Windows Vista Tips

Windows Vista Tips > Newsgroups > Windows Vista General Discussion > "Restart" vs. "Shut down"

Reply
Thread Tools Display Modes

"Restart" vs. "Shut down"

 
 
Ken Isaacson
Guest
Posts: n/a

 
      12-15-2008
Vista Ultimate, SP1

What's the real difference between "restart" and "shut down" followed by
turning back on? I know (I think) that some updates don't install unless you
choose "shut down." Is that the only difference?

Thanks.

Ken Isaacson
SILENT COUNSEL, a legal thriller
www.KenIsaacson.com

 
Reply With Quote
 
 
 
 
Jonathan Mars
Guest
Posts: n/a

 
      12-15-2008
"Ken Isaacson" <KJIsaacson[nospam]@gmail.com> wrote in message
news:06CD756B-0AE9-4E04-812F-...
> Vista Ultimate, SP1
>
> What's the real difference between "restart" and "shut down" followed by
> turning back on? I know (I think) that some updates don't install unless
> you choose "shut down." Is that the only difference?
>
> Thanks.
>
> Ken Isaacson
> SILENT COUNSEL, a legal thriller
> www.KenIsaacson.com
>


All updates install with restart and no need to use shutdown. Restart is a
soft boot and shutdown actually turns of power to all your hardware except a
small amount if you have the bios setup to allow you to power on with
keyboard.

 
Reply With Quote
 
D Lirious
Guest
Posts: n/a

 
      12-15-2008
If you click "shut down" you have to physically press the restart button on
your computer.
For software related issues there is no difference.
If your computer has locked up because of a hardware problem, most often due
to failing hard drive/RAM/power supply, you may have to turn it off and wait
a few seconds to see if you can reboot.

 
Reply With Quote
 
Richard Urban
Guest
Posts: n/a

 
      12-15-2008
A total shutdown every once in a while is a good thing!

Especially try it if you have a strange problem that you can not get a
handle on. I have seen a total shutdown cure some real strange ones - from
misbehaving keyboards to an erratic mouse condition.

Same goes for a printer. When it acts up turn it off and unplug it for a
couple of minutes. The printer may just straighten itself out by doing so.

--

Richard Urban
Microsoft MVP
Windows Desktop Experience


"Ken Isaacson" <KJIsaacson[nospam]@gmail.com> wrote in message
news:06CD756B-0AE9-4E04-812F-...
> Vista Ultimate, SP1
>
> What's the real difference between "restart" and "shut down" followed by
> turning back on? I know (I think) that some updates don't install unless
> you choose "shut down." Is that the only difference?
>
> Thanks.
>
> Ken Isaacson
> SILENT COUNSEL, a legal thriller
> www.KenIsaacson.com
>


 
Reply With Quote
 
Mark L. Ferguson
Guest
Posts: n/a

 
      12-15-2008
A 'cold boot' varies from a 'warm boot' in that power to the memory chips is
lost on the cold boot. Calling the 'unmaskable interrupt', Int zero, puts
the pointer on the input data bus to the first byte of memory, and it reads
the 'bootstrap' of the BIOS chip. If devices and memory are warm, the boot
is faster, but it does not insure that memory is flushed, and there is a
small risk of 'data out of bounds' errors. Vista is even more guilty of not
flushing memory than previous systems, since nothing is ever intentionally
'blanked'. On the other hand, never turning off the processor is considered
good for the chip, much like an incandescent light bulb.

--
Use the "Ratings" feature. It helps the new users.
Please use the Communities guidelines when posting.
http://www.microsoft.com/wn3/locales...help_en-us.htm
Mark L. Ferguson MS-MVP
https://mvp.support.microsoft.com/profile/Mark.Ferguson

"Ken Isaacson" <KJIsaacson[nospam]@gmail.com> wrote in message
news:06CD756B-0AE9-4E04-812F-...
> Vista Ultimate, SP1
>
> What's the real difference between "restart" and "shut down" followed by
> turning back on? I know (I think) that some updates don't install unless
> you choose "shut down." Is that the only difference?
>
> Thanks.
>
> Ken Isaacson
> SILENT COUNSEL, a legal thriller
> www.KenIsaacson.com
>

 
Reply With Quote
 
Tyro
Guest
Posts: n/a

 
      12-31-2008
Shut down powers off the computer. When power is restored, the computer
resets itself and runs a POST (Power On Self Test) to check things out.
These things are not done on Restart.

Tyro.

"Ken Isaacson" <KJIsaacson[nospam]@gmail.com> wrote in message
news:06CD756B-0AE9-4E04-812F-...
> Vista Ultimate, SP1
>
> What's the real difference between "restart" and "shut down" followed by
> turning back on? I know (I think) that some updates don't install unless
> you choose "shut down." Is that the only difference?
>
> Thanks.
>
> Ken Isaacson
> SILENT COUNSEL, a legal thriller
> www.KenIsaacson.com
>

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unwanted Multiple contacts in "To","CC","BCC" of email send catago xsailer Windows Vista Mail 2 10-12-2008 11:18 PM
Vista not wotking with "My Computer" or "Control Panel", "Screen Saver" Platebanger Windows Vista General Discussion 6 02-05-2008 01:54 PM
How can I add the icons "Delete", "Cut", "Copy" and "Paste" in Vis Moonwalker Windows Vista File Management 5 09-17-2007 10:53 PM
Windows Explorer: How to force ALL folders to use "All Items" template rather than "Pictures & Videos" Tom Windows Vista General Discussion 11 05-01-2007 03:44 AM
WM5 Sync with Vista "Windows Calender", "Contacts", and "Mail" Tony Windows Vista General Discussion 1 02-16-2007 11:20 PM



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59