Re: Problem installation IE 8 with WSUS on Windows XP SP2 clients

[Crosspost to WSUS newsgroup]

While WinXP SP3 is NOT a prerequisite, why isn't SP3 installed yet?
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Client - since 2002
www.banthecheck.com


KSC wrote:
> I try to install IE 8 through WSUS on Windows XP SP2 clients, but without
> success, is the error in the log file the cause? (ERROR: Couldn't read
> value: 'LIPPackage' from [Version] section in update.inf)
>
> 00:00.000:
> ================================================== ==================
>
> 00:00.125: Started: 2009/09/10 (Y/M/D) 14:52:38.075 (local)
>
> 00:00.140: Time Format in this log: MM:ss.mmm
> (minutes:seconds.milliseconds)
>
> 00:00.156: Command line: f:\8accc5038729beaaae0194\update\iesetup.exe
> /wu-silent
>
> 00:00.187: INFO: Checking version for
> f:\8accc5038729beaaae0194\update\iesetup.exe: 8.0.6001.18702
>
> 00:00.296: INFO: Acquired Package Installer Mutex
>
> 00:00.312: INFO: Operating System: Windows Workstation: 5.1.2600
> (Service
> Pack 2)
>
> 00:00.515: ERROR: Couldn't read value: 'LIPPackage' from [Version]
> section
> in update.inf
>
> 00:00.531: INFO: Checking Prerequisites
>
> 00:00.562: INFO: Checking version for C:\WINDOWS\system32\msctf.dll:
> 5.1.2600.2180
>
> 00:00.578: INFO: Prerequisites Satisfied: No
>
> 00:00.640: INFO: Checking version for C:\Program Files\Internet
> Explorer\iexplore.exe: 7.0.6000.16876
>
> 00:00.671: INFO: C:\Program Files\Internet Explorer\iexplore.exe
> version:
> 7.0.6000.16876
>
> 00:00.687: INFO: Checking if iexplore.exe's current version is between
> 8.0.6001.0...
>
> 00:00.718: INFO: ...and 8.1.0.0...
>
> 00:00.734: INFO: Maximum version on which to run IEAK branding is:
> 8.1.0.0...
>
> 00:00.750: INFO: iexplore.exe version check success. Install can
> proceed.
>
> 00:00.781: INFO: Checking version for C:\Program Files\Internet
> Explorer\iexplore.exe: 7.0.6000.16876
>
> 00:00.796: INFO: Checking version for C:\WINDOWS\system32\mshtml.dll:
> 7.0.6000.16890
>
> 00:00.828: INFO: Checking version for C:\WINDOWS\system32\wininet.dll:
> 7.0.6000.16876
>
> 00:00.906: INFO: EULA not shown in passive or quiet mode.
>
> 00:00.937: INFO: Skip directly to Options page.
>
> 00:01.000: INFO: |PreInstall >>> CPageProgress:lgProc: Exiting
> Phase PH_NONE
>
> 00:01.015: INFO: |PreInstall >>> CPageProgress::_ChangeState:
> Original Phase: 0
>
> 00:01.031: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 1
>
> 00:01.062: INFO: |Initialize >>>
>> [BEGIN]------------------------------
>
> 00:01.078: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 1
>
> 00:01.093: INFO: |Initialize >>> SKIP[FALSE]>>Looking for skip
> clauses
>
> 00:01.125: INFO: |Initialize >>> SKIP[FALSE]>>Result: RUNNING
> This
> Phase
>
> 00:01.140: INFO: |Initialize >>> Calculating bytes needed to
> install.
>
> 00:01.171: INFO: |Initialize >>> Diskspace Required: 151918308
>
> 00:01.187: INFO: |Initialize >>> Diskspace Available to user:
> 26173431808
>
> 00:01.265: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
> CoCreateInstance.CLSID_UpdateSession: HResult 0x00000000
>
> 00:01.296: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
> PutClientApplicationID: HResult 0x00000000
>
> 00:01.312: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
> CreateUpdateSearcher: HResult 0x00000000
>
> 00:01.343: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
> CreateUpdateDownloader: HResult 0x00000000
>
> 00:01.359: INFO: WindowsUpdate>>CWindowsUpdateMgr::Initialize:
> CreateUpdateInstaller: HResult 0x00000000
>
> 00:01.375: INFO: WindowsUpdate>>WindowsUpdateMgr::Initialize: State
> Change: SS_INITIALIZED.
>
> 00:01.406: INFO: |Initialize >>> CStateInitialize::OnInitialize:
> Windows Update Manager Initialization Result: 0x00000000
>
> 00:01.421: INFO: |Initialize >>> CInstallationState::_ExitState:
> Preparing to Leave State.
>
> 00:01.437: INFO: |Initialize >>> CInstallationState::_ExitState:
> Setting Progress 100.
>
> 00:01.468: INFO: |Initialize >>>
> CInstallationState::_SetProgress:
> Post Set Progress Message Succeeded.
>
> 00:01.484: INFO: |Initialize >>> CInstallationState::_ExitState:
> Posting Exit Phase Message.
>
> 00:01.500: INFO: |Initialize >>> CInstallationState::_ExitState:
> Post Exit Phase Message Succeeded.
>
> 00:01.531: INFO: |Initialize >>> CPageProgress:lgProc: Received
> WM_PR_SETPROGRESS, 64, 0
>
> 00:01.546: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 1
>
> 00:01.578: INFO: |Initialize >>> CPageProgress:lgProc: Received
> WM_PR_EXITPHASE, 0, 0
>
> 00:01.593: INFO: |Initialize >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 1
>
> 00:01.609: INFO: |Initialize >>>
> <[END]--------------------------------
>
> 00:01.625: INFO: |Initialize >>> CPageProgress::_ChangeState:
> Original Phase: 1
>
> 00:01.656: INFO: |Uninstall Prev. >>>
>> [BEGIN]------------------------------
>
> 00:01.671: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 2
>
> 00:01.687: INFO: |Uninstall Prev. >>> SKIP[FALSE]>>Looking for skip
> clauses
>
> 00:01.718: INFO: |Uninstall Prev. >>> SKIP[FALSE]>> Adding [FALSE]
> Condition: !_psdStateData->GetIsInitSuccessful()
>
> 00:01.734: INFO: |Uninstall Prev. >>> SKIP[FALSE]>> Adding [TRUE ]
> Condition: !g_pApp->GetState()->AreWeDoingUninstall()
>
> 00:01.750: INFO: |Uninstall Prev. >>> SKIP[TRUE ]>>Result: SKIPPING
> This
> Phase
>
> 00:01.781: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
> Preparing to Leave State.
>
> 00:01.796: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
> Setting Progress 100.
>
> 00:01.812: INFO: |Uninstall Prev. >>>
> CInstallationState::_SetProgress:
> Post Set Progress Message Succeeded.
>
> 00:01.843: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
> Posting Exit Phase Message.
>
> 00:01.859: INFO: |Uninstall Prev. >>> CInstallationState::_ExitState:
> Post Exit Phase Message Succeeded.
>
> 00:01.875: INFO: |Uninstall Prev. >>> CPageProgress:lgProc: Received
> WM_PR_SETPROGRESS, 64, 0
>
> 00:01.906: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 2
>
> 00:01.921: INFO: |Uninstall Prev. >>> CPageProgress:lgProc: Received
> WM_PR_EXITPHASE, 0, 0
>
> 00:01.937: INFO: |Uninstall Prev. >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 2
>
> 00:01.968: INFO: |Uninstall Prev. >>>
> <[END]--------------------------------
>
> 00:01.984: INFO: |Uninstall Prev. >>> CPageProgress::_ChangeState:
> Original Phase: 2
>
> 00:02.000: INFO: |WU Download >>>
>> [BEGIN]------------------------------
>
> 00:06.609: INFO: |Inst. Post-Upd. >>>
>> [BEGIN]------------------------------
>
> 00:06.625: INFO: |Inst. Post-Upd. >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 10
>
> 00:06.656: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>>Looking for skip
> clauses
>
> 00:06.671: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>> Adding [FALSE]
> Condition: !_psdStateData->GetIsInitSuccessful()
>
> 00:06.687: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>> Adding [FALSE]
> Condition: !g_pApp->GetState()->GetOptShouldUpdate()
>
> 00:06.718: INFO: |Inst. Post-Upd. >>> SKIP[FALSE]>> Adding [TRUE ]
> Condition: !g_pApp->GetState()->GetResultCouldInstallIE()
>
> 00:06.734: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [TRUE ]
> Condition:
> g_pApp->GetState()->GetResultPostIEUpdateState()!=WU_COULD_DOWNLOAD
>
> 00:06.750: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [FALSE]
> Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_BRANDING
>
> 00:06.781: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [FALSE]
> Condition: g_pApp->GetState()->AreWeDoingUninstall()
>
> 00:06.796: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>> Adding [TRUE ]
> Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()
>
> 00:06.812: INFO: |Inst. Post-Upd. >>> SKIP[TRUE ]>>Result: SKIPPING
> This
> Phase
>
> 00:06.843: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
> Preparing to Leave State.
>
> 00:06.859: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
> Setting Progress 100.
>
> 00:06.875: INFO: |Inst. Post-Upd. >>>
> CInstallationState::_SetProgress:
> Post Set Progress Message Succeeded.
>
> 00:06.906: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
> Posting Exit Phase Message.
>
> 00:06.921: INFO: |Inst. Post-Upd. >>> CInstallationState::_ExitState:
> Post Exit Phase Message Succeeded.
>
> 00:06.937: INFO: |Inst. Post-Upd. >>> CPageProgress:lgProc: Received
> WM_PR_SETPROGRESS, 64, 0
>
> 00:06.968: INFO: |Inst. Post-Upd. >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 10
>
> 00:06.984: INFO: |Inst. Post-Upd. >>> CPageProgress:lgProc: Received
> WM_PR_EXITPHASE, 0, 0
>
> 00:07.000: INFO: Setting Windows Update Registry Keys:
> LookingForUpdates=0x00 - ForcePostUpdateDownload=0x00 -
> ForcePostUpdateInstall=0x00
>
> 00:07.031: INFO: |Inst. Post-Upd. >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 10
>
> 00:07.046: INFO: |Inst. Post-Upd. >>>
> <[END]--------------------------------
>
> 00:07.062: INFO: |Inst. Post-Upd. >>> CPageProgress::_ChangeState:
> Original Phase: 10
>
> 00:07.093: INFO: |IEAK After IEUPD >>>
>> [BEGIN]------------------------------
>
> 00:07.109: INFO: |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 11
>
> 00:07.125: INFO: |IEAK After IEUPD >>> SKIP[FALSE]>>Looking for skip
> clauses
>
> 00:07.156: INFO: |IEAK After IEUPD >>> SKIP[FALSE]>> Adding [FALSE]
> Condition: !_psdStateData->GetIsInitSuccessful()
>
> 00:07.171: INFO: |IEAK After IEUPD >>> SKIP[FALSE]>> Adding [TRUE ]
> Condition: g_pApp->GetState()->GetOptIEAKMode()!=IEAK_PACKAGE
>
> 00:07.187: INFO: |IEAK After IEUPD >>> SKIP[TRUE ]>> Adding [FALSE]
> Condition: g_pApp->GetState()->AreWeDoingUninstall()
>
> 00:07.218: INFO: |IEAK After IEUPD >>> SKIP[TRUE ]>> Adding [TRUE ]
> Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()
>
> 00:07.312: INFO: |IEAK After IEUPD >>> SKIP[TRUE ]>>Result: SKIPPING
> This
> Phase
>
> 00:07.328: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
> Preparing to Leave State.
>
> 00:07.359: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
> Setting Progress 100.
>
> 00:07.375: INFO: |IEAK After IEUPD >>>
> CInstallationState::_SetProgress:
> Post Set Progress Message Succeeded.
>
> 00:07.406: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
> Posting Exit Phase Message.
>
> 00:07.421: INFO: |IEAK After IEUPD >>> CInstallationState::_ExitState:
> Post Exit Phase Message Succeeded.
>
> 00:07.437: INFO: |IEAK After IEUPD >>> CPageProgress:lgProc: Received
> WM_PR_SETPROGRESS, 64, 0
>
> 00:07.453: INFO: |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 11
>
> 00:07.484: INFO: |IEAK After IEUPD >>> CPageProgress:lgProc: Received
> WM_PR_EXITPHASE, 0, 0
>
> 00:07.500: INFO: |IEAK After IEUPD >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 11
>
> 00:07.531: INFO: |IEAK After IEUPD >>>
> <[END]--------------------------------
>
> 00:07.562: INFO: |IEAK After IEUPD >>> CPageProgress::_ChangeState:
> Original Phase: 11
>
> 00:07.609: INFO: |IEAK Finalize >>>
>> [BEGIN]------------------------------
>
> 00:07.625: INFO: |IEAK Finalize >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 12
>
> 00:07.640: INFO: |IEAK Finalize >>> SKIP[FALSE]>>Looking for skip
> clauses
>
> 00:07.671: INFO: |IEAK Finalize >>> SKIP[FALSE]>> Adding [FALSE]
> Condition: !_psdStateData->GetIsInitSuccessful()
>
> 00:07.687: INFO: |IEAK Finalize >>> SKIP[FALSE]>> Adding [TRUE ]
> Condition: g_pApp->GetState()->GetOptIEAKMode()==IEAK_NONE
>
> 00:07.703: INFO: |IEAK Finalize >>> SKIP[TRUE ]>> Adding [FALSE]
> Condition: g_pApp->GetState()->AreWeDoingUninstall()
>
> 00:07.734: INFO: |IEAK Finalize >>> SKIP[TRUE ]>> Adding [TRUE ]
> Condition: !g_pApp->GetState()->GetPrerequisiteSatisfied()
>
> 00:07.750: INFO: |IEAK Finalize >>> SKIP[TRUE ]>>Result: SKIPPING
> This
> Phase
>
> 00:07.765: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
> Preparing to Leave State.
>
> 00:07.796: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
> Setting Progress 100.
>
> 00:07.812: INFO: |IEAK Finalize >>>
> CInstallationState::_SetProgress:
> Post Set Progress Message Succeeded.
>
> 00:07.828: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
> Posting Exit Phase Message.
>
> 00:07.859: INFO: |IEAK Finalize >>> CInstallationState::_ExitState:
> Post Exit Phase Message Succeeded.
>
> 00:07.875: INFO: |IEAK Finalize >>> CPageProgress:lgProc: Received
> WM_PR_SETPROGRESS, 64, 0
>
> 00:07.890: INFO: |IEAK Finalize >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 12
>
> 00:07.921: INFO: |IEAK Finalize >>> CPageProgress:lgProc: Received
> WM_PR_EXITPHASE, 0, 0
>
> 00:07.937: INFO: |IEAK Finalize >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 12
>
> 00:07.953: INFO: |IEAK Finalize >>>
> <[END]--------------------------------
>
> 00:07.984: INFO: |IEAK Finalize >>> CPageProgress::_ChangeState:
> Original Phase: 12
>
> 00:08.000: INFO: |Finalize >>>
>> [BEGIN]------------------------------
>
> 00:08.015: INFO: |Finalize >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 13
>
> 00:08.046: INFO: |Finalize >>> SKIP[FALSE]>>Looking for skip
> clauses
>
> 00:08.062: INFO: |Finalize >>> SKIP[FALSE]>>Result: RUNNING
> This
> Phase
>
> 00:08.078: INFO: |Finalize >>> CInstallationState::_ExitState:
> Preparing to Leave State.
>
> 00:08.109: INFO: |Finalize >>> CInstallationState::_ExitState:
> Setting Progress 100.
>
> 00:08.125: INFO: |Finalize >>>
> CInstallationState::_SetProgress:
> Post Set Progress Message Succeeded.
>
> 00:08.140: INFO: |Finalize >>> CInstallationState::_ExitState:
> Posting Exit Phase Message.
>
> 00:08.171: INFO: |Finalize >>> CInstallationState::_ExitState:
> Post Exit Phase Message Succeeded.
>
> 00:08.187: INFO: |Finalize >>> CPageProgress:lgProc: Received
> WM_PR_SETPROGRESS, 64, 0
>
> 00:08.203: INFO: |Finalize >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 13
>
> 00:08.296: INFO: |Finalize >>> CPageProgress:lgProc: Received
> WM_PR_EXITPHASE, 0, 0
>
> 00:08.328: INFO: |Finalize >>> CPageProgress::_UpdateDisplay:
> Actual Phase: 13
>
> 00:08.343: INFO: |Finalize >>>
> <[END]--------------------------------
>
> 00:08.359: INFO: |Finalize >>> CPageProgress::_ChangeState:
> Original Phase: 13
>
> 00:11.046: INFO: REBOOT: not needed.
>
> 00:11.062: INFO: REBOOT: not needed.
>
> 00:11.093: INFO: Installer return value: hr=0x00000000
>
> 00:11.125: INFO: Setup exit code: 0x00000000.