Halo 2 driver problems

I have a sli enabled motherboard and 2 ge force 7900 bfg video cards, and I
cannot get halo 2 to run exept extremely slowly, and it stutters all through
the game.

I am at a loss for what to do.

running a intel 1.86 duo core processor, and halo just will not run at all.

Microsoft, are you Listening?

Need more info...

How much RAM onboard?
How much free hard drive space?
Latest drivers for..... graphics, sound, motherboard utilities etc etc?
What else have you got running at the same time...... ?
--
Cari (MS-MVP)
Windows Technologies - Printing & Imaging
http://www.coribright.com/windows

"marshall D." <marshall D.@discussions.microsoft.com> wrote in message
news:1FD38E3B-EF30-4FA8-8FDB-...
>I have a sli enabled motherboard and 2 ge force 7900 bfg video cards, and I
> cannot get halo 2 to run exept extremely slowly, and it stutters all
> through
> the game.
>
> I am at a loss for what to do.
>
> running a intel 1.86 duo core processor, and halo just will not run at
> all.
>
> Microsoft, are you Listening?

Cari (MS-MVP) wrote:
> Need more info...
>
> How much RAM onboard?
> How much free hard drive space?
> Latest drivers for..... graphics, sound, motherboard utilities etc etc?
> What else have you got running at the same time...... ?


If SLI mode is enabled on here under Vista it all goes to hell and I
have a similar setup... under XP Pro it works as it should although SLI
seems more a device for selling video cards than anything pertaining to
graphical performance

I suspect the OP's problem is drivers + SLI mode together.

I just have to comment on the previous MVPs questions ....
How much RAM? How much free disk space? Why didn't you ask what color the
case was? Or how much his whole PC weighed?

He names his mother board and has an SLI configuration - he doesnt need to
be asked about memory or hard disk space.

The entry requirements for MVP status seemed to be more about just posting
stupid unhelpful posts to news groups.

"Charlie Tame" <> wrote in message
news:...
> Cari (MS-MVP) wrote:
>> Need more info...
>>
>> How much RAM onboard?
>> How much free hard drive space?
>> Latest drivers for..... graphics, sound, motherboard utilities etc etc?
>> What else have you got running at the same time...... ?
>
>
> If SLI mode is enabled on here under Vista it all goes to hell and I have
> a similar setup... under XP Pro it works as it should although SLI seems
> more a device for selling video cards than anything pertaining to
> graphical performance
>
> I suspect the OP's problem is drivers + SLI mode together.

"Mike Partain" <> wrote in message
news:...
>I just have to comment on the previous MVPs questions ....
> How much RAM? How much free disk space? Why didn't you ask what color the
> case was? Or how much his whole PC weighed?
>
> He names his mother board and has an SLI configuration - he doesnt need to
> be asked about memory or hard disk space.
>
> The entry requirements for MVP status seemed to be more about just posting
> stupid unhelpful posts to news groups.
Nothing worse, I agree..

Well except maybe for people who post complaints about useless messages only
neglecting to post anything useful in their own messages.

Glass Houses bud...

Marshall, SLI mode is warnky (buggy) in Vista. Try dropping a card, and yes
I agree, SLI is pretty much a bragging right now a days, or it could be
considered a cheap way to upgrade your video card, like for instance I have
a 7900 gt that I was thinking of slapping another one in there since they
are realitively cheap now.

-A.


>> If SLI mode is enabled on here under Vista it all goes to hell and I have
>> a similar setup... under XP Pro it works as it should although SLI seems
>> more a device for selling video cards than anything pertaining to
>> graphical performance
>>
>> I suspect the OP's problem is drivers + SLI mode together.
>

Some dual GPU (SLI/Crossfire) fixes were done recently to the Winodws Vista
OS, and some recent driver updates have been made by graphics vendors as
well. Make sure you have all the latest drivers and Windows Updates.

Of course there could be a lot of other things causing performance problems,
which is why MVPs ask for more detail about your system.

--
Chuck Walbourn
SDE, XNA Developer Connection

This posting is provided "AS IS" with no warranties, and confers no rights.

"Chuck Walbourn [MSFT]" <> wrote in message
news:4679b4a9$...
> Some dual GPU (SLI/Crossfire) fixes were done recently to the Winodws
> Vista OS, and some recent driver updates have been made by graphics
> vendors as well. Make sure you have all the latest drivers and Windows
> Updates.
>
> Of course there could be a lot of other things causing performance
> problems, which is why MVPs ask for more detail about your system.

Yes, I "used to" do support, if we got an email like, "Help, game no
workie." we always asked for everything including their make of kitchen
sink.

Might not use all the info, but if you need help, what's the harm in
answering? Saves time.

A.

Dear andy,

I have got problems with Halo 2 on Vista too. As the game starts within 5
mins my monitor goes blank and the LED of my monitor keeps blinking...But my
CPU is still on and running(i dont think my CPU got hanged or Crashed). I
then need to restart my Pc. The same problem repeats when the game starts
again!..Any Help here Andyl????

i recently added a new Nvidia Geforce 8600GTS grapic card.....(U think this
doesnt support the game)
my pc config is Dual Core 3.0ghz/Intel 945GNTL motherboard/2gb Ram/320Gb
Hard Disk/and the new Graphic Card i added.

Pls help me out..i am confused what the problem is!!!

best regards,
Sid.


"Andy" wrote:

> "Chuck Walbourn [MSFT]" <> wrote in message
> news:4679b4a9$...
> > Some dual GPU (SLI/Crossfire) fixes were done recently to the Winodws
> > Vista OS, and some recent driver updates have been made by graphics
> > vendors as well. Make sure you have all the latest drivers and Windows
> > Updates.
> >
> > Of course there could be a lot of other things causing performance
> > problems, which is why MVPs ask for more detail about your system.
>
> Yes, I "used to" do support, if we got an email like, "Help, game no
> workie." we always asked for everything including their make of kitchen
> sink.
>
> Might not use all the info, but if you need help, what's the harm in
> answering? Saves time.
>
> A.
>

Sid,
one thing that sounds screwy but you might try. When the screen goes blank,
try turning the monitor off and back on again. I don't know why but I
occasionally had to do that during Halo 2 play. I'm guessing the screensaver
settings kicked in somehow and then got confused.

Mark



"Sid.Legend" <> wrote in message
news:7EDAA064-5754-4A55-96D2-...
> Dear andy,
>
> I have got problems with Halo 2 on Vista too. As the game starts within 5
> mins my monitor goes blank and the LED of my monitor keeps blinking...But
> my
> CPU is still on and running(i dont think my CPU got hanged or Crashed). I
> then need to restart my Pc. The same problem repeats when the game starts
> again!..Any Help here Andyl????
>
> i recently added a new Nvidia Geforce 8600GTS grapic card.....(U think
> this
> doesnt support the game)
> my pc config is Dual Core 3.0ghz/Intel 945GNTL motherboard/2gb Ram/320Gb
> Hard Disk/and the new Graphic Card i added.
>
> Pls help me out..i am confused what the problem is!!!
>
> best regards,
> Sid.

"Sid.Legend" <> wrote in message
news:7EDAA064-5754-4A55-96D2-...
> Dear andy,
>
> I have got problems with Halo 2 on Vista too. As the game starts within 5
> mins my monitor goes blank and the LED of my monitor keeps blinking...But
> my
> CPU is still on and running(i dont think my CPU got hanged or Crashed). I
> then need to restart my Pc. The same problem repeats when the game starts
> again!..Any Help here Andyl????
>
> i recently added a new Nvidia Geforce 8600GTS grapic card.....(U think
> this
> doesnt support the game)
> my pc config is Dual Core 3.0ghz/Intel 945GNTL motherboard/2gb Ram/320Gb
> Hard Disk/and the new Graphic Card i added.
>
> Pls help me out..i am confused what the problem is!!!
>
> best regards,
> Sid.

Hey Sid,

If your monitor is "going blank" and the LED starts blinking that's usually
because your video card is sending a signal to your monitor that it doesn't
like.

If you own a really old computer monitor that could be the problem. Halo may
be trying to startup in 1280x1024 @ 75Hz and your monitor doesn't support
that mode.

Try this.
Right-Click on your desktop and choose Personalize from the menu that comes
up.
From the window that comes up, click on Display Settings (Last option in the
list)

In the middle of this window it should say something like:

(Name of Monitor) on (Video Card Type)

For example, my computer at work says, "Dell 1907FP(Digital) on NVIDIA
GeForce 7300 LE"

If your system says something like, "(Default) on NVIDIA GeForce 8600 GTS"
It could be that your monitor is not Plug n Play compatible. When Vista
starts up it checks your monitor to find out what resolutions it supports,
if your monitor isn't turned on when you startup Vista, it might not get
this information.

Solutuion is to reboot your computer. Make sure your monitor is turned on
and plugged directly into your video card (don't use a Keyboard, Video,
Mouse switch (KVM)) when you reboot. Check that screen again and see if your
computer monitor is listed now. If it is, try Halo 2 again.

Not sure if there's a way outside of Halo 2 to tell it to startup in a lower
resolution. I'm at the office right now and I don't have Halo 2 in front of
me. Maybe someone else can chime in. I think Halo is starting in a
resolution that your monitor can't handle. That's not saying it won't work
with your monitor, you just have to force Halo to start in another mode.

When you start the game, try pressing ALT+ENTER (Hold Alt, tap Enter), that
might switch the game to windowed mode and get you in so you can at least
play around.

Good luck,
Andy