Windows Vista Tips

Windows Vista Tips > Newsgroups > Windows Vista Installation > Sata Raid prevents install

Reply
Thread Tools Display Modes

Sata Raid prevents install

 
 
voigtstr
Guest
Posts: n/a

 
      06-11-2006
hardware
asus a8n sli deluxe
2x74gig WD raptors (sata) in raid 0
1x 120gig Maxtor (pata)
2gig ram
2 x geforce6600 gt

When installing vista says it cant find the drive information. Hitting ok
goes back to install vista and the cycle repeats. I'm not prompted to install
the f6 drivers.

If I unplug the sata drives, I can install vista fine to the maxtor drive
but I'm not prompted for the sata raid drivers.. if I try to install raid
after vista is installed, windows recognises the separate raptors, but doesnt
see them as raid 0

Anyone else getting the same? anyone got a work around?
 
Reply With Quote
 
 
 
 
voigtstr
Guest
Posts: n/a

 
      06-11-2006
Vista cant get the drive information if I have the sata disks plugged in, and
isnt prompting for drivers to for the hard disks. It simply says cant find
drive information, if I hit ok, it goes back one step to install vista.

prompting for drivers happens in the next step. (I know this because if I
unplug the satas it will see my one ide hdd and say that if the drive I want
to install on isnt visible to insert the driver disk.



"crash1013" wrote:

> I have an asus A8R-MVP, I am using ULi Sata raid drives for my XP 64
> installation. I installed another drive for vista. Asus did not have the
> Vista compatible driver, but I found it at nvidia using internet search. When
> Vista install showed no hard drives I put the floppy in the a: drive and
> clicked install drivers. Works fine.
>
>
> "voigtstr" wrote:
>
> > hardware
> > asus a8n sli deluxe
> > 2x74gig WD raptors (sata) in raid 0
> > 1x 120gig Maxtor (pata)
> > 2gig ram
> > 2 x geforce6600 gt
> >
> > When installing vista says it cant find the drive information. Hitting ok
> > goes back to install vista and the cycle repeats. I'm not prompted to install
> > the f6 drivers.
> >
> > If I unplug the sata drives, I can install vista fine to the maxtor drive
> > but I'm not prompted for the sata raid drivers.. if I try to install raid
> > after vista is installed, windows recognises the separate raptors, but doesnt
> > see them as raid 0
> >
> > Anyone else getting the same? anyone got a work around?

 
Reply With Quote
 
voigtstr
Guest
Posts: n/a

 
      06-11-2006
the message I get after hitting the install button and waiting a few seconds
is:
"Setup could not get information about the disks on your computer"
hitting enter goes back to the start screen. There is no option to load up
raid drivers.

"voigtstr" wrote:

> Vista cant get the drive information if I have the sata disks plugged in, and
> isnt prompting for drivers to for the hard disks. It simply says cant find
> drive information, if I hit ok, it goes back one step to install vista.
>
> prompting for drivers happens in the next step. (I know this because if I
> unplug the satas it will see my one ide hdd and say that if the drive I want
> to install on isnt visible to insert the driver disk.
>
>
>
> "crash1013" wrote:
>
> > I have an asus A8R-MVP, I am using ULi Sata raid drives for my XP 64
> > installation. I installed another drive for vista. Asus did not have the
> > Vista compatible driver, but I found it at nvidia using internet search. When
> > Vista install showed no hard drives I put the floppy in the a: drive and
> > clicked install drivers. Works fine.
> >
> >
> > "voigtstr" wrote:
> >
> > > hardware
> > > asus a8n sli deluxe
> > > 2x74gig WD raptors (sata) in raid 0
> > > 1x 120gig Maxtor (pata)
> > > 2gig ram
> > > 2 x geforce6600 gt
> > >
> > > When installing vista says it cant find the drive information. Hitting ok
> > > goes back to install vista and the cycle repeats. I'm not prompted to install
> > > the f6 drivers.
> > >
> > > If I unplug the sata drives, I can install vista fine to the maxtor drive
> > > but I'm not prompted for the sata raid drivers.. if I try to install raid
> > > after vista is installed, windows recognises the separate raptors, but doesnt
> > > see them as raid 0
> > >
> > > Anyone else getting the same? anyone got a work around?

 
Reply With Quote
 
Patrick Shepherd
Guest
Posts: n/a

 
      06-11-2006
I need that disk. Could you link to it please and I'll look again.

"crash1013" wrote:

> I have an asus A8R-MVP, I am using ULi Sata raid drives for my XP 64
> installation. I installed another drive for vista. Asus did not have the
> Vista compatible driver, but I found it at nvidia using internet search. When
> Vista install showed no hard drives I put the floppy in the a: drive and
> clicked install drivers. Works fine.
>
>
> "voigtstr" wrote:
>
> > hardware
> > asus a8n sli deluxe
> > 2x74gig WD raptors (sata) in raid 0
> > 1x 120gig Maxtor (pata)
> > 2gig ram
> > 2 x geforce6600 gt
> >
> > When installing vista says it cant find the drive information. Hitting ok
> > goes back to install vista and the cycle repeats. I'm not prompted to install
> > the f6 drivers.
> >
> > If I unplug the sata drives, I can install vista fine to the maxtor drive
> > but I'm not prompted for the sata raid drivers.. if I try to install raid
> > after vista is installed, windows recognises the separate raptors, but doesnt
> > see them as raid 0
> >
> > Anyone else getting the same? anyone got a work around?

 
Reply With Quote
 
Patrick Shepherd
Guest
Posts: n/a

 
      06-11-2006
I need that disk, could you link to it?

"crash1013" wrote:

> I have an asus A8R-MVP, I am using ULi Sata raid drives for my XP 64
> installation. I installed another drive for vista. Asus did not have the
> Vista compatible driver, but I found it at nvidia using internet search. When
> Vista install showed no hard drives I put the floppy in the a: drive and
> clicked install drivers. Works fine.
>
>
> "voigtstr" wrote:
>
> > hardware
> > asus a8n sli deluxe
> > 2x74gig WD raptors (sata) in raid 0
> > 1x 120gig Maxtor (pata)
> > 2gig ram
> > 2 x geforce6600 gt
> >
> > When installing vista says it cant find the drive information. Hitting ok
> > goes back to install vista and the cycle repeats. I'm not prompted to install
> > the f6 drivers.
> >
> > If I unplug the sata drives, I can install vista fine to the maxtor drive
> > but I'm not prompted for the sata raid drivers.. if I try to install raid
> > after vista is installed, windows recognises the separate raptors, but doesnt
> > see them as raid 0
> >
> > Anyone else getting the same? anyone got a work around?

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why Vista Install Problems with SATA Drives & SATA Raid? Libertybell12 Windows Vista General Discussion 4 03-08-2007 01:30 AM
PB Install RC1 with ICH6R RAID SATA controler pierrot bordeaux Windows Vista Installation 0 09-18-2006 06:56 PM
no provision to install SATA RAID drivers Aymincendiary Windows Vista Installation 0 09-16-2006 10:56 PM
Sata Raid prevents install voigtstr Windows Vista Installation 2 06-12-2006 03:51 AM
Sata Raid prevents install voigtstr Windows Vista Installation 0 06-11-2006 12:54 PM



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59