation to the accuracy,
reliability or content of this mail/post. The Author shall not be liable for
any direct, indirect, incidental or consequential damages arising out of the
use of, or inability to use, information or opinions expressed in this
mail/post..


"pbpapa" <> wrote in message
news:4519C000-D3A1-4226-A66C-...
>
> --Thanks for the reply. I am probably the one who emailed you before. I
> suspect MS wants me to use their internet calling program, but that is the
> work of a power mad demon who wants to take control of my life. Please do
> post again if you come up with something. I found a freeware program "my
> phone book dialer" but it is a little clumsy compared to the old
> dialer.exe,
> which I managed to load on my Vista machine, but Vista doesn't like it!
> Thanks again, CFF
> pbpapa
>
>
> "pbpapa" wrote:
>
>> I have used this program to dial my land line phone, using a Lotus Smart
>> Center phonebook and later the dialer.exe phonebook, since windows 95. So
>> far, in Vista, I can only dial numbers within my area code. There is a
>> place
>> to set up "dialing rules", but no matter how I do that, only the first
>> digit
>> of the area code is dialed. There is a "help' button, but no help file
>> actually exists. Dose anyone know how to make this work"
>> --
>> pbpapa

I am having the same problem with version 6.0 Build 6001: Service Pack 1
running on Windows Vista Business Service Pack 1 (i.e. 2nd and 3rd digits of
the area code are lost; 231-456-7890 becomes 2-456-7890). This happens
regardless of the dialing rule settings (e.g. disable call waiting, dial full
area code, dial 1, etc.). It happens when faxing using Windows unless the
setting is used to dial the number exactly as entered and skip
checking/applying dialing rules. I did not have this problem using the
Windows XP Professional Service Pack 2 version of dialer.exe. I wonder what
changed to cause it to drop the 2nd and 3rd digits of the area code. Very
frustrating!

"pbpapa" wrote:

> I have used this program to dial my land line phone, using a Lotus Smart
> Center phonebook and later the dialer.exe phonebook, since windows 95. So
> far, in Vista, I can only dial numbers within my area code. There is a place
> to set up "dialing rules", but no matter how I do that, only the first digit
> of the area code is dialed. There is a "help' button, but no help file
> actually exists. Dose anyone know how to make this work"
> --
> pbpapa

URGH, apparently, according to
http://www.vistax64.com/vista-mail/6...ts-dialer.html

we must store our numbers in Canonical (International) format. Instead of "1
555 555-5555", store the number as "+1 (555) 555-5555". The first number
will confuse dialing rules and result in the number "1 5 555-5555" being
dialed, a number which obviously won't work. Try it yourself, change the
number format to "+1 (555) 555-5555" and see what happens.

http://support.microsoft.com/kb/247192/en-us
You Must Enter Telephone Numbers in Canonical Form in Order to Use Dialing
Rules
http://support.microsoft.com/kb/318575/en-us
Dialing rules may not be applied to tools such as Fax and Phone Dialer on
Windows XP-based and Windows Vista-based computers


Kind of a hassle?

"pbpapa" wrote:

> I have used this program to dial my land line phone, using a Lotus Smart
> Center phonebook and later the dialer.exe phonebook, since windows 95. So
> far, in Vista, I can only dial numbers within my area code. There is a place
> to set up "dialing rules", but no matter how I do that, only the first digit
> of the area code is dialed. There is a "help' button, but no help file
> actually exists. Dose anyone know how to make this work"
> --
> pbpapa

Try this one

Predictive Dialers - 'IAT - CTI: Predictive Dialer | Hosted Services
Broadcast Messaging' (http://www.iat-cti.com

\" Don’t look for endings when you need a beginning.\

Lance H. Hegland;1115624 Wrote:
> URGH, apparently, according t
> 'Contacts Dialer - Vista Forums
> (http://www.vistax64.com/vista-mail/6...ts-dialer.html
>
> we must store our numbers in Canonical (International) format. Instea
> of "
> 555 555-5555", store the number as "+1 (555) 555-5555". The firs
> numbe
> will confuse dialing rules and result in the number "1 5 555-5555
> bein
> dialed, a number which obviously won't work. Try it yourself, chang
> th
> number format to "+1 (555) 555-5555" and see what happens
>
> 'You Must Enter Telephone Numbers in Canonical Form in Order to Us
> Dialing Rules' (http://support.microsoft.com/kb/247192/en-us
> You Must Enter Telephone Numbers in Canonical Form in Order to Us
> Dialin
> Rule
> 'Dialing rules may not be applied to tools such as Fax and Phone Diale
> on Windows XP-based and Windows Vista-based computers
> (http://support.microsoft.com/kb/318575/en-us
> Dialing rules may not be applied to tools such as Fax and Phone Diale
> o
> Windows XP-based and Windows Vista-based computer
>
>
> Kind of a hassle
>
> "pbpapa" wrote
>
> > I have used this program to dial my land line phone, using a Lotu
> Smar
> > Center phonebook and later the dialer.exe phonebook, since window
> 95. S
> > far, in Vista, I can only dial numbers within my area code. There i
> a plac
> > to set up "dialing rules", but no matter how I do that, only th
> first digi
> > of the area code is dialed. There is a "help' button, but no hel
> fil
> > actually exists. Dose anyone know how to make this work
> > -
> > pbpap

--
nathon
Posted via http://www.vistaheads.co