The heading of your post is a bit misleading, as you say you can watch live
TV and your camera, but you cannot record, because when you select record, it
will not record because 'no line in' --
As you are most probably aware if the problem in within WMC, that program
cannot be reinstalled by it self, it would require a complete reinstall of
Vista.
Maybe you should use the restore feature and take it back to a restore point
prior to when the problem started.
Or it could a fault within the TVtuner card and a reinstall of the driver
may fix!!
Unfortunately the cause could be one of many!!!
If you decide to go fishing instead let me know and I will join you.
Regards
Bob J
If advise given from anyone, solves problem or not, or if solved from
another source,post back & let us know.
Then we all benefit.
"big_john_bc" wrote:
> Hi Bob, Yes I am using WMC and here is something I just found. I DO get a tv
> signal when the VCR is set to channel three but NO tv signal when I set the
> VCR to "line". Complicating things is that I also have a remote camera
> attched to the VCR which I can watch on "live tv" but cannot record as it
> says no tv signal in line mode. It DID record before.
>
> So it seems the TV Signal is there but the VCR/Camera connection isn't.. I
> can watch live tv and/or live camera but cannot record either as I previously
> did..
>
> Perhaps I should take up fishing and get out more on my little boat!!
>
> "Bob J" wrote:
>
> > Are you watching TV thru WMC, have you tried resetting the reception?
> > Have you connected the ant./cable into a normal T to check reception?
> > --
> > Regards
> > Bob J
> > If advise given from anyone, solves problem or not, or if solved from
> > another source,post back & let us know.
> > Then we all benefit.
> >
> >
> >
> > "big_john_bc" wrote:
> >
> > > Hi everyone,
> > >
> > > I'm running Vista home premium with a ATI Theater 550 pro tuner. The tv
> > > cable run to my vcr then cables to the tuner. The problem is that I COULD
> > > record manually before with no problem and then got the occassional "No tv
> > > signal" error message then got the message All the time. THEN everything
> > > would work again until the occassonal error then all the time error message.
> > > Have downloaded ATI's current driver, checked all cables but the problem
> > > persists?
> > > Any ideas what causes this. Currently I get No signal message all the time.
> > > Nothing new downloaded nor installed.
|
Similar Threads
Linear Mode
