Driver Problem - USB webcam + setupapi.dev.log

Im having some troubles installing my USB webcam, its a Sweex WC001.
*link* http://www.sweex.com/producten.php?s...56&artikel=748
Its Vista compatable, there are two versions of firmware around, i tried
both.

Problem:
Firmware installed, Webcam doesnt seem to be "located"
Webcam appears in the devices list as "USB Camera" with a yellow triangle.
--> Double click gives "no driver software installed" So i click -->
Install driver software, browse.
Browse to the driver files, "no driver file found" Browse to C://Windows:

"windows found driver software but encountered an error while attempting to
install it." "PC Camera 6005 CIF" "The system cannot find the file specified."

Thats it, AMCAP (webcam capture program) gives the following error: "no
video capturing hardware found"


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>
setupapi.dev.log contains:

>>> [Device Install (DiShowUpdateDevice) - USB\VID_0C45&PID_6005\5&38E33CCA&0&1]
>>> Section start 2007/11/28 19:20:29.825
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
dvi: {DIF_UPDATEDRIVER_UI} 19:20:29.826
dvi: No class installer for 'USB camera'
dvi: Default installer: Enter 19:20:29.828
dvi: Default installer: Exit
dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 19:20:29.830
ndv: {Update Driver Software Wizard for
USB\VID_0C45&PID_6005\5&38E33CCA&0&1}
inf: {SetupCopyOEMInf: C:\Windows\INF\oem2.inf} 19:21:09.120
inf: {SetupCopyOEMInf exit (0x00000002)} 19:21:09.122
!!! ndv: Driver Package import failed for new device...installing NULL
driver.
!!! ndv: Error 2: The system cannot find the file specified.
dvi: {Plug and Play Service: Device Install for
USB\VID_0C45&PID_6005\5&38E33CCA&0&1}
ump: Creating Install Process: DrvInst.exe 19:21:09.127
! ndv: Installing NULL driver!
dvi: Set selected driver complete.
pol: Device installation is subject to policy
dvi: {DIF_ALLOW_INSTALL} 19:21:09.303
dvi: No class installer for 'USB camera'
dvi: No CoInstallers found
dvi: Default installer: Enter 19:21:09.305
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 19:21:09.307
dvi: {DIF_INSTALLDEVICE} 19:21:09.307
dvi: No class installer for 'USB camera'
dvi: Default installer: Enter 19:21:09.309
! dvi: Installing NULL driver!
dvi: Writing common driver property settings.
dvi: {Restarting Devices} 19:21:09.349
dvi: Restart:
USB\VID_0C45&PID_6005\5&38E33CCA&0&1
dvi: Restart complete.
dvi: {Restarting Devices exit} 19:21:09.495
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 19:21:09.496
ump: Server install process exited with code 0x00000000
19:21:09.526
ump: {Plug and Play Service: Device Install exit(00000000)}
ndv: {Update Driver Software Wizard exit(00000002)}
<<< Section end 2007/11/28 19:25:06.671
<<< [Exit status: FAILURE(0x00000002)]

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Another thing to note, USBDeview entry:

Port_#0001.Hub_#0005 @usb.inf,%usb\composite.devicedesc%;USB Composite
Device Unknown Yes Yes 29-11-2007 19:09:52 29-11-2007
0:32:41 046d c517 00 00 00 Hub 2, Port 1


"vertigo" wrote:

>
> Im having some troubles installing my USB webcam, its a Sweex WC001.
> *link* http://www.sweex.com/producten.php?s...56&artikel=748
> Its Vista compatable, there are two versions of firmware around, i tried
> both.
>
> Problem:
> Firmware installed, Webcam doesnt seem to be "located"
> Webcam appears in the devices list as "USB Camera" with a yellow triangle.
> --> Double click gives "no driver software installed" So i click -->
> Install driver software, browse.
> Browse to the driver files, "no driver file found" Browse to C://Windows:
>
> "windows found driver software but encountered an error while attempting to
> install it." "PC Camera 6005 CIF" "The system cannot find the file specified."
>
> Thats it, AMCAP (webcam capture program) gives the following error: "no
> video capturing hardware found"
>
>
> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>
> setupapi.dev.log contains:
>
> >>> [Device Install (DiShowUpdateDevice) - USB\VID_0C45&PID_6005\5&38E33CCA&0&1]
> >>> Section start 2007/11/28 19:20:29.825
> cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
> dvi: {DIF_UPDATEDRIVER_UI} 19:20:29.826
> dvi: No class installer for 'USB camera'
> dvi: Default installer: Enter 19:20:29.828
> dvi: Default installer: Exit
> dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 19:20:29.830
> ndv: {Update Driver Software Wizard for
> USB\VID_0C45&PID_6005\5&38E33CCA&0&1}
> inf: {SetupCopyOEMInf: C:\Windows\INF\oem2.inf} 19:21:09.120
> inf: {SetupCopyOEMInf exit (0x00000002)} 19:21:09.122
> !!! ndv: Driver Package import failed for new device...installing NULL
> driver.
> !!! ndv: Error 2: The system cannot find the file specified.
> dvi: {Plug and Play Service: Device Install for
> USB\VID_0C45&PID_6005\5&38E33CCA&0&1}
> ump: Creating Install Process: DrvInst.exe 19:21:09.127
> ! ndv: Installing NULL driver!
> dvi: Set selected driver complete.
> pol: Device installation is subject to policy
> dvi: {DIF_ALLOW_INSTALL} 19:21:09.303
> dvi: No class installer for 'USB camera'
> dvi: No CoInstallers found
> dvi: Default installer: Enter 19:21:09.305
> dvi: Default installer: Exit
> dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 19:21:09.307
> dvi: {DIF_INSTALLDEVICE} 19:21:09.307
> dvi: No class installer for 'USB camera'
> dvi: Default installer: Enter 19:21:09.309
> ! dvi: Installing NULL driver!
> dvi: Writing common driver property settings.
> dvi: {Restarting Devices} 19:21:09.349
> dvi: Restart:
> USB\VID_0C45&PID_6005\5&38E33CCA&0&1
> dvi: Restart complete.
> dvi: {Restarting Devices exit} 19:21:09.495
> dvi: Default installer: Exit
> dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 19:21:09.496
> ump: Server install process exited with code 0x00000000
> 19:21:09.526
> ump: {Plug and Play Service: Device Install exit(00000000)}
> ndv: {Update Driver Software Wizard exit(00000002)}
> <<< Section end 2007/11/28 19:25:06.671
> <<< [Exit status: FAILURE(0x00000002)]
>
> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Hi vertigo,

did you find a solution for this?...

I experience something similar.

USB webcam brand: PC line

It has functioned with my windows vista computer, but since being uncplugged
& reconnected, I am told each time that a new device is detected & go through
the device installation drill.

Result:
"Windows encountered a problem installing the driver software for your device

Windows found driver software for your device but encountered an error while
attempting to install it.

USB2.0 PC Camera (SN9C202)

The system cannot find the file specified."

any suggestions?....

"vertigo" wrote:

> Another thing to note, USBDeview entry:
>
> Port_#0001.Hub_#0005 @usb.inf,%usb\composite.devicedesc%;USB Composite
> Device Unknown Yes Yes 29-11-2007 19:09:52 29-11-2007
> 0:32:41 046d c517 00 00 00 Hub 2, Port 1
>
>
> "vertigo" wrote:
>
> >
> > Im having some troubles installing my USB webcam, its a Sweex WC001.
> > *link* http://www.sweex.com/producten.php?s...56&artikel=748
> > Its Vista compatable, there are two versions of firmware around, i tried
> > both.
> >
> > Problem:
> > Firmware installed, Webcam doesnt seem to be "located"
> > Webcam appears in the devices list as "USB Camera" with a yellow triangle.
> > --> Double click gives "no driver software installed" So i click -->
> > Install driver software, browse.
> > Browse to the driver files, "no driver file found" Browse to C://Windows:
> >
> > "windows found driver software but encountered an error while attempting to
> > install it." "PC Camera 6005 CIF" "The system cannot find the file specified."
> >
> > Thats it, AMCAP (webcam capture program) gives the following error: "no
> > video capturing hardware found"
> >
> >
> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>
> > setupapi.dev.log contains:
> >
> > >>> [Device Install (DiShowUpdateDevice) - USB\VID_0C45&PID_6005\5&38E33CCA&0&1]
> > >>> Section start 2007/11/28 19:20:29.825
> > cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
> > dvi: {DIF_UPDATEDRIVER_UI} 19:20:29.826
> > dvi: No class installer for 'USB camera'
> > dvi: Default installer: Enter 19:20:29.828
> > dvi: Default installer: Exit
> > dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 19:20:29.830
> > ndv: {Update Driver Software Wizard for
> > USB\VID_0C45&PID_6005\5&38E33CCA&0&1}
> > inf: {SetupCopyOEMInf: C:\Windows\INF\oem2.inf} 19:21:09.120
> > inf: {SetupCopyOEMInf exit (0x00000002)} 19:21:09.122
> > !!! ndv: Driver Package import failed for new device...installing NULL
> > driver.
> > !!! ndv: Error 2: The system cannot find the file specified.
> > dvi: {Plug and Play Service: Device Install for
> > USB\VID_0C45&PID_6005\5&38E33CCA&0&1}
> > ump: Creating Install Process: DrvInst.exe 19:21:09.127
> > ! ndv: Installing NULL driver!
> > dvi: Set selected driver complete.
> > pol: Device installation is subject to policy
> > dvi: {DIF_ALLOW_INSTALL} 19:21:09.303
> > dvi: No class installer for 'USB camera'
> > dvi: No CoInstallers found
> > dvi: Default installer: Enter 19:21:09.305
> > dvi: Default installer: Exit
> > dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 19:21:09.307
> > dvi: {DIF_INSTALLDEVICE} 19:21:09.307
> > dvi: No class installer for 'USB camera'
> > dvi: Default installer: Enter 19:21:09.309
> > ! dvi: Installing NULL driver!
> > dvi: Writing common driver property settings.
> > dvi: {Restarting Devices} 19:21:09.349
> > dvi: Restart:
> > USB\VID_0C45&PID_6005\5&38E33CCA&0&1
> > dvi: Restart complete.
> > dvi: {Restarting Devices exit} 19:21:09.495
> > dvi: Default installer: Exit
> > dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 19:21:09.496
> > ump: Server install process exited with code 0x00000000
> > 19:21:09.526
> > ump: {Plug and Play Service: Device Install exit(00000000)}
> > ndv: {Update Driver Software Wizard exit(00000002)}
> > <<< Section end 2007/11/28 19:25:06.671
> > <<< [Exit status: FAILURE(0x00000002)]
> >
> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>