NETBEUI communication between Windows 98 and Vista Home?

For several years I have had a Windows 98 system connected via the LAN
to an XP system, for file and printer sharing. This communication uses
NETBEUI, not TCP/IP (because I don't want the Win98 system exposed to
the Internet). It works very well.

I am now buying a Vista Home laptop, and will want this machine to
communicate with the Win98 system via the LAN, again using NETBEUI,
*not* TCP/IP.

Is this possible?

--
Ian

* ian:
> For several years I have had a Windows 98 system connected via the LAN
> to an XP system, for file and printer sharing. This communication uses
> NETBEUI, not TCP/IP (because I don't want the Win98 system exposed to
> the Internet). It works very well.
>
> I am now buying a Vista Home laptop, and will want this machine to
> communicate with the Win98 system via the LAN, again using NETBEUI,
> *not* TCP/IP.
>
> Is this possible?

There really aren't that many google hits on NetBEUI for Vista....
I seriously doubt that many people use NetBEUI anymore. I did
find these links below. I have no idea if it works or if it's even a
good idea to try.... don't blame me. The TCP/IP stack in Vista has
been redone, and how NetBEUI may impact that and working with
other computers, looks to be unknown.

http://en.wikipedia.org/wiki/NetBEUI

Microsoft officially dropped its support starting from Windows XP[3], although it still
provided the user with an unsupported way to manually install it from the original CD-ROM[4] to
both encourage and ease the necessary transition to the NetBIOS-over-TCP/IP.

Because of this, officially nothing is known about whether or not NetBEUI can be unsupportedly
but effectively installed on Windows Vista, and even unofficial reports seem to be unavailable
on the Internet. Besides this, an additional reason of concern may be that, since the TCP/IP
network stack changed significantly in Windows Vista[5], the client ([Client for Microsoft
Networks]) and server ([File and Printer Sharing for Microsoft Networks]) components - which
the network protocols are bound to - could have changed too due to the rewriting process, and
could have lost their previous ability to bind to the NetBEUI protocol written for Windows XP.
Despite this, it seems that installing NetBEUI on Windows Vista using NetBEUI's files taken
from Windows XP original CD-ROM works effectively, with no apparent problems, and supporting
all the authentication schemes (LM, NTLM, NTLMv2).

http://www.tek-tips.com/viewthread.c...346919&page=10
In the XP CD goto folder VALUEADD, then MSFT, then NET, then NETBEUI. Copy the following two
files:-

Copy NETNBF.INF to the INF folder within the main WINDOWS folder.

Copy NBF.SYS to the WINDOWS\SYSTEM32\DRIVERS\ETC folder.

Now click START, then CONNECT TO, Click OPEN NETWORK AND SHARING CENTER, and click VIEW STATUS.

(Breathe deeply, nearly there!)

Then click PROPERTIES, click CONTINUE, click INSTALL, double-click PROTOCOL, highlight NetBEUI
Protocol, click OK, and the "YES" to restart computer.

http://www.mac-net.com/174984.page


-Michael

In message <#>, MICHAEL
<> writes

[Lots of helpful information, snipped].

Many thanks Michael. Most useful. The method you describe is the way I
did it for XP. I guess I'll have to try it myself to see if it works
with Vista.

--
Ian

* ian:
> In message <#>, MICHAEL
> <> writes
>
> [Lots of helpful information, snipped].
>
> Many thanks Michael. Most useful. The method you describe is the way I
> did it for XP. I guess I'll have to try it myself to see if it works
> with Vista.

Make sure you have a recent system restore point.
If not, manually create one.... just to be on the safe side.


-Michael