and what about the option to install another webcam?
some shops offer the possibility to bring stuff back when it is not damaged.
(most of them
will pay cash back too in my country)
Maybe you can buy one, if it works then you know the problem is something
with the
webcam or driver from the webcam. If it's not working, then you can check
other things.
I got once usb1 cam plugged into an usb2.0 card. Got lots of trouble.
After buying an usb2.0 cam it works fine.
Maybe it is the usb slot itselfs, there are active and passive usb slots.
Hard to explain, but see it as if there is power on the usb slot itselfs.
Usb1 slots will often not recongnize the newer usb harddisks which don't
need an external power supply.
The power comes from the usb slot. Same problem with my scanner. It needs
the power from the usb slot,
there is no power supply needed for it.
But some usb slots are 'passive', and will not work with my scanner.
Solution is to buy (try) an usb hub with power suppy.
Succes with it !
"Techy_G" <> schreef in bericht
news:65FB101A-2FF9-4CEE-8ACD-...
> yes automatic updates is enabled. and yes i have done the second question
> too. everything is done, that you have suggested
>
> "PA Bear [MS MVP]" wrote:
>
>> Unfortunately you've still not answered either of my question so I have
>> nothing further to add to this conversation.
>>
>> Techy_G wrote:
>> > ok so never mind, i talked too fast, in the new version i was able to
>> > go
>> > into the main setup for audio and video without WLM freezing up. but
>> > when
>> > i
>> > start the webcam in a convo it works right up until the other person
>> > accepts the invitation. the all hell brakes loose and freezes right
>> > back
>> > up.
>> >
>> > "Techy_G" wrote:
>> >
>> >> well ya obviously i have all the updates off windows update... but no
>> >> worries it was the version 8.5 of WLM that was the problem. some
>> >> glitch
>> >> in
>> >> it i guess. because i just installed the newest one, the 2009 version
>> >> and
>> >> the cam works fine once again.
>> >> so it was a WLM screw up
>> >>
>> >>
>> >> "PA Bear [MS MVP]" wrote:
>> >>> Is Automatic Updates enabled?
>> >>>
>> >>> Can you do the following successfully?...
>> >>>
>> >>> 1. Go to http://windowsupdate.microsoft.com;
>> >>>
>> >>> 2. Install any required Windows Update-related software, if offered,
>> >>> then
>> >>> click CONTINUE;
>> >>>
>> >>> 3. Select CUSTOM and scan;
>> >>>
>> >>> 4. Select & install any critical security updates offered; follow all
>> >>> prompts.
>> >>>
>> >>> NB: I would not recommend installing IE7 via Windows Update if it's
>> >>> not
>> >>> already installed. If IE7 is already installed, look for a Root
>> >>> Certificates update in Optional category; if it's available, install
>> >>> it
>> >>> to
>> >>> take full advantage of IE7's enhanced security. (Root Certificates
>> >>> updates are not offered via Automatic Updates, for some unfathomable
>> >>> reason.) --
>> >>> ~PA Bear
>> >>>
>> >>> Techy_G wrote:
>> >>>> WLM version 8.5.1302.1018
>> >>>>
>> >>>> "PA Bear [MS MVP]" wrote:
>> >>>>> [Forwarded to WLMessenger newsgroup via crosspost]
>> >>>>>
>> >>>>> What version of WLMessenger is installed?
>> >>>>>
>> >>>>> Free unlimited installation and compatibility support is available
>> >>>>> for
>> >>>>> Windows XP, but only for Service Pack 3 (SP3) and *only until* 14
>> >>>>> Apr-09. (Chat and e-mail support is available only in the United
>> >>>>> States
>> >>>>> and Canada.) Go to
>> >>>>> http://support.microsoft.com/oas/def...spx?gprid=1173 | select
>> >>>>> "Windows XP" then select "Windows XP Service Pack 3" --
>> >>>>> ~Robear Dyer (PA Bear)
>> >>>>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
>> >>>>> AumHa VSOP & Admin http://aumha.net
>> >>>>> DTS-L http://dts-l.net/
>> >>>>>
>> >>>>> Techy_G wrote:
>> >>>>>> Hi, my main issue at this time, i believe it may be related to
>> >>>>>> sp3.
>> >>>>>> but
>> >>>>>> not
>> >>>>>> certain. I have recently formatted my computer. multiple times.
>> >>>>>> and
>> >>>>>> after
>> >>>>>> installing Windows Live Messenger, and my webcam. both seperately,
>> >>>>>> when
>> >>>>>> i
>> >>>>>> go
>> >>>>>> in the audio and video setup in WLM as soon as i click the option
>> >>>>>> to
>> >>>>>> edit
>> >>>>>> or
>> >>>>>> set it up, WLM freezes up and the only way to close it is to
>> >>>>>> control
>> >>>>>> alt delete it.
>> >>>>>>
>> >>>>>> i've even tried going back to an older version of WLM and still
>> >>>>>> the
>> >>>>>> same problem, i've updated the webcam, with logitechs newest up
>> >>>>>> dates
>> >>>>>> and still
>> >>>>>> nothing but freezing.
>> >>>>>>
>> >>>>>> what is causing this, or how can I fix it?
>>
>>
Similar Threads
Linear Mode
