helllllllllp pleasssssssseeeeeeee

Hi Leo, let me start this nightmare story i had just done a fresh
restalled and spent hours on getting everything installed on pc all was
fine working perfectly untill that is i installed vista service pack 1
from windows updates the update process crashed halfway through so i had
the only option to restart my pc then came the blue screen of death and
it metioned if you have any new hardware installed make sure all drivers
are installed etc etc of course i know it wasnt hardware it was because
of me restating my pc half way threw the service pack 1 and the full
files not been installed threw the update process crashed was the reason
for the blue screen but the blue screen had notes advising me to clear
shadow memory in the bois and any other memory so i stupidly assumed
this was channel mapping and bank mapping and put them all to zero
please see jpeg of what i changed i basically disabled everything that
was enabled and put all the mapping channels and bank channels to zero
and now when i switch on my laptop i get a blank screen with no post no
beeps and no bios no f1 or f2 or f10 keys access none just the cpu fan
spinning so my question is have i really messed up my bios or can it be
fixed all i get is a black screen no beeps and the cpu fan just spinning
and all three lights on power this is on a laptop now have i stupidly
corrupted my bios myself and can it be fixed also how do i get windows
working normally again i can not use safe mode or last good
configuration or any option when you hit f8 because it just goes back to
the blue screen of death and even can not use recovery console to start
fresh same blue screen please help i dont even know how to get my
operating system back as i have no cd it is oem version came with
computer please advise thanks but first neecd to get to bios without
that i wont even get to the blue screen part please help


--
kamy

"kamy" wrote:

>
> Hi Leo, let me start this nightmare story i had just done a fresh
> restalled and spent hours on getting everything installed on pc all was
> fine working perfectly untill that is i installed vista service pack 1
> from windows updates the update process crashed halfway through so i had
> the only option to restart my pc then came the blue screen of death and
> it metioned if you have any new hardware installed make sure all drivers
> are installed etc etc of course i know it wasnt hardware it was because
> of me restating my pc half way threw the service pack 1 and the full
> files not been installed threw the update process crashed was the reason
> for the blue screen but the blue screen had notes advising me to clear
> shadow memory in the bois and any other memory so i stupidly assumed
> this was channel mapping and bank mapping and put them all to zero
> please see jpeg of what i changed i basically disabled everything that
> was enabled and put all the mapping channels and bank channels to zero
> and now when i switch on my laptop i get a blank screen with no post no
> beeps and no bios no f1 or f2 or f10 keys access none just the cpu fan
> spinning so my question is have i really messed up my bios or can it be
> fixed all i get is a black screen no beeps and the cpu fan just spinning
> and all three lights on power this is on a laptop now have i stupidly
> corrupted my bios myself and can it be fixed also how do i get windows
> working normally again i can not use safe mode or last good
> configuration or any option when you hit f8 because it just goes back to
> the blue screen of death and even can not use recovery console to start
> fresh same blue screen please help i dont even know how to get my
> operating system back as i have no cd it is oem version came with
> computer please advise thanks but first neecd to get to bios without
> that i wont even get to the blue screen part please help
>
>
> --
> kamy
>

First, learn how to compose a real sentence with real punctuation, instead
of one strung out paragraph. Second, you said you just spent hours
reinstalling your operating system, then later you said you don't know how to
get your operating system back because you dont have the CD. So, how did you
acomplish the former when you don't have the latter? From a recovery
partition? If that's the case, just do a recovery like you did before. This
time, install the drivers first, then install SP1 and SP2 BEFORE you put on
any of your applications.

Mark Adams;1077970 Wrote:
> "kamy" wrote:
> > > >
> > >
> > > Hi Leo, let me start this nightmare story i had just done a fresh
> > > restalled and spent hours on getting everything installed on pc all
> > was
> > > fine working perfectly untill that is i installed vista service pack
> > 1
> > > from windows updates the update process crashed halfway through so i
> > had
> > > the only option to restart my pc then came the blue screen of death
> > and
> > > it metioned if you have any new hardware installed make sure all
> > drivers
> > > are installed etc etc of course i know it wasnt hardware it was
> > because
> > > of me restating my pc half way threw the service pack 1 and the full
> > > files not been installed threw the update process crashed was the
> > reason
> > > for the blue screen but the blue screen had notes advising me to
> > clear
> > > shadow memory in the bois and any other memory so i stupidly assumed
> > > this was channel mapping and bank mapping and put them all to zero
> > > please see jpeg of what i changed i basically disabled everything
> > that
> > > was enabled and put all the mapping channels and bank channels to
> > zero
> > > and now when i switch on my laptop i get a blank screen with no post
> > no
> > > beeps and no bios no f1 or f2 or f10 keys access none just the cpu
> > fan
> > > spinning so my question is have i really messed up my bios or can it
> > be
> > > fixed all i get is a black screen no beeps and the cpu fan just
> > spinning
> > > and all three lights on power this is on a laptop now have i stupidly
> > > corrupted my bios myself and can it be fixed also how do i get
> > windows
> > > working normally again i can not use safe mode or last good
> > > configuration or any option when you hit f8 because it just goes back
> > to
> > > the blue screen of death and even can not use recovery console to
> > start
> > > fresh same blue screen please help i dont even know how to get my
> > > operating system back as i have no cd it is oem version came with
> > > computer please advise thanks but first neecd to get to bios without
> > > that i wont even get to the blue screen part please help
> > >
> > >
> > > --
> > > kamy
> > > > > First, learn how to compose a real sentence with real punctuation,
> instead
> of one strung out paragraph. Second, you said you just spent hours
> reinstalling your operating system, then later you said you don't
> know how to
> get your operating system back because you dont have the CD. So, how
> did you
> acomplish the former when you don't have the latter? From a recovery
> partition? If that's the case, just do a recovery like you did
> before. This
> time, install the drivers first, then install SP1 and SP2 BEFORE you
> put on
> any of your applications.

Thats the problem even recovery console i can not get into and can i
ask how can i even begin recovery when there is no bios did you not read
my post??????? properly? or did you just want to have a moan about my
punctuation why are you so worried about my punctuation dont bother
replying to my post if you want to be no help and talk about punctuation
dude


--
kamy

In article <>,
kamy <> wrote:
>
>
>Hi Leo, let me start this nightmare story i had just done a fresh

Ok, look, start by removing the power cord then taking out the
battery and waiting 15 minutes. Replace the battery and power cord
and turn it on. That will almost certainly get you to at least BIOS.

In article <3EE4510E-E672-4F77-865D->,
Mark Adams <> wrote:
>
>First, learn how to compose a real sentence with real punctuation, instead

Oh, great Ghu, are you an English teacher or a Windows geek?

kamy wrote:

> Thats the problem even recovery console i can not get into and can i
> ask how can i even begin recovery when there is no bios did you not read
> my post??????? properly? or did you just want to have a moan about my
> punctuation why are you so worried about my punctuation dont bother
> replying to my post if you want to be no help and talk about punctuation
> dude
>

Actually dude - your post was unreadable. The onus is on *you* to make
yourself understood to the people who are *volunteering* their time to help
you. I'm not saying this to hurt your feelings. You're the one who wants
help and I'm just telling you how to get it. If you can't be bothered to
communicate clearly, then take the machine to a competent local computer
tech and pay for the help.

http://www.elephantboycomputers.com/page2.html#Usenet
http://support.microsoft.com/default.aspx/kb/555375 - How to Ask a Question
http://users.tpg.com.au/bzyhjr/liszt.htm - How Not to Get Technical Help on
Usenet
http://www.catb.org/~esr/faqs/smart-questions.html

If you are trying to do a clean install of Windows, either follow the
directions at this link OR if you have an OEM machine (HP, eMachines, etc.)
with a recovery image on a special partition refer to your computer manual
or the computer mftr.'s tech support for how to restore your computer to
factory condition.

How to install Windows Vista - covers upgrade and clean install -
http://support.microsoft.com/kb/918884

Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
http://www.elephantboycomputers.com/#FAQ

"kamy" <> wrote in message
news:...
>
> Mark Adams;1077970 Wrote:
>> "kamy" wrote:
>> > > >
>> > >
>> > > Hi Leo, let me start this nightmare story i had just done a fresh
>> > > restalled and spent hours on getting everything installed on pc all
>> > was
>> > > fine working perfectly untill that is i installed vista service pack
>> > 1
>> > > from windows updates the update process crashed halfway through so i
>> > had
>> > > the only option to restart my pc then came the blue screen of death
>> > and
>> > > it metioned if you have any new hardware installed make sure all
>> > drivers
>> > > are installed etc etc of course i know it wasnt hardware it was
>> > because
>> > > of me restating my pc half way threw the service pack 1 and the full
>> > > files not been installed threw the update process crashed was the
>> > reason
>> > > for the blue screen but the blue screen had notes advising me to
>> > clear
>> > > shadow memory in the bois and any other memory so i stupidly assumed
>> > > this was channel mapping and bank mapping and put them all to zero
>> > > please see jpeg of what i changed i basically disabled everything
>> > that
>> > > was enabled and put all the mapping channels and bank channels to
>> > zero
>> > > and now when i switch on my laptop i get a blank screen with no post
>> > no
>> > > beeps and no bios no f1 or f2 or f10 keys access none just the cpu
>> > fan
>> > > spinning so my question is have i really messed up my bios or can it
>> > be
>> > > fixed all i get is a black screen no beeps and the cpu fan just
>> > spinning
>> > > and all three lights on power this is on a laptop now have i stupidly
>> > > corrupted my bios myself and can it be fixed also how do i get
>> > windows
>> > > working normally again i can not use safe mode or last good
>> > > configuration or any option when you hit f8 because it just goes back
>> > to
>> > > the blue screen of death and even can not use recovery console to
>> > start
>> > > fresh same blue screen please help i dont even know how to get my
>> > > operating system back as i have no cd it is oem version came with
>> > > computer please advise thanks but first neecd to get to bios without
>> > > that i wont even get to the blue screen part please help
>> > >
>> > >
>> > > --
>> > > kamy
>> > > > > First, learn how to compose a real sentence with real
>> > > > > punctuation,
>> instead
>> of one strung out paragraph. Second, you said you just spent hours
>> reinstalling your operating system, then later you said you don't
>> know how to
>> get your operating system back because you dont have the CD. So, how
>> did you
>> acomplish the former when you don't have the latter? From a recovery
>> partition? If that's the case, just do a recovery like you did
>> before. This
>> time, install the drivers first, then install SP1 and SP2 BEFORE you
>> put on
>> any of your applications.
>
> Thats the problem even recovery console i can not get into and can i
> ask how can i even begin recovery when there is no bios did you not read
> my post??????? properly? or did you just want to have a moan about my
> punctuation why are you so worried about my punctuation dont bother
> replying to my post if you want to be no help and talk about punctuation
> dude

For a guy needing help you are quite feisty.
You have to be precise when expecting help, not 'big-breasted'.

Harry.

>
>
> --
> kamy

Dude

Your post had to be copied and pasted into WordPad, at which point I read it
over and again until I had the various topics in paragraphs of their own.

There is no attachment, so can't see what you disabled, but you may have
turned memory off completely.

End result without memory = no computer..

Resolution = return to manufacturer and then pay gracefully when told that
it is fixed..


--

Mike Hall - MVP Windows Experience
http://msmvps.com/blogs/mikehall/

webster72n;1078003 Wrote:
> "kamy" <> wrote in message
> news:...> > >
> > >
> > > Mark Adams;1077970 Wrote:> > > > >
> > > >> "kamy" wrote:
> > > >> instead
> > > >> of one strung out paragraph. Second, you said you just spent hours
> > > >> reinstalling your operating system, then later you said you don't
> > > >> know how to
> > > >> get your operating system back because you dont have the CD. So, how
> > > >> did you
> > > >> acomplish the former when you don't have the latter? From a recovery
> > > >> partition? If that's the case, just do a recovery like you did
> > > >> before. This
> > > >> time, install the drivers first, then install SP1 and SP2 BEFORE you
> > > >> put on
> > > >> any of your applications.> > > > >
> > > Thats the problem even recovery console i can not get into and
> > can i
> > > ask how can i even begin recovery when there is no bios did you
> > not read
> > > my post??????? properly? or did you just want to have a moan
> > about my
> > > punctuation why are you so worried about my punctuation dont
> > bother
> > > replying to my post if you want to be no help and talk about
> > punctuation
> > > dude > > For a guy needing help you are quite feisty.
> You have to be precise when expecting help, not 'big-breasted'.
>
> Harry.
> > > >
> > >
> > >
> > > --
> > > kamy > >

you guys are plain rude this is not the only forum in the world dude
actually im gladly leaving mate


--
kamy

Your post was pretty much un-readable. I, for one, didn't even try!

--

Richard Urban
Microsoft MVP
Windows Desktop Experience


"kamy" <> wrote in message
news:...
>
> Mark Adams;1077970 Wrote:
>> "kamy" wrote:
>> > > >
>> > >
>> > > Hi Leo, let me start this nightmare story i had just done a fresh
>> > > restalled and spent hours on getting everything installed on pc all
>> > was
>> > > fine working perfectly untill that is i installed vista service pack
>> > 1
>> > > from windows updates the update process crashed halfway through so i
>> > had
>> > > the only option to restart my pc then came the blue screen of death
>> > and
>> > > it metioned if you have any new hardware installed make sure all
>> > drivers
>> > > are installed etc etc of course i know it wasnt hardware it was
>> > because
>> > > of me restating my pc half way threw the service pack 1 and the full
>> > > files not been installed threw the update process crashed was the
>> > reason
>> > > for the blue screen but the blue screen had notes advising me to
>> > clear
>> > > shadow memory in the bois and any other memory so i stupidly assumed
>> > > this was channel mapping and bank mapping and put them all to zero
>> > > please see jpeg of what i changed i basically disabled everything
>> > that
>> > > was enabled and put all the mapping channels and bank channels to
>> > zero
>> > > and now when i switch on my laptop i get a blank screen with no post
>> > no
>> > > beeps and no bios no f1 or f2 or f10 keys access none just the cpu
>> > fan
>> > > spinning so my question is have i really messed up my bios or can it
>> > be
>> > > fixed all i get is a black screen no beeps and the cpu fan just
>> > spinning
>> > > and all three lights on power this is on a laptop now have i stupidly
>> > > corrupted my bios myself and can it be fixed also how do i get
>> > windows
>> > > working normally again i can not use safe mode or last good
>> > > configuration or any option when you hit f8 because it just goes back
>> > to
>> > > the blue screen of death and even can not use recovery console to
>> > start
>> > > fresh same blue screen please help i dont even know how to get my
>> > > operating system back as i have no cd it is oem version came with
>> > > computer please advise thanks but first neecd to get to bios without
>> > > that i wont even get to the blue screen part please help
>> > >
>> > >
>> > > --
>> > > kamy
>> > > > > First, learn how to compose a real sentence with real
>> > > > > punctuation,
>> instead
>> of one strung out paragraph. Second, you said you just spent hours
>> reinstalling your operating system, then later you said you don't
>> know how to
>> get your operating system back because you dont have the CD. So, how
>> did you
>> acomplish the former when you don't have the latter? From a recovery
>> partition? If that's the case, just do a recovery like you did
>> before. This
>> time, install the drivers first, then install SP1 and SP2 BEFORE you
>> put on
>> any of your applications.
>
> Thats the problem even recovery console i can not get into and can i
> ask how can i even begin recovery when there is no bios did you not read
> my post??????? properly? or did you just want to have a moan about my
> punctuation why are you so worried about my punctuation dont bother
> replying to my post if you want to be no help and talk about punctuation
> dude
>
>
> --
> kamy