Windows Vista Tips

Windows Vista Tips > Newsgroups > Windows Vista General Discussion > Extender Config Error

Reply
Thread Tools Display Modes

Extender Config Error

 
 
nhorton79
Guest
Posts: n/a

 
      01-06-2009

Sorry if this is in the wrong place....

Oh well, here goes
I am currently having some issues with Xbox 360 and Media Center
Everytime I try to set up the 360 as an extender it comes up with th
Configuration Error
Here is a bit of a breakdown
I am able to see the 360 on my computer and I have recently reset m
DRM (in media player)which allowed me to see my computer from the xbox
I have run through the suggestions provided on most forums
1/ I have tried connecting by bypassing the router (direct connection
pc to 360) NO JOY
2/ Have confirmed no secondary MAC address. NO JOY
3/ Have tried to enable Filter Multicast on my router, but cannot fin
this, have looked through all the guides etc. and they mentioned IGM
Proxy and said to enable - so I enabled. Just to clarify - I have
DLink DSL-G604T modem running firmware version V3.00B02.NZ.2006071
4/ Have tried the suggestion of deleting the Xbox 360 Dashboard on th
360 under Memory>Hard Drive>Games. Unfortunately I can't see this fil
there and so wasn't able to delete it
5/ Not on a domain

I have checked under event viewer immediately after the error and
see
Type: Informatio
Source: Mcx2Pro
Event ID: 50
Event Info: Design started Windows Media Center Extender setup with th
following options: Firewall settings (0,0,1,1) Power management (0
Media settings (1
then
Type: Erro
Source: Media Center Guid
Event ID:
Event Info: ERROR: SqmApiWrapper.TimerRecord failed; Win32 GetLastErro
returned 10000105
Process: DefaultDomai
Object Name: Media Center Guid
then
Type: Erro
Source: Mcx2Dvc
Event ID: 40
Event Info: Windows Media Center Extender setup cannot configure th
Windows Media Center PC for use with the Extender. Error code: -114
Now I figured that this would be it and when I clicked for more inf
online it took me to the microsoft website where it told me that the 11
error was due to a corrupt certificate. This showed me how to find th
certificate using mmc (add/remove snapin) and delete it. Unfortunately
I didn;t have a certificate so I was unable to delete it
I have tried setting up using my friends 360 and this dfoesn't wor
either, so imagine it might be a Vista problem
Please, please, please someone help me before I go insane

--
nhorton7
Posted via http://www.vistaheads.co

 
Reply With Quote
 
 
 
 
James Matthews
Guest
Posts: n/a

 
      01-06-2009
You sometimes need to edit in config.ini files

--

http://www.astorandblack.com/
"nhorton79" <> wrote in message
news:...
>
> Sorry if this is in the wrong place.....
>
> Oh well, here goes:
> I am currently having some issues with Xbox 360 and Media Center.
> Everytime I try to set up the 360 as an extender it comes up with the
> Configuration Error.
> Here is a bit of a breakdown:
> I am able to see the 360 on my computer and I have recently reset my
> DRM (in media player)which allowed me to see my computer from the xbox.
> I have run through the suggestions provided on most forums:
> 1/ I have tried connecting by bypassing the router (direct connection -
> pc to 360) NO JOY!
> 2/ Have confirmed no secondary MAC address. NO JOY!
> 3/ Have tried to enable Filter Multicast on my router, but cannot find
> this, have looked through all the guides etc. and they mentioned IGMP
> Proxy and said to enable - so I enabled. Just to clarify - I have a
> DLink DSL-G604T modem running firmware version V3.00B02.NZ.20060711
> 4/ Have tried the suggestion of deleting the Xbox 360 Dashboard on the
> 360 under Memory>Hard Drive>Games. Unfortunately I can't see this file
> there and so wasn't able to delete it.
> 5/ Not on a domain.
>
> I have checked under event viewer immediately after the error and I
> see:
> Type: Information
> Source: Mcx2Prov
> Event ID: 501
> Event Info: Design started Windows Media Center Extender setup with the
> following options: Firewall settings (0,0,1,1) Power management (0)
> Media settings (1)
> then:
> Type: Error
> Source: Media Center Guide
> Event ID: 0
> Event Info: ERROR: SqmApiWrapper.TimerRecord failed; Win32 GetLastError
> returned 10000105
> Process: DefaultDomain
> Object Name: Media Center Guide
> then:
> Type: Error
> Source: Mcx2Dvcs
> Event ID: 401
> Event Info: Windows Media Center Extender setup cannot configure the
> Windows Media Center PC for use with the Extender. Error code: -114.
> Now I figured that this would be it and when I clicked for more info
> online it took me to the microsoft website where it told me that the 114
> error was due to a corrupt certificate. This showed me how to find the
> certificate using mmc (add/remove snapin) and delete it. Unfortunately,
> I didn;t have a certificate so I was unable to delete it.
> I have tried setting up using my friends 360 and this dfoesn't work
> either, so imagine it might be a Vista problem.
> Please, please, please someone help me before I go insane.
>
>
> --
> nhorton79
> Posted via http://www.vistaheads.com
>


 
Reply With Quote
 
nhorton79
Guest
Posts: n/a

 
      02-13-2009

Wow! I finally after six months have figured it out! After tryin
everything I decided to install a secondary copy of vista. I found
copy of home premium (won't mention where I got that from) and installe
it on my d drive and voila! I had been having problems with m
networking between computers also and this now fixed, found my extende
straight away first pop - no installing patches and resetting drm etc
it seems I must have had a dodgy version of vista. So now to get m
computer legitimately fixed as only 6 months old and bought it under th
assumption I would be able to use with the 360. So YaY

--
nhorton7
Posted via http://www.vistaheads.co

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ARC boot config error after updates ssitech Windows Vista General Discussion 3 01-10-2008 03:21 PM
Error 1310--Permissions to config.msi Sean Windows Vista General Discussion 0 09-23-2007 12:18 PM
Error message when editing config files Philn Windows Vista General Discussion 10 06-18-2007 04:42 PM
Config error with extender Edison Windows Vista General Discussion 0 03-26-2007 11:33 PM



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59