Rollup 2 for Media Center 2005.

I've updated everything, now I want to download the above mentioned update.
It downloads fine, but fails on installation. The error code is 0x64 What
is the problem? I have genuine Media Center. I've validated everything. I
am so frustrated.

So what should I do?

Claudeth

See if anything here helps to resolve the issue :
http://blogs.msdn.com/astebner/articles/487537.aspx

Specifically, the Detailed information about Update Rollup 2 setup
heading and the List of log files produced by Update Rollup 2 setup link.

MowGreen [MVP 2003-2007]
===============
*-343-* FDNY
Never Forgotten
===============


claudegiz wrote:

> I've updated everything, now I want to download the above mentioned update.
> It downloads fine, but fails on installation. The error code is 0x64 What
> is the problem? I have genuine Media Center. I've validated everything. I
> am so frustrated.
>
> So what should I do?
>
> Claudeth

Nothing worked, I removed hotfix 91593, 95961 and 99337. All interconnect.
And it still fails. I just built my system, and haven't started to use the
dvr function, so this is not so critical. However, I figure by Thanksgiving,
after making sure that all the bugs are out, I'll start to utilize this
function. I still was hoping that I could have everything loaded that needed
to be loaded.

So still can't download and install Rollup2 for Media Center 2005. Bummer!

"MowGreen [MVP]" wrote:

> See if anything here helps to resolve the issue :
> http://blogs.msdn.com/astebner/articles/487537.aspx
>
> Specifically, the Detailed information about Update Rollup 2 setup
> heading and the List of log files produced by Update Rollup 2 setup link.
>
> MowGreen [MVP 2003-2007]
> ===============
> *-343-* FDNY
> Never Forgotten
> ===============
>
>
> claudegiz wrote:
>
> > I've updated everything, now I want to download the above mentioned update.
> > It downloads fine, but fails on installation. The error code is 0x64 What
> > is the problem? I have genuine Media Center. I've validated everything. I
> > am so frustrated.
> >
> > So what should I do?
> >
> > Claudeth
>

Did you check the log files for error messages as described on Aaron's
site ?
>>>Specifically, the Detailed information about Update Rollup 2 setup
>>>heading and the List of log files produced by Update Rollup 2 setup link.

MowGreen [MVP 2003-2007]
===============
*-343-* FDNY
Never Forgotten
===============


claudegiz wrote:

> Nothing worked, I removed hotfix 91593, 95961 and 99337. All interconnect.
> And it still fails. I just built my system, and haven't started to use the
> dvr function, so this is not so critical. However, I figure by Thanksgiving,
> after making sure that all the bugs are out, I'll start to utilize this
> function. I still was hoping that I could have everything loaded that needed
> to be loaded.
>
> So still can't download and install Rollup2 for Media Center 2005. Bummer!
>
> "MowGreen [MVP]" wrote:
>
>
>>See if anything here helps to resolve the issue :
>>http://blogs.msdn.com/astebner/articles/487537.aspx
>>
>>Specifically, the Detailed information about Update Rollup 2 setup
>>heading and the List of log files produced by Update Rollup 2 setup link.
>>
>>MowGreen [MVP 2003-2007]
>>===============
>> *-343-* FDNY
>>Never Forgotten
>>===============
>>
>>
>>claudegiz wrote:
>>
>>
>>>I've updated everything, now I want to download the above mentioned update.
>>>It downloads fine, but fails on installation. The error code is 0x64 What
>>>is the problem? I have genuine Media Center. I've validated everything. I
>>>am so frustrated.
>>>
>>>So what should I do?
>>>
>>>Claudeth
>>

Yes, which is how I knew to remove the updates listed. It seems that I need
to remove all the updates, then install rollup, then re-install the updates.
I really don't want to do this. Since I'm not the only one having this
problem, I'm going to wait until MS supplies a fix. Also, I'm not using
Xbox. My media center hook-up be through Dishnetwork set-top box. The
rollup, I beleive doesn't affect this.

"MowGreen [MVP]" wrote:

> Did you check the log files for error messages as described on Aaron's
> site ?
> >>>Specifically, the Detailed information about Update Rollup 2 setup
> >>>heading and the List of log files produced by Update Rollup 2 setup link.
>
> MowGreen [MVP 2003-2007]
> ===============
> *-343-* FDNY
> Never Forgotten
> ===============
>
>
> claudegiz wrote:
>
> > Nothing worked, I removed hotfix 91593, 95961 and 99337. All interconnect.
> > And it still fails. I just built my system, and haven't started to use the
> > dvr function, so this is not so critical. However, I figure by Thanksgiving,
> > after making sure that all the bugs are out, I'll start to utilize this
> > function. I still was hoping that I could have everything loaded that needed
> > to be loaded.
> >
> > So still can't download and install Rollup2 for Media Center 2005. Bummer!
> >
> > "MowGreen [MVP]" wrote:
> >
> >
> >>See if anything here helps to resolve the issue :
> >>http://blogs.msdn.com/astebner/articles/487537.aspx
> >>
> >>Specifically, the Detailed information about Update Rollup 2 setup
> >>heading and the List of log files produced by Update Rollup 2 setup link.
> >>
> >>MowGreen [MVP 2003-2007]
> >>===============
> >> *-343-* FDNY
> >>Never Forgotten
> >>===============
> >>
> >>
> >>claudegiz wrote:
> >>
> >>
> >>>I've updated everything, now I want to download the above mentioned update.
> >>>It downloads fine, but fails on installation. The error code is 0x64 What
> >>>is the problem? I have genuine Media Center. I've validated everything. I
> >>>am so frustrated.
> >>>
> >>>So what should I do?
> >>>
> >>>Claudeth
> >>
>