Error 1068
One Reason for the error "Error 1068: The Dependency Service or Group Failed To Start" can be: Changed in the path of service exe in harddisk.
Example: if service exe location is (service properties shows) :: c:\Program files\xyz\abc\my_service.exe and if we change "xyz" to "wxy" folder and try to restart the service. it will give the above error.
Fixing this issue is quite simple. I had the same issue myself and after a LOT of research, I found the following steps extremely simple and it fixes the issue immediately.
1. Go to Start > Run and type in services.msc then press Enter.
2. In the window that opens find "Print Spooler" on the right
3. Right-click "Print Spooler" and select "Properties".
4. Click on the "Recovery" tab and change all 3 drop-down boxes to "Restart The Service".
5. Make sure the 2 text boxes underneath say "1" in them.
6. Click Ok until you are back at the Services window, close it and you're good to go.
7. Go back into the properties of the "Print Spooler" tab and be sure to click Start to restart the Print Spooler service and it will restart the service immediately.
You're all set! Now when ever your Print Spooler craps out, it will automatically reset itself.
More input and advice:
--
Peter
Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.
<> wrote in message news:0cec3a0b-824b-4a38-8c90-...
> I'm having trouble adding my printer ( Canon all in one Photo Printer
> - PIXMA MP480) to my Notebook ( HP Pavilion dv6775us Notebook PC). I
> keep getting a message that reads: "windows can't open add printer.
> The local print spooler service is not runnig please restart the
> spooler or restart the machine".. Needless to say i have resarted the
> machine and I still get the same message. Prior to trying to add
> this
> printer I had no printer and a friend of mine gave me his old printer
> ( LEXMARK Z645) i tired to add this printer while i waited on my
> Canon
> printer to come to me. When i ran the install cd for the LEXMARK i
> didn't notice it was only XP compatible. After running the software i
> was prompted by a message that stated this software was not
> compatible
> with my operating current Operating system. My friend who says he
> know more about PC than I had me download the Vista drivers for the
> LEXMARK printer from the Mfg website. When I ran the download the
> print queue seemed to recognized the printer but then later displayed
> message that the installation had failed. after unistalling and
> reinstalling the software and the file downloaded from LEXMARK i
> still
> had the same problem. I was so frustrated that I didn't now what to
> do. The print queue seemed to be stuck with a test job that the
> printer had ask me to do and i could not stop it or resume it. Some
> how my friend got it to delete the job but then my print queue
> dissappeared. So i figured It was a error due to the LEXMARK printer
> being so old. I left it alone, now i have my new Canon printer which
> is Vista compatible and I tired running the software. I got message
> window that read installation no complete and then i got the window
> that read: windows can't open add printer.The local print spooler
> service is not runnig please restart the spooler or restart the
> machine. I tried restarting it and i went through the Services
> program
> to try and restart the spooler but it then gave this error message:
> Error 1068 the dependency service or group failed to start.
>
> I don't have any Printer listed in my printers folder and the spooler
> is nowhere to be found. I don't know what to do. I tried searching
> through the windows message boards and well i'm frustrated because no
> one seems to have the right answer for me. Most of the message i
> found
> were for a similar problem with XP but none for Vista. I can now
> officially say I hate VISTA!! and well i really hope someone can help
> me cuz i'm out of ideas.
>
>
> Oh yeah i have Windows Vista Home Premuim 32 bit.
|
Similar Threads
Linear Mode
