Net.Frame Update

i installed it 7 times it is comming back over and over again

"Petra" wrote:

> i installed it 7 times it is comming back over and over again

look in the newsgroup for George's
SOLUTION to the .net "failed to install" update

"Petra" <> wrote in message
news:C86D3EE2-AB4F-45C4-86A3-...
>i installed it 7 times it is comming back over and over again

Would you be able to grab a verbose log for the patch that is failing to
install for you ?

Thanks,
Jamshed



"Petra" wrote:

> i installed it 7 times it is comming back over and over again

Try this!

Thanks to Jim and George!

billhardin22

Follow the direction in this note found in the Windows Update news group.
There were a lot of people affected by this problem:

Subject: Re: .NET Updates failed 7/12/2007 1:36 PM PST

By: georgef In: microsoft.public.windowsupdate

Here is EXACTLY what you do to solve this problem for Windows XP 32
bit. If you happen to have a rarer 64 bit version, server OS, or
SOMETHING else follow the same general instructions but get the
version of the files appropriate for your system but first, Microsoft
has ****ed me off beyond belief. I looked in my log and this same
thing happened 6/2006...thanks MSFT for torturing us again this year.
I thought it was a familiar feeling...nice branding...this is a huge
humiliation for their .NET team in my opinion or perhaps we should
start calling them the .NOT team...anyway....

Steps:
1) Go to the control panel and select the add/remove software tool
then TRY and remove everything with .NET in the name. If you can
remove everything go to step 3. If you cannot remove everything go to
step 2.

2) Go and download the windows installer clean up tool at:
http://support.microsoft.com/kb/290301

run the windows installer clean up tool and BE CAREFUL to only select
the .NET items from the list and remove them. Note: this will likely
leave the names as "dead links" in the Add/Remove Software list
(ahhh ...Microsoft thoroughness at its best) but not to worry they
will do no harm and will get fixed when we finish. It's possible to
clean them up but let's stay out of the registry :-)

3) Go and get the file "dotnetfx.exe" this is ".NET 1.1" from:

http://www.microsoft.com/downloads/d...displaylang=en

install it.

4) Go and get the file "NDP1.1sp1-KB867460-X86.exe" this is the ".NET
1.1 service pack 1" from: my personal website (JUST KIDDING,
RELAX...get everything of course from a microsoft.com domain)

http://www.microsoft.com/downloads/d...displaylang=en

install it.

5) Install the SECURITY patch, the dreaded KB928366, we have all grown
to hate. You can install it from the Windows Update program (be sure
to ONLY select the KB928366 patch and NOTHING else, we dont want to
put back 2.0 or 3.0 yet). It's OK go ahead and click ...it will be
alright...you can do it...it's just one more time... :-)

6) Re-run the Windows Update and you can add back in .NET 2.0 and 3.0

7) Post to thank me...

Now WHY hasn't Microsoft posted instructions yet? .... What is UP?!

Good night!

George



"" wrote:

> There seems to be a problem many are having with the most recent critical
> security updates.
>
> Automatic Update failed to install these updates on my PC over a dozen times.
>
> After finally installing now I receive the error message that Microsoft.NET
> Framework v1.1.4322 Update is preventing my PC from entering standby mode.
>
> Anyone have a solution?
>
> This has never happened to me before.
Did this



"Petra" wrote:

> i installed it 7 times it is comming back over and over again

Start a free Windows Update support incident request:
https://support.microsoft.com/oas/de...spx?gprid=6527

Tip: Temporarily disable real-time protection by your anti-virus and/or
anti-spyware applications (e.g., CounterSpy, Spysweeper, Spybot, AVG
Anti-Spyware) and/or any third-party firewall (e.g., ZA).
--
~Robear Dyer (PA Bear)
MS MVP-Windows (IE, OE, Security, Shell/User)
AumHa VSOP & Admin; DTS-L.org

Petra wrote:
> i installed it 7 times it is comming back over and over again

Well, I decided to give the below a go.
Right now, I am hung up, on installing the NDP1 file. Says it does not
exist, verify that the patch exists....



--
Don


""
< m> wrote in message
news:7CA3F3EF-9586-4663-9939-...
> Try this!
>
> Thanks to Jim and George!
>
> billhardin22
>
> Follow the direction in this note found in the Windows Update news group.
> There were a lot of people affected by this problem:
>
> Subject: Re: .NET Updates failed 7/12/2007 1:36 PM PST
>
> By: georgef In: microsoft.public.windowsupdate
>
> Here is EXACTLY what you do to solve this problem for Windows XP 32
> bit. If you happen to have a rarer 64 bit version, server OS, or
> SOMETHING else follow the same general instructions but get the
> version of the files appropriate for your system but first, Microsoft
> has ****ed me off beyond belief. I looked in my log and this same
> thing happened 6/2006...thanks MSFT for torturing us again this year.
> I thought it was a familiar feeling...nice branding...this is a huge
> humiliation for their .NET team in my opinion or perhaps we should
> start calling them the .NOT team...anyway....
>
> Steps:
> 1) Go to the control panel and select the add/remove software tool
> then TRY and remove everything with .NET in the name. If you can
> remove everything go to step 3. If you cannot remove everything go to
> step 2.
>
> 2) Go and download the windows installer clean up tool at:
> http://support.microsoft.com/kb/290301
>
> run the windows installer clean up tool and BE CAREFUL to only select
> the .NET items from the list and remove them. Note: this will likely
> leave the names as "dead links" in the Add/Remove Software list
> (ahhh ...Microsoft thoroughness at its best) but not to worry they
> will do no harm and will get fixed when we finish. It's possible to
> clean them up but let's stay out of the registry :-)
>
> 3) Go and get the file "dotnetfx.exe" this is ".NET 1.1" from:
>
> http://www.microsoft.com/downloads/d...displaylang=en
>
> install it.
>
> 4) Go and get the file "NDP1.1sp1-KB867460-X86.exe" this is the ".NET
> 1.1 service pack 1" from: my personal website (JUST KIDDING,
> RELAX...get everything of course from a microsoft.com domain)
>
> http://www.microsoft.com/downloads/d...displaylang=en
>
> install it.
>
> 5) Install the SECURITY patch, the dreaded KB928366, we have all grown
> to hate. You can install it from the Windows Update program (be sure
> to ONLY select the KB928366 patch and NOTHING else, we dont want to
> put back 2.0 or 3.0 yet). It's OK go ahead and click ...it will be
> alright...you can do it...it's just one more time... :-)
>
> 6) Re-run the Windows Update and you can add back in .NET 2.0 and 3.0
>
> 7) Post to thank me...
>
> Now WHY hasn't Microsoft posted instructions yet? .... What is UP?!
>
> Good night!
>
> George
>
>
>
> "" wrote:
>
>> There seems to be a problem many are having with the most recent critical
>> security updates.
>>
>> Automatic Update failed to install these updates on my PC over a dozen
>> times.
>>
>> After finally installing now I receive the error message that
>> Microsoft.NET
>> Framework v1.1.4322 Update is preventing my PC from entering standby
>> mode.
>>
>> Anyone have a solution?
>>
>> This has never happened to me before.
> Did this
>
>
>
> "Petra" wrote:
>
>> i installed it 7 times it is comming back over and over again

Thank you for your work, but I can't find how to install this step. On the
Windows update, I see 66 was not installed, but can't find it to install it.
I have others that did not install, such as 1.1, but this was before I found
your notes.

How do I get this??

Should I also install the installer that Microhard says you have to have too?


> 5) Install the SECURITY patch, the dreaded KB928366, we have all grown
> to hate. You can install it from the Windows Update program (be sure
> to ONLY select the KB928366 patch and NOTHING else, we dont want to
> put back 2.0 or 3.0 yet). It's OK go ahead and click ...it will be
> alright...you can do it...it's just one more time... :-)

WORKED LIKE A CHAMP !!!! THX !!!

"" wrote:

> Try this!
>
> Thanks to Jim and George!
>
> billhardin22
>
> Follow the direction in this note found in the Windows Update news group.
> There were a lot of people affected by this problem:
>
> Subject: Re: .NET Updates failed 7/12/2007 1:36 PM PST
>
> By: georgef In: microsoft.public.windowsupdate
>
> Here is EXACTLY what you do to solve this problem for Windows XP 32
> bit. If you happen to have a rarer 64 bit version, server OS, or
> SOMETHING else follow the same general instructions but get the
> version of the files appropriate for your system but first, Microsoft
> has ****ed me off beyond belief. I looked in my log and this same
> thing happened 6/2006...thanks MSFT for torturing us again this year.
> I thought it was a familiar feeling...nice branding...this is a huge
> humiliation for their .NET team in my opinion or perhaps we should
> start calling them the .NOT team...anyway....
>
> Steps:
> 1) Go to the control panel and select the add/remove software tool
> then TRY and remove everything with .NET in the name. If you can
> remove everything go to step 3. If you cannot remove everything go to
> step 2.
>
> 2) Go and download the windows installer clean up tool at:
> http://support.microsoft.com/kb/290301
>
> run the windows installer clean up tool and BE CAREFUL to only select
> the .NET items from the list and remove them. Note: this will likely
> leave the names as "dead links" in the Add/Remove Software list
> (ahhh ...Microsoft thoroughness at its best) but not to worry they
> will do no harm and will get fixed when we finish. It's possible to
> clean them up but let's stay out of the registry :-)
>
> 3) Go and get the file "dotnetfx.exe" this is ".NET 1.1" from:
>
> http://www.microsoft.com/downloads/d...displaylang=en
>
> install it.
>
> 4) Go and get the file "NDP1.1sp1-KB867460-X86.exe" this is the ".NET
> 1.1 service pack 1" from: my personal website (JUST KIDDING,
> RELAX...get everything of course from a microsoft.com domain)
>
> http://www.microsoft.com/downloads/d...displaylang=en
>
> install it.
>
> 5) Install the SECURITY patch, the dreaded KB928366, we have all grown
> to hate. You can install it from the Windows Update program (be sure
> to ONLY select the KB928366 patch and NOTHING else, we dont want to
> put back 2.0 or 3.0 yet). It's OK go ahead and click ...it will be
> alright...you can do it...it's just one more time... :-)
>
> 6) Re-run the Windows Update and you can add back in .NET 2.0 and 3.0
>
> 7) Post to thank me...
>
> Now WHY hasn't Microsoft posted instructions yet? .... What is UP?!
>
> Good night!
>
> George
>
>
>
> "" wrote:
>
> > There seems to be a problem many are having with the most recent critical
> > security updates.
> >
> > Automatic Update failed to install these updates on my PC over a dozen times.
> >
> > After finally installing now I receive the error message that Microsoft.NET
> > Framework v1.1.4322 Update is preventing my PC from entering standby mode.
> >
> > Anyone have a solution?
> >
> > This has never happened to me before.
> Did this
>
>
>
> "Petra" wrote:
>
> > i installed it 7 times it is comming back over and over again