Windows Vista Tips

Windows Vista Tips > Newsgroups > Windows Update > Service Pack 2 installation fails

Reply
Thread Tools Display Modes

Service Pack 2 installation fails

 
 
CH in VT
Guest
Posts: n/a

 
      12-16-2004
I have tried several times since September to install the SP Service Pack 2.
The file/s download, but each time I begin the installation process, I get a
message that the installation has failed. I see several other messages on
the message board with this complaint. Is there a solution?

 
Reply With Quote
 
 
 
 
Torgeir Bakken \(MVP\)
Guest
Posts: n/a

 
      12-16-2004
CH in VT wrote:

> I have tried several times since September to install the SP Service Pack 2.
> The file/s download, but each time I begin the installation process, I get a
> message that the installation has failed. I see several other messages on
> the message board with this complaint. Is there a solution?

Hi

I suggest you use the full SP2 installer instead of Windows
Update to install SP2.

SP2 is available at the Microsoft Download Center
(standalone "network" version, 266 MB):

http://www.microsoft.com/downloads/d...5-9e368d3cdb5a

(disregard the "intended for IT professionals and developers" part,
it can be used on a single computer as well)


If you do not have broadband at home, but you have at work or you have
friends that have it, you can download it there and burn it to a CD.

If you think that the download is to large, you can get the same file
on a CD from Microsoft (a lot of computer magazines currently also
have the CD included).

The Windows XP SP2 CD order point:
http://www.microsoft.com/windowsxp/d...s/default.mspx


To remove the pending/failed download you now have, clean out the
Download folder (WU5's temporary download folder) located here:

%windir%\SoftwareDistribution\

(%windir% is typically C:\Windows)

You can use the procedure described here:

http://v5.windowsupdate.microsoft.co...cleid=11&ln=en

You might need to delete the DataStore folder mentioned in the link
above, as well as the Download folder.

Note that a side effect of deleting the DataStore folder is that you
lose your WU v5 History listing (not critical).


For folders you can consider deleting and other disk cleanup tips
after a successful SP2 installation, take a look here:

http://groups.google.com/groups?selm...TNGP15.phx.gbl


Before installing SP2, you should take a look at the
following sites:

What to Know Before You Download and Install Windows XP Service Pack 2
http://www.microsoft.com/windowsxp/s...hattoknow.mspx

How to successfully install Windows XP Service Pack 2.
http://www.fixyourwindows.com/winxpsp2install.htm

Service Pack Installation Checklist
http://www3.telus.net/dandemar/spackins.htm


Please take a look at this Microsoft knowledge base article as well:

Windows XP Service Pack 2 is not available to install from Windows
Update and is not offered by Automatic Updates
http://support.microsoft.com/?kbid=885627

*Important* part from the link above:

If you have T.V. Media from Total Velocity Corporation installed, or
your processor is a Intel P4 Prescott with C-0 stepping, you should
not install SP2.

Intel P4 Prescott processors came out February 2004, so if your
computer is older than that, this is not an issue for you. Also, if
you have a Dell, IBM or HP, this is not an issue.

If you suspect/know you have an Intel P4 Prescott processor, take a
look at the two following Web sites for what you need to do/have to
be able to install SP2 on the computer:

http://forum.aumha.org/viewtopic.php?t=7447
http://cquirke.mvps.org/sp2intel.htm

Newsflash:

Adware T.V. Media Program Removal Tool
http://support.microsoft.com/?kbid=886590

and

Microsoft have now released a fix for the problem where SP2 fails to
boot after installing it in a PC with the Prescott or a Celeron D CPU
(or fails to install in the case of slipstreamed cds). The problem is
described here:

http://go.microsoft.com/fwlink/?linkid=34535

and the download for the fix is available here (install it before you
install SP2):

http://www.microsoft.com/downloads/d...DisplayLang=en


Also, if you have a Dell Inspiron 1150 or 2650, you might get a
slow running system after installing SP2, take a look at this thread
for more on this:
http://groups.google.com/groups?thre...ws.prodigy.com

and here as well:

Inspiron 1150 Performance Loss
http://support.dell.com/support/topi...1090653#step16

http://support.dell.com/support/topi...t?DN=HO1090723


--
torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
Administration scripting examples and an ONLINE version of
the 1328 page Scripting Guide:
http://www.microsoft.com/technet/scr...r/default.mspx
 
Reply With Quote
 
CH in VT
Guest
Posts: n/a

 
      12-17-2004
Thanks, I've finally got service pack 2 installed.

"Torgeir Bakken (MVP)" wrote:

> CH in VT wrote:
>
> > I have tried several times since September to install the SP Service Pack 2.
> > The file/s download, but each time I begin the installation process, I get a
> > message that the installation has failed. I see several other messages on
> > the message board with this complaint. Is there a solution?

> Hi
>
> I suggest you use the full SP2 installer instead of Windows
> Update to install SP2.
>
> SP2 is available at the Microsoft Download Center
> (standalone "network" version, 266 MB):
>
> http://www.microsoft.com/downloads/d...5-9e368d3cdb5a
>
> (disregard the "intended for IT professionals and developers" part,
> it can be used on a single computer as well)
>
>
> If you do not have broadband at home, but you have at work or you have
> friends that have it, you can download it there and burn it to a CD.
>
> If you think that the download is to large, you can get the same file
> on a CD from Microsoft (a lot of computer magazines currently also
> have the CD included).
>
> The Windows XP SP2 CD order point:
> http://www.microsoft.com/windowsxp/d...s/default.mspx
>
>
> To remove the pending/failed download you now have, clean out the
> Download folder (WU5's temporary download folder) located here:
>
> %windir%\SoftwareDistribution\
>
> (%windir% is typically C:\Windows)
>
> You can use the procedure described here:
>
> http://v5.windowsupdate.microsoft.co...cleid=11&ln=en
>
> You might need to delete the DataStore folder mentioned in the link
> above, as well as the Download folder.
>
> Note that a side effect of deleting the DataStore folder is that you
> lose your WU v5 History listing (not critical).
>
>
> For folders you can consider deleting and other disk cleanup tips
> after a successful SP2 installation, take a look here:
>
> http://groups.google.com/groups?selm...TNGP15.phx.gbl
>
>
> Before installing SP2, you should take a look at the
> following sites:
>
> What to Know Before You Download and Install Windows XP Service Pack 2
> http://www.microsoft.com/windowsxp/s...hattoknow.mspx
>
> How to successfully install Windows XP Service Pack 2.
> http://www.fixyourwindows.com/winxpsp2install.htm
>
> Service Pack Installation Checklist
> http://www3.telus.net/dandemar/spackins.htm
>
>
> Please take a look at this Microsoft knowledge base article as well:
>
> Windows XP Service Pack 2 is not available to install from Windows
> Update and is not offered by Automatic Updates
> http://support.microsoft.com/?kbid=885627
>
> *Important* part from the link above:
>
> If you have T.V. Media from Total Velocity Corporation installed, or
> your processor is a Intel P4 Prescott with C-0 stepping, you should
> not install SP2.
>
> Intel P4 Prescott processors came out February 2004, so if your
> computer is older than that, this is not an issue for you. Also, if
> you have a Dell, IBM or HP, this is not an issue.
>
> If you suspect/know you have an Intel P4 Prescott processor, take a
> look at the two following Web sites for what you need to do/have to
> be able to install SP2 on the computer:
>
> http://forum.aumha.org/viewtopic.php?t=7447
> http://cquirke.mvps.org/sp2intel.htm
>
> Newsflash:
>
> Adware T.V. Media Program Removal Tool
> http://support.microsoft.com/?kbid=886590
>
> and
>
> Microsoft have now released a fix for the problem where SP2 fails to
> boot after installing it in a PC with the Prescott or a Celeron D CPU
> (or fails to install in the case of slipstreamed cds). The problem is
> described here:
>
> http://go.microsoft.com/fwlink/?linkid=34535
>
> and the download for the fix is available here (install it before you
> install SP2):
>
> http://www.microsoft.com/downloads/d...DisplayLang=en
>
>
> Also, if you have a Dell Inspiron 1150 or 2650, you might get a
> slow running system after installing SP2, take a look at this thread
> for more on this:
> http://groups.google.com/groups?thre...ws.prodigy.com
>
> and here as well:
>
> Inspiron 1150 Performance Loss
> http://support.dell.com/support/topi...1090653#step16
>
> http://support.dell.com/support/topi...t?DN=HO1090723
>
>
> --
> torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
> Administration scripting examples and an ONLINE version of
> the 1328 page Scripting Guide:
> http://www.microsoft.com/technet/scr...r/default.mspx
>

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Vista service pack 1 fails to install JeanT Windows Vista General Discussion 2 07-21-2008 06:06 PM
Windows Update fails after XP Service Pack 2 payshunz Windows Update 1 11-30-2004 02:07 AM
service pack update fails - wabimp.dll Windows Update 1 01-07-2004 08:39 AM
Install Fails for Q282010: MS Jet 4.0 Service Pack 7 (SP7) - Windows XP Lee Reedy Windows Update 6 08-15-2003 02:40 AM
XP service pack 1a install fails lydia Windows Update 1 07-19-2003 10:30 PM



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59