KB911562 installation fails - Error Code 0x8007F0DA

Using Windows 2000 Professional. I confirmed that I have MDAC ver 2.8.1022.0
so I downloaded the file MDAC28-KB911562-x86-ENU.exe after original
installation failed. When running that, it states that "Product Version
Check: Failed, click here for details." Details state: "Update could not
identify the installed product version. The installation may be damaged."
Finally I get an error message in a window titled "KB911562 Setup Error" that
states, "KB911562 installation did not complete". What should I try next?
Thank you.

Brad,

Did you use the Component Checker tool to confirm the correct version ?
http://support.microsoft.com/kb/301202

There's a link to it on this page :
MDAC Downloads
http://msdn.microsoft.com/data/mdac/...s/default.aspx

MowGreen [MVP 2003-2006]
===============
*-343-* FDNY
Never Forgotten
===============


Brad wrote:

> Using Windows 2000 Professional. I confirmed that I have MDAC ver 2.8.1022.0
> so I downloaded the file MDAC28-KB911562-x86-ENU.exe after original
> installation failed. When running that, it states that "Product Version
> Check: Failed, click here for details." Details state: "Update could not
> identify the installed product version. The installation may be damaged."
> Finally I get an error message in a window titled "KB911562 Setup Error" that
> states, "KB911562 installation did not complete". What should I try next?
> Thank you.

I just ran that program and the results are "MDAC 2.8 RTM".

Also, I forgot to mention that I do have Windows 2000 Service Pack 4
installed.

Any more thoughts?

Thanks
Brad

"MowGreen [MVP]" wrote:

> Brad,
>
> Did you use the Component Checker tool to confirm the correct version ?
> http://support.microsoft.com/kb/301202
>
> There's a link to it on this page :
> MDAC Downloads
> http://msdn.microsoft.com/data/mdac/...s/default.aspx
>
> MowGreen [MVP 2003-2006]
> ===============
> *-343-* FDNY
> Never Forgotten
> ===============
>
>
> Brad wrote:
>
> > Using Windows 2000 Professional. I confirmed that I have MDAC ver 2.8.1022.0
> > so I downloaded the file MDAC28-KB911562-x86-ENU.exe after original
> > installation failed. When running that, it states that "Product Version
> > Check: Failed, click here for details." Details state: "Update could not
> > identify the installed product version. The installation may be damaged."
> > Finally I get an error message in a window titled "KB911562 Setup Error" that
> > states, "KB911562 installation did not complete". What should I try next?
> > Thank you.
>

I have got exactly the same problem here (Windows 2000 SP4 machine)!

"Brad" wrote:

> I just ran that program and the results are "MDAC 2.8 RTM".
>
> Also, I forgot to mention that I do have Windows 2000 Service Pack 4
> installed.
>
> Any more thoughts?
>
> Thanks
> Brad
>
> "MowGreen [MVP]" wrote:
>
> > Brad,
> >
> > Did you use the Component Checker tool to confirm the correct version ?
> > http://support.microsoft.com/kb/301202
> >
> > There's a link to it on this page :
> > MDAC Downloads
> > http://msdn.microsoft.com/data/mdac/...s/default.aspx
> >
> > MowGreen [MVP 2003-2006]
> > ===============
> > *-343-* FDNY
> > Never Forgotten
> > ===============
> >
> >
> > Brad wrote:
> >
> > > Using Windows 2000 Professional. I confirmed that I have MDAC ver 2.8.1022.0
> > > so I downloaded the file MDAC28-KB911562-x86-ENU.exe after original
> > > installation failed. When running that, it states that "Product Version
> > > Check: Failed, click here for details." Details state: "Update could not
> > > identify the installed product version. The installation may be damaged."
> > > Finally I get an error message in a window titled "KB911562 Setup Error" that
> > > states, "KB911562 installation did not complete". What should I try next?
> > > Thank you.
> >

"Brad" <> wrote in message
news3F402C8-EE77-4E73-8747-...
> I just ran that program and the results are "MDAC 2.8 RTM".
>
> Also, I forgot to mention that I do have Windows 2000 Service Pack 4
> installed.
>
> Any more thoughts?
>
> Thanks
> Brad

I have got exactly the same problem here :-(

I too am having the same problem and have tried the fixes mentioned above.

I got it, I found that I needed the windows 2000 service pack 4 with
microsoft data access components 2.8 SERVICE PACK 1 INSTALLED
The service pack 1 was the kicker.
Here is the link to the download:
http://www.ciac.org/ciac/bulletins/q-171.shtml


"stickweldnow" wrote:

> I too am having the same problem and have tried the fixes mentioned above.

Well now I tried to update my laptop and no luck...it has 2.5 sp3 and nothing
is working...this blows big chunks.

"stickweldnow" wrote:

> I got it, I found that I needed the windows 2000 service pack 4 with
> microsoft data access components 2.8 SERVICE PACK 1 INSTALLED
> The service pack 1 was the kicker.
> Here is the link to the download:
> http://www.ciac.org/ciac/bulletins/q-171.shtml
>
>
> "stickweldnow" wrote:
>
> > I too am having the same problem and have tried the fixes mentioned above.

"stickweldnow" <> wrote in message
news:5A0A99B4-897E-4611-A0B1-...
> Well now I tried to update my laptop and no luck...it has 2.5 sp3 and
nothing
> is working...this blows big chunks.

Same here, although I tried to install the security update that is
especially got the MDAC 2.5 sp3 version... So what I did is: I upgraded to
MDAC 2.8 SP1 first. Then the MDAC security update installed correctly. It is
a workaround though ;-)

Strangely, the MDAC version checker now says I am running a Windows XP SP2
system instead of a Windows 2000 SP4 system!!

Would it have to do with:
"Microsoft strongly recommends that all customers who currently use a
version of Windows that does not have Microsoft Data Access Components 2.7
Service Pack 1 or higher upgrade immediately to Microsoft Data Access
Components 2.8 Service Pack 1 or another supported version. The only
EXCEPTION to this notice is customers who currently use Windows 2000 Service
Pack 4 running Microsoft Data Access Components 2.5 Service Pack 3. See
Knowledge Base Article 915387 for more information."?

Does this mean you are "not strongly recommended to do this" on a W2000 SP4
system, or that you "should not do this" on a W2000 SP4 system?"

I saw a solution suggested in another thread to upgrade the 2.8 RTM to 2.81
(2.8 SP 1). I did that, then ran Windows Update again and voila, the
installation succeeded. Hope this helps.

Brad

"Ano" wrote:

> "Brad" <> wrote in message
> news3F402C8-EE77-4E73-8747-...
> > I just ran that program and the results are "MDAC 2.8 RTM".
> >
> > Also, I forgot to mention that I do have Windows 2000 Service Pack 4
> > installed.
> >
> > Any more thoughts?
> >
> > Thanks
> > Brad
>
> I have got exactly the same problem here :-(
>
>
>