Mobile Active Sync with Exchange

I use mobile activesync to sync with my Exchange server and all is well.
Running Exchange 2003 on the server and Windows Mobile 5.0 on the PocketPC.
My domain based email address is more or less dead and it receives a
tremendous amount of spam so I want to simply change it or delete it. But
when I do, I am no longer able to sync. So, what has to match what?

before (this works):
NT Username: andy
NT Domain: CORPORATE
Exchange Email Address:
Active Sync Username: andy
Active Sync Domain: CORPORATE

after (this doesn't work):
NT Username: andy
NT Domain: CORPORATE
Exchange Email Address:
Active Sync Domain: CORPORATE

note: mydomain.com is the default exchange and system domain.

I have tried both andy and andy.robinson for the activesync username.
Neither works.

Does the exchange name have to match the NT username?

Any info would be appreciated. Thanks,


-Andrew

Hi,
Try deleting the Exchange information on the Windows Mobile 5.0 device and
re set it back up.


--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.tabletpctalk.com
http://www.pocketpctalk.com
http://www.mobilitytalk.com

ActiveSync 4.x Troubleshooting Guide -
http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm

"Andrew Robinson" <> wrote in message
news:...
>I use mobile activesync to sync with my Exchange server and all is well.
>Running Exchange 2003 on the server and Windows Mobile 5.0 on the PocketPC.
>My domain based email address is more or less dead and it receives a
>tremendous amount of spam so I want to simply change it or delete it. But
>when I do, I am no longer able to sync. So, what has to match what?
>
> before (this works):
> NT Username: andy
> NT Domain: CORPORATE
> Exchange Email Address:
> Active Sync Username: andy
> Active Sync Domain: CORPORATE
>
> after (this doesn't work):
> NT Username: andy
> NT Domain: CORPORATE
> Exchange Email Address:
> Active Sync Domain: CORPORATE
>
> note: mydomain.com is the default exchange and system domain.
>
> I have tried both andy and andy.robinson for the activesync username.
> Neither works.
>
> Does the exchange name have to match the NT username?
>
> Any info would be appreciated. Thanks,
>
>
> -Andrew
>
>
>

Chris,

I have tried this on a "just hard reseted" Pocket PC. Same issue.

Just realized that the exchange server is only at SP1 and am guessing this
might be an issue? Will take care of that this weekend and try again.

-Andrew

--

Andrew Robinson
http://blog.binaryocean.com


"Chris De Herrera" <> wrote in message
news:...
> Hi,
> Try deleting the Exchange information on the Windows Mobile 5.0 device and
> re set it back up.
>
>
> --
> Chris De Herrera
> http://www.pocketpcfaq.com
> http://www.tabletpctalk.com
> http://www.pocketpctalk.com
> http://www.mobilitytalk.com
>
> ActiveSync 4.x Troubleshooting Guide -
> http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
>
> "Andrew Robinson" <> wrote in message
> news:...
>>I use mobile activesync to sync with my Exchange server and all is well.
>>Running Exchange 2003 on the server and Windows Mobile 5.0 on the
>>PocketPC. My domain based email address is more or less dead and it
>>receives a tremendous amount of spam so I want to simply change it or
>>delete it. But when I do, I am no longer able to sync. So, what has to
>>match what?
>>
>> before (this works):
>> NT Username: andy
>> NT Domain: CORPORATE
>> Exchange Email Address:
>> Active Sync Username: andy
>> Active Sync Domain: CORPORATE
>>
>> after (this doesn't work):
>> NT Username: andy
>> NT Domain: CORPORATE
>> Exchange Email Address:
>> Active Sync Domain: CORPORATE
>>
>> note: mydomain.com is the default exchange and system domain.
>>
>> I have tried both andy and andy.robinson for the activesync username.
>> Neither works.
>>
>> Does the exchange name have to match the NT username?
>>
>> Any info would be appreciated. Thanks,
>>
>>
>> -Andrew
>>
>>
>>
>
>

Hello Andrew, may I ask which phone you are using? Also, the SP2 for
Exchange will offer the "Push Technology" but it seems that it will only
work if you phone manufacturer has released a msfp update.
With your current configuration are you setting active sync to retrieve your
email at timed intervals? Will this run in the background
If you would, email me offline the response to this.
"Andrew Robinson" <> wrote in message
news:...
> Chris,
>
> I have tried this on a "just hard reseted" Pocket PC. Same issue.
>
> Just realized that the exchange server is only at SP1 and am guessing this
> might be an issue? Will take care of that this weekend and try again.
>
> -Andrew
>
> --
>
> Andrew Robinson
> http://blog.binaryocean.com
>
>
> "Chris De Herrera" <> wrote in message
> news:...
>> Hi,
>> Try deleting the Exchange information on the Windows Mobile 5.0 device
>> and re set it back up.
>>
>>
>> --
>> Chris De Herrera
>> http://www.pocketpcfaq.com
>> http://www.tabletpctalk.com
>> http://www.pocketpctalk.com
>> http://www.mobilitytalk.com
>>
>> ActiveSync 4.x Troubleshooting Guide -
>> http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
>>
>> "Andrew Robinson" <> wrote in message
>> news:...
>>>I use mobile activesync to sync with my Exchange server and all is well.
>>>Running Exchange 2003 on the server and Windows Mobile 5.0 on the
>>>PocketPC. My domain based email address is more or less dead and it
>>>receives a tremendous amount of spam so I want to simply change it or
>>>delete it. But when I do, I am no longer able to sync. So, what has to
>>>match what?
>>>
>>> before (this works):
>>> NT Username: andy
>>> NT Domain: CORPORATE
>>> Exchange Email Address:
>>> Active Sync Username: andy
>>> Active Sync Domain: CORPORATE
>>>
>>> after (this doesn't work):
>>> NT Username: andy
>>> NT Domain: CORPORATE
>>> Exchange Email Address:
>>> Active Sync Domain: CORPORATE
>>>
>>> note: mydomain.com is the default exchange and system domain.
>>>
>>> I have tried both andy and andy.robinson for the activesync username.
>>> Neither works.
>>>
>>> Does the exchange name have to match the NT username?
>>>
>>> Any info would be appreciated. Thanks,
>>>
>>>
>>> -Andrew
>>>
>>>
>>>
>>
>>
>
>

Chris,
If I were to set the Synchronized Pull from the device, when it pulls from
the exchange server does it utilize the https 443 port for active sync? I
already have 443 running for owa on the same f/e server

"Chris Jordan" wrote:

> Exchange 2003 SP2 offers "Push", but it does require an update to the
> current devices that are out in the wild.
> Exchange 2003 SP2 (or SP1) offers:
> - Synchronised pull. Set your timing on the device to every 5 minutes, and
> you almost have complete up-to-date mail.
> - SMS triggered pull. If you are using a SmartPhone of Phone Edition
> device, you can get the Exchange system to send you an SMS message, which
> will trigger a synchronisation from the device. This is the AUTD (Always Up
> To Date) capability.
>
> If you are wanting to configure Exchange to do this, try looking here:
> http://www.microsoft.com/windowsmobi...messaging.mspx
>
>
> "User" <> wrote in message
> news:%...
> > Hello Andrew, may I ask which phone you are using? Also, the SP2 for
> > Exchange will offer the "Push Technology" but it seems that it will only
> > work if you phone manufacturer has released a msfp update.
> > With your current configuration are you setting active sync to retrieve
> > your email at timed intervals? Will this run in the background
> > If you would, email me offline the response to this.
> > "Andrew Robinson" <> wrote in message
> > news:...
> >> Chris,
> >>
> >> I have tried this on a "just hard reseted" Pocket PC. Same issue.
> >>
> >> Just realized that the exchange server is only at SP1 and am guessing
> >> this might be an issue? Will take care of that this weekend and try
> >> again.
> >>
> >> -Andrew
> >>
> >> --
> >>
> >> Andrew Robinson
> >> http://blog.binaryocean.com
> >>
> >>
> >> "Chris De Herrera" <> wrote in message
> >> news:...
> >>> Hi,
> >>> Try deleting the Exchange information on the Windows Mobile 5.0 device
> >>> and re set it back up.
> >>>
> >>>
> >>> --
> >>> Chris De Herrera
> >>> http://www.pocketpcfaq.com
> >>> http://www.tabletpctalk.com
> >>> http://www.pocketpctalk.com
> >>> http://www.mobilitytalk.com
> >>>
> >>> ActiveSync 4.x Troubleshooting Guide -
> >>> http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
> >>>
> >>> "Andrew Robinson" <> wrote in message
> >>> news:...
> >>>>I use mobile activesync to sync with my Exchange server and all is well.
> >>>>Running Exchange 2003 on the server and Windows Mobile 5.0 on the
> >>>>PocketPC. My domain based email address is more or less dead and it
> >>>>receives a tremendous amount of spam so I want to simply change it or
> >>>>delete it. But when I do, I am no longer able to sync. So, what has to
> >>>>match what?
> >>>>
> >>>> before (this works):
> >>>> NT Username: andy
> >>>> NT Domain: CORPORATE
> >>>> Exchange Email Address:
> >>>> Active Sync Username: andy
> >>>> Active Sync Domain: CORPORATE
> >>>>
> >>>> after (this doesn't work):
> >>>> NT Username: andy
> >>>> NT Domain: CORPORATE
> >>>> Exchange Email Address:
> >>>> Active Sync Domain: CORPORATE
> >>>>
> >>>> note: mydomain.com is the default exchange and system domain.
> >>>>
> >>>> I have tried both andy and andy.robinson for the activesync username.
> >>>> Neither works.
> >>>>
> >>>> Does the exchange name have to match the NT username?
> >>>>
> >>>> Any info would be appreciated. Thanks,
> >>>>
> >>>>
> >>>> -Andrew
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>
> >>
> >
> >
>
>
>

Hi,
Yes the pull uses 443 after performing a DNS lookup for the IP address.


--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.tabletpctalk.com
http://www.pocketpctalk.com
http://www.mobilitytalk.com

ActiveSync 4.x Troubleshooting Guide -
http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm

"JH" <> wrote in message
news:59A71AFE-BC0B-45CC-BD1D-...
> Chris,
> If I were to set the Synchronized Pull from the device, when it pulls from
> the exchange server does it utilize the https 443 port for active sync? I
> already have 443 running for owa on the same f/e server
>
> "Chris Jordan" wrote:
>
>> Exchange 2003 SP2 offers "Push", but it does require an update to the
>> current devices that are out in the wild.
>> Exchange 2003 SP2 (or SP1) offers:
>> - Synchronised pull. Set your timing on the device to every 5 minutes,
>> and
>> you almost have complete up-to-date mail.
>> - SMS triggered pull. If you are using a SmartPhone of Phone Edition
>> device, you can get the Exchange system to send you an SMS message, which
>> will trigger a synchronisation from the device. This is the AUTD (Always
>> Up
>> To Date) capability.
>>
>> If you are wanting to configure Exchange to do this, try looking here:
>> http://www.microsoft.com/windowsmobi...messaging.mspx
>>
>>
>> "User" <> wrote in message
>> news:%...
>> > Hello Andrew, may I ask which phone you are using? Also, the SP2 for
>> > Exchange will offer the "Push Technology" but it seems that it will
>> > only
>> > work if you phone manufacturer has released a msfp update.
>> > With your current configuration are you setting active sync to retrieve
>> > your email at timed intervals? Will this run in the background
>> > If you would, email me offline the response to this.
>> > "Andrew Robinson" <> wrote in message
>> > news:...
>> >> Chris,
>> >>
>> >> I have tried this on a "just hard reseted" Pocket PC. Same issue.
>> >>
>> >> Just realized that the exchange server is only at SP1 and am guessing
>> >> this might be an issue? Will take care of that this weekend and try
>> >> again.
>> >>
>> >> -Andrew
>> >>
>> >> --
>> >>
>> >> Andrew Robinson
>> >> http://blog.binaryocean.com
>> >>
>> >>
>> >> "Chris De Herrera" <> wrote in message
>> >> news:...
>> >>> Hi,
>> >>> Try deleting the Exchange information on the Windows Mobile 5.0
>> >>> device
>> >>> and re set it back up.
>> >>>
>> >>>
>> >>> --
>> >>> Chris De Herrera
>> >>> http://www.pocketpcfaq.com
>> >>> http://www.tabletpctalk.com
>> >>> http://www.pocketpctalk.com
>> >>> http://www.mobilitytalk.com
>> >>>
>> >>> ActiveSync 4.x Troubleshooting Guide -
>> >>> http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
>> >>>
>> >>> "Andrew Robinson" <> wrote in message
>> >>> news:...
>> >>>>I use mobile activesync to sync with my Exchange server and all is
>> >>>>well.
>> >>>>Running Exchange 2003 on the server and Windows Mobile 5.0 on the
>> >>>>PocketPC. My domain based email address is more or less dead and it
>> >>>>receives a tremendous amount of spam so I want to simply change it or
>> >>>>delete it. But when I do, I am no longer able to sync. So, what has
>> >>>>to
>> >>>>match what?
>> >>>>
>> >>>> before (this works):
>> >>>> NT Username: andy
>> >>>> NT Domain: CORPORATE
>> >>>> Exchange Email Address:
>> >>>> Active Sync Username: andy
>> >>>> Active Sync Domain: CORPORATE
>> >>>>
>> >>>> after (this doesn't work):
>> >>>> NT Username: andy
>> >>>> NT Domain: CORPORATE
>> >>>> Exchange Email Address:
>> >>>> Active Sync Domain: CORPORATE
>> >>>>
>> >>>> note: mydomain.com is the default exchange and system domain.
>> >>>>
>> >>>> I have tried both andy and andy.robinson for the activesync
>> >>>> username.
>> >>>> Neither works.
>> >>>>
>> >>>> Does the exchange name have to match the NT username?
>> >>>>
>> >>>> Any info would be appreciated. Thanks,
>> >>>>
>> >>>>
>> >>>> -Andrew
>> >>>>
>> >>>>
>> >>>>
>> >>>
>> >>>
>> >>
>> >>
>> >
>> >
>>
>>
>>

Chris, will this work the same way over port 443 if I do not have SP2
installed on the front end server? The actual pull method via active sync
that is.

Thanks

"Chris De Herrera" wrote:

> Hi,
> Yes the pull uses 443 after performing a DNS lookup for the IP address.
>
>
> --
> Chris De Herrera
> http://www.pocketpcfaq.com
> http://www.tabletpctalk.com
> http://www.pocketpctalk.com
> http://www.mobilitytalk.com
>
> ActiveSync 4.x Troubleshooting Guide -
> http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
>
> "JH" <> wrote in message
> news:59A71AFE-BC0B-45CC-BD1D-...
> > Chris,
> > If I were to set the Synchronized Pull from the device, when it pulls from
> > the exchange server does it utilize the https 443 port for active sync? I
> > already have 443 running for owa on the same f/e server
> >
> > "Chris Jordan" wrote:
> >
> >> Exchange 2003 SP2 offers "Push", but it does require an update to the
> >> current devices that are out in the wild.
> >> Exchange 2003 SP2 (or SP1) offers:
> >> - Synchronised pull. Set your timing on the device to every 5 minutes,
> >> and
> >> you almost have complete up-to-date mail.
> >> - SMS triggered pull. If you are using a SmartPhone of Phone Edition
> >> device, you can get the Exchange system to send you an SMS message, which
> >> will trigger a synchronisation from the device. This is the AUTD (Always
> >> Up
> >> To Date) capability.
> >>
> >> If you are wanting to configure Exchange to do this, try looking here:
> >> http://www.microsoft.com/windowsmobi...messaging.mspx
> >>
> >>
> >> "User" <> wrote in message
> >> news:%...
> >> > Hello Andrew, may I ask which phone you are using? Also, the SP2 for
> >> > Exchange will offer the "Push Technology" but it seems that it will
> >> > only
> >> > work if you phone manufacturer has released a msfp update.
> >> > With your current configuration are you setting active sync to retrieve
> >> > your email at timed intervals? Will this run in the background
> >> > If you would, email me offline the response to this.
> >> > "Andrew Robinson" <> wrote in message
> >> > news:...
> >> >> Chris,
> >> >>
> >> >> I have tried this on a "just hard reseted" Pocket PC. Same issue.
> >> >>
> >> >> Just realized that the exchange server is only at SP1 and am guessing
> >> >> this might be an issue? Will take care of that this weekend and try
> >> >> again.
> >> >>
> >> >> -Andrew
> >> >>
> >> >> --
> >> >>
> >> >> Andrew Robinson
> >> >> http://blog.binaryocean.com
> >> >>
> >> >>
> >> >> "Chris De Herrera" <> wrote in message
> >> >> news:...
> >> >>> Hi,
> >> >>> Try deleting the Exchange information on the Windows Mobile 5.0
> >> >>> device
> >> >>> and re set it back up.
> >> >>>
> >> >>>
> >> >>> --
> >> >>> Chris De Herrera
> >> >>> http://www.pocketpcfaq.com
> >> >>> http://www.tabletpctalk.com
> >> >>> http://www.pocketpctalk.com
> >> >>> http://www.mobilitytalk.com
> >> >>>
> >> >>> ActiveSync 4.x Troubleshooting Guide -
> >> >>> http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
> >> >>>
> >> >>> "Andrew Robinson" <> wrote in message
> >> >>> news:...
> >> >>>>I use mobile activesync to sync with my Exchange server and all is
> >> >>>>well.
> >> >>>>Running Exchange 2003 on the server and Windows Mobile 5.0 on the
> >> >>>>PocketPC. My domain based email address is more or less dead and it
> >> >>>>receives a tremendous amount of spam so I want to simply change it or
> >> >>>>delete it. But when I do, I am no longer able to sync. So, what has
> >> >>>>to
> >> >>>>match what?
> >> >>>>
> >> >>>> before (this works):
> >> >>>> NT Username: andy
> >> >>>> NT Domain: CORPORATE
> >> >>>> Exchange Email Address:
> >> >>>> Active Sync Username: andy
> >> >>>> Active Sync Domain: CORPORATE
> >> >>>>
> >> >>>> after (this doesn't work):
> >> >>>> NT Username: andy
> >> >>>> NT Domain: CORPORATE
> >> >>>> Exchange Email Address:
> >> >>>> Active Sync Domain: CORPORATE
> >> >>>>
> >> >>>> note: mydomain.com is the default exchange and system domain.
> >> >>>>
> >> >>>> I have tried both andy and andy.robinson for the activesync
> >> >>>> username.
> >> >>>> Neither works.
> >> >>>>
> >> >>>> Does the exchange name have to match the NT username?
> >> >>>>
> >> >>>> Any info would be appreciated. Thanks,
> >> >>>>
> >> >>>>
> >> >>>> -Andrew
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>
> >> >>>
> >> >>
> >> >>
> >> >
> >> >
> >>
> >>
> >>
>
>
>

Yes, that's my understanding. I tested SP1 with my SBS server and it used
443.


--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.tabletpctalk.com
http://www.pocketpctalk.com
http://www.mobilitytalk.com

ActiveSync 4.x Troubleshooting Guide -
http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm

"JH" <> wrote in message
news:024DBD52-6264-44A1-B7AE-...
> Chris, will this work the same way over port 443 if I do not have SP2
> installed on the front end server? The actual pull method via active sync
> that is.
>
> Thanks
>
> "Chris De Herrera" wrote:
>
>> Hi,
>> Yes the pull uses 443 after performing a DNS lookup for the IP address.
>>
>>
>> --
>> Chris De Herrera
>> http://www.pocketpcfaq.com
>> http://www.tabletpctalk.com
>> http://www.pocketpctalk.com
>> http://www.mobilitytalk.com
>>
>> ActiveSync 4.x Troubleshooting Guide -
>> http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
>>
>> "JH" <> wrote in message
>> news:59A71AFE-BC0B-45CC-BD1D-...
>> > Chris,
>> > If I were to set the Synchronized Pull from the device, when it pulls
>> > from
>> > the exchange server does it utilize the https 443 port for active sync?
>> > I
>> > already have 443 running for owa on the same f/e server
>> >
>> > "Chris Jordan" wrote:
>> >
>> >> Exchange 2003 SP2 offers "Push", but it does require an update to the
>> >> current devices that are out in the wild.
>> >> Exchange 2003 SP2 (or SP1) offers:
>> >> - Synchronised pull. Set your timing on the device to every 5
>> >> minutes,
>> >> and
>> >> you almost have complete up-to-date mail.
>> >> - SMS triggered pull. If you are using a SmartPhone of Phone Edition
>> >> device, you can get the Exchange system to send you an SMS message,
>> >> which
>> >> will trigger a synchronisation from the device. This is the AUTD
>> >> (Always
>> >> Up
>> >> To Date) capability.
>> >>
>> >> If you are wanting to configure Exchange to do this, try looking here:
>> >> http://www.microsoft.com/windowsmobi...messaging.mspx
>> >>
>> >>
>> >> "User" <> wrote in message
>> >> news:%...
>> >> > Hello Andrew, may I ask which phone you are using? Also, the SP2 for
>> >> > Exchange will offer the "Push Technology" but it seems that it will
>> >> > only
>> >> > work if you phone manufacturer has released a msfp update.
>> >> > With your current configuration are you setting active sync to
>> >> > retrieve
>> >> > your email at timed intervals? Will this run in the background
>> >> > If you would, email me offline the response to this.
>> >> > "Andrew Robinson" <> wrote in message
>> >> > news:...
>> >> >> Chris,
>> >> >>
>> >> >> I have tried this on a "just hard reseted" Pocket PC. Same issue.
>> >> >>
>> >> >> Just realized that the exchange server is only at SP1 and am
>> >> >> guessing
>> >> >> this might be an issue? Will take care of that this weekend and try
>> >> >> again.
>> >> >>
>> >> >> -Andrew
>> >> >>
>> >> >> --
>> >> >>
>> >> >> Andrew Robinson
>> >> >> http://blog.binaryocean.com
>> >> >>
>> >> >>
>> >> >> "Chris De Herrera" <> wrote in message
>> >> >> news:...
>> >> >>> Hi,
>> >> >>> Try deleting the Exchange information on the Windows Mobile 5.0
>> >> >>> device
>> >> >>> and re set it back up.
>> >> >>>
>> >> >>>
>> >> >>> --
>> >> >>> Chris De Herrera
>> >> >>> http://www.pocketpcfaq.com
>> >> >>> http://www.tabletpctalk.com
>> >> >>> http://www.pocketpctalk.com
>> >> >>> http://www.mobilitytalk.com
>> >> >>>
>> >> >>> ActiveSync 4.x Troubleshooting Guide -
>> >> >>> http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
>> >> >>>
>> >> >>> "Andrew Robinson" <> wrote in message
>> >> >>> news:...
>> >> >>>>I use mobile activesync to sync with my Exchange server and all is
>> >> >>>>well.
>> >> >>>>Running Exchange 2003 on the server and Windows Mobile 5.0 on the
>> >> >>>>PocketPC. My domain based email address is more or less dead and
>> >> >>>>it
>> >> >>>>receives a tremendous amount of spam so I want to simply change it
>> >> >>>>or
>> >> >>>>delete it. But when I do, I am no longer able to sync. So, what
>> >> >>>>has
>> >> >>>>to
>> >> >>>>match what?
>> >> >>>>
>> >> >>>> before (this works):
>> >> >>>> NT Username: andy
>> >> >>>> NT Domain: CORPORATE
>> >> >>>> Exchange Email Address:
>> >> >>>> Active Sync Username: andy
>> >> >>>> Active Sync Domain: CORPORATE
>> >> >>>>
>> >> >>>> after (this doesn't work):
>> >> >>>> NT Username: andy
>> >> >>>> NT Domain: CORPORATE
>> >> >>>> Exchange Email Address:
>> >> >>>> Active Sync Domain: CORPORATE
>> >> >>>>
>> >> >>>> note: mydomain.com is the default exchange and system domain.
>> >> >>>>
>> >> >>>> I have tried both andy and andy.robinson for the activesync
>> >> >>>> username.
>> >> >>>> Neither works.
>> >> >>>>
>> >> >>>> Does the exchange name have to match the NT username?
>> >> >>>>
>> >> >>>> Any info would be appreciated. Thanks,
>> >> >>>>
>> >> >>>>
>> >> >>>> -Andrew
>> >> >>>>
>> >> >>>>
>> >> >>>>
>> >> >>>
>> >> >>>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >>
>>
>>
>>

Actually not using a phone but a Dell x50 with the MW 5.0 upgrade. I sync
exclusively over WiFi directly to an Exchange server from home, work and a
few spots on the road.

--

Andrew Robinson
http://blog.binaryocean.com


"User" <> wrote in message
news:%...
> Hello Andrew, may I ask which phone you are using? Also, the SP2 for
> Exchange will offer the "Push Technology" but it seems that it will only
> work if you phone manufacturer has released a msfp update.
> With your current configuration are you setting active sync to retrieve
> your email at timed intervals? Will this run in the background
> If you would, email me offline the response to this.
> "Andrew Robinson" <> wrote in message
> news:...
>> Chris,
>>
>> I have tried this on a "just hard reseted" Pocket PC. Same issue.
>>
>> Just realized that the exchange server is only at SP1 and am guessing
>> this might be an issue? Will take care of that this weekend and try
>> again.
>>
>> -Andrew
>>
>> --
>>
>> Andrew Robinson
>> http://blog.binaryocean.com
>>
>>
>> "Chris De Herrera" <> wrote in message
>> news:...
>>> Hi,
>>> Try deleting the Exchange information on the Windows Mobile 5.0 device
>>> and re set it back up.
>>>
>>>
>>> --
>>> Chris De Herrera
>>> http://www.pocketpcfaq.com
>>> http://www.tabletpctalk.com
>>> http://www.pocketpctalk.com
>>> http://www.mobilitytalk.com
>>>
>>> ActiveSync 4.x Troubleshooting Guide -
>>> http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
>>>
>>> "Andrew Robinson" <> wrote in message
>>> news:...
>>>>I use mobile activesync to sync with my Exchange server and all is well.
>>>>Running Exchange 2003 on the server and Windows Mobile 5.0 on the
>>>>PocketPC. My domain based email address is more or less dead and it
>>>>receives a tremendous amount of spam so I want to simply change it or
>>>>delete it. But when I do, I am no longer able to sync. So, what has to
>>>>match what?
>>>>
>>>> before (this works):
>>>> NT Username: andy
>>>> NT Domain: CORPORATE
>>>> Exchange Email Address:
>>>> Active Sync Username: andy
>>>> Active Sync Domain: CORPORATE
>>>>
>>>> after (this doesn't work):
>>>> NT Username: andy
>>>> NT Domain: CORPORATE
>>>> Exchange Email Address:
>>>> Active Sync Domain: CORPORATE
>>>>
>>>> note: mydomain.com is the default exchange and system domain.
>>>>
>>>> I have tried both andy and andy.robinson for the activesync username.
>>>> Neither works.
>>>>
>>>> Does the exchange name have to match the NT username?
>>>>
>>>> Any info would be appreciated. Thanks,
>>>>
>>>>
>>>> -Andrew
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Exchange has an issue synchronizing if the email address does not
match the username@UPN so in users and computers look at the
account tab tou will see a username in one field follwed by a UPN
needs to be listed there otherwise
activesync has issues

Hope this Helps

Andrew Shafer
Extradev, Inc

On Wed, 15 Feb 2006 11:13:25 -0800, "Andrew Robinson"
<> wrote:

>Actually not using a phone but a Dell x50 with the MW 5.0 upgrade. I sync
>exclusively over WiFi directly to an Exchange server from home, work and a
>few spots on the road.