Windows Vista Tips

Windows Vista Tips > Newsgroups > Windows Server > File Systems > not accessible error when accessing dfs location on one of two ser

Reply
Thread Tools Display Modes

not accessible error when accessing dfs location on one of two ser

 
 
breBill
Guest
Posts: n/a

 
      01-29-2009
I get an error on some of my windows xp client machines that says the folder
in dfs is not accessible.

=======================================
\\dfsroot\dfs\sharename is not accessible. You might not have permission to
use this network resource. contact the administraotr of this server to find
out if you have access permissions.

the network path is not found.
=======================================

All shares to this one server exhibit this behavior. we have shares on a
different server that work fine on all machines. Most machines in the
network are able to access all dfs locations. the servers are windows 2003.
there are some vista client machines on the network.

when i right click the folder in dfs and select properties, there is a dfs
tab. on that tab, i can click 'clear history', 'check status' and 'set
active'.
clear history - does not seem to do anything.
check status - changes the icon in the referral list to include a small red
circle with white x. also, the status changes to 'Unreachable'.
set active - does not seem to do anything except change the active column to
'yes'.

I attempted to access the share directly via the path shown in the referral
list. doing this i get an error saying 'windows cannot find
'\\server\path$'. check the spelling and try again, or try searching for the
item by clicking the start button and then clicking search'.

On some of the machines, when this error shows up, rebooting will fix the
problem. on others, deleting the offline cache will fix the problem for a
while.

--
--------------------
Bill Cochran
 
Reply With Quote
 
 
 
 
breBill
Guest
Posts: n/a

 
      01-29-2009
I also noticed that the security tab is not showing on the shares located on
the server exhibiting the failure. For the server that works, the security
tab displays in the properties view of each folder.

--
--------------------
Bill Cochran

 
Reply With Quote
 
breBill
Guest
Posts: n/a

 
      01-29-2009
Here's the output from the failing client when running dfsutil.exe:

<<BEGIN OUTPUT>>
C:\>dfsutil /spcInfo

DFS Utility Version 5.2 (built on 5.2.3790.3959)
Copyright (c) Microsoft Corporation. All rights reserved.
[*][server1.internalnetwork.company.com][*][company][*][internalnetwork.company.com]
[+][internalnetwork.company.com]
[+server1.internalnetwork.company.com]
[-server2.internalnetwork.company.com]
[+][company]
[-server2]
[+server1]

DfsUtil command completed successfully.

C:\>dfsutil /PktInfo

DFS Utility Version 5.2 (built on 5.2.3790.3959)
Copyright (c) Microsoft Corporation. All rights reserved.

--mup.sys--
1 entries...
Entry: \internalnetwork.company.com\dfs
ShortEntry: \internalnetwork.company.com\dfs
Expires in 0 seconds
UseCount: 3 Type:0x81 ( REFERRAL_SVC DFS )
0:[\server2\DFS] State:0x119 ( ACTIVE TARGETSET )
1:[\server1\DFS] State:0x09 ( )


DfsUtil command completed successfully.

C:\>dfsutil /PktInfo

DFS Utility Version 5.2 (built on 5.2.3790.3959)
Copyright (c) Microsoft Corporation. All rights reserved.

--mup.sys--
4 entries...
Entry: \internalnetwork.company.com\dfs
ShortEntry: \internalnetwork.company.com\dfs
Expires in 300 seconds
UseCount: 3 Type:0x81 ( REFERRAL_SVC DFS )
0:[\server2\DFS] State:0x119 ( ACTIVE TARGETSET )
1:[\server1\DFS] State:0x09 ( )

Entry: \internalnetwork.company.com\dfs\Share1
ShortEntry: \internalnetwork.company.com\dfs\Share1
Expires in 1800 seconds
UseCount: 0 Type:0x1 ( DFS )
0:[\server1\Share1$] State:0x121 ( TARGETSET )

Entry: \internalnetwork.company.com\dfs\Share2
ShortEntry: \internalnetwork.company.com\dfs\Share2
Expires in 1800 seconds
UseCount: 0 Type:0x1 ( DFS )
0:[\server1\Share2$] State:0x121 ( TARGETSET )

Entry: \internalnetwork.company.com\dfs\Share3
ShortEntry: \internalnetwork.company.com\dfs\Share3
Expires in 1800 seconds
UseCount: 0 Type:0x1 ( DFS )
0:[\server1\Share3$] State:0x121 ( TARGETSET )


DfsUtil command completed successfully.

C:\>

<<END OUTPUT>>


--
--------------------
Bill Cochran


 
Reply With Quote
 
breBill
Guest
Posts: n/a

 
      01-29-2009
I'm trying to find information about the dfsutil output. What are the state
codes? where is some documentation about these codes? I have 0x09 and 0x19.
What do they mean?

--
--------------------
Bill Cochran

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
New office accessing Windows Server/apps at old location? Jeff Server Networking 3 09-13-2009 03:22 AM
Re: \\pc name not accessible but \\pc name.Domain is accessible Server 2003 Lanwench [MVP - Exchange] Server Setup 0 01-25-2007 01:34 PM
Re: \\pc name not accessible but \\pc name.Domain is accessible Server 2003 Massimo Server Setup 0 01-25-2007 07:15 AM
Help! Accessing an IO port location in Win2k driver mahi Windows Vista Drivers 4 11-23-2005 05:43 PM
Accessing resources in AD tree from remote location? Jerztek Active Directory 0 05-11-2005 11:13 PM



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59