No LAN or Internet after Vista SP1 install

So why is there no internet or LAN connections after SP1 installed? All LAN
drivers updated. Vista reports drivers are the latest, but cannot connect to
LAN or ADSL modem. ADSL modem says there is no p.c. connected to it. After
roll-back LAN connections come back okay and internet browsing is fine. Done
this twice. Same problem. Any ideas? (ASUS motherboard with 32-bit Vista
Bunsiness, dual-core uP and 4GB RAM).

Often, after the sp1 update, you need to remove problem hardware and
reinstall the driver.
Go to start and type the command :
devmgmt.msc

In the Properties of the Ethernet (Network) device, use the Action menu to
'uninstall' and then 'scan for new hardware'.

--
Was this helpful? Then click the Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales...eAPostAsAnswer
Mark L. Ferguson
..

"Electron" <> wrote in message
news:28D0C836-11A0-4579-91C7-...
> So why is there no internet or LAN connections after SP1 installed? All
> LAN
> drivers updated. Vista reports drivers are the latest, but cannot connect
> to
> LAN or ADSL modem. ADSL modem says there is no p.c. connected to it. After
> roll-back LAN connections come back okay and internet browsing is fine.
> Done
> this twice. Same problem. Any ideas? (ASUS motherboard with 32-bit Vista
> Bunsiness, dual-core uP and 4GB RAM).

On Tue, 25 Mar 2008 17:33:05 -0700, Electron
<> wrote:

>So why is there no internet or LAN connections after SP1 installed? All LAN
>drivers updated. Vista reports drivers are the latest, but cannot connect to
>LAN or ADSL modem. ADSL modem says there is no p.c. connected to it. After
>roll-back LAN connections come back okay and internet browsing is fine. Done
>this twice. Same problem. Any ideas? (ASUS motherboard with 32-bit Vista
>Bunsiness, dual-core uP and 4GB RAM).

That happened to me as well. What I did is go into device manager and
remove the network adaptor. Actually there was a second entry in there
that probably caused the problem. Anyway...I deleted both of them and
rebooted. Vista then put back in the one that should be there and all
worked fine after that.

Regards,

Trev

Thanks to both of you for the advice. Haven't tried this yet because
installing SP1 takes a long time. Probably try again over the weekend and
then I will report back.
Regards.

"Trevor" wrote:

> On Tue, 25 Mar 2008 17:33:05 -0700, Electron
> <> wrote:
>
> >So why is there no internet or LAN connections after SP1 installed? All LAN
> >drivers updated. Vista reports drivers are the latest, but cannot connect to
> >LAN or ADSL modem. ADSL modem says there is no p.c. connected to it. After
> >roll-back LAN connections come back okay and internet browsing is fine. Done
> >this twice. Same problem. Any ideas? (ASUS motherboard with 32-bit Vista
> >Bunsiness, dual-core uP and 4GB RAM).
>
> That happened to me as well. What I did is go into device manager and
> remove the network adaptor. Actually there was a second entry in there
> that probably caused the problem. Anyway...I deleted both of them and
> rebooted. Vista then put back in the one that should be there and all
> worked fine after that.
>
> Regards,
>
> Trev
>