.NET Framework 3.5 SP1 install problem ---- Please Help

I hope somebody can help me out here.
I just got Expression Web V3. It tells me I don't have .NET Framework 3.5
SP1 installed.

When I download the .NET SP1 from MS it installs about half way then says
an error was detected and unwinds everything.

The error box says "see Error Log". What error log? where? When I click on
it, MS Visual Studio 2008, it comes up but has its own error box "file
cannot be opened because it is being used by another application".

Talk about frustrating!

I reinstalled/repaired .NET 3.5 it went fine -- at least no errors reported.

Besides Visual Studio 2008, I show
..NET Component Framework 1.0 SP3 developer
..NET Component Framework 2.0 SP2
..NET Component Framework 3.5
..NET Framework 3.5

Really could use some suggestions here as I just want to get Ex Web 3.0
going.
If this is not the best posing site please suggest an alternative

Followup...
I removed all .NET's, removed Visual Studio 2008 and reinstalled it. It put
..NET 3.5 back (only).
Still could not load .NET .SP1
Got the following error in the event viewer log (Windows logs,Setup):-
The Windows update "Update for Windows (KB948610)" could not be installed
because of an error: 2147956403 "The referenced assembly is not installed on
your system." (Command line: ""C:\Windows\system32\WUSA.exe"
"C:\Users\JOHNMO~1\AppData\Local\Temp\dotnetfx3530 729.01\1033\dotnetmsp\x86\NetFX3.0-KB948610-v6001-x86.msu"
/quiet /norestart")

Any suggestions anybody


"John Monahan" <> wrote in message
news:%...
>I hope somebody can help me out here.
> I just got Expression Web V3. It tells me I don't have .NET Framework 3.5
> SP1 installed.
>
> When I download the .NET SP1 from MS it installs about half way then says
> an error was detected and unwinds everything.
>
> The error box says "see Error Log". What error log? where? When I click on
> it, MS Visual Studio 2008, it comes up but has its own error box "file
> cannot be opened because it is being used by another application".
>
> Talk about frustrating!
>
> I reinstalled/repaired .NET 3.5 it went fine -- at least no errors
> reported.
>
> Besides Visual Studio 2008, I show
> .NET Component Framework 1.0 SP3 developer
> .NET Component Framework 2.0 SP2
> .NET Component Framework 3.5
> .NET Framework 3.5
>
> Really could use some suggestions here as I just want to get Ex Web 3.0
> going.
> If this is not the best posing site please suggest an alternative
>
>
>

John Monahan;1128055 Wrote:
> Followup..
> I removed all .NET's, removed Visual Studio 2008 and reinstalled it. I
> pu
> ..NET 3.5 back (only)
> Still could not load .NET .SP
> Got the following error in the event viewer log (Windows logs,Setup):
> The Windows update "Update for Windows (KB948610)" could not b
> installe
> because of an error: 2147956403 "The referenced assembly is no
> installed o
> your system." (Command line: ""C:\Windows\system32\WUSA.exe
> "C:\Users\JOHNMO~1\AppData\Local\Temp\dotnetfx3530 729.01\1033\dotnetmsp\x86\NetFX3.0-KB948610-v6001-x86.msu
> /quiet /norestart"
>
> Any suggestions anybod
>
>
> "John Monahan" <monahan@xxxxxx> wrote in messag
> news:%23DOMYD2KKHA.4136@xxxxxx> > >
> > >I hope somebody can help me out here
> > > I just got Expression Web V3. It tells me I don't have .NET Framewor
> > 3.
> > > SP1 installed
> >
> > > When I download the .NET SP1 from MS it installs about half way the
> > say
> > > an error was detected and unwinds everything
> >
> > > The error box says "see Error Log". What error log? where? When
> > click o
> > > it, MS Visual Studio 2008, it comes up but has its own error bo
> > "fil
> > > cannot be opened because it is being used by another application"
> >
> > > Talk about frustrating
> >
> > > I reinstalled/repaired .NET 3.5 it went fine -- at least no error
> > > reported
> >
> > > Besides Visual Studio 2008, I sho
> > > .NET Component Framework 1.0 SP3 develope
> > > .NET Component Framework 2.0 SP
> > > .NET Component Framework 3.
> > > .NET Framework 3.
> >
> > > Really could use some suggestions here as I just want to get Ex We
> > 3.
> > > going
> > > If this is not the best posing site please suggest an alternativ
> >
> >
> > > > >

How did you remove NET Framework 3.5? Only classic Contro
Panel>>Programs and Features? -it's not enough.Remove NET Framework 3.
by using NET Framework Cleanup Tool by Aaron Stebner 'Aaron Stebner'
WebLog : What to do if other .NET Framework setup troubleshooting step
do not help
(http://blogs.msdn.com/astebner/archi...11/479928.aspx

--
Flavius

"Flavius" <> wrote in message
news:...
>
> John Monahan;1128055 Wrote:
>> Followup...
>> I removed all .NET's, removed Visual Studio 2008 and reinstalled it. It
>> put
>> ..NET 3.5 back (only).
>> Still could not load .NET .SP1
>> Got the following error in the event viewer log (Windows logs,Setup):-
>> The Windows update "Update for Windows (KB948610)" could not be
>> installed
>> because of an error: 2147956403 "The referenced assembly is not
>> installed on
>> your system." (Command line: ""C:\Windows\system32\WUSA.exe"
>> "C:\Users\JOHNMO~1\AppData\Local\Temp\dotnetfx3530 729.01\1033\dotnetmsp\x86\NetFX3.0-KB948610-v6001-x86.msu"
>> /quiet /norestart")
>>
>> Any suggestions anybody
>>
>>
>> "John Monahan" <monahan@xxxxxx> wrote in message
>> news:%23DOMYD2KKHA.4136@xxxxxx> > >
>> > >I hope somebody can help me out here.
>> > > I just got Expression Web V3. It tells me I don't have .NET Framework
>> > 3.5
>> > > SP1 installed.
>> > >
>> > > When I download the .NET SP1 from MS it installs about half way then
>> > says
>> > > an error was detected and unwinds everything.
>> > >
>> > > The error box says "see Error Log". What error log? where? When I
>> > click on
>> > > it, MS Visual Studio 2008, it comes up but has its own error box
>> > "file
>> > > cannot be opened because it is being used by another application".
>> > >
>> > > Talk about frustrating!
>> > >
>> > > I reinstalled/repaired .NET 3.5 it went fine -- at least no errors
>> > > reported.
>> > >
>> > > Besides Visual Studio 2008, I show
>> > > .NET Component Framework 1.0 SP3 developer
>> > > .NET Component Framework 2.0 SP2
>> > > .NET Component Framework 3.5
>> > > .NET Framework 3.5
>> > >
>> > > Really could use some suggestions here as I just want to get Ex Web
>> > 3.0
>> > > going.
>> > > If this is not the best posing site please suggest an alternative
>> > >
>> > >
>> > > > >
>
> How did you remove NET Framework 3.5? Only classic Control
> Panel>>Programs and Features? -it's not enough.Remove NET Framework 3.5
> by using NET Framework Cleanup Tool by Aaron Stebner 'Aaron Stebner's
> WebLog : What to do if other .NET Framework setup troubleshooting steps
> do not help'
> (http://blogs.msdn.com/astebner/archi...11/479928.aspx)
>
>
> --
> Flavius

Tried that. I removed all .NET listings and then ran the above program
twice. When I tried to install the .NET 3.5 + SP1 it proceeded as usual
about half way and then aborted. Same errot in System Error Log
(Command line: ""C:\Windows\system32\WUSA.exe"
"C:\Users\JOHNMO~1\AppData\Local\Temp\dotnetfx3530 729.01\1033\dotnetmsp\x86\NetFX3.0-KB948610-v6001-x86.msu"
/quiet /norestart")

Make sure Windows Installer service set to MANUAL and Windows Updat
service set AUTO (DELAYED) and BITS services AUTO (DELAYED) -if thes
services are disabled you have to correct it
Try reinstall Windows Update Agent 'Description of the Windows Updat
Stand-alone Installer (Wusa.exe) and of .msu files in Window
Vista and in Windows Server 2008
(http://support.microsoft.com/kb/934307
diagnose also BITS service 'An update is available to fix a Backgroun
Intelligent Transfer Service (BITS) crash on a Window
Vista-based computer' (http://support.microsoft.com/?kbid=940520
and whole WU components 'How do I reset Windows Update components?
(http://support.microsoft.com/kb/971058

--
Flavius

Thanks Flavius,
I gave up and want back to a 1 year old WHS backup and started from there. A
real pain to reconstruct everything but at least I think I am ready for W7.
John

"Flavius" <> wrote in message
news:...
>
> Make sure Windows Installer service set to MANUAL and Windows Update
> service set AUTO (DELAYED) and BITS services AUTO (DELAYED) -if these
> services are disabled you have to correct it,
> Try reinstall Windows Update Agent 'Description of the Windows Update
> Stand-alone Installer (Wusa.exe) and of .msu files in Windows
> Vista and in Windows Server 2008'
> (http://support.microsoft.com/kb/934307)
> diagnose also BITS service 'An update is available to fix a Background
> Intelligent Transfer Service (BITS) crash on a Windows
> Vista-based computer' (http://support.microsoft.com/?kbid=940520)
> and whole WU components 'How do I reset Windows Update components?'
> (http://support.microsoft.com/kb/971058)
>
>
> --
> Flavius