0x0000000A: IRQL_NOT_LESS_OR_EQUAL
Typically due to a bad driver, or faulty or incompatible hardware or software.
Technically, this error condition means that a kernel-mode process or driver tried
to access a memory location to which it did not have permission, or at a kernel
Interrupt ReQuest Level (IRQL) that was too high. (A kernel-mode process can access
only other processes that have an IRQL lower than, or equal to, its own.)
http://msdn.microsoft.com/en-gb/library/ms793589.aspx
General Troubleshooting of STOP Messages
If you can’t find a specific reference to your problem, running through the
following checklist stands a good chance of resolving the problem for you. This
checklist is also usually the best approach to troubleshooting some specific Stop
messagesExamine the “System” and “Application” logs in Event Viewer for other recent
errors that might give further clues. To do this, launch EventVwr.msc from a Run
box; or open “Administrative Tools” in the Control Panel then launch Event Viewer.
1.. If you’ve recently added new hardware, remove it and retest.
2.. Run hardware diagnostics supplied by the manufacturer.
3.. Make sure device drivers and system BIOS are up-to-date.
4.. However, if you’ve installed new drivers just before the problem appeared, try
rolling them back to the older ones.
5.. Open the box and make sure all hardware is correctly installed, well seated,
and solidly connected.
6.. Confirm that all of your hardware is on the If some of it isn’t, then pay
particular attention to the non-HCL hardware in your troubleshooting.
7.. Check for viruses.
8.. Investigate recently added software.
9.. Examine (and try disabling) BIOS memory options such as caching or shadowing.
NOTE: When a STOP message occurs, Windows can create a debug file for very detailed
analysis. To do this, it needs a workspace equal to the amount of physical RAM you
have installed. If you resize your Win XP pagefile minimum to less than the size of
your physical RAM, you will get an advisory message that your system may not be able
to create a debugging information file if a STOP error occurs. My advice is to go
ahead with this change if you want, but simply remember the limitation so that you
can change it back if you need to troubleshoot STOP messages. Some general
troubleshooting principles are suggested in the Resource Kit for approaching STOP
messages overall.
--
Peter
Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.
"naturalpaths" <> wrote in message
news:...
>
> I am hoping someone can tell me what's wrong with my new Dell Studio
> w/Vista. Thank you for any help!
>
> HERE'S THE MESSAGE I GOT:
>
>
> Problem Event Name: BlueScreen
> OS Version: 6.0.6001.2.1.0.768.3
> Locale ID: 1033
>
>
>
> Additional information about the problem:
> BCCode: a
> BCP1: 0000000000000880
> BCP2: 000000000000000C
> BCP3: 0000000000000001
> BCP4: FFFFF80001C7CA15
> OS Version: 6_0_6001
> Service Pack: 1_0
> Product: 768_1
>
>
> Files that help describe the problem:
> C:\Windows\Minidump\Mini061109-01.dmp
> C:\Users\Michelle\AppData\Local\Temp\WER448237-0.sysdata.xml
> C:\Users\Michelle\AppData\Local\Temp\WER498D.tmp.v ersion.txt
>
>
> --
> naturalpaths
> ------------------------------------------------------------------------
> naturalpaths's Profile: http://forums.techarena.in/members/105127.htm
> View this thread: http://forums.techarena.in/vista-help/1196064.htm
>
> http://forums.techarena.in
>
Similar Threads
Linear Mode
