Windows Vista Tips

Windows Vista Tips > Newsgroups > Windows Update > Flash of blue screen and reboots after update

Reply
Thread Tools Display Modes

Flash of blue screen and reboots after update

 
 
chfields
Guest
Posts: n/a

 
      04-23-2005
I have SP2 and used automatic updates to update my system. When I installed
updates today and restarted computer, it will boot to the logo, blue bar goes
across about 4 times then goes to black screen and a few seconds later I get
a flash of the BSOD and computer reboots. I tried last known good config,
safe mode and still the same. Anything I can do short of repairing?? Don't
want to have to do this as I have windows installed on SATA WD Raptors in
Raid 0 and don't have floppy installed. Is this an issue with SATA drives as
my IDE does not have this problem.





 
Reply With Quote
 
 
 
 
CyrusT
Guest
Posts: n/a

 
      04-27-2005
I have this problem to. Do you know what error core you are getting ? I
posted this earlier "The system had been okay then windows downloaded a
service and it does
nothing but reboot. I reinstalled xp and things were good until updates
installed the same service pack. It does them in groups so I dont know which
one. I diabled restart on an error; and I get this message "c000021a {fatel
system error} session manager Initialization system process terminated
unexpectedly with a bus of 0xc000026c ( 0x00000000 0x00000000 ) system has
been shut down." I can not even load safe mode to do a system restore. Any
help ??

I have been able to do a repair once and the system will boot but it goes
bak to reboots when a certain service pack is installd. You can do that
though because you have to load your SATA drivers to do the repair and xp
asks for a floppy

"chfields" wrote:

> I have SP2 and used automatic updates to update my system. When I installed
> updates today and restarted computer, it will boot to the logo, blue bar goes
> across about 4 times then goes to black screen and a few seconds later I get
> a flash of the BSOD and computer reboots. I tried last known good config,
> safe mode and still the same. Anything I can do short of repairing?? Don't
> want to have to do this as I have windows installed on SATA WD Raptors in
> Raid 0 and don't have floppy installed. Is this an issue with SATA drives as
> my IDE does not have this problem.
>
>
>
>
>

 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: Blue screen after win update PA Bear [MS MVP] Windows Vista Installation 2 12-07-2008 06:53 PM
BCCode:1000008e blue screen of death during shut down and then it reboots david Windows Vista General Discussion 3 08-28-2007 08:50 PM
nt 4 auto-update blue screen kb Windows Update 2 12-18-2003 12:31 PM
i get a blue screen when i try to update to windowsXP pepe Windows Update 1 12-01-2003 11:20 PM
Blue Screen after Update doug Windows Update 1 08-26-2003 08:16 PM



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59