MS ActiveSync 4.2 problem

Hi
I was able to sync my i mate JasJar successfully all these days through USB,
but for some days, ActiveSync is not getting conencted. For a long time, on
the AS screen the green disc was revolving & said connecting, but finally
gave a msg that the device cant be connected.
When I have seen the error log, it says the norton is preventing the
connection. But I have done all settings for norton. I have even tried
connecting JJ after disabling the norton, but activesycn doesnt work.

I have checked the following based on the forum posts & Chris' website (very
informative indeed), but in vain:
1. Configured norton, still doesnt work
2. Checked all services, still doesnt work
3. Disabled firewall, still doesnt work
4. Disabled norton, still doesnt work
5. exchanged USB ports, still doesnt work
6. Done soft reset, still doesnt work
7. Deleted some files, to make available Memory in device to about 11 MB,
still doesnt work
8. Unpaired the device from ActiveSync, still doesnt work
9. Uninstallaed & installaed Activesync, still doesnt work

When I connect my device, an icon appears in the system tray trying to
assign an IP address (some dots appear on network icon) and i guess its
failing there. I have read in some forum/ article, that before the device
connects to a PC, it assigns an IP address. Are there any settings for this?
Please help.
Cheers
Suresh Nallan

Yes, The Windows Mobile 5.0 Device has replaced the Serial over USB
implementation we had earlier with a newer device/desktop networking
solution built on Remote NDIS, which upon desktop connection registers as a
new Local Area Connection. The device will then assign an IP address to
itself and the desktop. In your case it seems that you don't even get the
correct IP address assigned to the desktop - Seems like it is timing out and
then you are gettign an Auto IP address.

Can you cradle your device and then open a command window and after say a
minute or two type "ipconfig" and paste as the output? Also - in case you
can get us a network trace of the traffic between the device and desktop, it
would help alot - you can use sniffers like ethereal to capture this.

Juggs Ravalia [MSFT]


This posting is provided "AS IS" with no warranties, and confers no rights.

"Little_Monster" <> wrote in message
news:444C1AAB-F789-4F54-9970-...
> Hi
> I was able to sync my i mate JasJar successfully all these days through
> USB,
> but for some days, ActiveSync is not getting conencted. For a long time,
> on
> the AS screen the green disc was revolving & said connecting, but finally
> gave a msg that the device cant be connected.
> When I have seen the error log, it says the norton is preventing the
> connection. But I have done all settings for norton. I have even tried
> connecting JJ after disabling the norton, but activesycn doesnt work.
>
> I have checked the following based on the forum posts & Chris' website
> (very
> informative indeed), but in vain:
> 1. Configured norton, still doesnt work
> 2. Checked all services, still doesnt work
> 3. Disabled firewall, still doesnt work
> 4. Disabled norton, still doesnt work
> 5. exchanged USB ports, still doesnt work
> 6. Done soft reset, still doesnt work
> 7. Deleted some files, to make available Memory in device to about 11 MB,
> still doesnt work
> 8. Unpaired the device from ActiveSync, still doesnt work
> 9. Uninstallaed & installaed Activesync, still doesnt work
>
> When I connect my device, an icon appears in the system tray trying to
> assign an IP address (some dots appear on network icon) and i guess its
> failing there. I have read in some forum/ article, that before the device
> connects to a PC, it assigns an IP address. Are there any settings for
> this?
> Please help.
> Cheers
> Suresh Nallan

Hi
Thanks for your inputs. The following is what I got for ipconfig:

Windows IP configuration

Ethernet adapter Wireless Network Connection:
Media State ........... : Media disconnected

Ethernet adapter Local Area Connection:
Media State ........... : Media disconnected

PPP adapter Speedtouch Connection:
Connection-specific DNS Suffix . :
IP Address....................... : 87.74.48.201
Subnet Mask...................... : 255.255.255.255
Default Gateway.................. : 87.74.48.201

Ethernet Local Area Connection 19:
Connection-specific DNS Suffix . :
IP Address....................... : 169.254.2.2
Subnet Mask...................... : 255.255.255.0
Default Gateway.................. :

I have used ethereal and following is the result:

1 0.000000 169.254.2.2 169.254.2.1 UDP Source port: 1214 Destination port:
5679
2 0.013369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
unreachable)
3 0.153227 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
4 0.163903 169.254.2.2 169.254.2.255 NBNS Registration NB LITTLE_GENIOUS<20>
5 0.567453 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
6 0.903224 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
7 0.913905 169.254.2.2 169.254.2.255 NBNS Registration NB LITTLE_GENIOUS<20>
8 1.001991 169.254.2.2 169.254.2.1 UDP Source port: 1215 Destination port:
5679
9 1.003368 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
unreachable)
10 1.276851 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
11 1.653220 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
12 1.663897 169.254.2.2 169.254.2.255 NBNS Registration NB LITTLE_GENIOUS<20>
13 2.003761 169.254.2.2 169.254.2.1 UDP Source port: 1216 Destination port:
5679
14 2.014369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
unreachable)
15 2.414566 169.254.2.2 169.254.2.255 BROWSER Request Announcement
LITTLE_GENIOUS
16 2.414717 169.254.2.2 169.254.2.255 BROWSER Request Announcement
LITTLE_GENIOUS, Workstation, Server, SQL Server, NT Workstation, Potential
Browser
17 3.005616 169.254.2.2 169.254.2.1 UDP Source port: 1217 Destination port:
5679
18 3.008401 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
unreachable)
19 3.913981 169.254.2.2 169.254.2.255 BROWSER Request Announcement
LITTLE_GENIOUS
20 4.173435 169.254.2.2 169.254.2.1 UDP Source port: 1218 Destination port:
5679
21 4.176366 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
unreachable)
22 5.175914 169.254.2.2 169.254.2.1 UDP Source port: 1219 Destination port:
5679
23 5.177369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
unreachable)

It went on like that for about 120 steps each time incrementing the source
port, with same results.

Trust you would find something out of this.
Cheers,
Suresh Nallan


"Juggs Ravalia (MS)" wrote:

> Yes, The Windows Mobile 5.0 Device has replaced the Serial over USB
> implementation we had earlier with a newer device/desktop networking
> solution built on Remote NDIS, which upon desktop connection registers as a
> new Local Area Connection. The device will then assign an IP address to
> itself and the desktop. In your case it seems that you don't even get the
> correct IP address assigned to the desktop - Seems like it is timing out and
> then you are gettign an Auto IP address.
>
> Can you cradle your device and then open a command window and after say a
> minute or two type "ipconfig" and paste as the output? Also - in case you
> can get us a network trace of the traffic between the device and desktop, it
> would help alot - you can use sniffers like ethereal to capture this.
>
> Juggs Ravalia [MSFT]
>
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Little_Monster" <> wrote in message
> news:444C1AAB-F789-4F54-9970-...
> > Hi
> > I was able to sync my i mate JasJar successfully all these days through
> > USB,
> > but for some days, ActiveSync is not getting conencted. For a long time,
> > on
> > the AS screen the green disc was revolving & said connecting, but finally
> > gave a msg that the device cant be connected.
> > When I have seen the error log, it says the norton is preventing the
> > connection. But I have done all settings for norton. I have even tried
> > connecting JJ after disabling the norton, but activesycn doesnt work.
> >
> > I have checked the following based on the forum posts & Chris' website
> > (very
> > informative indeed), but in vain:
> > 1. Configured norton, still doesnt work
> > 2. Checked all services, still doesnt work
> > 3. Disabled firewall, still doesnt work
> > 4. Disabled norton, still doesnt work
> > 5. exchanged USB ports, still doesnt work
> > 6. Done soft reset, still doesnt work
> > 7. Deleted some files, to make available Memory in device to about 11 MB,
> > still doesnt work
> > 8. Unpaired the device from ActiveSync, still doesnt work
> > 9. Uninstallaed & installaed Activesync, still doesnt work
> >
> > When I connect my device, an icon appears in the system tray trying to
> > assign an IP address (some dots appear on network icon) and i guess its
> > failing there. I have read in some forum/ article, that before the device
> > connects to a PC, it assigns an IP address. Are there any settings for
> > this?
> > Please help.
> > Cheers
> > Suresh Nallan
>
>
>

Hi,
It sounds like a software firewall may be preventing the connection.


--
Chris De Herrera
http://www.pocketpcfaq.com
http://www.tabletpctalk.com
http://www.pocketpctalk.com
http://www.mobilitytalk.com

ActiveSync 4.x Troubleshooting Guide -
http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm

"Little_Monster" <> wrote in message
news:196F8631-5848-4E31-8311-...
> Hi
> Thanks for your inputs. The following is what I got for ipconfig:
>
> Windows IP configuration
>
> Ethernet adapter Wireless Network Connection:
> Media State ........... : Media disconnected
>
> Ethernet adapter Local Area Connection:
> Media State ........... : Media disconnected
>
> PPP adapter Speedtouch Connection:
> Connection-specific DNS Suffix . :
> IP Address....................... : 87.74.48.201
> Subnet Mask...................... : 255.255.255.255
> Default Gateway.................. : 87.74.48.201
>
> Ethernet Local Area Connection 19:
> Connection-specific DNS Suffix . :
> IP Address....................... : 169.254.2.2
> Subnet Mask...................... : 255.255.255.0
> Default Gateway.................. :
>
> I have used ethereal and following is the result:
>
> 1 0.000000 169.254.2.2 169.254.2.1 UDP Source port: 1214 Destination
> port:
> 5679
> 2 0.013369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> unreachable)
> 3 0.153227 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
> 4 0.163903 169.254.2.2 169.254.2.255 NBNS Registration NB
> LITTLE_GENIOUS<20>
> 5 0.567453 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
> 6 0.903224 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
> 7 0.913905 169.254.2.2 169.254.2.255 NBNS Registration NB
> LITTLE_GENIOUS<20>
> 8 1.001991 169.254.2.2 169.254.2.1 UDP Source port: 1215 Destination
> port:
> 5679
> 9 1.003368 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> unreachable)
> 10 1.276851 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
> 11 1.653220 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
> 12 1.663897 169.254.2.2 169.254.2.255 NBNS Registration NB
> LITTLE_GENIOUS<20>
> 13 2.003761 169.254.2.2 169.254.2.1 UDP Source port: 1216 Destination
> port:
> 5679
> 14 2.014369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> unreachable)
> 15 2.414566 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> LITTLE_GENIOUS
> 16 2.414717 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> LITTLE_GENIOUS, Workstation, Server, SQL Server, NT Workstation, Potential
> Browser
> 17 3.005616 169.254.2.2 169.254.2.1 UDP Source port: 1217 Destination
> port:
> 5679
> 18 3.008401 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> unreachable)
> 19 3.913981 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> LITTLE_GENIOUS
> 20 4.173435 169.254.2.2 169.254.2.1 UDP Source port: 1218 Destination
> port:
> 5679
> 21 4.176366 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> unreachable)
> 22 5.175914 169.254.2.2 169.254.2.1 UDP Source port: 1219 Destination
> port:
> 5679
> 23 5.177369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> unreachable)
>
> It went on like that for about 120 steps each time incrementing the source
> port, with same results.
>
> Trust you would find something out of this.
> Cheers,
> Suresh Nallan
>
>
> "Juggs Ravalia (MS)" wrote:
>
>> Yes, The Windows Mobile 5.0 Device has replaced the Serial over USB
>> implementation we had earlier with a newer device/desktop networking
>> solution built on Remote NDIS, which upon desktop connection registers as
>> a
>> new Local Area Connection. The device will then assign an IP address to
>> itself and the desktop. In your case it seems that you don't even get the
>> correct IP address assigned to the desktop - Seems like it is timing out
>> and
>> then you are gettign an Auto IP address.
>>
>> Can you cradle your device and then open a command window and after say a
>> minute or two type "ipconfig" and paste as the output? Also - in case you
>> can get us a network trace of the traffic between the device and desktop,
>> it
>> would help alot - you can use sniffers like ethereal to capture this.
>>
>> Juggs Ravalia [MSFT]
>>
>>
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>> "Little_Monster" <> wrote in
>> message
>> news:444C1AAB-F789-4F54-9970-...
>> > Hi
>> > I was able to sync my i mate JasJar successfully all these days through
>> > USB,
>> > but for some days, ActiveSync is not getting conencted. For a long
>> > time,
>> > on
>> > the AS screen the green disc was revolving & said connecting, but
>> > finally
>> > gave a msg that the device cant be connected.
>> > When I have seen the error log, it says the norton is preventing the
>> > connection. But I have done all settings for norton. I have even tried
>> > connecting JJ after disabling the norton, but activesycn doesnt work.
>> >
>> > I have checked the following based on the forum posts & Chris' website
>> > (very
>> > informative indeed), but in vain:
>> > 1. Configured norton, still doesnt work
>> > 2. Checked all services, still doesnt work
>> > 3. Disabled firewall, still doesnt work
>> > 4. Disabled norton, still doesnt work
>> > 5. exchanged USB ports, still doesnt work
>> > 6. Done soft reset, still doesnt work
>> > 7. Deleted some files, to make available Memory in device to about 11
>> > MB,
>> > still doesnt work
>> > 8. Unpaired the device from ActiveSync, still doesnt work
>> > 9. Uninstallaed & installaed Activesync, still doesnt work
>> >
>> > When I connect my device, an icon appears in the system tray trying to
>> > assign an IP address (some dots appear on network icon) and i guess its
>> > failing there. I have read in some forum/ article, that before the
>> > device
>> > connects to a PC, it assigns an IP address. Are there any settings for
>> > this?
>> > Please help.
>> > Cheers
>> > Suresh Nallan
>>
>>
>>

Hi Chris,
Is there a way to figure out which software firewall is preventing the
connection? I am sure its not Norton, as my config is perfect (I tried even
disabling norton).
Many Thanks,
Suresh Nallan

"Chris De Herrera" wrote:

> Hi,
> It sounds like a software firewall may be preventing the connection.
>
>
> --
> Chris De Herrera
> http://www.pocketpcfaq.com
> http://www.tabletpctalk.com
> http://www.pocketpctalk.com
> http://www.mobilitytalk.com
>
> ActiveSync 4.x Troubleshooting Guide -
> http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
>
> "Little_Monster" <> wrote in message
> news:196F8631-5848-4E31-8311-...
> > Hi
> > Thanks for your inputs. The following is what I got for ipconfig:
> >
> > Windows IP configuration
> >
> > Ethernet adapter Wireless Network Connection:
> > Media State ........... : Media disconnected
> >
> > Ethernet adapter Local Area Connection:
> > Media State ........... : Media disconnected
> >
> > PPP adapter Speedtouch Connection:
> > Connection-specific DNS Suffix . :
> > IP Address....................... : 87.74.48.201
> > Subnet Mask...................... : 255.255.255.255
> > Default Gateway.................. : 87.74.48.201
> >
> > Ethernet Local Area Connection 19:
> > Connection-specific DNS Suffix . :
> > IP Address....................... : 169.254.2.2
> > Subnet Mask...................... : 255.255.255.0
> > Default Gateway.................. :
> >
> > I have used ethereal and following is the result:
> >
> > 1 0.000000 169.254.2.2 169.254.2.1 UDP Source port: 1214 Destination
> > port:
> > 5679
> > 2 0.013369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > unreachable)
> > 3 0.153227 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
> > 4 0.163903 169.254.2.2 169.254.2.255 NBNS Registration NB
> > LITTLE_GENIOUS<20>
> > 5 0.567453 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
> > 6 0.903224 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
> > 7 0.913905 169.254.2.2 169.254.2.255 NBNS Registration NB
> > LITTLE_GENIOUS<20>
> > 8 1.001991 169.254.2.2 169.254.2.1 UDP Source port: 1215 Destination
> > port:
> > 5679
> > 9 1.003368 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > unreachable)
> > 10 1.276851 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
> > 11 1.653220 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
> > 12 1.663897 169.254.2.2 169.254.2.255 NBNS Registration NB
> > LITTLE_GENIOUS<20>
> > 13 2.003761 169.254.2.2 169.254.2.1 UDP Source port: 1216 Destination
> > port:
> > 5679
> > 14 2.014369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > unreachable)
> > 15 2.414566 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> > LITTLE_GENIOUS
> > 16 2.414717 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> > LITTLE_GENIOUS, Workstation, Server, SQL Server, NT Workstation, Potential
> > Browser
> > 17 3.005616 169.254.2.2 169.254.2.1 UDP Source port: 1217 Destination
> > port:
> > 5679
> > 18 3.008401 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > unreachable)
> > 19 3.913981 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> > LITTLE_GENIOUS
> > 20 4.173435 169.254.2.2 169.254.2.1 UDP Source port: 1218 Destination
> > port:
> > 5679
> > 21 4.176366 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > unreachable)
> > 22 5.175914 169.254.2.2 169.254.2.1 UDP Source port: 1219 Destination
> > port:
> > 5679
> > 23 5.177369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > unreachable)
> >
> > It went on like that for about 120 steps each time incrementing the source
> > port, with same results.
> >
> > Trust you would find something out of this.
> > Cheers,
> > Suresh Nallan
> >
> >
> > "Juggs Ravalia (MS)" wrote:
> >
> >> Yes, The Windows Mobile 5.0 Device has replaced the Serial over USB
> >> implementation we had earlier with a newer device/desktop networking
> >> solution built on Remote NDIS, which upon desktop connection registers as
> >> a
> >> new Local Area Connection. The device will then assign an IP address to
> >> itself and the desktop. In your case it seems that you don't even get the
> >> correct IP address assigned to the desktop - Seems like it is timing out
> >> and
> >> then you are gettign an Auto IP address.
> >>
> >> Can you cradle your device and then open a command window and after say a
> >> minute or two type "ipconfig" and paste as the output? Also - in case you
> >> can get us a network trace of the traffic between the device and desktop,
> >> it
> >> would help alot - you can use sniffers like ethereal to capture this.
> >>
> >> Juggs Ravalia [MSFT]
> >>
> >>
> >> This posting is provided "AS IS" with no warranties, and confers no
> >> rights.
> >>
> >> "Little_Monster" <> wrote in
> >> message
> >> news:444C1AAB-F789-4F54-9970-...
> >> > Hi
> >> > I was able to sync my i mate JasJar successfully all these days through
> >> > USB,
> >> > but for some days, ActiveSync is not getting conencted. For a long
> >> > time,
> >> > on
> >> > the AS screen the green disc was revolving & said connecting, but
> >> > finally
> >> > gave a msg that the device cant be connected.
> >> > When I have seen the error log, it says the norton is preventing the
> >> > connection. But I have done all settings for norton. I have even tried
> >> > connecting JJ after disabling the norton, but activesycn doesnt work.
> >> >
> >> > I have checked the following based on the forum posts & Chris' website
> >> > (very
> >> > informative indeed), but in vain:
> >> > 1. Configured norton, still doesnt work
> >> > 2. Checked all services, still doesnt work
> >> > 3. Disabled firewall, still doesnt work
> >> > 4. Disabled norton, still doesnt work
> >> > 5. exchanged USB ports, still doesnt work
> >> > 6. Done soft reset, still doesnt work
> >> > 7. Deleted some files, to make available Memory in device to about 11
> >> > MB,
> >> > still doesnt work
> >> > 8. Unpaired the device from ActiveSync, still doesnt work
> >> > 9. Uninstallaed & installaed Activesync, still doesnt work
> >> >
> >> > When I connect my device, an icon appears in the system tray trying to
> >> > assign an IP address (some dots appear on network icon) and i guess its
> >> > failing there. I have read in some forum/ article, that before the
> >> > device
> >> > connects to a PC, it assigns an IP address. Are there any settings for
> >> > this?
> >> > Please help.
> >> > Cheers
> >> > Suresh Nallan
> >>
> >>
> >>
>
>
>

Hi... Some one please help me... I am being paranoid. What if my contacts
gets erased? I need to sync its been almost a month, I have not synced by
device...

Suresh Nallan

"Little_Monster" wrote:

> Hi Chris,
> Is there a way to figure out which software firewall is preventing the
> connection? I am sure its not Norton, as my config is perfect (I tried even
> disabling norton).
> Many Thanks,
> Suresh Nallan
>
> "Chris De Herrera" wrote:
>
> > Hi,
> > It sounds like a software firewall may be preventing the connection.
> >
> >
> > --
> > Chris De Herrera
> > http://www.pocketpcfaq.com
> > http://www.tabletpctalk.com
> > http://www.pocketpctalk.com
> > http://www.mobilitytalk.com
> >
> > ActiveSync 4.x Troubleshooting Guide -
> > http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
> >
> > "Little_Monster" <> wrote in message
> > news:196F8631-5848-4E31-8311-...
> > > Hi
> > > Thanks for your inputs. The following is what I got for ipconfig:
> > >
> > > Windows IP configuration
> > >
> > > Ethernet adapter Wireless Network Connection:
> > > Media State ........... : Media disconnected
> > >
> > > Ethernet adapter Local Area Connection:
> > > Media State ........... : Media disconnected
> > >
> > > PPP adapter Speedtouch Connection:
> > > Connection-specific DNS Suffix . :
> > > IP Address....................... : 87.74.48.201
> > > Subnet Mask...................... : 255.255.255.255
> > > Default Gateway.................. : 87.74.48.201
> > >
> > > Ethernet Local Area Connection 19:
> > > Connection-specific DNS Suffix . :
> > > IP Address....................... : 169.254.2.2
> > > Subnet Mask...................... : 255.255.255.0
> > > Default Gateway.................. :
> > >
> > > I have used ethereal and following is the result:
> > >
> > > 1 0.000000 169.254.2.2 169.254.2.1 UDP Source port: 1214 Destination
> > > port:
> > > 5679
> > > 2 0.013369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > > unreachable)
> > > 3 0.153227 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
> > > 4 0.163903 169.254.2.2 169.254.2.255 NBNS Registration NB
> > > LITTLE_GENIOUS<20>
> > > 5 0.567453 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
> > > 6 0.903224 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
> > > 7 0.913905 169.254.2.2 169.254.2.255 NBNS Registration NB
> > > LITTLE_GENIOUS<20>
> > > 8 1.001991 169.254.2.2 169.254.2.1 UDP Source port: 1215 Destination
> > > port:
> > > 5679
> > > 9 1.003368 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > > unreachable)
> > > 10 1.276851 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
> > > 11 1.653220 169.254.2.2 169.254.2.255 NBNS Registration NB WORKGROUP<1e>
> > > 12 1.663897 169.254.2.2 169.254.2.255 NBNS Registration NB
> > > LITTLE_GENIOUS<20>
> > > 13 2.003761 169.254.2.2 169.254.2.1 UDP Source port: 1216 Destination
> > > port:
> > > 5679
> > > 14 2.014369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > > unreachable)
> > > 15 2.414566 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> > > LITTLE_GENIOUS
> > > 16 2.414717 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> > > LITTLE_GENIOUS, Workstation, Server, SQL Server, NT Workstation, Potential
> > > Browser
> > > 17 3.005616 169.254.2.2 169.254.2.1 UDP Source port: 1217 Destination
> > > port:
> > > 5679
> > > 18 3.008401 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > > unreachable)
> > > 19 3.913981 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> > > LITTLE_GENIOUS
> > > 20 4.173435 169.254.2.2 169.254.2.1 UDP Source port: 1218 Destination
> > > port:
> > > 5679
> > > 21 4.176366 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > > unreachable)
> > > 22 5.175914 169.254.2.2 169.254.2.1 UDP Source port: 1219 Destination
> > > port:
> > > 5679
> > > 23 5.177369 169.254.2.1 169.254.2.2 ICMP Destination unreachable (port
> > > unreachable)
> > >
> > > It went on like that for about 120 steps each time incrementing the source
> > > port, with same results.
> > >
> > > Trust you would find something out of this.
> > > Cheers,
> > > Suresh Nallan
> > >
> > >
> > > "Juggs Ravalia (MS)" wrote:
> > >
> > >> Yes, The Windows Mobile 5.0 Device has replaced the Serial over USB
> > >> implementation we had earlier with a newer device/desktop networking
> > >> solution built on Remote NDIS, which upon desktop connection registers as
> > >> a
> > >> new Local Area Connection. The device will then assign an IP address to
> > >> itself and the desktop. In your case it seems that you don't even get the
> > >> correct IP address assigned to the desktop - Seems like it is timing out
> > >> and
> > >> then you are gettign an Auto IP address.
> > >>
> > >> Can you cradle your device and then open a command window and after say a
> > >> minute or two type "ipconfig" and paste as the output? Also - in case you
> > >> can get us a network trace of the traffic between the device and desktop,
> > >> it
> > >> would help alot - you can use sniffers like ethereal to capture this.
> > >>
> > >> Juggs Ravalia [MSFT]
> > >>
> > >>
> > >> This posting is provided "AS IS" with no warranties, and confers no
> > >> rights.
> > >>
> > >> "Little_Monster" <> wrote in
> > >> message
> > >> news:444C1AAB-F789-4F54-9970-...
> > >> > Hi
> > >> > I was able to sync my i mate JasJar successfully all these days through
> > >> > USB,
> > >> > but for some days, ActiveSync is not getting conencted. For a long
> > >> > time,
> > >> > on
> > >> > the AS screen the green disc was revolving & said connecting, but
> > >> > finally
> > >> > gave a msg that the device cant be connected.
> > >> > When I have seen the error log, it says the norton is preventing the
> > >> > connection. But I have done all settings for norton. I have even tried
> > >> > connecting JJ after disabling the norton, but activesycn doesnt work.
> > >> >
> > >> > I have checked the following based on the forum posts & Chris' website
> > >> > (very
> > >> > informative indeed), but in vain:
> > >> > 1. Configured norton, still doesnt work
> > >> > 2. Checked all services, still doesnt work
> > >> > 3. Disabled firewall, still doesnt work
> > >> > 4. Disabled norton, still doesnt work
> > >> > 5. exchanged USB ports, still doesnt work
> > >> > 6. Done soft reset, still doesnt work
> > >> > 7. Deleted some files, to make available Memory in device to about 11
> > >> > MB,
> > >> > still doesnt work
> > >> > 8. Unpaired the device from ActiveSync, still doesnt work
> > >> > 9. Uninstallaed & installaed Activesync, still doesnt work
> > >> >
> > >> > When I connect my device, an icon appears in the system tray trying to
> > >> > assign an IP address (some dots appear on network icon) and i guess its
> > >> > failing there. I have read in some forum/ article, that before the
> > >> > device
> > >> > connects to a PC, it assigns an IP address. Are there any settings for
> > >> > this?
> > >> > Please help.
> > >> > Cheers
> > >> > Suresh Nallan
> > >>
> > >>
> > >>
> >
> >
> >

Please don't hijack other people's threads.

Delete the partnership before you connect the device. The only way you'd
lose your contacts on the desktop is if you deleted the contact on the
device before connecting it.

Paul T.

"Little_Monster" <> wrote in message
news:42DA4FB5-FBAF-4865-B2C6-...
> Hi... Some one please help me... I am being paranoid. What if my contacts
> gets erased? I need to sync its been almost a month, I have not synced by
> device...
>
> Suresh Nallan
>
> "Little_Monster" wrote:
>
>> Hi Chris,
>> Is there a way to figure out which software firewall is preventing the
>> connection? I am sure its not Norton, as my config is perfect (I tried
>> even
>> disabling norton).
>> Many Thanks,
>> Suresh Nallan
>>
>> "Chris De Herrera" wrote:
>>
>> > Hi,
>> > It sounds like a software firewall may be preventing the connection.
>> >
>> >
>> > --
>> > Chris De Herrera
>> > http://www.pocketpcfaq.com
>> > http://www.tabletpctalk.com
>> > http://www.pocketpctalk.com
>> > http://www.mobilitytalk.com
>> >
>> > ActiveSync 4.x Troubleshooting Guide -
>> > http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
>> >
>> > "Little_Monster" <> wrote in
>> > message
>> > news:196F8631-5848-4E31-8311-...
>> > > Hi
>> > > Thanks for your inputs. The following is what I got for ipconfig:
>> > >
>> > > Windows IP configuration
>> > >
>> > > Ethernet adapter Wireless Network Connection:
>> > > Media State ........... : Media disconnected
>> > >
>> > > Ethernet adapter Local Area Connection:
>> > > Media State ........... : Media disconnected
>> > >
>> > > PPP adapter Speedtouch Connection:
>> > > Connection-specific DNS Suffix . :
>> > > IP Address....................... : 87.74.48.201
>> > > Subnet Mask...................... : 255.255.255.255
>> > > Default Gateway.................. : 87.74.48.201
>> > >
>> > > Ethernet Local Area Connection 19:
>> > > Connection-specific DNS Suffix . :
>> > > IP Address....................... : 169.254.2.2
>> > > Subnet Mask...................... : 255.255.255.0
>> > > Default Gateway.................. :
>> > >
>> > > I have used ethereal and following is the result:
>> > >
>> > > 1 0.000000 169.254.2.2 169.254.2.1 UDP Source port: 1214
>> > > Destination
>> > > port:
>> > > 5679
>> > > 2 0.013369 169.254.2.1 169.254.2.2 ICMP Destination unreachable
>> > > (port
>> > > unreachable)
>> > > 3 0.153227 169.254.2.2 169.254.2.255 NBNS Registration NB
>> > > WORKGROUP<1e>
>> > > 4 0.163903 169.254.2.2 169.254.2.255 NBNS Registration NB
>> > > LITTLE_GENIOUS<20>
>> > > 5 0.567453 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
>> > > 6 0.903224 169.254.2.2 169.254.2.255 NBNS Registration NB
>> > > WORKGROUP<1e>
>> > > 7 0.913905 169.254.2.2 169.254.2.255 NBNS Registration NB
>> > > LITTLE_GENIOUS<20>
>> > > 8 1.001991 169.254.2.2 169.254.2.1 UDP Source port: 1215
>> > > Destination
>> > > port:
>> > > 5679
>> > > 9 1.003368 169.254.2.1 169.254.2.2 ICMP Destination unreachable
>> > > (port
>> > > unreachable)
>> > > 10 1.276851 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
>> > > 11 1.653220 169.254.2.2 169.254.2.255 NBNS Registration NB
>> > > WORKGROUP<1e>
>> > > 12 1.663897 169.254.2.2 169.254.2.255 NBNS Registration NB
>> > > LITTLE_GENIOUS<20>
>> > > 13 2.003761 169.254.2.2 169.254.2.1 UDP Source port: 1216
>> > > Destination
>> > > port:
>> > > 5679
>> > > 14 2.014369 169.254.2.1 169.254.2.2 ICMP Destination unreachable
>> > > (port
>> > > unreachable)
>> > > 15 2.414566 169.254.2.2 169.254.2.255 BROWSER Request Announcement
>> > > LITTLE_GENIOUS
>> > > 16 2.414717 169.254.2.2 169.254.2.255 BROWSER Request Announcement
>> > > LITTLE_GENIOUS, Workstation, Server, SQL Server, NT Workstation,
>> > > Potential
>> > > Browser
>> > > 17 3.005616 169.254.2.2 169.254.2.1 UDP Source port: 1217
>> > > Destination
>> > > port:
>> > > 5679
>> > > 18 3.008401 169.254.2.1 169.254.2.2 ICMP Destination unreachable
>> > > (port
>> > > unreachable)
>> > > 19 3.913981 169.254.2.2 169.254.2.255 BROWSER Request Announcement
>> > > LITTLE_GENIOUS
>> > > 20 4.173435 169.254.2.2 169.254.2.1 UDP Source port: 1218
>> > > Destination
>> > > port:
>> > > 5679
>> > > 21 4.176366 169.254.2.1 169.254.2.2 ICMP Destination unreachable
>> > > (port
>> > > unreachable)
>> > > 22 5.175914 169.254.2.2 169.254.2.1 UDP Source port: 1219
>> > > Destination
>> > > port:
>> > > 5679
>> > > 23 5.177369 169.254.2.1 169.254.2.2 ICMP Destination unreachable
>> > > (port
>> > > unreachable)
>> > >
>> > > It went on like that for about 120 steps each time incrementing the
>> > > source
>> > > port, with same results.
>> > >
>> > > Trust you would find something out of this.
>> > > Cheers,
>> > > Suresh Nallan
>> > >
>> > >
>> > > "Juggs Ravalia (MS)" wrote:
>> > >
>> > >> Yes, The Windows Mobile 5.0 Device has replaced the Serial over USB
>> > >> implementation we had earlier with a newer device/desktop networking
>> > >> solution built on Remote NDIS, which upon desktop connection
>> > >> registers as
>> > >> a
>> > >> new Local Area Connection. The device will then assign an IP address
>> > >> to
>> > >> itself and the desktop. In your case it seems that you don't even
>> > >> get the
>> > >> correct IP address assigned to the desktop - Seems like it is timing
>> > >> out
>> > >> and
>> > >> then you are gettign an Auto IP address.
>> > >>
>> > >> Can you cradle your device and then open a command window and after
>> > >> say a
>> > >> minute or two type "ipconfig" and paste as the output? Also - in
>> > >> case you
>> > >> can get us a network trace of the traffic between the device and
>> > >> desktop,
>> > >> it
>> > >> would help alot - you can use sniffers like ethereal to capture
>> > >> this.
>> > >>
>> > >> Juggs Ravalia [MSFT]
>> > >>
>> > >>
>> > >> This posting is provided "AS IS" with no warranties, and confers no
>> > >> rights.
>> > >>
>> > >> "Little_Monster" <> wrote in
>> > >> message
>> > >> news:444C1AAB-F789-4F54-9970-...
>> > >> > Hi
>> > >> > I was able to sync my i mate JasJar successfully all these days
>> > >> > through
>> > >> > USB,
>> > >> > but for some days, ActiveSync is not getting conencted. For a long
>> > >> > time,
>> > >> > on
>> > >> > the AS screen the green disc was revolving & said connecting, but
>> > >> > finally
>> > >> > gave a msg that the device cant be connected.
>> > >> > When I have seen the error log, it says the norton is preventing
>> > >> > the
>> > >> > connection. But I have done all settings for norton. I have even
>> > >> > tried
>> > >> > connecting JJ after disabling the norton, but activesycn doesnt
>> > >> > work.
>> > >> >
>> > >> > I have checked the following based on the forum posts & Chris'
>> > >> > website
>> > >> > (very
>> > >> > informative indeed), but in vain:
>> > >> > 1. Configured norton, still doesnt work
>> > >> > 2. Checked all services, still doesnt work
>> > >> > 3. Disabled firewall, still doesnt work
>> > >> > 4. Disabled norton, still doesnt work
>> > >> > 5. exchanged USB ports, still doesnt work
>> > >> > 6. Done soft reset, still doesnt work
>> > >> > 7. Deleted some files, to make available Memory in device to about
>> > >> > 11
>> > >> > MB,
>> > >> > still doesnt work
>> > >> > 8. Unpaired the device from ActiveSync, still doesnt work
>> > >> > 9. Uninstallaed & installaed Activesync, still doesnt work
>> > >> >
>> > >> > When I connect my device, an icon appears in the system tray
>> > >> > trying to
>> > >> > assign an IP address (some dots appear on network icon) and i
>> > >> > guess its
>> > >> > failing there. I have read in some forum/ article, that before the
>> > >> > device
>> > >> > connects to a PC, it assigns an IP address. Are there any settings
>> > >> > for
>> > >> > this?
>> > >> > Please help.
>> > >> > Cheers
>> > >> > Suresh Nallan
>> > >>
>> > >>
>> > >>
>> >
>> >
>> >

>> Please don't hijack other people's threads. <<

Pears that this was his thread as he is the op according to my reader ;-)

I would add that if the contacts and other data are as important as you
indicate, it would be worth it to run a backup to memory card before you
begin even if you have to purchase a backup utility.

Unfortunately, wm5 does not allow selecting more than a single contact
as with earlier os's you can select all and "beam" them to another pda
or pc/laptop with ir or bluetooth.

Beverly Howard [MS MVP-Mobile Devices]

Pretty sure the JasJar had "XBackup" in the start/programs folder... be
worth taking a look.

Beverly Howard [MS MVP-Mobile Devices]

Paul - I guess you havent seen the entire post are you are confused.
Its my post and I rightfully added another to my original post. There is no
hijacking involved.

One issue is protecting the data, but my major concern is about AS not
getting paired.
Thanks,
Suresh Nallan


"Paul G. Tobey [eMVP]" wrote:

> Please don't hijack other people's threads.
>
> Delete the partnership before you connect the device. The only way you'd
> lose your contacts on the desktop is if you deleted the contact on the
> device before connecting it.
>
> Paul T.
>
> "Little_Monster" <> wrote in message
> news:42DA4FB5-FBAF-4865-B2C6-...
> > Hi... Some one please help me... I am being paranoid. What if my contacts
> > gets erased? I need to sync its been almost a month, I have not synced by
> > device...
> >
> > Suresh Nallan
> >
> > "Little_Monster" wrote:
> >
> >> Hi Chris,
> >> Is there a way to figure out which software firewall is preventing the
> >> connection? I am sure its not Norton, as my config is perfect (I tried
> >> even
> >> disabling norton).
> >> Many Thanks,
> >> Suresh Nallan
> >>
> >> "Chris De Herrera" wrote:
> >>
> >> > Hi,
> >> > It sounds like a software firewall may be preventing the connection.
> >> >
> >> >
> >> > --
> >> > Chris De Herrera
> >> > http://www.pocketpcfaq.com
> >> > http://www.tabletpctalk.com
> >> > http://www.pocketpctalk.com
> >> > http://www.mobilitytalk.com
> >> >
> >> > ActiveSync 4.x Troubleshooting Guide -
> >> > http://www.pocketpcfaq.com/faqs/acti...shoot-as4x.htm
> >> >
> >> > "Little_Monster" <> wrote in
> >> > message
> >> > news:196F8631-5848-4E31-8311-...
> >> > > Hi
> >> > > Thanks for your inputs. The following is what I got for ipconfig:
> >> > >
> >> > > Windows IP configuration
> >> > >
> >> > > Ethernet adapter Wireless Network Connection:
> >> > > Media State ........... : Media disconnected
> >> > >
> >> > > Ethernet adapter Local Area Connection:
> >> > > Media State ........... : Media disconnected
> >> > >
> >> > > PPP adapter Speedtouch Connection:
> >> > > Connection-specific DNS Suffix . :
> >> > > IP Address....................... : 87.74.48.201
> >> > > Subnet Mask...................... : 255.255.255.255
> >> > > Default Gateway.................. : 87.74.48.201
> >> > >
> >> > > Ethernet Local Area Connection 19:
> >> > > Connection-specific DNS Suffix . :
> >> > > IP Address....................... : 169.254.2.2
> >> > > Subnet Mask...................... : 255.255.255.0
> >> > > Default Gateway.................. :
> >> > >
> >> > > I have used ethereal and following is the result:
> >> > >
> >> > > 1 0.000000 169.254.2.2 169.254.2.1 UDP Source port: 1214
> >> > > Destination
> >> > > port:
> >> > > 5679
> >> > > 2 0.013369 169.254.2.1 169.254.2.2 ICMP Destination unreachable
> >> > > (port
> >> > > unreachable)
> >> > > 3 0.153227 169.254.2.2 169.254.2.255 NBNS Registration NB
> >> > > WORKGROUP<1e>
> >> > > 4 0.163903 169.254.2.2 169.254.2.255 NBNS Registration NB
> >> > > LITTLE_GENIOUS<20>
> >> > > 5 0.567453 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
> >> > > 6 0.903224 169.254.2.2 169.254.2.255 NBNS Registration NB
> >> > > WORKGROUP<1e>
> >> > > 7 0.913905 169.254.2.2 169.254.2.255 NBNS Registration NB
> >> > > LITTLE_GENIOUS<20>
> >> > > 8 1.001991 169.254.2.2 169.254.2.1 UDP Source port: 1215
> >> > > Destination
> >> > > port:
> >> > > 5679
> >> > > 9 1.003368 169.254.2.1 169.254.2.2 ICMP Destination unreachable
> >> > > (port
> >> > > unreachable)
> >> > > 10 1.276851 169.254.2.2 239.255.255.250 SSDP M-SEARCH * HTTP/1.1
> >> > > 11 1.653220 169.254.2.2 169.254.2.255 NBNS Registration NB
> >> > > WORKGROUP<1e>
> >> > > 12 1.663897 169.254.2.2 169.254.2.255 NBNS Registration NB
> >> > > LITTLE_GENIOUS<20>
> >> > > 13 2.003761 169.254.2.2 169.254.2.1 UDP Source port: 1216
> >> > > Destination
> >> > > port:
> >> > > 5679
> >> > > 14 2.014369 169.254.2.1 169.254.2.2 ICMP Destination unreachable
> >> > > (port
> >> > > unreachable)
> >> > > 15 2.414566 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> >> > > LITTLE_GENIOUS
> >> > > 16 2.414717 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> >> > > LITTLE_GENIOUS, Workstation, Server, SQL Server, NT Workstation,
> >> > > Potential
> >> > > Browser
> >> > > 17 3.005616 169.254.2.2 169.254.2.1 UDP Source port: 1217
> >> > > Destination
> >> > > port:
> >> > > 5679
> >> > > 18 3.008401 169.254.2.1 169.254.2.2 ICMP Destination unreachable
> >> > > (port
> >> > > unreachable)
> >> > > 19 3.913981 169.254.2.2 169.254.2.255 BROWSER Request Announcement
> >> > > LITTLE_GENIOUS
> >> > > 20 4.173435 169.254.2.2 169.254.2.1 UDP Source port: 1218
> >> > > Destination
> >> > > port:
> >> > > 5679
> >> > > 21 4.176366 169.254.2.1 169.254.2.2 ICMP Destination unreachable
> >> > > (port
> >> > > unreachable)
> >> > > 22 5.175914 169.254.2.2 169.254.2.1 UDP Source port: 1219
> >> > > Destination
> >> > > port:
> >> > > 5679
> >> > > 23 5.177369 169.254.2.1 169.254.2.2 ICMP Destination unreachable
> >> > > (port
> >> > > unreachable)
> >> > >
> >> > > It went on like that for about 120 steps each time incrementing the
> >> > > source
> >> > > port, with same results.
> >> > >
> >> > > Trust you would find something out of this.
> >> > > Cheers,
> >> > > Suresh Nallan
> >> > >
> >> > >
> >> > > "Juggs Ravalia (MS)" wrote:
> >> > >
> >> > >> Yes, The Windows Mobile 5.0 Device has replaced the Serial over USB
> >> > >> implementation we had earlier with a newer device/desktop networking
> >> > >> solution built on Remote NDIS, which upon desktop connection
> >> > >> registers as
> >> > >> a
> >> > >> new Local Area Connection. The device will then assign an IP address
> >> > >> to
> >> > >> itself and the desktop. In your case it seems that you don't even
> >> > >> get the
> >> > >> correct IP address assigned to the desktop - Seems like it is timing
> >> > >> out
> >> > >> and
> >> > >> then you are gettign an Auto IP address.
> >> > >>
> >> > >> Can you cradle your device and then open a command window and after
> >> > >> say a
> >> > >> minute or two type "ipconfig" and paste as the output? Also - in
> >> > >> case you
> >> > >> can get us a network trace of the traffic between the device and
> >> > >> desktop,
> >> > >> it
> >> > >> would help alot - you can use sniffers like ethereal to capture
> >> > >> this.
> >> > >>
> >> > >> Juggs Ravalia [MSFT]
> >> > >>
> >> > >>
> >> > >> This posting is provided "AS IS" with no warranties, and confers no
> >> > >> rights.
> >> > >>
> >> > >> "Little_Monster" <> wrote in
> >> > >> message
> >> > >> news:444C1AAB-F789-4F54-9970-...
> >> > >> > Hi
> >> > >> > I was able to sync my i mate JasJar successfully all these days
> >> > >> > through
> >> > >> > USB,
> >> > >> > but for some days, ActiveSync is not getting conencted. For a long
> >> > >> > time,
> >> > >> > on
> >> > >> > the AS screen the green disc was revolving & said connecting, but
> >> > >> > finally
> >> > >> > gave a msg that the device cant be connected.
> >> > >> > When I have seen the error log, it says the norton is preventing
> >> > >> > the
> >> > >> > connection. But I have done all settings for norton. I have even
> >> > >> > tried
> >> > >> > connecting JJ after disabling the norton, but activesycn doesnt
> >> > >> > work.
> >> > >> >
> >> > >> > I have checked the following based on the forum posts & Chris'
> >> > >> > website
> >> > >> > (very
> >> > >> > informative indeed), but in vain:
> >> > >> > 1. Configured norton, still doesnt work
> >> > >> > 2. Checked all services, still doesnt work
> >> > >> > 3. Disabled firewall, still doesnt work
> >> > >> > 4. Disabled norton, still doesnt work
> >> > >> > 5. exchanged USB ports, still doesnt work
> >> > >> > 6. Done soft reset, still doesnt work
> >> > >> > 7. Deleted some files, to make available Memory in device to about
> >> > >> > 11
> >> > >> > MB,
> >> > >> > still doesnt work
> >> > >> > 8. Unpaired the device from ActiveSync, still doesnt work
> >> > >> > 9. Uninstallaed & installaed Activesync, still doesnt work
> >> > >> >
> >> > >> > When I connect my device, an icon appears in the system tray
> >> > >> > trying to
> >> > >> > assign an IP address (some dots appear on network icon) and i
> >> > >> > guess its
> >> > >> > failing there. I have read in some forum/ article, that before the
> >> > >> > device
> >> > >> > connects to a PC, it assigns an IP address. Are there any settings
> >> > >> > for
> >> > >> > this?
> >> > >> > Please help.
> >> > >> > Cheers
> >> > >> > Suresh Nallan
> >> > >>
> >> > >>
> >> > >>
> >> >
> >> >
> >> >
>
>
>