KB932471

Any ideas?

Event Viewer:
Installation Failure: Windows failed to install the following update with
error 0x80070643: Update for .NET Framework 3.0: x86 (KB932471).


WindowsUpdate.Log:
2008-07-16 08:03:28:550 1244 b8 AU #############
2008-07-16 08:03:28:550 1244 b8 AU ## START ## AU: Install updates
2008-07-16 08:03:28:550 1244 b8 AU #########
2008-07-16 08:03:28:550 1244 b8 AU # Initiating deadline install
2008-07-16 08:03:28:550 1244 b8 AU # Approved updates = 1
2008-07-16 08:03:28:550 1244 b8 AU <<## SUBMITTED ## AU: Install updates /
installing updates [CallId = {13B69390-8150-427C-ADBA-6F610FC04504}]
2008-07-16 08:03:28:550 1244 984 Agent *************
2008-07-16 08:03:28:550 1244 984 Agent ** START ** Agent: Installing
updates [CallerId = AutomaticUpdates]
2008-07-16 08:03:28:550 1244 984 Agent *********
2008-07-16 08:03:28:550 1244 984 Agent * Updates to install = 1
2008-07-16 08:03:28:566 1244 984 Agent * Title = Update for .NET
Framework 3.0: x86 (KB932471)
2008-07-16 08:03:28:566 1244 984 Agent * UpdateId =
{60B5D7CF-F273-47DC-83AB-0679B1DFF42C}.102
2008-07-16 08:03:28:566 1244 984 Agent * Bundles 1 updates:
2008-07-16 08:03:28:566 1244 984 Agent *
{57628421-F03D-4324-8004-09E257363D45}.102
2008-07-16 08:03:33:580 1244 858 Report REPORT EVENT:
{7BE88842-642A-4B8A-82D2-74E91E88EC9C} 2008-07-16 08:03:28:388+1000 1 147
101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success
Software Synchronization Windows Update Client successfully detected 1
updates.
2008-07-16 08:03:33:580 1244 858 Report REPORT EVENT:
{8D8A28DA-43A4-4468-87B6-294B0BD1A5F4} 2008-07-16 08:03:28:404+1000 1 156
101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success
Pre-Deployment Check Reporting client status.
2008-07-16 08:03:33:580 1244 858 Report REPORT EVENT:
{C46361C2-3377-4C9A-978A-474335F18CB3} 2008-07-16 08:03:28:534+1000 1 188
102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success
Content Install Installation Ready: The following updates are downloaded and
ready for installation. This computer is currently scheduled to install
these updates on Wednesday, 16 July 2008 at 8:03 AM: - Update for .NET
Framework 3.0: x86 (KB932471)
2008-07-16 08:04:51:147 1244 984 DnldMgr Preparing update for install,
updateId = {57628421-F03D-4324-8004-09E257363D45}.102.
2008-07-16 08:04:51:212 2476 9c4 Misc =========== Logging initialized
(build: 7.1.6001.65, tz: +1000) ===========
2008-07-16 08:04:51:212 2476 9c4 Misc = Process:
C:\WINDOWS\system32\wuauclt.exe
2008-07-16 08:04:51:212 2476 9c4 Misc = Module:
C:\WINDOWS\system32\wuaueng.dll
2008-07-16 08:04:51:212 2476 9c4 Handler :::::::::::::
2008-07-16 08:04:51:212 2476 9c4 Handler :: START :: Handler: Command Line
Install
2008-07-16 08:04:51:212 2476 9c4 Handler :::::::::
2008-07-16 08:04:51:212 2476 9c4 Handler : Updates to install = 1
2008-07-16 08:04:51:715 2476 9c4 Handler : WARNING: Command line install
completed. Return code = 0x0000066a, Result = Failed, Reboot required =
false
2008-07-16 08:04:51:715 2476 9c4 Handler : WARNING: Exit code = 0x8024200B
2008-07-16 08:04:51:715 1244 980 AU >>## RESUMED ## AU: Installing update
[UpdateId = {60B5D7CF-F273-47DC-83AB-0679B1DFF42C}]
2008-07-16 08:04:51:715 2476 9c4 Handler :::::::::
2008-07-16 08:04:51:715 1244 980 AU # WARNING: Install failed, error =
0x80070643 / 0x0000066A
2008-07-16 08:04:51:715 2476 9c4 Handler :: END :: Handler: Command Line
Install
2008-07-16 08:04:51:715 2476 9c4 Handler :::::::::::::
2008-07-16 08:04:51:894 1244 984 Agent *********
2008-07-16 08:04:51:894 1244 980 AU Install call completed.
2008-07-16 08:04:51:894 1244 984 Agent ** END ** Agent: Installing
updates [CallerId = AutomaticUpdates]
2008-07-16 08:04:51:894 1244 980 AU # WARNING: Install call completed,
reboot required = No, error = 0x00000000
2008-07-16 08:04:51:894 1244 984 Agent *************
2008-07-16 08:04:51:894 1244 980 AU #########
2008-07-16 08:04:51:894 1244 980 AU ## END ## AU: Installing updates
[CallId = {13B69390-8150-427C-ADBA-6F610FC04504}]

"Mike" <> wrote in message
news:%...
>
> Any ideas?
>
> Event Viewer:
> Installation Failure: Windows failed to install the following update with
> error 0x80070643: Update for .NET Framework 3.0: x86 (KB932471).

..NET Framework updates and service packs quite often fail when applications
are in use on a system.

> 2008-07-16 08:03:28:550 1244 b8 AU # Initiating deadline install

> 2008-07-16 08:04:51:715 2476 9c4 Handler : WARNING: Command line install
> completed. Return code = 0x0000066a, Result = Failed, Reboot required =
> false


I strongly recommend:
[a] Installing .NET Framework updates and service packs via scheduled
events when no user is logged on, or
[b] Installing .NET Framework updates and service packs from the console
when it's known for sure that no other Framework-based applications are in
use.

If the update fails in both of those scenarios, then you might have a
defective installer, or a defective installation of the applicable .NET
Framework.

It's also conceivable that the detection logic of the update is defective,
and the machine does not even have the .NET Framework v3.0 installed -- in
which case the update would also fail installation.


--
Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
Senior Data Architect, APQC, Houston, Texas
Microsoft MVP - Software Distribution (2005-2008)

MS WSUS Website: http://www.microsoft.com/wsus
My Websites: http://www.onsitechsolutions.com;
http://wsusinfo.onsitechsolutions.com
My MVP Profile: http://mvp.support.microsoft.com/pro...awrence.Garvin

Lawrence,

Update failed in both suggested scenarios. These machines have .NET 3.0 SP1
installed. (3.1.21022)



This particular update (KB932471) has failed on all 32 machines that WSUS
has tried to install it on. Manual install from TechNet CD also failed.



I'm posting here to decipher the error code the update is returning, rather
than generic reasons of failure.




"Lawrence Garvin" <> wrote in message
news:%...
> "Mike" <> wrote in message
> news:%...
>>
>> Any ideas?
>>
>> Event Viewer:
>> Installation Failure: Windows failed to install the following update with
>> error 0x80070643: Update for .NET Framework 3.0: x86 (KB932471).
>
> .NET Framework updates and service packs quite often fail when
> applications are in use on a system.
>
>> 2008-07-16 08:03:28:550 1244 b8 AU # Initiating deadline install
>
>> 2008-07-16 08:04:51:715 2476 9c4 Handler : WARNING: Command line
>> install completed. Return code = 0x0000066a, Result = Failed, Reboot
>> required = false
>
>
> I strongly recommend:
> [a] Installing .NET Framework updates and service packs via scheduled
> events when no user is logged on, or
> [b] Installing .NET Framework updates and service packs from the
> console when it's known for sure that no other Framework-based
> applications are in use.
>
> If the update fails in both of those scenarios, then you might have a
> defective installer, or a defective installation of the applicable .NET
> Framework.
>
> It's also conceivable that the detection logic of the update is defective,
> and the machine does not even have the .NET Framework v3.0 installed -- in
> which case the update would also fail installation.
>
>
> --
> Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
> Senior Data Architect, APQC, Houston, Texas
> Microsoft MVP - Software Distribution (2005-2008)
>
> MS WSUS Website: http://www.microsoft.com/wsus
> My Websites: http://www.onsitechsolutions.com;
> http://wsusinfo.onsitechsolutions.com
> My MVP Profile: http://mvp.support.microsoft.com/pro...awrence.Garvin
>

It's been a couple of years and I do not recall the error number but when .net
3.0 SP1 failed on some of my systems I uninstalled 3.0 and re-installed it. Then
all the updates started to work.

On Wed, 16 Jul 2008 12:25:44 +1000, "Mike" <> wrote:

>
>Lawrence,
>
>Update failed in both suggested scenarios. These machines have .NET 3.0 SP1
>installed. (3.1.21022)
>
>
>
> This particular update (KB932471) has failed on all 32 machines that WSUS
>has tried to install it on. Manual install from TechNet CD also failed.
>
>
>
>I'm posting here to decipher the error code the update is returning, rather
>than generic reasons of failure.
>
>
>
>
>"Lawrence Garvin" <> wrote in message
>news:%...
>> "Mike" <> wrote in message
>> news:%...
>>>
>>> Any ideas?
>>>
>>> Event Viewer:
>>> Installation Failure: Windows failed to install the following update with
>>> error 0x80070643: Update for .NET Framework 3.0: x86 (KB932471).
>>
>> .NET Framework updates and service packs quite often fail when
>> applications are in use on a system.
>>
>>> 2008-07-16 08:03:28:550 1244 b8 AU # Initiating deadline install
>>
>>> 2008-07-16 08:04:51:715 2476 9c4 Handler : WARNING: Command line
>>> install completed. Return code = 0x0000066a, Result = Failed, Reboot
>>> required = false
>>
>>
>> I strongly recommend:
>> [a] Installing .NET Framework updates and service packs via scheduled
>> events when no user is logged on, or
>> [b] Installing .NET Framework updates and service packs from the
>> console when it's known for sure that no other Framework-based
>> applications are in use.
>>
>> If the update fails in both of those scenarios, then you might have a
>> defective installer, or a defective installation of the applicable .NET
>> Framework.
>>
>> It's also conceivable that the detection logic of the update is defective,
>> and the machine does not even have the .NET Framework v3.0 installed -- in
>> which case the update would also fail installation.
>>
>>
>> --
>> Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
>> Senior Data Architect, APQC, Houston, Texas
>> Microsoft MVP - Software Distribution (2005-2008)
>>
>> MS WSUS Website: http://www.microsoft.com/wsus
>> My Websites: http://www.onsitechsolutions.com;
>> http://wsusinfo.onsitechsolutions.com
>> My MVP Profile: http://mvp.support.microsoft.com/pro...awrence.Garvin
>>
>
--
Dave Mills
There are 10 type of people, those that understand binary and those that don't.

Tried that too -
Product: Microsoft .NET Framework 3.0 Service Pack 1 -- Microsoft .NET
Framework 3.0 Service Pack 1 cannot be uninstalled because it will affect
other applications that are installed. For more information, see
http://go.microsoft.com/fwlink/?LinkId=91126.

"DaveMills" <> wrote in message
news:...
> It's been a couple of years and I do not recall the error number but when
> .net
> 3.0 SP1 failed on some of my systems I uninstalled 3.0 and re-installed
> it. Then
> all the updates started to work.
>
> On Wed, 16 Jul 2008 12:25:44 +1000, "Mike" <> wrote:
>
>>
>>Lawrence,
>>
>>Update failed in both suggested scenarios. These machines have .NET 3.0
>>SP1
>>installed. (3.1.21022)
>>
>>
>>
>> This particular update (KB932471) has failed on all 32 machines that
>> WSUS
>>has tried to install it on. Manual install from TechNet CD also failed.
>>
>>
>>
>>I'm posting here to decipher the error code the update is returning,
>>rather
>>than generic reasons of failure.
>>
>>
>>
>>
>>"Lawrence Garvin" <> wrote in message
>>news:%.. .
>>> "Mike" <> wrote in message
>>> news:%...
>>>>
>>>> Any ideas?
>>>>
>>>> Event Viewer:
>>>> Installation Failure: Windows failed to install the following update
>>>> with
>>>> error 0x80070643: Update for .NET Framework 3.0: x86 (KB932471).
>>>
>>> .NET Framework updates and service packs quite often fail when
>>> applications are in use on a system.
>>>
>>>> 2008-07-16 08:03:28:550 1244 b8 AU # Initiating deadline install
>>>
>>>> 2008-07-16 08:04:51:715 2476 9c4 Handler : WARNING: Command line
>>>> install completed. Return code = 0x0000066a, Result = Failed, Reboot
>>>> required = false
>>>
>>>
>>> I strongly recommend:
>>> [a] Installing .NET Framework updates and service packs via scheduled
>>> events when no user is logged on, or
>>> [b] Installing .NET Framework updates and service packs from the
>>> console when it's known for sure that no other Framework-based
>>> applications are in use.
>>>
>>> If the update fails in both of those scenarios, then you might have a
>>> defective installer, or a defective installation of the applicable .NET
>>> Framework.
>>>
>>> It's also conceivable that the detection logic of the update is
>>> defective,
>>> and the machine does not even have the .NET Framework v3.0 installed --
>>> in
>>> which case the update would also fail installation.
>>>
>>>
>>> --
>>> Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
>>> Senior Data Architect, APQC, Houston, Texas
>>> Microsoft MVP - Software Distribution (2005-2008)
>>>
>>> MS WSUS Website: http://www.microsoft.com/wsus
>>> My Websites: http://www.onsitechsolutions.com;
>>> http://wsusinfo.onsitechsolutions.com
>>> My MVP Profile: http://mvp.support.microsoft.com/pro...awrence.Garvin
>>>
>>
> --
> Dave Mills
> There are 10 type of people, those that understand binary and those that
> don't.

KB932471 is included in .NET 3.0 SP1.
http://support.microsoft.com/kb/945826

Yet WSUS tries to install it. (on 30+ machines. ) Obviosly some incorrect
detection logic in WSUS.




"Mike" <> wrote in message
news:#...
>
> Any ideas?
>
> Event Viewer:
> Installation Failure: Windows failed to install the following update with
> error 0x80070643: Update for .NET Framework 3.0: x86 (KB932471).
>
>
> WindowsUpdate.Log:
> 2008-07-16 08:03:28:550 1244 b8 AU #############
> 2008-07-16 08:03:28:550 1244 b8 AU ## START ## AU: Install updates
> 2008-07-16 08:03:28:550 1244 b8 AU #########
> 2008-07-16 08:03:28:550 1244 b8 AU # Initiating deadline install
> 2008-07-16 08:03:28:550 1244 b8 AU # Approved updates = 1
> 2008-07-16 08:03:28:550 1244 b8 AU <<## SUBMITTED ## AU: Install updates
> / installing updates [CallId = {13B69390-8150-427C-ADBA-6F610FC04504}]
> 2008-07-16 08:03:28:550 1244 984 Agent *************
> 2008-07-16 08:03:28:550 1244 984 Agent ** START ** Agent: Installing
> updates [CallerId = AutomaticUpdates]
> 2008-07-16 08:03:28:550 1244 984 Agent *********
> 2008-07-16 08:03:28:550 1244 984 Agent * Updates to install = 1
> 2008-07-16 08:03:28:566 1244 984 Agent * Title = Update for .NET
> Framework 3.0: x86 (KB932471)
> 2008-07-16 08:03:28:566 1244 984 Agent * UpdateId =
> {60B5D7CF-F273-47DC-83AB-0679B1DFF42C}.102
> 2008-07-16 08:03:28:566 1244 984 Agent * Bundles 1 updates:
> 2008-07-16 08:03:28:566 1244 984 Agent *
> {57628421-F03D-4324-8004-09E257363D45}.102
> 2008-07-16 08:03:33:580 1244 858 Report REPORT EVENT:
> {7BE88842-642A-4B8A-82D2-74E91E88EC9C} 2008-07-16 08:03:28:388+1000 1 147
> 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success
> Software Synchronization Windows Update Client successfully detected 1
> updates.
> 2008-07-16 08:03:33:580 1244 858 Report REPORT EVENT:
> {8D8A28DA-43A4-4468-87B6-294B0BD1A5F4} 2008-07-16 08:03:28:404+1000 1 156
> 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success
> Pre-Deployment Check Reporting client status.
> 2008-07-16 08:03:33:580 1244 858 Report REPORT EVENT:
> {C46361C2-3377-4C9A-978A-474335F18CB3} 2008-07-16 08:03:28:534+1000 1 188
> 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success
> Content Install Installation Ready: The following updates are downloaded
> and ready for installation. This computer is currently scheduled to
> install these updates on Wednesday, 16 July 2008 at 8:03 AM: - Update for
> .NET Framework 3.0: x86 (KB932471)
> 2008-07-16 08:04:51:147 1244 984 DnldMgr Preparing update for install,
> updateId = {57628421-F03D-4324-8004-09E257363D45}.102.
> 2008-07-16 08:04:51:212 2476 9c4 Misc =========== Logging initialized
> (build: 7.1.6001.65, tz: +1000) ===========
> 2008-07-16 08:04:51:212 2476 9c4 Misc = Process:
> C:\WINDOWS\system32\wuauclt.exe
> 2008-07-16 08:04:51:212 2476 9c4 Misc = Module:
> C:\WINDOWS\system32\wuaueng.dll
> 2008-07-16 08:04:51:212 2476 9c4 Handler :::::::::::::
> 2008-07-16 08:04:51:212 2476 9c4 Handler :: START :: Handler: Command
> Line Install
> 2008-07-16 08:04:51:212 2476 9c4 Handler :::::::::
> 2008-07-16 08:04:51:212 2476 9c4 Handler : Updates to install = 1
> 2008-07-16 08:04:51:715 2476 9c4 Handler : WARNING: Command line install
> completed. Return code = 0x0000066a, Result = Failed, Reboot required =
> false
> 2008-07-16 08:04:51:715 2476 9c4 Handler : WARNING: Exit code =
> 0x8024200B
> 2008-07-16 08:04:51:715 1244 980 AU >>## RESUMED ## AU: Installing
> update [UpdateId = {60B5D7CF-F273-47DC-83AB-0679B1DFF42C}]
> 2008-07-16 08:04:51:715 2476 9c4 Handler :::::::::
> 2008-07-16 08:04:51:715 1244 980 AU # WARNING: Install failed, error =
> 0x80070643 / 0x0000066A
> 2008-07-16 08:04:51:715 2476 9c4 Handler :: END :: Handler: Command
> Line Install
> 2008-07-16 08:04:51:715 2476 9c4 Handler :::::::::::::
> 2008-07-16 08:04:51:894 1244 984 Agent *********
> 2008-07-16 08:04:51:894 1244 980 AU Install call completed.
> 2008-07-16 08:04:51:894 1244 984 Agent ** END ** Agent: Installing
> updates [CallerId = AutomaticUpdates]
> 2008-07-16 08:04:51:894 1244 980 AU # WARNING: Install call completed,
> reboot required = No, error = 0x00000000
> 2008-07-16 08:04:51:894 1244 984 Agent *************
> 2008-07-16 08:04:51:894 1244 980 AU #########
> 2008-07-16 08:04:51:894 1244 980 AU ## END ## AU: Installing updates
> [CallId = {13B69390-8150-427C-ADBA-6F610FC04504}]
>
>
>
>

I uninstalled .net 3.0 not the SP1 files. They just ceased to exist too. Of
course it may have been repackaged since I did it.

On Wed, 16 Jul 2008 16:56:41 +1000, "Mike" <> wrote:

>Tried that too -
>Product: Microsoft .NET Framework 3.0 Service Pack 1 -- Microsoft .NET
>Framework 3.0 Service Pack 1 cannot be uninstalled because it will affect
>other applications that are installed. For more information, see
>http://go.microsoft.com/fwlink/?LinkId=91126.
>
>"DaveMills" <> wrote in message
>news:.. .
>> It's been a couple of years and I do not recall the error number but when
>> .net
>> 3.0 SP1 failed on some of my systems I uninstalled 3.0 and re-installed
>> it. Then
>> all the updates started to work.
>>
>> On Wed, 16 Jul 2008 12:25:44 +1000, "Mike" <> wrote:
>>
>>>
>>>Lawrence,
>>>
>>>Update failed in both suggested scenarios. These machines have .NET 3.0
>>>SP1
>>>installed. (3.1.21022)
>>>
>>>
>>>
>>> This particular update (KB932471) has failed on all 32 machines that
>>> WSUS
>>>has tried to install it on. Manual install from TechNet CD also failed.
>>>
>>>
>>>
>>>I'm posting here to decipher the error code the update is returning,
>>>rather
>>>than generic reasons of failure.
>>>
>>>
>>>
>>>
>>>"Lawrence Garvin" <> wrote in message
>>>news:%. ..
>>>> "Mike" <> wrote in message
>>>> news:%...
>>>>>
>>>>> Any ideas?
>>>>>
>>>>> Event Viewer:
>>>>> Installation Failure: Windows failed to install the following update
>>>>> with
>>>>> error 0x80070643: Update for .NET Framework 3.0: x86 (KB932471).
>>>>
>>>> .NET Framework updates and service packs quite often fail when
>>>> applications are in use on a system.
>>>>
>>>>> 2008-07-16 08:03:28:550 1244 b8 AU # Initiating deadline install
>>>>
>>>>> 2008-07-16 08:04:51:715 2476 9c4 Handler : WARNING: Command line
>>>>> install completed. Return code = 0x0000066a, Result = Failed, Reboot
>>>>> required = false
>>>>
>>>>
>>>> I strongly recommend:
>>>> [a] Installing .NET Framework updates and service packs via scheduled
>>>> events when no user is logged on, or
>>>> [b] Installing .NET Framework updates and service packs from the
>>>> console when it's known for sure that no other Framework-based
>>>> applications are in use.
>>>>
>>>> If the update fails in both of those scenarios, then you might have a
>>>> defective installer, or a defective installation of the applicable .NET
>>>> Framework.
>>>>
>>>> It's also conceivable that the detection logic of the update is
>>>> defective,
>>>> and the machine does not even have the .NET Framework v3.0 installed --
>>>> in
>>>> which case the update would also fail installation.
>>>>
>>>>
>>>> --
>>>> Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
>>>> Senior Data Architect, APQC, Houston, Texas
>>>> Microsoft MVP - Software Distribution (2005-2008)
>>>>
>>>> MS WSUS Website: http://www.microsoft.com/wsus
>>>> My Websites: http://www.onsitechsolutions.com;
>>>> http://wsusinfo.onsitechsolutions.com
>>>> My MVP Profile: http://mvp.support.microsoft.com/pro...awrence.Garvin
>>>>
>>>
>> --
>> Dave Mills
>> There are 10 type of people, those that understand binary and those that
>> don't.
>
--
Dave Mills
There are 10 type of people, those that understand binary and those that don't.

I think they may have as the only option I have is to unistall .net 3 sp1.

Anyway it's solved now. Thanks for your suggestion.

"DaveMills" <> wrote in message
news:...
> I uninstalled .net 3.0 not the SP1 files. They just ceased to exist too.
> Of
> course it may have been repackaged since I did it.
>
> On Wed, 16 Jul 2008 16:56:41 +1000, "Mike" <> wrote:
>
>>Tried that too -
>>Product: Microsoft .NET Framework 3.0 Service Pack 1 -- Microsoft .NET
>>Framework 3.0 Service Pack 1 cannot be uninstalled because it will affect
>>other applications that are installed. For more information, see
>>http://go.microsoft.com/fwlink/?LinkId=91126.
>>
>>"DaveMills" <> wrote in message
>>news:. ..
>>> It's been a couple of years and I do not recall the error number but
>>> when
>>> .net
>>> 3.0 SP1 failed on some of my systems I uninstalled 3.0 and re-installed
>>> it. Then
>>> all the updates started to work.
>>>
>>> On Wed, 16 Jul 2008 12:25:44 +1000, "Mike" <> wrote:
>>>
>>>>
>>>>Lawrence,
>>>>
>>>>Update failed in both suggested scenarios. These machines have .NET 3.0
>>>>SP1
>>>>installed. (3.1.21022)
>>>>
>>>>
>>>>
>>>> This particular update (KB932471) has failed on all 32 machines that
>>>> WSUS
>>>>has tried to install it on. Manual install from TechNet CD also failed.
>>>>
>>>>
>>>>
>>>>I'm posting here to decipher the error code the update is returning,
>>>>rather
>>>>than generic reasons of failure.
>>>>
>>>>
>>>>
>>>>
>>>>"Lawrence Garvin" <> wrote in message
>>>>news:%.. .
>>>>> "Mike" <> wrote in message
>>>>> news:%...
>>>>>>
>>>>>> Any ideas?
>>>>>>
>>>>>> Event Viewer:
>>>>>> Installation Failure: Windows failed to install the following update
>>>>>> with
>>>>>> error 0x80070643: Update for .NET Framework 3.0: x86 (KB932471).
>>>>>
>>>>> .NET Framework updates and service packs quite often fail when
>>>>> applications are in use on a system.
>>>>>
>>>>>> 2008-07-16 08:03:28:550 1244 b8 AU # Initiating deadline install
>>>>>
>>>>>> 2008-07-16 08:04:51:715 2476 9c4 Handler : WARNING: Command line
>>>>>> install completed. Return code = 0x0000066a, Result = Failed, Reboot
>>>>>> required = false
>>>>>
>>>>>
>>>>> I strongly recommend:
>>>>> [a] Installing .NET Framework updates and service packs via
>>>>> scheduled
>>>>> events when no user is logged on, or
>>>>> [b] Installing .NET Framework updates and service packs from the
>>>>> console when it's known for sure that no other Framework-based
>>>>> applications are in use.
>>>>>
>>>>> If the update fails in both of those scenarios, then you might have a
>>>>> defective installer, or a defective installation of the applicable
>>>>> .NET
>>>>> Framework.
>>>>>
>>>>> It's also conceivable that the detection logic of the update is
>>>>> defective,
>>>>> and the machine does not even have the .NET Framework v3.0
>>>>> installed --
>>>>> in
>>>>> which case the update would also fail installation.
>>>>>
>>>>>
>>>>> --
>>>>> Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
>>>>> Senior Data Architect, APQC, Houston, Texas
>>>>> Microsoft MVP - Software Distribution (2005-2008)
>>>>>
>>>>> MS WSUS Website: http://www.microsoft.com/wsus
>>>>> My Websites: http://www.onsitechsolutions.com;
>>>>> http://wsusinfo.onsitechsolutions.com
>>>>> My MVP Profile:
>>>>> http://mvp.support.microsoft.com/pro...awrence.Garvin
>>>>>
>>>>
>>> --
>>> Dave Mills
>>> There are 10 type of people, those that understand binary and those that
>>> don't.
>>
> --
> Dave Mills
> There are 10 type of people, those that understand binary and those that
> don't.