The error doesn't necessarily refer to your sata drive but could potentially
refer to the cd drive. I had this same bsod until I changed the dvdrw drive I
was using for installation. Apparently the atapi driver included with beta
does not work with my NEC ND-3540a drive OR it does not work with a cdrom
drive that is a master ( I have 2, so this one is master, and I ended up
using the slave drive for installation )
"Sundown Kid" wrote:
> Attempting to install from Windows XP x64 onto a blank 100GB partition.
> Appear to be having issues with onboard Via 8237 SATA controller on my ASUS
> A8V-E Deluxe motherboard. I've tried loading current x64 drivers for both
> SATA (5.20c) and PATA/IDE (1.40a) with no luck.
>
> Created CDROM disks with all of the driver files in the root directory, and
> am able to see and install them. Extracting files gets to 20% and then it
> does a graceful reboot with warning that it is going to restart the system
> to complete setup. Gets to the progress bar splash-screen and then the STOP
> error, 0x0000007b, 0xfffff98000606980, 0xffffffffc0000034.
>
> I've been running this system for a year with a single SATA drive (Seagate
> ST340083 2AS) running in IDE mode per the BIOS setting. Tried the Vista
> install with it set to IDE and then to SATA with the same result. Formatted
> the partition in NTFS prior to each attempt.
>
> The good news is that I can still get boot my original Windows XP x64, but
> have to catch the Vista boot menu when rebooting or it goes right to the
> STOP error.
>
> I've been searching for others having the same issue, and have found some
> references to a similar issue with Beta 1, but nothing current. Anyone else
> having this problem or know how to resolve?
>
> ASUS A8V-E DELUXE
> AMD FX-55 (90nm San Diego core)
> 4GB Crucial Ballistic Tracer DDR
> 400GB Seagate ST340083 2AS
> ATI x850XT PE PCI-e
> Realtek AC850 built-in
>
>
>
|
Similar Threads
Linear Mode
