Re: ehshell.exe problem

Download and install:- Microsoft .NET Framework Version 1.1 Redistributable
Package

http://www.microsoft.com/downloads/d...DisplayLang=en


How to determine the version of Media Center that you are running
http://support.microsoft.com/kb/837707

regards,
S.Sengupta[MS-MVP]




"Douglas Tatelman" <> wrote in message
news:15acdd91-bebc-40d3-88e0-...
> Hi fellow MCE users.
>
> I've had an unpleasant week with my favorite computer. It got into a
> blue screen failure that I couldn't even boot to safe mode.
>
> I finally brought it to my trusted PC doctor, who has never failed me.
>
> BUT, this time it looks like he reinstalled the OS and I can't get MCE
> to run.
>
> I'm on MCE XP Service Pack 3 It used to say version 2005, but now it
> says 2002!
>
> The exact message .... ehshell.exe - Common Language Runtime
> Debugging Services
>
> Application has generated an exception that could not be handled.
>
> Process id=0x18ac (6316), Thread id=0x18b0(6320)
>
>
> I've tried to back out Service Pack 3, but it's not even listed in the
> Remove programs. I've done the 2006 MCE rollup.
>
>
> Any suggestions?
>
> Here's the crash file...
>
>
> Unhandled Exception - 11/17/2009 7:13:44 AM
> Message: Unknown Keyframe type light at Line#2297 Pos #14. Keyframe
> types are case sensitive, did you accidentally put an upper case
> character?
> Exception:
> System.Exception: Unknown Keyframe type light at Line#2297 Pos #14.
> Keyframe types are case sensitive, did you accidentally put an upper
> case character?
> at ServiceBus.UIFramework.AnimationDescription.Keyfra meParse
> (XmlTextReader xmlRead)
> at ServiceBus.UIFramework.AnimationDescription.Sequen ceParse
> (XmlTextReader xmlRead, String& stID)
> at ServiceBus.UIFramework.AnimationDescription.Parse( XmlTextReader
> xmlRead)
> at ServiceBus.UIFramework.AnimationDescription.LoadAn imationRef
> (String reference)
> at ServiceBus.UIFramework.PageBasedUCPService.OnRende rerConnected
> (Object sender, EventArgs args)
> at eHome.UI.UiSession.OnConnect(Object sender, EventArgs args)
> at eHome.UI.RenderingSession.OnConnectionReady(Object sender,
> EventArgs args)
> at
> eHome.UI.Remote.RenderPort.eHome.Protocols.Splash. Messaging.IRenderPortCallback.OnPingReply
> (RENDERHANDLE target)
> at
> eHome.Protocols.Splash.Messaging.LocalRenderPortCa llback.Dispatch_OnPingReply
> (RenderPort _priv_port, IRenderPortCallback _priv_target,
> Msg1_OnPingReply* _priv_pmsg)
> at
> eHome.Protocols.Splash.Messaging.LocalRenderPortCa llback.DispatchCallback
> (RenderPort port, IRenderHandleOwner owner, CallbackMessage* message)
> at eHome.UI.Remote.RenderPort.DispatchCallbackMessage (UInt32
> idCallback, CallbackMessage* message)
> at eHome.UI.Remote.RenderPort.ProcessMessageBuffer(Bu fferInfo*
> pBufferInfo, Void* pvBufferData)
> at eHome.UI.MessagingSession.OnIncomingMessageBuffer( IntPtr pData,
> UInt32 hContext, BufferInfo* pBufferInfo, Void* pvBufferData)
> at eHome.Native.RenderApi.SpPeekMessage(MSG& msg, HWND hwnd, UInt32
> nMsgFilterMin, UInt32 nMsgFilterMax, UInt32 wRemoveMsg, WorkResult&
> nResult)
> at eHome.UI.Dispatcher.DispatchNextWin32Message(Boole an& fQuit)
> at eHome.UI.Dispatcher.MainLoopBody(Feeder feeder)
> at eHome.UI.Dispatcher.MainLoop(LoopCondition condition, LoopBody
> body)
> at eHome.UI.Dispatcher.MainLoop(LoopCondition loopCondition)
> at eHome.UI.Application.Run()
> at ServiceBus.UIFramework.PageBasedUCPService.Run()
> at ServiceBus.UIFramework.UserControlPoint.Main(Strin g[] args)
>
>
>
>
>
> __________ Information from ESET Smart Security, version of virus
> signature database 4614 (20091117) __________
>
> The message was checked by ESET Smart Security.
>
> http://www.eset.com
>
>
>

__________ Information from ESET Smart Security, version of virus signature database 4614 (20091117) __________

The message was checked by ESET Smart Security.

http://www.eset.com

Try the following:-

Start >run and type in: cmd

in the Command Prompt window type the following commands and press the Enter
key after the each command:-

Type: regsvr32.exe atl.dll
Type: cd \
Type: cd windows
Type: cd eHome
Type: ehSched /unregServer
Type: ehSched /service
Type: ehRecvr /unregServer
Type: ehRecvr /service
Type: ehRec.exe /unregServer
Type: ehRec.exe /regserver
Type: ehmsas.exe /unregServer
Type: ehmsas.exe /regserver

Restart Media Center.

regards,
S.Sengupta[MS-MVP]


"Douglas Tatelman" <> wrote in message
news:57abbbef-18b3-4067-9b39-...
> Thanks,
>
> I downloaded and ran the dot net install. I'm not sure if it
> finished, it said something like checking configuration, then the
> install window closed.
>
> Anyway, still the same error message. Any other ideas.
>
> I'll continue Googling for other answers.
>
> Thanks again.
>
>
> On Nov 17, 9:22 am, "S.Sengupta" <ssenup...@msn.com.invalid> wrote:
>> Download and install:- Microsoft .NET Framework Version 1.1
>> Redistributable
>> Package
>>
>> http://www.microsoft.com/downloads/d...D=262d25e3-f58...
>>
>> How to determine the version of Media Center that you are
>> runninghttp://support.microsoft.com/kb/837707
>>
>> regards,
>> S.Sengupta[MS-MVP]
>>
>> "Douglas Tatelman" <doug...@pickteam.com> wrote in message
>>
>> news:15acdd91-bebc-40d3-88e0-...
>>
>>
>>
>>
>>
>> > Hi fellow MCE users.
>>
>> > I've had an unpleasant week with my favorite computer. It got into a
>> > blue screen failure that I couldn't even boot to safe mode.
>>
>> > I finally brought it to my trusted PC doctor, who has never failed me.
>>
>> > BUT, this time it looks like he reinstalled the OS and I can't get MCE
>> > to run.
>>
>> > I'm on MCE XP Service Pack 3 It used to say version 2005, but now it
>> > says 2002!
>>
>> > The exact message .... ehshell.exe - Common Language Runtime
>> > Debugging Services
>>
>> > Application has generated an exception that could not be handled.
>>
>> > Process id=0x18ac (6316), Thread id=0x18b0(6320)
>>
>> > I've tried to back out Service Pack 3, but it's not even listed in the
>> > Remove programs. I've done the 2006 MCE rollup.
>>
>> > Any suggestions?
>>
>> > Here's the crash file...
>>
>> > Unhandled Exception - 11/17/2009 7:13:44 AM
>> > Message: Unknown Keyframe type light at Line#2297 Pos #14. Keyframe
>> > types are case sensitive, did you accidentally put an upper case
>> > character?
>> > Exception:
>> > System.Exception: Unknown Keyframe type light at Line#2297 Pos #14.
>> > Keyframe types are case sensitive, did you accidentally put an upper
>> > case character?
>> > at ServiceBus.UIFramework.AnimationDescription.Keyfra meParse
>> > (XmlTextReader xmlRead)
>> > at ServiceBus.UIFramework.AnimationDescription.Sequen ceParse
>> > (XmlTextReader xmlRead, String& stID)
>> > at ServiceBus.UIFramework.AnimationDescription.Parse( XmlTextReader
>> > xmlRead)
>> > at ServiceBus.UIFramework.AnimationDescription.LoadAn imationRef
>> > (String reference)
>> > at ServiceBus.UIFramework.PageBasedUCPService.OnRende rerConnected
>> > (Object sender, EventArgs args)
>> > at eHome.UI.UiSession.OnConnect(Object sender, EventArgs args)
>> > at eHome.UI.RenderingSession.OnConnectionReady(Object sender,
>> > EventArgs args)
>> > at
>> > eHome.UI.Remote.RenderPort.eHome.Protocols.Splash. Messaging.IRenderPortCall
>> > back.OnPingReply
>> > (RENDERHANDLE target)
>> > at
>> > eHome.Protocols.Splash.Messaging.LocalRenderPortCa llback.Dispatch_OnPingRep
>> > ly
>> > (RenderPort _priv_port, IRenderPortCallback _priv_target,
>> > Msg1_OnPingReply* _priv_pmsg)
>> > at
>> > eHome.Protocols.Splash.Messaging.LocalRenderPortCa llback.DispatchCallback
>> > (RenderPort port, IRenderHandleOwner owner, CallbackMessage* message)
>> > at eHome.UI.Remote.RenderPort.DispatchCallbackMessage (UInt32
>> > idCallback, CallbackMessage* message)
>> > at eHome.UI.Remote.RenderPort.ProcessMessageBuffer(Bu fferInfo*
>> > pBufferInfo, Void* pvBufferData)
>> > at eHome.UI.MessagingSession.OnIncomingMessageBuffer( IntPtr pData,
>> > UInt32 hContext, BufferInfo* pBufferInfo, Void* pvBufferData)
>> > at eHome.Native.RenderApi.SpPeekMessage(MSG& msg, HWND hwnd, UInt32
>> > nMsgFilterMin, UInt32 nMsgFilterMax, UInt32 wRemoveMsg, WorkResult&
>> > nResult)
>> > at eHome.UI.Dispatcher.DispatchNextWin32Message(Boole an& fQuit)
>> > at eHome.UI.Dispatcher.MainLoopBody(Feeder feeder)
>> > at eHome.UI.Dispatcher.MainLoop(LoopCondition condition, LoopBody
>> > body)
>> > at eHome.UI.Dispatcher.MainLoop(LoopCondition loopCondition)
>> > at eHome.UI.Application.Run()
>> > at ServiceBus.UIFramework.PageBasedUCPService.Run()
>> > at ServiceBus.UIFramework.UserControlPoint.Main(Strin g[] args)
>>
>> > __________ Information from ESET Smart Security, version of virus
>> > signature database 4614 (20091117) __________
>>
>> > The message was checked by ESET Smart Security.
>>
>> >http://www.eset.com
>>
>> __________ Information from ESET Smart Security, version of virus
>> signature database 4614 (20091117) __________
>>
>> The message was checked by ESET Smart Security.
>>
>> http://www.eset.com
>
>
> __________ Information from ESET Smart Security, version of virus
> signature database 4614 (20091117) __________
>
> The message was checked by ESET Smart Security.
>
> http://www.eset.com
>
>
>

__________ Information from ESET Smart Security, version of virus signature database 4614 (20091117) __________

The message was checked by ESET Smart Security.

http://www.eset.com

1] Download and install .NET Framework Cleanup Tool. This can be downloaded
from the following locations:-

http://cid-27e6a35d1a492af7.skydrive...eanup_tool.zip
http://blogs.msdn.com/astebner/attachment/8904493.ashx

2] Reinstall Microsoft .NET Framework 1.1

http://www.microsoft.com/downloads/d...displaylang=en

3] Reinstall Microsoft .NET Framework 1.1 Service Pack 1

http://www.microsoft.com/downloads/d...displaylang=en

4] Install Update Rollup 2 for Windows XP Media Center Edition 2005
(KB900325)

http://www.microsoft.com/downloads/d...displaylang=en

Don't restart the machine.[Update Rollup 2 will not install if the Ident
value is 3.0 or higher. You can check this with Mark Salloway's Media Center
Ident Set tool which can be found at :-

http://salloway.org.uk/mediacenter/util/index.htm#ident

Select Autodetect (it should select version 3.0 based ).Now start installing
Update Rollup 2 for Windows XP Media Center Edition 2005 (KB900325)



5] Download and install October 2006 Update Rollup for Windows XP Media
Center Edition 2005 (KB925766)

http://www.microsoft.com/downloads/d...displaylang=en

6] Restart.

7] Update all the necessary drivers-like tv tuner card etc.

regards,
S.Sengupta[MS-MVP]




"Douglas Tatelman" <> wrote in message
news:4e7a4def-9686-46fb-a94b-...
> I just found on the Grrenbutton site a long list of how to install mce
> 2005. I'm pretty sure this wasn't how it was done.
>
> But, if I knew what EhShell is trying to do - is it checking hardware?
> drivers? Then I could possibly troubleshoot.
>
> Can anyone decipher the crash message?
>
> Thank you
>
>
>> On Nov 17, 4:12 pm, "S.Sengupta" <ssengup...@msn.com.invalid> wrote:
>>
>>
>>
>> > Try the following:-
>>
>> > Start >run and type in: cmd
>>
>> > in the Command Prompt window type the following commands and press the
>> > Enter
>> > key after the each command:-
>>
>> > Type: regsvr32.exe atl.dll
>> > Type: cd \
>> > Type: cd windows
>> > Type: cd eHome
>> > Type: ehSched /unregServer
>> > Type: ehSched /service
>> > Type: ehRecvr /unregServer
>> > Type: ehRecvr /service
>> > Type: ehRec.exe /unregServer
>> > Type: ehRec.exe /regserver
>> > Type: ehmsas.exe /unregServer
>> > Type: ehmsas.exe /regserver
>>
>> > Restart Media Center.
>>
>> > regards,
>> > S.Sengupta[MS-MVP]
>>
>> > "Douglas Tatelman" <doug...@pickteam.com> wrote in message
>>
>> >news:57abbbef-18b3-4067-9b39-...
>>
>> > > Thanks,
>>
>> > > I downloaded and ran the dot net install. I'm not sure if it
>> > > finished, it said something like checking configuration, then the
>> > > install window closed.
>>
>> > > Anyway, still the same error message. Any other ideas.
>>
>> > > I'll continue Googling for other answers.
>>
>> > > Thanks again.
>>
>> > > On Nov 17, 9:22 am, "S.Sengupta" <ssenup...@msn.com.invalid> wrote:
>> > >> Download and install:- Microsoft .NET Framework Version 1.1
>> > >> Redistributable
>> > >> Package
>>
>> > >>http://www.microsoft.com/downloads/d...D=262d25e3-f58...
>>
>> > >> How to determine the version of Media Center that you are
>> > >> runninghttp://support.microsoft.com/kb/837707
>>
>> > >> regards,
>> > >> S.Sengupta[MS-MVP]
>>
>> > >> "Douglas Tatelman" <doug...@pickteam.com> wrote in message
>>
>> > >>news:15acdd91-bebc-40d3-88e0-...
>>
>> > >> > Hi fellow MCE users.
>>
>> > >> > I've had an unpleasant week with my favorite computer. It got
>> > >> > into a
>> > >> > blue screen failure that I couldn't even boot to safe mode.
>>
>> > >> > I finally brought it to my trusted PC doctor, who has never failed
>> > >> > me.
>>
>> > >> > BUT, this time it looks like he reinstalled the OS and I can't get
>> > >> > MCE
>> > >> > to run.
>>
>> > >> > I'm on MCE XP Service Pack 3 It used to say version 2005, but now
>> > >> > it
>> > >> > says 2002!
>>
>> > >> > The exact message .... ehshell.exe - Common Language Runtime
>> > >> > Debugging Services
>>
>> > >> > Application has generated an exception that could not be handled.
>>
>> > >> > Process id=0x18ac (6316), Thread id=0x18b0(6320)
>>
>> > >> > I've tried to back out Service Pack 3, but it's not even listed in
>> > >> > the
>> > >> > Remove programs. I've done the 2006 MCE rollup.
>>
>> > >> > Any suggestions?
>>
>> > >> > Here's the crash file...
>>
>> > >> > Unhandled Exception - 11/17/2009 7:13:44 AM
>> > >> > Message: Unknown Keyframe type light at Line#2297 Pos #14.
>> > >> > Keyframe
>> > >> > types are case sensitive, did you accidentally put an upper case
>> > >> > character?
>> > >> > Exception:
>> > >> > System.Exception: Unknown Keyframe type light at Line#2297 Pos
>> > >> > #14.
>> > >> > Keyframe types are case sensitive, did you accidentally put an
>> > >> > upper
>> > >> > case character?
>> > >> > at ServiceBus.UIFramework.AnimationDescription.Keyfra meParse
>> > >> > (XmlTextReader xmlRead)
>> > >> > at ServiceBus.UIFramework.AnimationDescription.Sequen ceParse
>> > >> > (XmlTextReader xmlRead, String& stID)
>> > >> > at
>> > >> > ServiceBus.UIFramework.AnimationDescription.Parse( XmlTextReader
>> > >> > xmlRead)
>> > >> > at ServiceBus.UIFramework.AnimationDescription.LoadAn imationRef
>> > >> > (String reference)
>> > >> > at
>> > >> > ServiceBus.UIFramework.PageBasedUCPService.OnRende rerConnected
>> > >> > (Object sender, EventArgs args)
>> > >> > at eHome.UI.UiSession.OnConnect(Object sender, EventArgs args)
>> > >> > at eHome.UI.RenderingSession.OnConnectionReady(Object sender,
>> > >> > EventArgs args)
>> > >> > at
>> > >> > eHome.UI.Remote.RenderPort.eHome.Protocols.Splash. Messaging.IRenderPortCall
>> > >> > back.OnPingReply
>> > >> > (RENDERHANDLE target)
>> > >> > at
>> > >> > eHome.Protocols.Splash.Messaging.LocalRenderPortCa llback.Dispatch_OnPingRep
>> > >> > ly
>> > >> > (RenderPort _priv_port, IRenderPortCallback _priv_target,
>> > >> > Msg1_OnPingReply* _priv_pmsg)
>> > >> > at
>> > >> > eHome.Protocols.Splash.Messaging.LocalRenderPortCa llback.DispatchCallback
>> > >> > (RenderPort port, IRenderHandleOwner owner, CallbackMessage*
>> > >> > message)
>> > >> > at eHome.UI.Remote.RenderPort.DispatchCallbackMessage (UInt32
>> > >> > idCallback, CallbackMessage* message)
>> > >> > at eHome.UI.Remote.RenderPort.ProcessMessageBuffer(Bu fferInfo*
>> > >> > pBufferInfo, Void* pvBufferData)
>> > >> > at eHome.UI.MessagingSession.OnIncomingMessageBuffer( IntPtr
>> > >> > pData,
>> > >> > UInt32 hContext, BufferInfo* pBufferInfo, Void* pvBufferData)
>> > >> > at eHome.Native.RenderApi.SpPeekMessage(MSG& msg, HWND hwnd,
>> > >> > UInt32
>> > >> > nMsgFilterMin, UInt32 nMsgFilterMax, UInt32 wRemoveMsg,
>> > >> > WorkResult&
>> > >> > nResult)
>> > >> > at eHome.UI.Dispatcher.DispatchNextWin32Message(Boole an& fQuit)
>> > >> > at eHome.UI.Dispatcher.MainLoopBody(Feeder feeder)
>> > >> > at eHome.UI.Dispatcher.MainLoop(LoopCondition condition,
>> > >> > LoopBody
>> > >> > body)
>> > >> > at eHome.UI.Dispatcher.MainLoop(LoopCondition loopCondition)
>> > >> > at eHome.UI.Application.Run()
>> > >> > at ServiceBus.UIFramework.PageBasedUCPService.Run()
>> > >> > at ServiceBus.UIFramework.UserControlPoint.Main(Strin g[] args)
>>
>> > >> > __________ Information from ESET Smart Security, version of virus
>> > >> > signature database 4614 (20091117) __________
>>
>> > >> > The message was checked by ESET Smart Security.
>>
>> > >> >http://www.eset.com
>>
>> > >> __________ Information from ESET Smart Security, version of virus
>> > >> signature database 4614 (20091117) __________
>>
>> > >> The message was checked by ESET Smart Security.
>>
>> > >>http://www.eset.com
>>
>> > > __________ Information from ESET Smart Security, version of virus
>> > > signature database 4614 (20091117) __________
>>
>> > > The message was checked by ESET Smart Security.
>>
>> > >http://www.eset.com
>>
>> > __________ Information from ESET Smart Security, version of virus
>> > signature database 4614 (20091117) __________
>>
>> > The message was checked by ESET Smart Security.
>>
>> >http://www.eset.com
>
>
> __________ Information from ESET Smart Security, version of virus
> signature database 4615 (20091117) __________
>
> The message was checked by ESET Smart Security.
>
> http://www.eset.com
>
>
>

__________ Information from ESET Smart Security, version of virus signature database 4615 (20091117) __________

The message was checked by ESET Smart Security.

http://www.eset.com

Are you sure that the version number display from within MC says it is
MCE2002 or is the version number from the OS saying it is MCE 2002. I ask
since MCE 2005 uses XP 2002 as it's base.
The Home Premium and Ultimate versions of Windows 7 that have the Media
Center application.
Just because a machine has a ready for Vista on it does not mean that all of
the hardware devices connected to it have drivers for Vista 32 and for Vista
64 bit and that these drivers will also work for Win7/

"Douglas Tatelman" <> wrote in message
news:a0be3c07-837d-4aa7-bd27-...
> Whew,
>
> I did number one OK, I installed and RAN the .NET cleanup process.
> Number 2 1.1 reinstall went fine
> Number 3 1.1 service pack OK
> Number 4 - Rollup 2 didn't install like you said, then Mr Salloways
> program wouldn't run without .NET 2. I ended up just changing the
> registry. If I put a value of 3.0 or over, the rollup wouldn't
> unstall. If I put a number less than 3.0 it wouldn't install cause it
> said I had MCE 2002 not 2005.
>
> Thanks for your kind help. I am thinking seriously of installing
> Windows 7 - I believe it is the Home Premium version that has MCE?
>
> My dual core machine has a "ready for Vista" sitcker on it, so I hope
> it's good enough to run 7.
>
> Thanks again.
>
>
> On Nov 18, 4:44 pm, "S.Sengupta" <ssengup...@msn.com.invalid> wrote:
>> 1] Download and install .NET Framework Cleanup Tool. This can be
>> downloaded
>> from the following locations:-
>>
>> http://cid-27e6a35d1a492af7.skydrive...t/8904493.ashx
>>
>> 2] Reinstall Microsoft .NET Framework 1.1
>>
>> http://www.microsoft.com/downloads/d...d=262D25E3-F58...
>>
>> 3] Reinstall Microsoft .NET Framework 1.1 Service Pack 1
>>
>> http://www.microsoft.com/downloads/d...D=a8f5654f-088...
>>
>> 4] Install Update Rollup 2 for Windows XP Media Center Edition 2005
>> (KB900325)
>>
>> http://www.microsoft.com/downloads/d...D=e5daf37e-e24...
>>
>> Don't restart the machine.[Update Rollup 2 will not install if the
>> Ident
>> value is 3.0 or higher. You can check this with Mark Salloway's Media
>> Center
>> Ident Set tool which can be found at :-
>>
>> http://salloway.org.uk/mediacenter/util/index.htm#ident
>>
>> Select Autodetect (it should select version 3.0 based ).Now start
>> installing
>> Update Rollup 2 for Windows XP Media Center Edition 2005 (KB900325)
>>
>> 5] Download and install October 2006 Update Rollup for Windows XP Media
>> Center Edition 2005 (KB925766)
>>
>> http://www.microsoft.com/downloads/d...d=8A2E5868-C2B...
>>
>> 6] Restart.
>>
>> 7] Update all the necessary drivers-like tv tuner card etc.
>>
>> regards,
>> S.Sengupta[MS-MVP]
>>
>> "Douglas Tatelman" <doug...@pickteam.com> wrote in message
>>
>> news:4e7a4def-9686-46fb-a94b-...
>>
>>
>>
>>
>>
>> > I just found on the Grrenbutton site a long list of how to install mce
>> > 2005. I'm pretty sure this wasn't how it was done.
>>
>> > But, if I knew what EhShell is trying to do - is it checking hardware?
>> > drivers? Then I could possibly troubleshoot.
>>
>> > Can anyone decipher the crash message?
>>
>> > Thank you
>>
>> >> On Nov 17, 4:12 pm, "S.Sengupta" <ssengup...@msn.com.invalid> wrote:
>>
>> >> > Try the following:-
>>
>> >> > Start >run and type in: cmd
>>
>> >> > in the Command Prompt window type the following commands and press
>> >> > the
>> >> > Enter
>> >> > key after the each command:-
>>
>> >> > Type: regsvr32.exe atl.dll
>> >> > Type: cd \
>> >> > Type: cd windows
>> >> > Type: cd eHome
>> >> > Type: ehSched /unregServer
>> >> > Type: ehSched /service
>> >> > Type: ehRecvr /unregServer
>> >> > Type: ehRecvr /service
>> >> > Type: ehRec.exe /unregServer
>> >> > Type: ehRec.exe /regserver
>> >> > Type: ehmsas.exe /unregServer
>> >> > Type: ehmsas.exe /regserver
>>
>> >> > Restart Media Center.
>>
>> >> > regards,
>> >> > S.Sengupta[MS-MVP]
>>
>> >> > "Douglas Tatelman" <doug...@pickteam.com> wrote in message
>>
>> >> >news:57abbbef-18b3-4067-9b39-...
>>
>> >> > > Thanks,
>>
>> >> > > I downloaded and ran the dot net install. I'm not sure if it
>> >> > > finished, it said something like checking configuration, then the
>> >> > > install window closed.
>>
>> >> > > Anyway, still the same error message. Any other ideas.
>>
>> >> > > I'll continue Googling for other answers.
>>
>> >> > > Thanks again.
>>
>> >> > > On Nov 17, 9:22 am, "S.Sengupta" <ssenup...@msn.com.invalid>
>> >> > > wrote:
>> >> > >> Download and install:- Microsoft .NET Framework Version 1.1
>> >> > >> Redistributable
>> >> > >> Package
>>
>> >> > >>http://www.microsoft.com/downloads/d...D=262d25e3-f58...
>>
>> >> > >> How to determine the version of Media Center that you are
>> >> > >> runninghttp://support.microsoft.com/kb/837707
>>
>> >> > >> regards,
>> >> > >> S.Sengupta[MS-MVP]
>>
>> >> > >> "Douglas Tatelman" <doug...@pickteam.com> wrote in message
>>
>> >> > >>news:15acdd91-bebc-40d3-88e0-...
>>
>> >> > >> > Hi fellow MCE users.
>>
>> >> > >> > I've had an unpleasant week with my favorite computer. It got
>> >> > >> > into a
>> >> > >> > blue screen failure that I couldn't even boot to safe mode.
>>
>> >> > >> > I finally brought it to my trusted PC doctor, who has never
>> >> > >> > failed
>> >> > >> > me.
>>
>> >> > >> > BUT, this time it looks like he reinstalled the OS and I can't
>> >> > >> > get
>> >> > >> > MCE
>> >> > >> > to run.
>>
>> >> > >> > I'm on MCE XP Service Pack 3 It used to say version 2005, but
>> >> > >> > now
>> >> > >> > it
>> >> > >> > says 2002!
>>
>> >> > >> > The exact message .... ehshell.exe - Common Language Runtime
>> >> > >> > Debugging Services
>>
>> >> > >> > Application has generated an exception that could not be
>> >> > >> > handled.
>>
>> >> > >> > Process id=0x18ac (6316), Thread id=0x18b0(6320)
>>
>> >> > >> > I've tried to back out Service Pack 3, but it's not even listed
>> >> > >> > in
>> >> > >> > the
>> >> > >> > Remove programs. I've done the 2006 MCE rollup.
>>
>> >> > >> > Any suggestions?
>>
>> >> > >> > Here's the crash file...
>>
>> >> > >> > Unhandled Exception - 11/17/2009 7:13:44 AM
>> >> > >> > Message: Unknown Keyframe type light at Line#2297 Pos #14.
>> >> > >> > Keyframe
>> >> > >> > types are case sensitive, did you accidentally put an upper
>> >> > >> > case
>> >> > >> > character?
>> >> > >> > Exception:
>> >> > >> > System.Exception: Unknown Keyframe type light at Line#2297 Pos
>> >> > >> > #14.
>> >> > >> > Keyframe types are case sensitive, did you accidentally put an
>> >> > >> > upper
>> >> > >> > case character?
>> >> > >> > at ServiceBus.UIFramework.AnimationDescription.Keyfra meParse
>> >> > >> > (XmlTextReader xmlRead)
>> >> > >> > at ServiceBus.UIFramework.AnimationDescription.Sequen ceParse
>> >> > >> > (XmlTextReader xmlRead, String& stID)
>> >> > >> > at
>> >> > >> > ServiceBus.UIFramework.AnimationDescription.Parse( XmlTextReader
>> >> > >> > xmlRead)
>> >> > >> > at
>> >> > >> > ServiceBus.UIFramework.AnimationDescription.LoadAn imationRef
>> >> > >> > (String reference)
>> >> > >> > at
>> >> > >> > ServiceBus.UIFramework.PageBasedUCPService.OnRende rerConnected
>> >> > >> > (Object sender, EventArgs args)
>> >> > >> > at eHome.UI.UiSession.OnConnect(Object sender, EventArgs
>> >> > >> > args)
>> >> > >> > at eHome.UI.RenderingSession.OnConnectionReady(Object sender,
>> >> > >> > EventArgs args)
>> >> > >> > at
>> >> > >> > eHome.UI.Remote.RenderPort.eHome.Protocols.Splash. Messaging.IRenderPortCall
>> >> > >> > back.OnPingReply
>> >> > >> > (RENDERHANDLE target)
>> >> > >> > at
>> >> > >> > eHome.Protocols.Splash.Messaging.LocalRenderPortCa llback.Dispatch_OnPingRep
>> >> > >> > ly
>> >> > >> > (RenderPort _priv_port, IRenderPortCallback _priv_target,
>> >> > >> > Msg1_OnPingReply* _priv_pmsg)
>> >> > >> > at
>> >> > >> > eHome.Protocols.Splash.Messaging.LocalRenderPortCa llback.DispatchCallback
>> >> > >> > (RenderPort port, IRenderHandleOwner owner, CallbackMessage*
>> >> > >> > message)
>> >> > >> > at eHome.UI.Remote.RenderPort.DispatchCallbackMessage (UInt32
>> >> > >> > idCallback, CallbackMessage* message)
>> >> > >> > at
>> >> > >> > eHome.UI.Remote.RenderPort.ProcessMessageBuffer(Bu fferInfo*
>> >> > >> > pBufferInfo, Void* pvBufferData)
>> >> > >> > at eHome.UI.MessagingSession.OnIncomingMessageBuffer( IntPtr
>> >> > >> > pData,
>> >> > >> > UInt32 hContext, BufferInfo* pBufferInfo, Void* pvBufferData)
>> >> > >> > at eHome.Native.RenderApi.SpPeekMessage(MSG& msg, HWND hwnd,
>> >> > >> > UInt32
>> >> > >> > nMsgFilterMin, UInt32 nMsgFilterMax, UInt32 wRemoveMsg,
>> >> > >> > WorkResult&
>> >> > >> > nResult)
>> >> > >> > at eHome.UI.Dispatcher.DispatchNextWin32Message(Boole an&
>> >> > >> > fQuit)
>> >> > >> > at eHome.UI.Dispatcher.MainLoopBody(Feeder feeder)
>> >> > >> > at eHome.UI.Dispatcher.MainLoop(LoopCondition condition,
>> >> > >> > LoopBody
>> >> > >> > body)
>> >> > >> > at eHome.UI.Dispatcher.MainLoop(LoopCondition loopCondition)
>> >> > >> > at eHome.UI.Application.Run()
>> >> > >> > at ServiceBus.UIFramework.PageBasedUCPService.Run()
>> >> > >> > at ServiceBus.UIFramework.UserControlPoint.Main(Strin g[]
>> >> > >> > args)
>>
>> >> > >> > __________ Information from ESET Smart Security, version of
>> >> > >> > virus
>> >> > >> > signature database 4614 (20091117) __________
>>
>> >> > >> > The message was checked by ESET Smart Security.
>>
>> >> > >> >http://www.eset.com
>>
>> >> > >> __________ Information from ESET Smart Security, version of virus
>> >> > >> signature database 4614 (20091117) __________
>>
>> >> > >> The message was checked by ESET Smart Security.
>>
>> >> > >>http://www.eset.com
>>
>> >> > > __________ Information from ESET Smart Security, version of virus
>> >> > > signature database 4614 (20091117) __________
>>
>> >> > > The message was checked by ESET Smart Security.
>>
>> >> > >http://www.eset.com
>>
>> >> > __________ Information from ESET Smart Security, version of virus
>> >> > signature database 4614 (20091117) __________
>>
>> >> > The message was checked by ESET Smart Security.
>>
>> >> >http://www.eset.com
>>
>> > __________ Information from ESET Smart Security, version of virus
>> > signature database 4615 (20091117) __________
>>
>> > The message was checked by ESET Smart Security.
>>
>> >http://www.eset.com
>>
>> __________ Information from ESET Smart Security, version of virus
>> signature database 4615 (20091117) __________
>>
>> The message was checked by ESET Smart Security.
>>
>> http://www.eset.com
>

When did you buy this machine?

If the dual core machine has a "ready for Vista" sitcker on it, then I
think you have Windows XP MCE 2005.

How to manually install the various pieces of Update Rollup 2 for Media
Center 2005
http://blogs.msdn.com/astebner/archi...22/604380.aspx

MceRepair tool is also available:-
http://blogs.msdn.com/peterrosser/ar...20/482974.aspx

Yes,Windows 7 Home Premium has Windows Media Center.

regards,
S.Sengupta[MS-MVP]


"Douglas Tatelman" <> wrote in message
news:a0be3c07-837d-4aa7-bd27-...
> Whew,
>
> I did number one OK, I installed and RAN the .NET cleanup process.
> Number 2 1.1 reinstall went fine
> Number 3 1.1 service pack OK
> Number 4 - Rollup 2 didn't install like you said, then Mr Salloways
> program wouldn't run without .NET 2. I ended up just changing the
> registry. If I put a value of 3.0 or over, the rollup wouldn't
> unstall. If I put a number less than 3.0 it wouldn't install cause it
> said I had MCE 2002 not 2005.
>
> Thanks for your kind help. I am thinking seriously of installing
> Windows 7 - I believe it is the Home Premium version that has MCE?
>
> My dual core machine has a "ready for Vista" sitcker on it, so I hope
> it's good enough to run 7.
>
> Thanks again.
>
>
> On Nov 18, 4:44 pm, "S.Sengupta" <ssengup...@msn.com.invalid> wrote:
>> 1] Download and install .NET Framework Cleanup Tool. This can be
>> downloaded
>> from the following locations:-
>>
>> http://cid-27e6a35d1a492af7.skydrive...t/8904493.ashx
>>
>> 2] Reinstall Microsoft .NET Framework 1.1
>>
>> http://www.microsoft.com/downloads/d...d=262D25E3-F58...
>>
>> 3] Reinstall Microsoft .NET Framework 1.1 Service Pack 1
>>
>> http://www.microsoft.com/downloads/d...D=a8f5654f-088...
>>
>> 4] Install Update Rollup 2 for Windows XP Media Center Edition 2005
>> (KB900325)
>>
>> http://www.microsoft.com/downloads/d...D=e5daf37e-e24...
>>
>> Don't restart the machine.[Update Rollup 2 will not install if the
>> Ident
>> value is 3.0 or higher. You can check this with Mark Salloway's Media
>> Center
>> Ident Set tool which can be found at :-
>>
>> http://salloway.org.uk/mediacenter/util/index.htm#ident
>>
>> Select Autodetect (it should select version 3.0 based ).Now start
>> installing
>> Update Rollup 2 for Windows XP Media Center Edition 2005 (KB900325)
>>
>> 5] Download and install October 2006 Update Rollup for Windows XP Media
>> Center Edition 2005 (KB925766)
>>
>> http://www.microsoft.com/downloads/d...d=8A2E5868-C2B...
>>
>> 6] Restart.
>>
>> 7] Update all the necessary drivers-like tv tuner card etc.
>>
>> regards,
>> S.Sengupta[MS-MVP]
>>
>> "Douglas Tatelman" <doug...@pickteam.com> wrote in message
>>
>> news:4e7a4def-9686-46fb-a94b-...
>>
>>
>>
>>
>>
>> > I just found on the Grrenbutton site a long list of how to install mce
>> > 2005. I'm pretty sure this wasn't how it was done.
>>
>> > But, if I knew what EhShell is trying to do - is it checking hardware?
>> > drivers? Then I could possibly troubleshoot.
>>
>> > Can anyone decipher the crash message?
>>
>> > Thank you
>>
>> >> On Nov 17, 4:12 pm, "S.Sengupta" <ssengup...@msn.com.invalid> wrote:
>>
>> >> > Try the following:-
>>
>> >> > Start >run and type in: cmd
>>
>> >> > in the Command Prompt window type the following commands and press
>> >> > the
>> >> > Enter
>> >> > key after the each command:-
>>
>> >> > Type: regsvr32.exe atl.dll
>> >> > Type: cd \
>> >> > Type: cd windows
>> >> > Type: cd eHome
>> >> > Type: ehSched /unregServer
>> >> > Type: ehSched /service
>> >> > Type: ehRecvr /unregServer
>> >> > Type: ehRecvr /service
>> >> > Type: ehRec.exe /unregServer
>> >> > Type: ehRec.exe /regserver
>> >> > Type: ehmsas.exe /unregServer
>> >> > Type: ehmsas.exe /regserver
>>
>> >> > Restart Media Center.
>>
>> >> > regards,
>> >> > S.Sengupta[MS-MVP]
>>
>> >> > "Douglas Tatelman" <doug...@pickteam.com> wrote in message
>>
>> >> >news:57abbbef-18b3-4067-9b39-...
>>
>> >> > > Thanks,
>>
>> >> > > I downloaded and ran the dot net install. I'm not sure if it
>> >> > > finished, it said something like checking configuration, then the
>> >> > > install window closed.
>>
>> >> > > Anyway, still the same error message. Any other ideas.
>>
>> >> > > I'll continue Googling for other answers.
>>
>> >> > > Thanks again.
>>
>> >> > > On Nov 17, 9:22 am, "S.Sengupta" <ssenup...@msn.com.invalid>
>> >> > > wrote:
>> >> > >> Download and install:- Microsoft .NET Framework Version 1.1
>> >> > >> Redistributable
>> >> > >> Package
>>
>> >> > >>http://www.microsoft.com/downloads/d...D=262d25e3-f58...
>>
>> >> > >> How to determine the version of Media Center that you are
>> >> > >> runninghttp://support.microsoft.com/kb/837707
>>
>> >> > >> regards,
>> >> > >> S.Sengupta[MS-MVP]
>>
>> >> > >> "Douglas Tatelman" <doug...@pickteam.com> wrote in message
>>
>> >> > >>news:15acdd91-bebc-40d3-88e0-...
>>
>> >> > >> > Hi fellow MCE users.
>>
>> >> > >> > I've had an unpleasant week with my favorite computer. It got
>> >> > >> > into a
>> >> > >> > blue screen failure that I couldn't even boot to safe mode.
>>
>> >> > >> > I finally brought it to my trusted PC doctor, who has never
>> >> > >> > failed
>> >> > >> > me.
>>
>> >> > >> > BUT, this time it looks like he reinstalled the OS and I can't
>> >> > >> > get
>> >> > >> > MCE
>> >> > >> > to run.
>>
>> >> > >> > I'm on MCE XP Service Pack 3 It used to say version 2005, but
>> >> > >> > now
>> >> > >> > it
>> >> > >> > says 2002!
>>
>> >> > >> > The exact message .... ehshell.exe - Common Language Runtime
>> >> > >> > Debugging Services
>>
>> >> > >> > Application has generated an exception that could not be
>> >> > >> > handled.
>>
>> >> > >> > Process id=0x18ac (6316), Thread id=0x18b0(6320)
>>
>> >> > >> > I've tried to back out Service Pack 3, but it's not even listed
>> >> > >> > in
>> >> > >> > the
>> >> > >> > Remove programs. I've done the 2006 MCE rollup.
>>
>> >> > >> > Any suggestions?
>>
>> >> > >> > Here's the crash file...
>>
>> >> > >> > Unhandled Exception - 11/17/2009 7:13:44 AM
>> >> > >> > Message: Unknown Keyframe type light at Line#2297 Pos #14.
>> >> > >> > Keyframe
>> >> > >> > types are case sensitive, did you accidentally put an upper
>> >> > >> > case
>> >> > >> > character?
>> >> > >> > Exception:
>> >> > >> > System.Exception: Unknown Keyframe type light at Line#2297 Pos
>> >> > >> > #14.
>> >> > >> > Keyframe types are case sensitive, did you accidentally put an
>> >> > >> > upper
>> >> > >> > case character?
>> >> > >> > at ServiceBus.UIFramework.AnimationDescription.Keyfra meParse
>> >> > >> > (XmlTextReader xmlRead)
>> >> > >> > at ServiceBus.UIFramework.AnimationDescription.Sequen ceParse
>> >> > >> > (XmlTextReader xmlRead, String& stID)
>> >> > >> > at
>> >> > >> > ServiceBus.UIFramework.AnimationDescription.Parse( XmlTextReader
>> >> > >> > xmlRead)
>> >> > >> > at
>> >> > >> > ServiceBus.UIFramework.AnimationDescription.LoadAn imationRef
>> >> > >> > (String reference)
>> >> > >> > at
>> >> > >> > ServiceBus.UIFramework.PageBasedUCPService.OnRende rerConnected
>> >> > >> > (Object sender, EventArgs args)
>> >> > >> > at eHome.UI.UiSession.OnConnect(Object sender, EventArgs
>> >> > >> > args)
>> >> > >> > at eHome.UI.RenderingSession.OnConnectionReady(Object sender,
>> >> > >> > EventArgs args)
>> >> > >> > at
>> >> > >> > eHome.UI.Remote.RenderPort.eHome.Protocols.Splash. Messaging.IRenderPortCall
>> >> > >> > back.OnPingReply
>> >> > >> > (RENDERHANDLE target)
>> >> > >> > at
>> >> > >> > eHome.Protocols.Splash.Messaging.LocalRenderPortCa llback.Dispatch_OnPingRep
>> >> > >> > ly
>> >> > >> > (RenderPort _priv_port, IRenderPortCallback _priv_target,
>> >> > >> > Msg1_OnPingReply* _priv_pmsg)
>> >> > >> > at
>> >> > >> > eHome.Protocols.Splash.Messaging.LocalRenderPortCa llback.DispatchCallback
>> >> > >> > (RenderPort port, IRenderHandleOwner owner, CallbackMessage*
>> >> > >> > message)
>> >> > >> > at eHome.UI.Remote.RenderPort.DispatchCallbackMessage (UInt32
>> >> > >> > idCallback, CallbackMessage* message)
>> >> > >> > at
>> >> > >> > eHome.UI.Remote.RenderPort.ProcessMessageBuffer(Bu fferInfo*
>> >> > >> > pBufferInfo, Void* pvBufferData)
>> >> > >> > at eHome.UI.MessagingSession.OnIncomingMessageBuffer( IntPtr
>> >> > >> > pData,
>> >> > >> > UInt32 hContext, BufferInfo* pBufferInfo, Void* pvBufferData)
>> >> > >> > at eHome.Native.RenderApi.SpPeekMessage(MSG& msg, HWND hwnd,
>> >> > >> > UInt32
>> >> > >> > nMsgFilterMin, UInt32 nMsgFilterMax, UInt32 wRemoveMsg,
>> >> > >> > WorkResult&
>> >> > >> > nResult)
>> >> > >> > at eHome.UI.Dispatcher.DispatchNextWin32Message(Boole an&
>> >> > >> > fQuit)
>> >> > >> > at eHome.UI.Dispatcher.MainLoopBody(Feeder feeder)
>> >> > >> > at eHome.UI.Dispatcher.MainLoop(LoopCondition condition,
>> >> > >> > LoopBody
>> >> > >> > body)
>> >> > >> > at eHome.UI.Dispatcher.MainLoop(LoopCondition loopCondition)
>> >> > >> > at eHome.UI.Application.Run()
>> >> > >> > at ServiceBus.UIFramework.PageBasedUCPService.Run()
>> >> > >> > at ServiceBus.UIFramework.UserControlPoint.Main(Strin g[]
>> >> > >> > args)
>>
>> >> > >> > __________ Information from ESET Smart Security, version of
>> >> > >> > virus
>> >> > >> > signature database 4614 (20091117) __________
>>
>> >> > >> > The message was checked by ESET Smart Security.
>>
>> >> > >> >http://www.eset.com
>>
>> >> > >> __________ Information from ESET Smart Security, version of virus
>> >> > >> signature database 4614 (20091117) __________
>>
>> >> > >> The message was checked by ESET Smart Security.
>>
>> >> > >>http://www.eset.com
>>
>> >> > > __________ Information from ESET Smart Security, version of virus
>> >> > > signature database 4614 (20091117) __________
>>
>> >> > > The message was checked by ESET Smart Security.
>>
>> >> > >http://www.eset.com
>>
>> >> > __________ Information from ESET Smart Security, version of virus
>> >> > signature database 4614 (20091117) __________
>>
>> >> > The message was checked by ESET Smart Security.
>>
>> >> >http://www.eset.com
>>
>> > __________ Information from ESET Smart Security, version of virus
>> > signature database 4615 (20091117) __________
>>
>> > The message was checked by ESET Smart Security.
>>
>> >http://www.eset.com
>>
>> __________ Information from ESET Smart Security, version of virus
>> signature database 4615 (20091117) __________
>>
>> The message was checked by ESET Smart Security.
>>
>> http://www.eset.com
>
>
> __________ Information from ESET Smart Security, version of virus
> signature database 4615 (20091117) __________
>
> The message was checked by ESET Smart Security.
>
> http://www.eset.com
>
>
>

__________ Information from ESET Smart Security, version of virus signature database 4615 (20091117) __________

The message was checked by ESET Smart Security.

http://www.eset.com