Problems capturing some OTA ATSC in XPMCE

in the Edit Channel provision, I deselected 47-1 and 21-1. There were no
signals for 10-1 and 12-1. Next, in the Edit Channel provision I deselected
10-1 and 12-1. Rebooted. This left me with the three channels for which I
have no issue. I ran the TV signal set up procedures and also downloaded the
latest copy of the Guide. I then reselected 12-1, resulting in no signal.
Then reselected 10-1 with the same result. After selecting 47-1 and 21-1, I
was back to my original situation: to receive signals on 10-1 and 12-1, I had
to use a two-step process, or selecting 47-1 and 21-1 respectively.

"Curious" wrote:

> Have you tried deleting both then rebooting and adding one back in manually?
>
> "snjmc" <> wrote in message
> news:7B2273AD-B7CB-4AC0-AC2C-...
> > So I deleted 21-1 (I chose ABC rather than CBS) from the MCE Guide. The
> > result was as I had predicted. I was now not able to receive ABC at all,
> > while previously I was able to receive ABC by doing the two-step: 21-1,
> > then
> > 12-1. ABC and CBS run the lowest input power, locally. However, I have no
> > difficulty receiving them on my Sony Bravia, only on my computer. Same
> > antenna.
> >
> > "snjmc" wrote:
> >
> >> The only reason that 47-1 and 21-1 are in the guide is because I
> >> discovered,
> >> by trial and error, that I was only able to receive CBS and ABC if I
> >> first
> >> selected the 47-1 in the 21-1 channels. It's as though there is a signal
> >> compliment that is missing in, say, 10-1 and is present in 47-1.
> >> Furthermore,
> >> that compliment has to be passed to the tuner before thecomplement
> >> contained
> >> in 10-1. I know this sounds weird, but I have had other, local, techs say
> >> this is plausible. It's just no one seems to have a fix for it. However,
> >> I
> >> follow your reasoning and delete 47-1 and see what happens.
> >>
> >> "Curious" wrote:
> >>
> >> > I think your symptoms are caused by the fact that both 47-1 and 10-1
> >> > are CBS
> >> > affiliates and 12-1 and 21-1 are both ABC affiliates. You possibly
> >> > need to
> >> > delete one of the CBS channels and one of the ABC channels from your
> >> > guide.
> >> >
> >> > "snjmc" <> wrote in message
> >> > news:FB6B4511-B57B-4E6D-BEBC-...
> >> > >
> >> > >
> >> > > "Curious" wrote:
> >> > >
> >> > >> What zip code are you in?
> >> > >>
> >> > >> "snjmc" <> wrote in message
> >> > >> news:106D93B1-D420-4B41-97B6-...
> >> > >> >
> >> > >> >
> >> > >> > "Barb Bowman" wrote:
> >> > >> >
> >> > >> >> looks similar to
> >> > >> >> http://thegreenbutton.com/forums/p/7...60.aspx#389860
> >> > >> >>
> >> > >> >> if you are using the most recent drivers, you might want to start
> >> > >> >> a
> >> > >> >> thread on
> >> > >> >> thegreenbutton.com as well as here.
> >> > >> >>
> >> > >> >> On Fri, 27 Nov 2009 23:24:01 -0800, snjmc
> >> > >> >> <>
> >> > >> >> wrote:
> >> > >> >>
> >> > >> >> >Selecting Channel 47.1, getting a no signal message, then tuning
> >> > >> >> >channel
> >> > >> >> >10.1
> >> > >> >> >produces an almost always good picture, but if I select 10.1
> >> > >> >> >first I
> >> > >> >> >get
> >> > >> >> >no
> >> > >> >> >signal.
> >> > >> >> >I get the same result by turning channel 21.1, then channel
> >> > >> >> >12.1.
> >> > >> >> >I am no issues such as this with any of the other 3 OTA ATSC
> >> > >> >> >signals
> >> > >> >> >available.
> >> > >> >> >I removed my Vbox 164e and drivers and installed the Hauppauge
> >> > >> >> >2250
> >> > >> >> >and
> >> > >> >> >current drivers. In Media Center the Hauppauge performed the
> >> > >> >> >same way
> >> > >> >> >as
> >> > >> >> >the
> >> > >> >> >Vbox, however the Hauppauge WinTV7 software connected with all
> >> > >> >> >the
> >> > >> >> >available
> >> > >> >> >ATSC signals flawlessly.
> >> > >> >> Barb Bowman
> >> > >> >> MS-MVP
> >> > >> >> http://www.digitalmediaphile.com
> >> > >> >> http://digitalmediaphile.wordpress.com
> >> > >> >> .
> >> > >> >> I have posted on Green Button a more wordy description of my
> >> > >> >> problem.
> >> > >> >> The
> >> > >> >> link you provided was not helpful in that it dealt with QUAM
> >> > >> >> issues
> >> > >> >> and
> >> > >> >> in other ways did not fit my situation. I visited your webpages,
> >> > >> >> but
> >> > >> >> did
> >> > >> >> not see any solution to my problem. Perhaps you could direct me
> >> > >> >> to
> >> > >> >> some
> >> > >> >> free software that would temporarily replace XP MCE, but still
> >> > >> >> compatible
> >> > >> >> to the Vbox 164e. If such replacement software does not exhibit
> >> > >> >> the
> >> > >> >> problem I'm having, they would give me more indication that my
> >> > >> >> problem
> >> > >> >> is
> >> > >> >> with XP MCE. If I felt strongly enough, I might reinstall.
> >> > >>
> >> > >> .
> >> > >> 97540
> >> >
> >> > .
> >> >
> .
>

Since you reran setup for your Zip code instead of just adding one of the
channels in each problem channel pair to the guide you had working with the
3 channels as I suggested I am not surprised that you got the same result
that you had before.

"snjmc" <> wrote in message
news:F01AF735-2034-420F-BB12-...
> in the Edit Channel provision, I deselected 47-1 and 21-1. There were no
> signals for 10-1 and 12-1. Next, in the Edit Channel provision I
> deselected
> 10-1 and 12-1. Rebooted. This left me with the three channels for which I
> have no issue. I ran the TV signal set up procedures and also downloaded
> the
> latest copy of the Guide. I then reselected 12-1, resulting in no signal.
> Then reselected 10-1 with the same result. After selecting 47-1 and 21-1,
> I
> was back to my original situation: to receive signals on 10-1 and 12-1, I
> had
> to use a two-step process, or selecting 47-1 and 21-1 respectively.
>
> "Curious" wrote:
>
>> Have you tried deleting both then rebooting and adding one back in
>> manually?
>>
>> "snjmc" <> wrote in message
>> news:7B2273AD-B7CB-4AC0-AC2C-...
>> > So I deleted 21-1 (I chose ABC rather than CBS) from the MCE Guide. The
>> > result was as I had predicted. I was now not able to receive ABC at
>> > all,
>> > while previously I was able to receive ABC by doing the two-step: 21-1,
>> > then
>> > 12-1. ABC and CBS run the lowest input power, locally. However, I have
>> > no
>> > difficulty receiving them on my Sony Bravia, only on my computer. Same
>> > antenna.
>> >
>> > "snjmc" wrote:
>> >
>> >> The only reason that 47-1 and 21-1 are in the guide is because I
>> >> discovered,
>> >> by trial and error, that I was only able to receive CBS and ABC if I
>> >> first
>> >> selected the 47-1 in the 21-1 channels. It's as though there is a
>> >> signal
>> >> compliment that is missing in, say, 10-1 and is present in 47-1.
>> >> Furthermore,
>> >> that compliment has to be passed to the tuner before thecomplement
>> >> contained
>> >> in 10-1. I know this sounds weird, but I have had other, local, techs
>> >> say
>> >> this is plausible. It's just no one seems to have a fix for it.
>> >> However,
>> >> I
>> >> follow your reasoning and delete 47-1 and see what happens.
>> >>
>> >> "Curious" wrote:
>> >>
>> >> > I think your symptoms are caused by the fact that both 47-1 and 10-1
>> >> > are CBS
>> >> > affiliates and 12-1 and 21-1 are both ABC affiliates. You possibly
>> >> > need to
>> >> > delete one of the CBS channels and one of the ABC channels from
>> >> > your
>> >> > guide.
>> >> >
>> >> > "snjmc" <> wrote in message
>> >> > news:FB6B4511-B57B-4E6D-BEBC-...
>> >> > >
>> >> > >
>> >> > > "Curious" wrote:
>> >> > >
>> >> > >> What zip code are you in?
>> >> > >>
>> >> > >> "snjmc" <> wrote in message
>> >> > >> news:106D93B1-D420-4B41-97B6-...
>> >> > >> >
>> >> > >> >
>> >> > >> > "Barb Bowman" wrote:
>> >> > >> >
>> >> > >> >> looks similar to
>> >> > >> >> http://thegreenbutton.com/forums/p/7...60.aspx#389860
>> >> > >> >>
>> >> > >> >> if you are using the most recent drivers, you might want to
>> >> > >> >> start
>> >> > >> >> a
>> >> > >> >> thread on
>> >> > >> >> thegreenbutton.com as well as here.
>> >> > >> >>
>> >> > >> >> On Fri, 27 Nov 2009 23:24:01 -0800, snjmc
>> >> > >> >> <>
>> >> > >> >> wrote:
>> >> > >> >>
>> >> > >> >> >Selecting Channel 47.1, getting a no signal message, then
>> >> > >> >> >tuning
>> >> > >> >> >channel
>> >> > >> >> >10.1
>> >> > >> >> >produces an almost always good picture, but if I select 10.1
>> >> > >> >> >first I
>> >> > >> >> >get
>> >> > >> >> >no
>> >> > >> >> >signal.
>> >> > >> >> >I get the same result by turning channel 21.1, then channel
>> >> > >> >> >12.1.
>> >> > >> >> >I am no issues such as this with any of the other 3 OTA ATSC
>> >> > >> >> >signals
>> >> > >> >> >available.
>> >> > >> >> >I removed my Vbox 164e and drivers and installed the
>> >> > >> >> >Hauppauge
>> >> > >> >> >2250
>> >> > >> >> >and
>> >> > >> >> >current drivers. In Media Center the Hauppauge performed the
>> >> > >> >> >same way
>> >> > >> >> >as
>> >> > >> >> >the
>> >> > >> >> >Vbox, however the Hauppauge WinTV7 software connected with
>> >> > >> >> >all
>> >> > >> >> >the
>> >> > >> >> >available
>> >> > >> >> >ATSC signals flawlessly.
>> >> > >> >> Barb Bowman
>> >> > >> >> MS-MVP
>> >> > >> >> http://www.digitalmediaphile.com
>> >> > >> >> http://digitalmediaphile.wordpress.com
>> >> > >> >> .
>> >> > >> >> I have posted on Green Button a more wordy description of my
>> >> > >> >> problem.
>> >> > >> >> The
>> >> > >> >> link you provided was not helpful in that it dealt with QUAM
>> >> > >> >> issues
>> >> > >> >> and
>> >> > >> >> in other ways did not fit my situation. I visited your
>> >> > >> >> webpages,
>> >> > >> >> but
>> >> > >> >> did
>> >> > >> >> not see any solution to my problem. Perhaps you could direct
>> >> > >> >> me
>> >> > >> >> to
>> >> > >> >> some
>> >> > >> >> free software that would temporarily replace XP MCE, but still
>> >> > >> >> compatible
>> >> > >> >> to the Vbox 164e. If such replacement software does not
>> >> > >> >> exhibit
>> >> > >> >> the
>> >> > >> >> problem I'm having, they would give me more indication that my
>> >> > >> >> problem
>> >> > >> >> is
>> >> > >> >> with XP MCE. If I felt strongly enough, I might reinstall.
>> >> > >>
>> >> > >> .
>> >> > >> 97540
>> >> >
>> >> > .
>> >> >
>> .
>>

When you say "delete" a channel. What, specifically, are the steps for doing
that? I ask because perhaps removing a check mark from a box is not what you
had in mind. The Guide lists the "deleted" channel, but shows "no data
available". No signal is received for such a channel.

"Curious" wrote:

> Since you reran setup for your Zip code instead of just adding one of the
> channels in each problem channel pair to the guide you had working with the
> 3 channels as I suggested I am not surprised that you got the same result
> that you had before.
>
> "snjmc" <> wrote in message
> news:F01AF735-2034-420F-BB12-...
> > in the Edit Channel provision, I deselected 47-1 and 21-1. There were no
> > signals for 10-1 and 12-1. Next, in the Edit Channel provision I
> > deselected
> > 10-1 and 12-1. Rebooted. This left me with the three channels for which I
> > have no issue. I ran the TV signal set up procedures and also downloaded
> > the
> > latest copy of the Guide. I then reselected 12-1, resulting in no signal.
> > Then reselected 10-1 with the same result. After selecting 47-1 and 21-1,
> > I
> > was back to my original situation: to receive signals on 10-1 and 12-1, I
> > had
> > to use a two-step process, or selecting 47-1 and 21-1 respectively.
> >
> > "Curious" wrote:
> >
> >> Have you tried deleting both then rebooting and adding one back in
> >> manually?
> >>
> >> "snjmc" <> wrote in message
> >> news:7B2273AD-B7CB-4AC0-AC2C-...
> >> > So I deleted 21-1 (I chose ABC rather than CBS) from the MCE Guide. The
> >> > result was as I had predicted. I was now not able to receive ABC at
> >> > all,
> >> > while previously I was able to receive ABC by doing the two-step: 21-1,
> >> > then
> >> > 12-1. ABC and CBS run the lowest input power, locally. However, I have
> >> > no
> >> > difficulty receiving them on my Sony Bravia, only on my computer. Same
> >> > antenna.
> >> >
> >> > "snjmc" wrote:
> >> >
> >> >> The only reason that 47-1 and 21-1 are in the guide is because I
> >> >> discovered,
> >> >> by trial and error, that I was only able to receive CBS and ABC if I
> >> >> first
> >> >> selected the 47-1 in the 21-1 channels. It's as though there is a
> >> >> signal
> >> >> compliment that is missing in, say, 10-1 and is present in 47-1.
> >> >> Furthermore,
> >> >> that compliment has to be passed to the tuner before thecomplement
> >> >> contained
> >> >> in 10-1. I know this sounds weird, but I have had other, local, techs
> >> >> say
> >> >> this is plausible. It's just no one seems to have a fix for it.
> >> >> However,
> >> >> I
> >> >> follow your reasoning and delete 47-1 and see what happens.
> >> >>
> >> >> "Curious" wrote:
> >> >>
> >> >> > I think your symptoms are caused by the fact that both 47-1 and 10-1
> >> >> > are CBS
> >> >> > affiliates and 12-1 and 21-1 are both ABC affiliates. You possibly
> >> >> > need to
> >> >> > delete one of the CBS channels and one of the ABC channels from
> >> >> > your
> >> >> > guide.
> >> >> >
> >> >> > "snjmc" <> wrote in message
> >> >> > news:FB6B4511-B57B-4E6D-BEBC-...
> >> >> > >
> >> >> > >
> >> >> > > "Curious" wrote:
> >> >> > >
> >> >> > >> What zip code are you in?
> >> >> > >>
> >> >> > >> "snjmc" <> wrote in message
> >> >> > >> news:106D93B1-D420-4B41-97B6-...
> >> >> > >> >
> >> >> > >> >
> >> >> > >> > "Barb Bowman" wrote:
> >> >> > >> >
> >> >> > >> >> looks similar to
> >> >> > >> >> http://thegreenbutton.com/forums/p/7...60.aspx#389860
> >> >> > >> >>
> >> >> > >> >> if you are using the most recent drivers, you might want to
> >> >> > >> >> start
> >> >> > >> >> a
> >> >> > >> >> thread on
> >> >> > >> >> thegreenbutton.com as well as here.
> >> >> > >> >>
> >> >> > >> >> On Fri, 27 Nov 2009 23:24:01 -0800, snjmc
> >> >> > >> >> <>
> >> >> > >> >> wrote:
> >> >> > >> >>
> >> >> > >> >> >Selecting Channel 47.1, getting a no signal message, then
> >> >> > >> >> >tuning
> >> >> > >> >> >channel
> >> >> > >> >> >10.1
> >> >> > >> >> >produces an almost always good picture, but if I select 10.1
> >> >> > >> >> >first I
> >> >> > >> >> >get
> >> >> > >> >> >no
> >> >> > >> >> >signal.
> >> >> > >> >> >I get the same result by turning channel 21.1, then channel
> >> >> > >> >> >12.1.
> >> >> > >> >> >I am no issues such as this with any of the other 3 OTA ATSC
> >> >> > >> >> >signals
> >> >> > >> >> >available.
> >> >> > >> >> >I removed my Vbox 164e and drivers and installed the
> >> >> > >> >> >Hauppauge
> >> >> > >> >> >2250
> >> >> > >> >> >and
> >> >> > >> >> >current drivers. In Media Center the Hauppauge performed the
> >> >> > >> >> >same way
> >> >> > >> >> >as
> >> >> > >> >> >the
> >> >> > >> >> >Vbox, however the Hauppauge WinTV7 software connected with
> >> >> > >> >> >all
> >> >> > >> >> >the
> >> >> > >> >> >available
> >> >> > >> >> >ATSC signals flawlessly.
> >> >> > >> >> Barb Bowman
> >> >> > >> >> MS-MVP
> >> >> > >> >> http://www.digitalmediaphile.com
> >> >> > >> >> http://digitalmediaphile.wordpress.com
> >> >> > >> >> .
> >> >> > >> >> I have posted on Green Button a more wordy description of my
> >> >> > >> >> problem.
> >> >> > >> >> The
> >> >> > >> >> link you provided was not helpful in that it dealt with QUAM
> >> >> > >> >> issues
> >> >> > >> >> and
> >> >> > >> >> in other ways did not fit my situation. I visited your
> >> >> > >> >> webpages,
> >> >> > >> >> but
> >> >> > >> >> did
> >> >> > >> >> not see any solution to my problem. Perhaps you could direct
> >> >> > >> >> me
> >> >> > >> >> to
> >> >> > >> >> some
> >> >> > >> >> free software that would temporarily replace XP MCE, but still
> >> >> > >> >> compatible
> >> >> > >> >> to the Vbox 164e. If such replacement software does not
> >> >> > >> >> exhibit
> >> >> > >> >> the
> >> >> > >> >> problem I'm having, they would give me more indication that my
> >> >> > >> >> problem
> >> >> > >> >> is
> >> >> > >> >> with XP MCE. If I felt strongly enough, I might reinstall.
> >> >> > >>
> >> >> > >> .
> >> >> > >> 97540
> >> >> >
> >> >> > .
> >> >> >
> >> .
> >>
> .
>

I do not use the guide so I don't know the details of adding or deleting
channels from the available channels list.
I was trying to get you to add one channel from each of the channel pairs
that you got with the setup that only showed the 3 local channels.
Another possibility is try using as Zip code that is close enough to Medford
to get the the 5 Medford channels but which is no longer in range of the
other conflicting ABC and CBS network channels.

"snjmc" <> wrote in message
news:147A5A07-413B-4C07-83AA-...
> When you say "delete" a channel. What, specifically, are the steps for
> doing
> that? I ask because perhaps removing a check mark from a box is not what
> you
> had in mind. The Guide lists the "deleted" channel, but shows "no data
> available". No signal is received for such a channel.
>
> "Curious" wrote:
>
>> Since you reran setup for your Zip code instead of just adding one of the
>> channels in each problem channel pair to the guide you had working with
>> the
>> 3 channels as I suggested I am not surprised that you got the same result
>> that you had before.
>>
>> "snjmc" <> wrote in message
>> news:F01AF735-2034-420F-BB12-...
>> > in the Edit Channel provision, I deselected 47-1 and 21-1. There were
>> > no
>> > signals for 10-1 and 12-1. Next, in the Edit Channel provision I
>> > deselected
>> > 10-1 and 12-1. Rebooted. This left me with the three channels for which
>> > I
>> > have no issue. I ran the TV signal set up procedures and also
>> > downloaded
>> > the
>> > latest copy of the Guide. I then reselected 12-1, resulting in no
>> > signal.
>> > Then reselected 10-1 with the same result. After selecting 47-1 and
>> > 21-1,
>> > I
>> > was back to my original situation: to receive signals on 10-1 and 12-1,
>> > I
>> > had
>> > to use a two-step process, or selecting 47-1 and 21-1 respectively.
>> >
>> > "Curious" wrote:
>> >
>> >> Have you tried deleting both then rebooting and adding one back in
>> >> manually?
>> >>
>> >> "snjmc" <> wrote in message
>> >> news:7B2273AD-B7CB-4AC0-AC2C-...
>> >> > So I deleted 21-1 (I chose ABC rather than CBS) from the MCE Guide.
>> >> > The
>> >> > result was as I had predicted. I was now not able to receive ABC at
>> >> > all,
>> >> > while previously I was able to receive ABC by doing the two-step:
>> >> > 21-1,
>> >> > then
>> >> > 12-1. ABC and CBS run the lowest input power, locally. However, I
>> >> > have
>> >> > no
>> >> > difficulty receiving them on my Sony Bravia, only on my computer.
>> >> > Same
>> >> > antenna.
>> >> >
>> >> > "snjmc" wrote:
>> >> >
>> >> >> The only reason that 47-1 and 21-1 are in the guide is because I
>> >> >> discovered,
>> >> >> by trial and error, that I was only able to receive CBS and ABC if
>> >> >> I
>> >> >> first
>> >> >> selected the 47-1 in the 21-1 channels. It's as though there is a
>> >> >> signal
>> >> >> compliment that is missing in, say, 10-1 and is present in 47-1.
>> >> >> Furthermore,
>> >> >> that compliment has to be passed to the tuner before thecomplement
>> >> >> contained
>> >> >> in 10-1. I know this sounds weird, but I have had other, local,
>> >> >> techs
>> >> >> say
>> >> >> this is plausible. It's just no one seems to have a fix for it.
>> >> >> However,
>> >> >> I
>> >> >> follow your reasoning and delete 47-1 and see what happens.
>> >> >>
>> >> >> "Curious" wrote:
>> >> >>
>> >> >> > I think your symptoms are caused by the fact that both 47-1 and
>> >> >> > 10-1
>> >> >> > are CBS
>> >> >> > affiliates and 12-1 and 21-1 are both ABC affiliates. You
>> >> >> > possibly
>> >> >> > need to
>> >> >> > delete one of the CBS channels and one of the ABC channels from
>> >> >> > your
>> >> >> > guide.
>> >> >> >
>> >> >> > "snjmc" <> wrote in message
>> >> >> > news:FB6B4511-B57B-4E6D-BEBC-...
>> >> >> > >
>> >> >> > >
>> >> >> > > "Curious" wrote:
>> >> >> > >
>> >> >> > >> What zip code are you in?
>> >> >> > >>
>> >> >> > >> "snjmc" <> wrote in message
>> >> >> > >> news:106D93B1-D420-4B41-97B6-...
>> >> >> > >> >
>> >> >> > >> >
>> >> >> > >> > "Barb Bowman" wrote:
>> >> >> > >> >
>> >> >> > >> >> looks similar to
>> >> >> > >> >> http://thegreenbutton.com/forums/p/7...60.aspx#389860
>> >> >> > >> >>
>> >> >> > >> >> if you are using the most recent drivers, you might want to
>> >> >> > >> >> start
>> >> >> > >> >> a
>> >> >> > >> >> thread on
>> >> >> > >> >> thegreenbutton.com as well as here.
>> >> >> > >> >>
>> >> >> > >> >> On Fri, 27 Nov 2009 23:24:01 -0800, snjmc
>> >> >> > >> >> <>
>> >> >> > >> >> wrote:
>> >> >> > >> >>
>> >> >> > >> >> >Selecting Channel 47.1, getting a no signal message, then
>> >> >> > >> >> >tuning
>> >> >> > >> >> >channel
>> >> >> > >> >> >10.1
>> >> >> > >> >> >produces an almost always good picture, but if I select
>> >> >> > >> >> >10.1
>> >> >> > >> >> >first I
>> >> >> > >> >> >get
>> >> >> > >> >> >no
>> >> >> > >> >> >signal.
>> >> >> > >> >> >I get the same result by turning channel 21.1, then
>> >> >> > >> >> >channel
>> >> >> > >> >> >12.1.
>> >> >> > >> >> >I am no issues such as this with any of the other 3 OTA
>> >> >> > >> >> >ATSC
>> >> >> > >> >> >signals
>> >> >> > >> >> >available.
>> >> >> > >> >> >I removed my Vbox 164e and drivers and installed the
>> >> >> > >> >> >Hauppauge
>> >> >> > >> >> >2250
>> >> >> > >> >> >and
>> >> >> > >> >> >current drivers. In Media Center the Hauppauge performed
>> >> >> > >> >> >the
>> >> >> > >> >> >same way
>> >> >> > >> >> >as
>> >> >> > >> >> >the
>> >> >> > >> >> >Vbox, however the Hauppauge WinTV7 software connected with
>> >> >> > >> >> >all
>> >> >> > >> >> >the
>> >> >> > >> >> >available
>> >> >> > >> >> >ATSC signals flawlessly.
>> >> >> > >> >> Barb Bowman
>> >> >> > >> >> MS-MVP
>> >> >> > >> >> http://www.digitalmediaphile.com
>> >> >> > >> >> http://digitalmediaphile.wordpress.com
>> >> >> > >> >> .
>> >> >> > >> >> I have posted on Green Button a more wordy description of
>> >> >> > >> >> my
>> >> >> > >> >> problem.
>> >> >> > >> >> The
>> >> >> > >> >> link you provided was not helpful in that it dealt with
>> >> >> > >> >> QUAM
>> >> >> > >> >> issues
>> >> >> > >> >> and
>> >> >> > >> >> in other ways did not fit my situation. I visited your
>> >> >> > >> >> webpages,
>> >> >> > >> >> but
>> >> >> > >> >> did
>> >> >> > >> >> not see any solution to my problem. Perhaps you could
>> >> >> > >> >> direct
>> >> >> > >> >> me
>> >> >> > >> >> to
>> >> >> > >> >> some
>> >> >> > >> >> free software that would temporarily replace XP MCE, but
>> >> >> > >> >> still
>> >> >> > >> >> compatible
>> >> >> > >> >> to the Vbox 164e. If such replacement software does not
>> >> >> > >> >> exhibit
>> >> >> > >> >> the
>> >> >> > >> >> problem I'm having, they would give me more indication that
>> >> >> > >> >> my
>> >> >> > >> >> problem
>> >> >> > >> >> is
>> >> >> > >> >> with XP MCE. If I felt strongly enough, I might reinstall.
>> >> >> > >>
>> >> >> > >> .
>> >> >> > >> 97540
>> >> >> >
>> >> >> > .
>> >> >> >
>> >> .
>> >>
>> .
>>