Re: Windows Defender Defenition 1.35.716.0 failed to install.

Belay that. v1.35.744.0 finally installed via Defender's internet updater.

PA Bear [MS MVP] wrote:
> Check your definitions version in Defender.
>
> John Navas wrote:
>> On Wed, 25 Jun 2008 00:51:27 -0400, "PA Bear [MS MVP]"
>> <> wrote in <>:
>>
>>> As John pointed out a few minutes ago, you can manually update Defender
>>> on
>>> 32-bit machines:
>>>
>>> 1. Go to http://www.microsoft.com/security/portal/ADL.aspx
>>>
>>> 2. Click on the link on the left side of the page to download/install
>>> the
>>> new update. Do not use the link in the right-hand menu under "Latest
>>> Definition Updates".
>>>
>>> The linked download appears to be a re-release of definitions
>>> v1.35.563.0
>>> which were originally released on 19 Jun-08. Installing it will make
>>> Defender "happy" again. <wink>
>>
>> As of this writing, the Definition version on
>> <http://www.microsoft.com/security/portal/ADL.aspx> varies between
>> 1.35.724.0 (doesn't work) and 1.35.744.0 (does work), probably because
>> all load balancing servers haven't yet been updated to the later
>> corrected version, so be sure to check the version before downloading.

Not offered here through Windows Update.

Last update 1.35.563.0 19 June 2008. Updating using Windows Defender
says none available.


~~~~


Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

PA Bear [MS MVP] wrote:
> Belay that. v1.35.744.0 finally installed via Defender's internet
> updater.
> PA Bear [MS MVP] wrote:
>> Check your definitions version in Defender.
>>
>> John Navas wrote:
>>> On Wed, 25 Jun 2008 00:51:27 -0400, "PA Bear [MS MVP]"
>>> <> wrote in
>>> <>:
>>>> As John pointed out a few minutes ago, you can manually update
>>>> Defender on
>>>> 32-bit machines:
>>>>
>>>> 1. Go to http://www.microsoft.com/security/portal/ADL.aspx
>>>>
>>>> 2. Click on the link on the left side of the page to
>>>> download/install the
>>>> new update. Do not use the link in the right-hand menu under
>>>> "Latest Definition Updates".
>>>>
>>>> The linked download appears to be a re-release of definitions
>>>> v1.35.563.0
>>>> which were originally released on 19 Jun-08. Installing it will
>>>> make Defender "happy" again. <wink>
>>>
>>> As of this writing, the Definition version on
>>> <http://www.microsoft.com/security/portal/ADL.aspx> varies between
>>> 1.35.724.0 (doesn't work) and 1.35.744.0 (does work), probably
>>> because all load balancing servers haven't yet been updated to the
>>> later corrected version, so be sure to check the version before
>>> downloading.

Same here still at the 1.35.563. 19 June 2008 this morning and none
available through the programs check for updates.

--
Joan Archer
http://www.freewebs.com/crossstitcher
http://lachsoft.com/photogallery

"Gerry" <> wrote in message
news:...
> Not offered here through Windows Update.
>
> Last update 1.35.563.0 19 June 2008. Updating using Windows Defender says
> none available.
>
>
> ~~~~
>
>
> Gerry
> ~~~~
> FCA
> Stourport, England
> Enquire, plan and execute
> ~~~~~~~~~~~~~~~~~~~
>
> PA Bear [MS MVP] wrote:
>> Belay that. v1.35.744.0 finally installed via Defender's internet
>> updater.
>> PA Bear [MS MVP] wrote:
>>> Check your definitions version in Defender.
>>>
>>> John Navas wrote:
>>>> On Wed, 25 Jun 2008 00:51:27 -0400, "PA Bear [MS MVP]"
>>>> <> wrote in
>>>> <>:
>>>>> As John pointed out a few minutes ago, you can manually update
>>>>> Defender on
>>>>> 32-bit machines:
>>>>>
>>>>> 1. Go to http://www.microsoft.com/security/portal/ADL.aspx
>>>>>
>>>>> 2. Click on the link on the left side of the page to
>>>>> download/install the
>>>>> new update. Do not use the link in the right-hand menu under
>>>>> "Latest Definition Updates".
>>>>>
>>>>> The linked download appears to be a re-release of definitions
>>>>> v1.35.563.0
>>>>> which were originally released on 19 Jun-08. Installing it will
>>>>> make Defender "happy" again. <wink>
>>>>
>>>> As of this writing, the Definition version on
>>>> <http://www.microsoft.com/security/portal/ADL.aspx> varies between
>>>> 1.35.724.0 (doesn't work) and 1.35.744.0 (does work), probably
>>>> because all load balancing servers haven't yet been updated to the
>>>> later corrected version, so be sure to check the version before
>>>> downloading.
>
>

Manual Definition update at Microsoft Malware Protection Center
<http://www.microsoft.com/security/portal/ADL.aspx> is now up to version
1.35.745.0, which isn't yet on Windows Update or Windows Defender
Update. This seems to be the place to go for the most current update.


On Wed, 25 Jun 2008 12:47:10 +0100, "Joan Archer"
<> wrote in
<#pW#>:

>Same here still at the 1.35.563. 19 June 2008 this morning and none
>available through the programs check for updates.

>"Gerry" <> wrote in message
>news:...
>> Not offered here through Windows Update.
>>
>> Last update 1.35.563.0 19 June 2008. Updating using Windows Defender says
>> none available.

>> PA Bear [MS MVP] wrote:
>>> Belay that. v1.35.744.0 finally installed via Defender's internet
>>> updater.
>>> PA Bear [MS MVP] wrote:
>>>> Check your definitions version in Defender.
>>>>
>>>> John Navas wrote:
>>>>> On Wed, 25 Jun 2008 00:51:27 -0400, "PA Bear [MS MVP]"
>>>>> <> wrote in
>>>>> <>:
>>>>>> As John pointed out a few minutes ago, you can manually update
>>>>>> Defender on
>>>>>> 32-bit machines:
>>>>>>
>>>>>> 1. Go to http://www.microsoft.com/security/portal/ADL.aspx
>>>>>>
>>>>>> 2. Click on the link on the left side of the page to
>>>>>> download/install the
>>>>>> new update. Do not use the link in the right-hand menu under
>>>>>> "Latest Definition Updates".
>>>>>>
>>>>>> The linked download appears to be a re-release of definitions
>>>>>> v1.35.563.0
>>>>>> which were originally released on 19 Jun-08. Installing it will
>>>>>> make Defender "happy" again. <wink>
>>>>>
>>>>> As of this writing, the Definition version on
>>>>> <http://www.microsoft.com/security/portal/ADL.aspx> varies between
>>>>> 1.35.724.0 (doesn't work) and 1.35.744.0 (does work), probably
>>>>> because all load balancing servers haven't yet been updated to the
>>>>> later corrected version, so be sure to check the version before
>>>>> downloading.

--
Best regards,
John Navas <http:/navasgroup.com>

Thanks I have it now after getting the same info from the privatenews group,
all installed OK <g>

--
Joan Archer
http://www.freewebs.com/crossstitcher
http://lachsoft.com/photogallery

"John Navas" <> wrote in message
news:...
> Manual Definition update at Microsoft Malware Protection Center
> <http://www.microsoft.com/security/portal/ADL.aspx> is now up to version
> 1.35.745.0, which isn't yet on Windows Update or Windows Defender
> Update. This seems to be the place to go for the most current update.
>
>
> On Wed, 25 Jun 2008 12:47:10 +0100, "Joan Archer"
> <> wrote in
> <#pW#>:
>
>>Same here still at the 1.35.563. 19 June 2008 this morning and none
>>available through the programs check for updates.
>
>>"Gerry" <> wrote in message
>>news:...
>>> Not offered here through Windows Update.
>>>
>>> Last update 1.35.563.0 19 June 2008. Updating using Windows Defender
>>> says
>>> none available.
>
>>> PA Bear [MS MVP] wrote:
>>>> Belay that. v1.35.744.0 finally installed via Defender's internet
>>>> updater.
>>>> PA Bear [MS MVP] wrote:
>>>>> Check your definitions version in Defender.
>>>>>
>>>>> John Navas wrote:
>>>>>> On Wed, 25 Jun 2008 00:51:27 -0400, "PA Bear [MS MVP]"
>>>>>> <> wrote in
>>>>>> <>:
>>>>>>> As John pointed out a few minutes ago, you can manually update
>>>>>>> Defender on
>>>>>>> 32-bit machines:
>>>>>>>
>>>>>>> 1. Go to http://www.microsoft.com/security/portal/ADL.aspx
>>>>>>>
>>>>>>> 2. Click on the link on the left side of the page to
>>>>>>> download/install the
>>>>>>> new update. Do not use the link in the right-hand menu under
>>>>>>> "Latest Definition Updates".
>>>>>>>
>>>>>>> The linked download appears to be a re-release of definitions
>>>>>>> v1.35.563.0
>>>>>>> which were originally released on 19 Jun-08. Installing it will
>>>>>>> make Defender "happy" again. <wink>
>>>>>>
>>>>>> As of this writing, the Definition version on
>>>>>> <http://www.microsoft.com/security/portal/ADL.aspx> varies between
>>>>>> 1.35.724.0 (doesn't work) and 1.35.744.0 (does work), probably
>>>>>> because all load balancing servers haven't yet been updated to the
>>>>>> later corrected version, so be sure to check the version before
>>>>>> downloading.
>
> --
> Best regards,
> John Navas <http:/navasgroup.com>

v1.35.754.0 was available via the Security Portal a few hour ago, Joan.

Joan Archer wrote:
> Thanks I have it now after getting the same info from the privatenews
> group,
> all installed OK <g>
>
>
> "John Navas" <> wrote in message
> news:...
>> Manual Definition update at Microsoft Malware Protection Center
>> <http://www.microsoft.com/security/portal/ADL.aspx> is now up to version
>> 1.35.745.0, which isn't yet on Windows Update or Windows Defender
>> Update. This seems to be the place to go for the most current update.
>>
>>
>> On Wed, 25 Jun 2008 12:47:10 +0100, "Joan Archer"
>> <> wrote in
>> <#pW#>:
>>
>>> Same here still at the 1.35.563. 19 June 2008 this morning and none
>>> available through the programs check for updates.
>>
>>> "Gerry" <> wrote in message
>>> news:...
>>>> Not offered here through Windows Update.
>>>>
>>>> Last update 1.35.563.0 19 June 2008. Updating using Windows Defender
>>>> says
>>>> none available.
>>
>>>> PA Bear [MS MVP] wrote:
>>>>> Belay that. v1.35.744.0 finally installed via Defender's internet
>>>>> updater.
>>>>> PA Bear [MS MVP] wrote:
>>>>>> Check your definitions version in Defender.
>>>>>>
>>>>>> John Navas wrote:
>>>>>>> On Wed, 25 Jun 2008 00:51:27 -0400, "PA Bear [MS MVP]"
>>>>>>> <> wrote in
>>>>>>> <>:
>>>>>>>> As John pointed out a few minutes ago, you can manually update
>>>>>>>> Defender on
>>>>>>>> 32-bit machines:
>>>>>>>>
>>>>>>>> 1. Go to http://www.microsoft.com/security/portal/ADL.aspx
>>>>>>>>
>>>>>>>> 2. Click on the link on the left side of the page to
>>>>>>>> download/install the
>>>>>>>> new update. Do not use the link in the right-hand menu under
>>>>>>>> "Latest Definition Updates".
>>>>>>>>
>>>>>>>> The linked download appears to be a re-release of definitions
>>>>>>>> v1.35.563.0
>>>>>>>> which were originally released on 19 Jun-08. Installing it will
>>>>>>>> make Defender "happy" again. <wink>
>>>>>>>
>>>>>>> As of this writing, the Definition version on
>>>>>>> <http://www.microsoft.com/security/portal/ADL.aspx> varies between
>>>>>>> 1.35.724.0 (doesn't work) and 1.35.744.0 (does work), probably
>>>>>>> because all load balancing servers haven't yet been updated to the
>>>>>>> later corrected version, so be sure to check the version before
>>>>>>> downloading.
>>
>> --
>> Best regards,
>> John Navas <http:/navasgroup.com>

John

I tried the suggestion last night and thought I was getting the later
update. When I checked after installation the last definition update
installed was still that of 19 June. I just tried Windows Update and on
the second attempt was offered and sucessfully installed Definitions
Update 1.37.1.0 dated 25 June 2008.


~~~~


Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~



John Navas wrote:
> Manual Definition update at Microsoft Malware Protection Center
> <http://www.microsoft.com/security/portal/ADL.aspx> is now up to
> version
> 1.35.745.0, which isn't yet on Windows Update or Windows Defender
> Update. This seems to be the place to go for the most current update.
>
>
> On Wed, 25 Jun 2008 12:47:10 +0100, "Joan Archer"
> <> wrote in
> <#pW#>:
>
>> Same here still at the 1.35.563. 19 June 2008 this morning and none
>> available through the programs check for updates.
>
>> "Gerry" <> wrote in message
>> news:...
>>> Not offered here through Windows Update.
>>>
>>> Last update 1.35.563.0 19 June 2008. Updating using Windows
>>> Defender says none available.
>
>>> PA Bear [MS MVP] wrote:
>>>> Belay that. v1.35.744.0 finally installed via Defender's internet
>>>> updater.
>>>> PA Bear [MS MVP] wrote:
>>>>> Check your definitions version in Defender.
>>>>>
>>>>> John Navas wrote:
>>>>>> On Wed, 25 Jun 2008 00:51:27 -0400, "PA Bear [MS MVP]"
>>>>>> <> wrote in
>>>>>> <>:
>>>>>>> As John pointed out a few minutes ago, you can manually update
>>>>>>> Defender on
>>>>>>> 32-bit machines:
>>>>>>>
>>>>>>> 1. Go to http://www.microsoft.com/security/portal/ADL.aspx
>>>>>>>
>>>>>>> 2. Click on the link on the left side of the page to
>>>>>>> download/install the
>>>>>>> new update. Do not use the link in the right-hand menu under
>>>>>>> "Latest Definition Updates".
>>>>>>>
>>>>>>> The linked download appears to be a re-release of definitions
>>>>>>> v1.35.563.0
>>>>>>> which were originally released on 19 Jun-08. Installing it will
>>>>>>> make Defender "happy" again. <wink>
>>>>>>
>>>>>> As of this writing, the Definition version on
>>>>>> <http://www.microsoft.com/security/portal/ADL.aspx> varies
>>>>>> between
>>>>>> 1.35.724.0 (doesn't work) and 1.35.744.0 (does work), probably
>>>>>> because all load balancing servers haven't yet been updated to
>>>>>> the later corrected version, so be sure to check the version
>>>>>> before downloading.

Thanks Robear, got the new version come through this morning 1.37.1.0 <g>
Joan

--
Joan Archer
http://www.freewebs.com/crossstitcher
http://lachsoft.com/photogallery

"PA Bear [MS MVP]" <> wrote in message
news:#...
> v1.35.754.0 was available via the Security Portal a few hour ago, Joan.
>
> Joan Archer wrote:
>> Thanks I have it now after getting the same info from the privatenews
>> group,
>> all installed OK <g>
>>