Error Code 0x800706BE via KB922770 Security Update .NET framework

Error Code 0x800706BE via KB922770 Security Update .NET framework 2.0

Update history show the above. Trying to install the update hangs microsoft
update so hard it won't cancel, stop, be killed, allow a log-off or shutdown.
Anyone else had the problem or a solution?
--
Rich Harris
Senior Systems and Programming Analyst
Santa Barbara county APCD

I am having the same problem. Havent seen much about it. Did you find a
solution?

Tim


Rich Harris wrote:
> Error Code 0x800706BE via KB922770 Security Update .NET framework 2.0
>
> Update history show the above. Trying to install the update hangs microsoft
> update so hard it won't cancel, stop, be killed, allow a log-off or shutdown.
> Anyone else had the problem or a solution?
> --
> Rich Harris
> Senior Systems and Programming Analyst
> Santa Barbara county APCD

I had exactly the same problem. Solution according to message is to first try
and re-install the update. But I don't know how to do that.

"" wrote:

> I am having the same problem. Havent seen much about it. Did you find a
> solution?
>
> Tim
>
>
> Rich Harris wrote:
> > Error Code 0x800706BE via KB922770 Security Update .NET framework 2.0
> >
> > Update history show the above. Trying to install the update hangs microsoft
> > update so hard it won't cancel, stop, be killed, allow a log-off or shutdown.
> > Anyone else had the problem or a solution?
> > --
> > Rich Harris
> > Senior Systems and Programming Analyst
> > Santa Barbara county APCD
>
>

No solution yet. Just deselect the framework in Microsoft Update. Still
looking.
--
Rich Harris
Senior Systems and Programming Analyst
Santa Barbara county APCD


"" wrote:

> I am having the same problem. Havent seen much about it. Did you find a
> solution?
>
> Tim
>
>
> Rich Harris wrote:
> > Error Code 0x800706BE via KB922770 Security Update .NET framework 2.0
> >
> > Update history show the above. Trying to install the update hangs microsoft
> > update so hard it won't cancel, stop, be killed, allow a log-off or shutdown.
> > Anyone else had the problem or a solution?
> > --
> > Rich Harris
> > Senior Systems and Programming Analyst
> > Santa Barbara county APCD
>
>

You can reinstall the update in a lot of ways. The easiest is to run
'Windows Update' or 'Microsoft Update' from the 'Start' / 'All Prograns'
menu. Or you can follow the links to the security bulletin and use the
download link there to get just the framework package.

I may try to force a reinstall of Framework 2.0 next if I can find a patched
version.

I also put in an email help request to Microsoft and I haven't heard
anything there and it's coming up on 24 hours.
--
Rich Harris
Senior Systems and Programming Analyst
Santa Barbara county APCD


"Deeg" wrote:

> I had exactly the same problem. Solution according to message is to first try
> and re-install the update. But I don't know how to do that.
>
> "" wrote:
>
> > I am having the same problem. Havent seen much about it. Did you find a
> > solution?
> >
> > Tim
> >
> >
> > Rich Harris wrote:
> > > Error Code 0x800706BE via KB922770 Security Update .NET framework 2.0
> > >
> > > Update history show the above. Trying to install the update hangs microsoft
> > > update so hard it won't cancel, stop, be killed, allow a log-off or shutdown.
> > > Anyone else had the problem or a solution?
> > > --
> > > Rich Harris
> > > Senior Systems and Programming Analyst
> > > Santa Barbara county APCD
> >
> >

Rich, thanks. I guess I'll try the download link, as no update appears using
the normal MicrosoftUpdate. I suspect things really turned rotten due to a
hard crash/stop at failure time. For your information here's a summary of
other responses from a thread started Oct 10:


<< "Rob J" wrote:

> Try the following:
> download and run the file at
> http://astebner.sts.winisp.net/Tools...eanup_tool.zip
> for .NET 2.0
>
> Log onto the Microsoft Update web site - custom - and reinstall .NET 2.0 -
> after the reinstall select custom again and you should get 2 priority updates
> - install both.
>
> This worked for me - hope it helps
>
> "joelw135" wrote:
>
> > I am unable to install the latest security update to Framework 2.0 it fails
> > everytime.
> > I have tried to manual install with no success.

Thank you for your very good advice. I performed exactly what you have
written
and it worked for me like a charm. When I ran the file "cleanup_tool.exe" I
choose the option to cleanup ".NET Framework - All Versions".
Thanks again
Zeev

---

Bit of a problem with re-instal of .NET 2 due to an installation monitoring
program - disabled monitor prog and everything went fine


you so much! Worked great on two machines. Third machine did not need
the fix.

Curious though..

Three machines... All Legally Licensed installation CD's of Microsoft
Windows XP Professional (Three total). Found one difference...

First Machine... XP Professional with SP1 included on CD
updated to SP2 with the Windows XP Service Pack 2 CD from Microsoft...
Security Update for Microsoft .NET Framework, Version 2.0 (KB922770) would
not install... until using your method. Thanks!

Second Machine... another XP Professional with SP1 included on CD updated to
SP2 with the Windows XP Service Pack 2 CD from Microsoft... Security Update
for Microsoft .NET Framework, Version 2.0 (KB922770) would not install...
until using your method. Thanks again!

Third Machine... XP Professional with SP2 included on CD. The Security
Update for Microsoft .NET Framework, Version 2.0 (KB922770) updated
successfully without having the change anything.

Only difference between the machines is the way SP2 had been installed. The
last time there was a security update for the Microsoft .NET Framework,
Version 2.0, I had to use a work around for the first and second machines
then as well but not the third machine. Go Figure. Not sure the relation or
why.
Thank you again for your help.

---

Thanks for the advice Rob. KB922770 finally installed!
I did the same as "zsmi":> clean up all versions. I have SP2. When I went
back to Microsoft Update, there were three (3) SP1 updates (1. KB886903, 2.
Microsoft .NET Framework 1.1 Service Pack 1, and 3. Microsoft .NET Framework
version 1.1). I went ahead and installed all udpdates.
Should I get SP1 updates when I have SP2? Did cleaning up all versions mess
things up of am I O.K.?

---

go to Downloads.Microsoft.com
download/save to a temp folder .NET 2.0 dated a few months ago

uninstall from add/remove your current .NET 2.0
reboot then install the current .NET you downloaded
return to update.Microsoft.com for the update

---

This worked after trying a "normal" install 3 times! Went to microsoft.com
then to download section and d/led the latest net 2.0, uninstalled the old
2.0, rebooted installed the new version, then went to microsoft update and lo
and behold!! It worked!!

--- >>

=================================================


"Rich Harris" wrote:

> You can reinstall the update in a lot of ways. The easiest is to run
> 'Windows Update' or 'Microsoft Update' from the 'Start' / 'All Prograns'
> menu. Or you can follow the links to the security bulletin and use the
> download link there to get just the framework package.
>
> I may try to force a reinstall of Framework 2.0 next if I can find a patched
> version.
>
> I also put in an email help request to Microsoft and I haven't heard
> anything there and it's coming up on 24 hours.
> --
> Rich Harris
> Senior Systems and Programming Analyst
> Santa Barbara county APCD
>
>
> "Deeg" wrote:
>
> > I had exactly the same problem. Solution according to message is to first try
> > and re-install the update. But I don't know how to do that.
> >
> > "" wrote:
> >
> > > I am having the same problem. Havent seen much about it. Did you find a
> > > solution?
> > >
> > > Tim
> > >
> > >
> > > Rich Harris wrote:
> > > > Error Code 0x800706BE via KB922770 Security Update .NET framework 2.0
> > > >
> > > > Update history show the above. Trying to install the update hangs microsoft
> > > > update so hard it won't cancel, stop, be killed, allow a log-off or shutdown.
> > > > Anyone else had the problem or a solution?
> > > > --
> > > > Rich Harris
> > > > Senior Systems and Programming Analyst
> > > > Santa Barbara county APCD
> > >
> > >

I tried add/remove. The installer crashes on both 'repair & 'remove'.
I tried a new install. The installer only allows & crashes on both 'repair
& 'remove'.
--
Rich Harris
Senior Systems and Programming Analyst
Santa Barbara county APCD


"Rich Harris" wrote:

> Error Code 0x800706BE via KB922770 Security Update .NET framework 2.0
>
> Update history show the above. Trying to install the update hangs microsoft
> update so hard it won't cancel, stop, be killed, allow a log-off or shutdown.
> Anyone else had the problem or a solution?
> --
> Rich Harris
> Senior Systems and Programming Analyst
> Santa Barbara county APCD

I believe that I have solved the primary problem. But I'm not sure of the
original cause nor of any other effects of the original cause. I'm also not
sure of the side effects of my cure.

I have been able to apply the .NET Framework 2.0 Security Update.

The security Updates setup.exe was failing or hanging. Indeed any method
for manipulating the .NET framework was failing or hanging. The root cause
seemed to be the fact that the IIS Admin Service would fail to stop because
it failed to stop the WWWP & FTP service because the services were in a
'starting' state and could not be stopped nor whould they go to started. As
a result the default web site on the client was not started and was probably
hung somewhat also. Setup.exe failed to finish and in fact hung hard because
it could not stop the IIS Admin service.

At this point;
1 the security upgrade wouldn't run by any method tried.
2 It hung 'Microsoft Update' & 'Windows Update' in express mode or custom if
fw 2.0 was selected.
3 the hung update could not be killed, most of the time.
a) Nor would the PC shut-down,
b) nor restart,
c) nor allow a log off.
A System power off WAS required. System was functional though.
4 the framework would not repair or remove, setup hung of course.
5 iis admin was hung trying to shutdown. could only be stopped by killing
inetinfo.exe.
6 wwwp & ftp services were in a starting state and could not be stopped.
Had to set to disable, wait, let fw2.0 repair run a bit till it hung again,
reset wwwp & ftp to automatic, wait, set to disable, wait, set to automatic.
Repair then finished with FW 2.0.

[Repair appeared to need to be done because windows thought the Update was
not finished yet. This appeared to cause all sorts of issues. The FW2.0
repair appeared to fix these.]

Problem was not solved. Still couldn't run Security Update, www & ftp were
not running, default web site was down, many tools & services didn't run or
were bad.

Had to use Add/Remove Windows components to remove WWW services and
everything under it. After adding those back, and another repair of fw 2.0
(I think) the Security Update would finally run. The services I know to
check seemed to be running correctly.

I do not believe that IIS Admin service, WWWP service, & FTP service were in
trouble before the October updates were applied by "Microsoft Update". I
don't know this for sure though.

=======
Other people out there are having similar problems according to some forums
I checked.

THE .NET FRAMEWORK 2.0 UPDATE IS BUGGY BECAUSE IT CAN HANG.
--
Rich Harris
Senior Systems and Programming Analyst
Santa Barbara county APCD


"Rich Harris" wrote:

> Error Code 0x800706BE via KB922770 Security Update .NET framework 2.0
>
> Update history show the above. Trying to install the update hangs microsoft
> update so hard it won't cancel, stop, be killed, allow a log-off or shutdown.
> Anyone else had the problem or a solution?
> --
> Rich Harris
> Senior Systems and Programming Analyst
> Santa Barbara county APCD