Windows Vista Tips

Windows Vista Tips > Newsgroups > Windows Update > sp2 to sp3

Reply
 
 
plugginaway
Guest
Posts: n/a

 
      11-29-2009
Update launches, but hangs at 'installing new version' of the update SW.

I have seen the downloadable exe's of sp3, anywhere from 300MB to 550mb.

do you have one to recommend?

thanx
 
Reply With Quote
 
 
 
 
Shenan Stanley
Guest
Posts: n/a

 
      11-29-2009
plugginaway wrote:
> Update launches, but hangs at 'installing new version' of the
> update SW.
> I have seen the downloadable exe's of sp3, anywhere from 300MB to
> 550mb.
> do you have one to recommend?


The actual installable Windows XP Service Pack 3 file does not have
variants.

Assuming you actually do mean and need Windows XP Service Pack 3 - here is
the method I have found works for the majority of people. Follow it
step-by-step, carefully and completely. Don't think you have done something
before, and even if you *know* you have done something before - do it again
as given...

Fix your file/registry permissions...

Ignore the title and follow the sub-section under "Advanced Troubleshooting"
titled, "Method 1: Reset the registry and the file permissions"
http://support.microsoft.com/kb/949377
*will take time
** Ignore the last step - you'll install SP3 shortly, but not now.

Reboot and ...

Download/install this:
http://support.microsoft.com/kb/290301

After installing, do the following:

Start button --> RUN --> type in:
"%ProgramFiles%\Windows Installer Clean Up\msizap.exe" g!
--> Click OK.
(The quotation marks and percentage signs and spacing should be exact.)

Download, install, run, update and perform a full scan (separately) with the
following two applications (freeware versions are the ones to use for this):

SuperAntiSpyware
http://www.superantispyware.com/

MalwareBytes
http://www.malwarebytes.com/

After performing a full scan with one and then the other and removing
whatever they both find completely, you may uninstall these products,
if you wish. You may be rebooting if they find something they cannot
get rid of otherwise.

Download and run the MSRT manually:
http://www.microsoft.com/security/ma...e/default.mspx

Reboot.

Download/Install the latest Windows Installer (for your OS):
( Windows XP 32-bit : WindowsXP-KB942288-v3-x86.exe )
http://www.microsoft.com/downloadS/d...displaylang=en

Reboot.

and...

Download the latest version of the Windows Update agent from here (x86):
http://go.microsoft.com/fwlink/?LinkID=91237
.... and save it to the root of your C:\ drive. After saving it to the root
of the C:\ drive, do the following:

Close all Internet Explorer windows and other applications.

Start button --> RUN and type in:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.

(If asked, select "Run.) --> Click on NEXT --> Select "I agree" and click on
NEXT --> When it finishes installing, click on "Finish"...

Reboot.

Then follow the instructions here:

How do I reset Windows Update components?
http://support.microsoft.com/kb/971058

Reboot.

Now for SP3...

1) Download the full SP3 installation file.

Windows XP Service Pack 3 Network Installation Package for
IT Professionals and Developers (works just as well for you.)
http://www.microsoft.com/downloads/d...8-1E1555D4F3D4

You are just saving it right now - not running it yet.

2) Ensure (as well as plausible) you have no spyware/malware by doing a full
scan with SuperAntiSpyware and MalwareBytes. If you are following
along, you have already done this!

3) CHKDSK
How to scan your disks for errors
http://support.microsoft.com/kb/315265
* will take time and a reboot

4) Defragment
How to Defragment your hard drives
http://support.microsoft.com/kb/314848
* will take time

5) Ensure your hardware drivers are up to date (from the hardware
manufacturer's respective web pages.) Never get hardware drivers
for hardware that was not created/sold by Microsoft from Microsoft.

6) Reboot right before you try to install SP3.

7) Disconnect from the internet before installing (physically disconnect -
pull the network cable or disable the router/modem.)

8) Uninstall any and all third-party firewall applications (ZoneAlarm, etc)
and utilize the built-in WIndows Firewall only.

9) Disable your antivirus and antispyware applications when you are about to
install SP3. Usually right-click on the icon in the taskbar gives you
a choice to do so.

Install SP3 by running the downloaded executable. Reboot when requested to
do so. Logon and let the machine 'settle' for about 10 minutes. Reboot.
Give it 5 minutes after logon to 'settle' - reboot.

After that - there will be more updates.

Log on as an user with administrative rights and open Internet Explorer
and visit http://windowsupdate.microsoft.com/ and select to do a
CUSTOM scan...

Every time you are about to click on something while at these web pages -
first press and hold down the CTRL key while you click on it. You can
release the CTRL key after clicking each time.

Once the scan is done, select just _ONE_ of the high priority updates
(deselect any others) and install it.

Reboot again.

If it did work - try the web page again - selecting no more than 3-5 at a
time. Rebooting as needed.

The Optional Software updates are generally safe - although I recommend
against the "Windows Search" one and any of the "Office Live" ones or
"Windows Live" ones for now. I would completely avoid the
Optional Hardware updates. Also - I do not see any urgent need to install
Internet Explorer 8 at this time.

Seriously - do all that. This is like antibiotics - don't skip a single
step, don't quit because you think things will be okay now - go through
until the end, until you have done everything given in the order given. If
you have a problem with a step come ask and let someone here get you
through that step. If you don't understand how to do a step, come back and
ask here about that step and let someone walk you through it.

Then - when done - let everyone here know if it worked for you - or if you
have more issues.

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html


 
Reply With Quote
 
PA Bear [MS MVP]
Guest
Posts: n/a

 
      11-29-2009
HOW TO get a computer running WinXP SP1(a) or SP2 fully patched
http://groups.google.com/group/micro...66ae41add7dd2b


"plugginaway" <anon> wrote in message
news:...
> Update launches, but hangs at 'installing new version' of the update SW.
>
> I have seen the downloadable exe's of sp3, anywhere from 300MB to 550mb.
>
> do you have one to recommend?
>
> thanx


 
Reply With Quote
 
plugginaway
Guest
Posts: n/a

 
      12-01-2009
went well until, 'reset update' Fixit 50202 'Failed to Process"

try again 2morrow.

the file i got from MS was xpsp3_5512.080413-2113_usa_x86fre_spcd.iso
554MB

piece o' cake!!!


and now the 316 MB one will oly dl at 85K...

thanx




Shenan Stanley wrote:
> plugginaway wrote:
>
>>Update launches, but hangs at 'installing new version' of the
>>update SW.
>>I have seen the downloadable exe's of sp3, anywhere from 300MB to
>>550mb.
>>do you have one to recommend?

>
>
> The actual installable Windows XP Service Pack 3 file does not have
> variants.
>
> Assuming you actually do mean and need Windows XP Service Pack 3 - here is
> the method I have found works for the majority of people. Follow it
> step-by-step, carefully and completely. Don't think you have done something
> before, and even if you *know* you have done something before - do it again
> as given...
>
> Fix your file/registry permissions...
>
> Ignore the title and follow the sub-section under "Advanced Troubleshooting"
> titled, "Method 1: Reset the registry and the file permissions"
> http://support.microsoft.com/kb/949377
> *will take time
> ** Ignore the last step - you'll install SP3 shortly, but not now.
>
> Reboot and ...
>
> Download/install this:
> http://support.microsoft.com/kb/290301
>
> After installing, do the following:
>
> Start button --> RUN --> type in:
> "%ProgramFiles%\Windows Installer Clean Up\msizap.exe" g!
> --> Click OK.
> (The quotation marks and percentage signs and spacing should be exact.)
>
> Download, install, run, update and perform a full scan (separately) with the
> following two applications (freeware versions are the ones to use for this):
>
> SuperAntiSpyware
> http://www.superantispyware.com/
>
> MalwareBytes
> http://www.malwarebytes.com/
>
> After performing a full scan with one and then the other and removing
> whatever they both find completely, you may uninstall these products,
> if you wish. You may be rebooting if they find something they cannot
> get rid of otherwise.
>
> Download and run the MSRT manually:
> http://www.microsoft.com/security/ma...e/default.mspx
>
> Reboot.
>
> Download/Install the latest Windows Installer (for your OS):
> ( Windows XP 32-bit : WindowsXP-KB942288-v3-x86.exe )
> http://www.microsoft.com/downloadS/d...displaylang=en
>
> Reboot.
>
> and...
>
> Download the latest version of the Windows Update agent from here (x86):
> http://go.microsoft.com/fwlink/?LinkID=91237
> ... and save it to the root of your C:\ drive. After saving it to the root
> of the C:\ drive, do the following:
>
> Close all Internet Explorer windows and other applications.
>
> Start button --> RUN and type in:
> %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
> --> Click OK.
>
> (If asked, select "Run.) --> Click on NEXT --> Select "I agree" and click on
> NEXT --> When it finishes installing, click on "Finish"...
>
> Reboot.
>
> Then follow the instructions here:
>
> How do I reset Windows Update components?
> http://support.microsoft.com/kb/971058
>
> Reboot.
>
> Now for SP3...
>
> 1) Download the full SP3 installation file.
>
> Windows XP Service Pack 3 Network Installation Package for
> IT Professionals and Developers (works just as well for you.)
> http://www.microsoft.com/downloads/d...8-1E1555D4F3D4
>
> You are just saving it right now - not running it yet.
>
> 2) Ensure (as well as plausible) you have no spyware/malware by doing a full
> scan with SuperAntiSpyware and MalwareBytes. If you are following
> along, you have already done this!
>
> 3) CHKDSK
> How to scan your disks for errors
> http://support.microsoft.com/kb/315265
> * will take time and a reboot
>
> 4) Defragment
> How to Defragment your hard drives
> http://support.microsoft.com/kb/314848
> * will take time
>
> 5) Ensure your hardware drivers are up to date (from the hardware
> manufacturer's respective web pages.) Never get hardware drivers
> for hardware that was not created/sold by Microsoft from Microsoft.
>
> 6) Reboot right before you try to install SP3.
>
> 7) Disconnect from the internet before installing (physically disconnect -
> pull the network cable or disable the router/modem.)
>
> 8) Uninstall any and all third-party firewall applications (ZoneAlarm, etc)
> and utilize the built-in WIndows Firewall only.
>
> 9) Disable your antivirus and antispyware applications when you are about to
> install SP3. Usually right-click on the icon in the taskbar gives you
> a choice to do so.
>
> Install SP3 by running the downloaded executable. Reboot when requested to
> do so. Logon and let the machine 'settle' for about 10 minutes. Reboot.
> Give it 5 minutes after logon to 'settle' - reboot.
>
> After that - there will be more updates.
>
> Log on as an user with administrative rights and open Internet Explorer
> and visit http://windowsupdate.microsoft.com/ and select to do a
> CUSTOM scan...
>
> Every time you are about to click on something while at these web pages -
> first press and hold down the CTRL key while you click on it. You can
> release the CTRL key after clicking each time.
>
> Once the scan is done, select just _ONE_ of the high priority updates
> (deselect any others) and install it.
>
> Reboot again.
>
> If it did work - try the web page again - selecting no more than 3-5 at a
> time. Rebooting as needed.
>
> The Optional Software updates are generally safe - although I recommend
> against the "Windows Search" one and any of the "Office Live" ones or
> "Windows Live" ones for now. I would completely avoid the
> Optional Hardware updates. Also - I do not see any urgent need to install
> Internet Explorer 8 at this time.
>
> Seriously - do all that. This is like antibiotics - don't skip a single
> step, don't quit because you think things will be okay now - go through
> until the end, until you have done everything given in the order given. If
> you have a problem with a step come ask and let someone here get you
> through that step. If you don't understand how to do a step, come back and
> ask here about that step and let someone walk you through it.
>
> Then - when done - let everyone here know if it worked for you - or if you
> have more issues.
>

 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off




1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59