What I am going to say may be applicable to some specific situations only. I
mean if it is a new machine which is in need of downloading a bunch of
updates and install them properly.
I ruined at least 5 or 6 installations of Vista before I realized what was
going on. Finally, I decided: I would not hit the power button to turn the
machine off unless I went to the bathroom, took a shower, came back and it
still has the black screen. Believe it or not it worked.
Subsequent boots were shorter and shorter. Now it all works just fine on 3
machines where I installed them myself. That dark time of uncertainty is now
in the past and fading.
"jason" <> wrote in message
news:90A209D9-1377-4758-81D2-...
>I have a Sony Vaio computer that is awesome and it's running vista.
> so the problem is that when ever i hit the power button the computer
> sleeps
> which is good because i can come back to it later and everything loads up
> correctly.
> the bad part is that when ever i power down from the start menu and later,
> turn the computer back on the computer will do it's normal boot and the
> little green bars will pop up and everything looks fine however, after the
> little green bars go away im left with a black screen and might i add,
> with
> no curser.
> i look at my hard drive light and see that there is no action going on and
> it just sits there. what do i need to do to get windows vista to boot and
> load fully.
> thanks for your help!!
> jason
>
>
|
Similar Threads
Linear Mode
