Medion TV-Tunercard doesn't work with Media Center

My Medion TV-Tunercard ( Medion TV-Tuner 7134 MK2/3 + Medion (7134) WDM
Video Capture ) doesn't work with Media Center.
Thanks in advance for a solution !

deeppurple1998

MCE requires a hardware mpeg2 encoder. If your card use a software enconder
it will never work under MCE.

--
----------------------------------------------------------------
Somedays I'm the Snark, others the Boojum!
----------------------------------------------------------------
"deeppurple1998" <> wrote in message
news:15C4B4B5-0252-474A-8AA5-...
> My Medion TV-Tunercard ( Medion TV-Tuner 7134 MK2/3 + Medion (7134) WDM
> Video Capture ) doesn't work with Media Center.
> Thanks in advance for a solution !
>
> deeppurple1998

"Peter M" <> wrote in message
news:...
> MCE requires a hardware mpeg2 encoder. If your card use a software
> enconder it will never work under MCE.

Flatly untrue.

The ATI HDTV Wonder (and ATI All-In-Wonder series) all use software MPEG2
encoding, and all are supported in MCE 2005 (additionally, the HDTV Wonder
is supported *standalone* since Vista 5456). MCE 2002/2004 *did* require
hardware MPEG-2 support, but that isn't true of either MCE 2005 *or* Vista.

Christopher L. Estep

You have it backwords
All HDTV tuner cards need no encoder since the digital ATSC broadcasts are
already encoded.
ATI introduced a software encoder with MCE 2004 for its AIW N TSC tuner
cards which was approved by Microsoft as long as a HT or dual CPU system was
used due to the high CPU utilization required for software encoding.
With the introduction of multiple tuner support by MS with the introduction
of MCE2005 MS would no longer approved software encoders in order for a
vendor to qualify their cards for the MCE2005 logo program. ATI of course
supports this implementation on their own.
In early summer of 2005 ATI upgraded the software encoder that worked with
MCE 2004 so it would work with MCE 2005 and provided it to AIW card
purcharsers as part of the ATI MMC media center application. AFAIK ATI has
not upgraded this software encoder again for VISTA so that it can be used
with AIW cards or with the NTSC tuner on the HDTV tuner card.
Since Vista does not require an NTSC tuner card in order for a ATSC tuner
card to be used the ATSC tuner side of the HDTV wonder should work fine with
vista since as I stated before all ATSC video is already encoded so no
encoding hardware or software is required.

"Christopher L. Estep" <> wrote in message
news84112FA-4508-4928-9FD3-...
>
> "Peter M" <> wrote in message
> news:...
>> MCE requires a hardware mpeg2 encoder. If your card use a software
>> enconder it will never work under MCE.
>
> Flatly untrue.
>
> The ATI HDTV Wonder (and ATI All-In-Wonder series) all use software MPEG2
> encoding, and all are supported in MCE 2005 (additionally, the HDTV Wonder
> is supported *standalone* since Vista 5456). MCE 2002/2004 *did* require
> hardware MPEG-2 support, but that isn't true of either MCE 2005 *or*
> Vista.
>
> Christopher L. Estep
>
>