Re: & nbsp; ????

The " " is an HTML code for a non-breaking space.

Are you seeing that while composing? Or only after sending?

If you are typing directly into WLM, I wouldn't expect WLM to be
generating those. And even if it did, it shouldn't cause any problems
for those reading the messages.

Are you composing in another program (e.g. MS Word) and then pasting
into Windows Live Mail?

About the only way you should see the code is if you copy/paste HTML
source code into a plain text message.

--

Mike - http://TechHelp.Santovec.us



"Ila Bartoe" <> wrote in message
news:#...
> I keep getting this "& nbsp;" in my emails and postings to my
> newsgroups?
>
> Any idea on how I can make it stop. It gets annoying for my readers to
> read what I am saying
> with this garbage. I'm sure its just a setting?
>
> --
> Ila Bartoe
>
>

It is while typing the message into WLM. I only see it, and the reader sees it, after the
message has been sent.

I changed the Read option to Read in Plain Text, but that is no fun - takes some of the
formatting out of the
emails that I get?

Any suggestions?

--
Ila Bartoe


"Michael Santovec" <> wrote in message
news:...
> The "&nbsp;" is an HTML code for a non-breaking space.
>
> Are you seeing that while composing? Or only after sending?
>
> If you are typing directly into WLM, I wouldn't expect WLM to be generating those. And even
> if it did, it shouldn't cause any problems for those reading the messages.
>
> Are you composing in another program (e.g. MS Word) and then pasting into Windows Live Mail?
>
> About the only way you should see the code is if you copy/paste HTML source code into a plain
> text message.
>
> --
>
> Mike - http://TechHelp.Santovec.us
>
>
>
> "Ila Bartoe" <> wrote in message
> news:#...
>> I keep getting this "& nbsp;" in my emails and postings to my newsgroups?
>>
>> Any idea on how I can make it stop. It gets annoying for my readers to read what I am saying
>> with this garbage. I'm sure its just a setting?
>>
>> --
>> Ila Bartoe
>>
>>
>

At [Tools >] Options > Send > HTML Settings, try changing the MIME encoding
to Base64. Does the problem still occur?
--
Noel

"Ila Bartoe" <> wrote in message
news:#...
> It is while typing the message into WLM. I only see it, and the reader
> sees it, after the message has been sent.
>
> I changed the Read option to Read in Plain Text, but that is no fun -
> takes some of the formatting out of the emails that I get?
>
> Any suggestions?

> "Michael Santovec" <> wrote in message
> news:...
>> The "&nbsp;" is an HTML code for a non-breaking space.
>>
>> Are you seeing that while composing? Or only after sending?
>>
>> If you are typing directly into WLM, I wouldn't expect WLM to be
>> generating those. And even if it did, it shouldn't cause any problems
>> for those reading the messages.
>>
>> Are you composing in another program (e.g. MS Word) and then pasting
>> into Windows Live Mail?
>>
>> About the only way you should see the code is if you copy/paste HTML
>> source code into a plain text message.

>> "Ila Bartoe" <> wrote in message
>> news:#...
>>> I keep getting this "& nbsp;" in my emails and postings to my
>>> newsgroups?
>>>
>>> Any idea on how I can make it stop. It gets annoying for my readers to
>>> read what I am saying with this garbage. I'm sure its just a setting?

Thanks, let's test this out...
new para with a tab
new para with a tab
new para with a tab

--
Ila Bartoe


"Ildhund" <> wrote in message news:Oen$...
> At [Tools >] Options > Send > HTML Settings, try changing the MIME encoding
> to Base64. Does the problem still occur?
> --
> Noel
>
> "Ila Bartoe" <> wrote in message
> news:#...
>> It is while typing the message into WLM. I only see it, and the reader
>> sees it, after the message has been sent.
>>
>> I changed the Read option to Read in Plain Text, but that is no fun -
>> takes some of the formatting out of the emails that I get?
>>
>> Any suggestions?
>
>> "Michael Santovec" <> wrote in message
>> news:...
>>> The "&nbsp;" is an HTML code for a non-breaking space.
>>>
>>> Are you seeing that while composing? Or only after sending?
>>>
>>> If you are typing directly into WLM, I wouldn't expect WLM to be
>>> generating those. And even if it did, it shouldn't cause any problems
>>> for those reading the messages.
>>>
>>> Are you composing in another program (e.g. MS Word) and then pasting
>>> into Windows Live Mail?
>>>
>>> About the only way you should see the code is if you copy/paste HTML
>>> source code into a plain text message.
>
>>> "Ila Bartoe" <> wrote in message
>>> news:#...
>>>> I keep getting this "& nbsp;" in my emails and postings to my
>>>> newsgroups?
>>>>
>>>> Any idea on how I can make it stop. It gets annoying for my readers to
>>>> read what I am saying with this garbage. I'm sure its just a setting?
>
>
>

That was plain text. Try again with HTML...
--
Noel

"Ila Bartoe" <> wrote in message
news:...
> Thanks, let's test this out...
> new para with a tab
> new para with a tab
> new para with a tab

> "Ildhund" <> wrote in message
> news:Oen$...
>> At [Tools >] Options > Send > HTML Settings, try changing the MIME
>> encoding to Base64. Does the problem still occur?

>> "Ila Bartoe" <> wrote in message
>> news:#...
>>> It is while typing the message into WLM. I only see it, and the reader
>>> sees it, after the message has been sent.
>>>
>>> I changed the Read option to Read in Plain Text, but that is no fun -
>>> takes some of the formatting out of the emails that I get?
>>>
>>> Any suggestions?
>>
>>> "Michael Santovec" <> wrote in message
>>> news:...
>>>> The "&nbsp;" is an HTML code for a non-breaking space.
>>>>
>>>> Are you seeing that while composing? Or only after sending?
>>>>
>>>> If you are typing directly into WLM, I wouldn't expect WLM to be
>>>> generating those. And even if it did, it shouldn't cause any problems
>>>> for those reading the messages.
>>>>
>>>> Are you composing in another program (e.g. MS Word) and then pasting
>>>> into Windows Live Mail?
>>>>
>>>> About the only way you should see the code is if you copy/paste HTML
>>>> source code into a plain text message.
>>
>>>> "Ila Bartoe" <> wrote in message
>>>> news:#...
>>>>> I keep getting this "& nbsp;" in my emails and postings to my
>>>>> newsgroups?
>>>>>
>>>>> Any idea on how I can make it stop. It gets annoying for my readers
>>>>> to read what I am saying with this garbage. I'm sure its just a
>>>>> setting?

Well, that looks fine; it was B64 encoded, but it's still plain text. On
the Properties > Advanced tab for this news account, try selecting 'Ignore
News sending format and post using:' > HTML. Remember to switch it off
again when we've got this sorted out. You should also try with some test
mail messages to yourself.
--
Noel

"Ila Bartoe" <> wrote in message
news:...
> both of the settings for HTML
> and Plain Text were changed
> as recommended.
> How does this read?
> Is the &nbsp gone?

> "Ildhund" <> wrote in message
> news:...
>> That was plain text. Try again with HTML...

>> "Ila Bartoe" <> wrote in message
>> news:...
>>> Thanks, let's test this out...
>>> new para with a tab
>>> new para with a tab
>>> new para with a tab
>>
>>> "Ildhund" <> wrote in message
>>> news:Oen$...
>>>> At [Tools >] Options > Send > HTML Settings, try changing the MIME
>>>> encoding to Base64. Does the problem still occur?
>>
>>>> "Ila Bartoe" <> wrote in message
>>>> news:#...
>>>>> It is while typing the message into WLM. I only see it, and the
>>>>> reader
>>>>> sees it, after the message has been sent.
>>>>>
>>>>> I changed the Read option to Read in Plain Text, but that is no fun -
>>>>> takes some of the formatting out of the emails that I get?
>>>>>
>>>>> Any suggestions?
>>>>
>>>>> "Michael Santovec" <> wrote in message
>>>>> news:...
>>>>>> The "&nbsp;" is an HTML code for a non-breaking space.
>>>>>>
>>>>>> Are you seeing that while composing? Or only after sending?
>>>>>>
>>>>>> If you are typing directly into WLM, I wouldn't expect WLM to be
>>>>>> generating those. And even if it did, it shouldn't cause any
>>>>>> problems
>>>>>> for those reading the messages.
>>>>>>
>>>>>> Are you composing in another program (e.g. MS Word) and then pasting
>>>>>> into Windows Live Mail?
>>>>>>
>>>>>> About the only way you should see the code is if you copy/paste HTML
>>>>>> source code into a plain text message.
>>>>
>>>>>> "Ila Bartoe" <> wrote in message
>>>>>> news:#...
>>>>>>> I keep getting this "& nbsp;" in my emails and postings to my
>>>>>>> newsgroups?
>>>>>>>
>>>>>>> Any idea on how I can make it stop. It gets annoying for my readers
>>>>>>> to read what I am saying with this garbage. I'm sure its just a
>>>>>>> setting?
>>
>>