Unable to Access Windows Update Website

Hi, i cannot access the Windows Update website. When i first clicked on the
website, the Internet Explorer will hang while it is checking for the latest
version of Windows Updating Software...Then, an error message will apear,
indicating that' Internet explorer has encountered a problem and needs to
close. We are sorry for the inconvenience'.

There is no error code displayed and the details for the error message are:
Appname: iexplorer.exe
Appver: 7.0.6000.16441
Modname: wuweb.dll
Mod Ver: 5.8.02469
Offset: 00018003

I'm using Internet Explorer 7 and Windows XP SP2.

I have also tried to run Windows Update from my Firefox browser but the same
problem occurs.

I have run CCleaner and scanned my computer for viruses and other stuff but
it still doesn't work. Pls advise.

Thanks and Regards
Clive

Try installing the new WU client and apply the hotfix

When you use Automatic Updates to scan for updates or to apply updates to applications
that use Windows Installer, you experience issues that involve the Svchost.exe process
http://support.microsoft.com:80/kb/932494

.....Quote from Mow ....

Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
Click the Open button
In the Open: line, click once on WindowsUpdateAgent30-x86.exe
It should now be highlighted in blue
Click once after the last quotation mark "
Push the Space Bar on the keyboard and enter /wuforce
The entry should now look like this

"C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce

Note the space after the last quotation mark and the /

Click OK or press Enter
Then download, save, close the browser, and install KB927891
NOTE: KB927891 is NOT supported nor intended for Vista

--
====================================
TaurArian [MS-MVP] 2005-2007 - Australia
====================================
How to make a good post: http://www.dts-l.org/goodpost.htm
Backup and data recovery: http://www.acronis.com.sg/
Enhancing file system performance: http://www.diskeeper.com/defrag.asp
Defending your machine: http://defendingyourmachine2.blogspot.com/


"Clive" <> wrote in message
news:416DA121-A41A-4920-9F0E-...
| Hi, i cannot access the Windows Update website. When i first clicked on the
| website, the Internet Explorer will hang while it is checking for the latest
| version of Windows Updating Software...Then, an error message will apear,
| indicating that' Internet explorer has encountered a problem and needs to
| close. We are sorry for the inconvenience'.
|
| There is no error code displayed and the details for the error message are:
| Appname: iexplorer.exe
| Appver: 7.0.6000.16441
| Modname: wuweb.dll
| Mod Ver: 5.8.02469
| Offset: 00018003
|
| I'm using Internet Explorer 7 and Windows XP SP2.
|
| I have also tried to run Windows Update from my Firefox browser but the same
| problem occurs.
|
| I have run CCleaner and scanned my computer for viruses and other stuff but
| it still doesn't work. Pls advise.
|
| Thanks and Regards
| Clive
|
|

Hi TaurArian

I tried the below instructions, but i got another error message while
installing the new WU client: Install failed with the following error number:
0x80070020.

I have tried disabling my antivirus and firewall before installing the file,
but the same error message appears.

Also, how do i go about adding the /wuforce to the file? When i click
'open', the application will start installing, and i do not see an
exclamation mark after the filename. I also cannot rename the file with the /
and spacebar.

Pls advise

Thanks and Regards
Clive

"TaurArian [MS-MVP]" wrote:

> Try installing the new WU client and apply the hotfix
>
> When you use Automatic Updates to scan for updates or to apply updates to applications
> that use Windows Installer, you experience issues that involve the Svchost.exe process
> http://support.microsoft.com:80/kb/932494
>
> .....Quote from Mow ....
>
> Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> Click the Open button
> In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> It should now be highlighted in blue
> Click once after the last quotation mark "
> Push the Space Bar on the keyboard and enter /wuforce
> The entry should now look like this
>
> "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
>
> Note the space after the last quotation mark and the /
>
> Click OK or press Enter
> Then download, save, close the browser, and install KB927891
> NOTE: KB927891 is NOT supported nor intended for Vista
>
> --
> ====================================
> TaurArian [MS-MVP] 2005-2007 - Australia
> ====================================
> How to make a good post: http://www.dts-l.org/goodpost.htm
> Backup and data recovery: http://www.acronis.com.sg/
> Enhancing file system performance: http://www.diskeeper.com/defrag.asp
> Defending your machine: http://defendingyourmachine2.blogspot.com/
>
>
> "Clive" <> wrote in message
> news:416DA121-A41A-4920-9F0E-...
> | Hi, i cannot access the Windows Update website. When i first clicked on the
> | website, the Internet Explorer will hang while it is checking for the latest
> | version of Windows Updating Software...Then, an error message will apear,
> | indicating that' Internet explorer has encountered a problem and needs to
> | close. We are sorry for the inconvenience'.
> |
> | There is no error code displayed and the details for the error message are:
> | Appname: iexplorer.exe
> | Appver: 7.0.6000.16441
> | Modname: wuweb.dll
> | Mod Ver: 5.8.02469
> | Offset: 00018003
> |
> | I'm using Internet Explorer 7 and Windows XP SP2.
> |
> | I have also tried to run Windows Update from my Firefox browser but the same
> | problem occurs.
> |
> | I have run CCleaner and scanned my computer for viruses and other stuff but
> | it still doesn't work. Pls advise.
> |
> | Thanks and Regards
> | Clive
> |
> |
>
>
>

1. You receive a "0x80070020 The process cannot access the file because it is
being used by another process" error message when you try to download an
update from Windows Update or from Microsoft Update
http://support.microsoft.com/default...b;EN-US;883825

2. Perhaps this will be easier -
If you need to reinstall the ActiveX controls (because they may have become
corrupt):-

Follow this article -
The Windows Update Web site and the Microsoft Update Web site do not scan
for updates when you repair a failed installation of Windows XP Service Pack
2 or of Windows XP Service Pack 1
http://support.microsoft.com/kb/916259

Note: WU Client 3.0 - Windows Update Agent
http://download.windowsupdate.com/v7...gent30-x86.exe

or for the 64 bit versio
http://download.windowsupdate.com/v7...gent30-x64.exe




"Clive" wrote:

> Hi TaurArian
>
> I tried the below instructions, but i got another error message while
> installing the new WU client: Install failed with the following error number:
> 0x80070020.
>
> I have tried disabling my antivirus and firewall before installing the file,
> but the same error message appears.
>
> Also, how do i go about adding the /wuforce to the file? When i click
> 'open', the application will start installing, and i do not see an
> exclamation mark after the filename. I also cannot rename the file with the /
> and spacebar.
>
> Pls advise
>
> Thanks and Regards
> Clive
>
> "TaurArian [MS-MVP]" wrote:
>
> > Try installing the new WU client and apply the hotfix
> >
> > When you use Automatic Updates to scan for updates or to apply updates to applications
> > that use Windows Installer, you experience issues that involve the Svchost.exe process
> > http://support.microsoft.com:80/kb/932494
> >
> > .....Quote from Mow ....
> >
> > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > Click the Open button
> > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > It should now be highlighted in blue
> > Click once after the last quotation mark "
> > Push the Space Bar on the keyboard and enter /wuforce
> > The entry should now look like this
> >
> > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> >
> > Note the space after the last quotation mark and the /
> >
> > Click OK or press Enter
> > Then download, save, close the browser, and install KB927891
> > NOTE: KB927891 is NOT supported nor intended for Vista
> >
> > --
> > ====================================
> > TaurArian [MS-MVP] 2005-2007 - Australia
> > ====================================
> > How to make a good post: http://www.dts-l.org/goodpost.htm
> > Backup and data recovery: http://www.acronis.com.sg/
> > Enhancing file system performance: http://www.diskeeper.com/defrag.asp
> > Defending your machine: http://defendingyourmachine2.blogspot.com/
> >
> >
> > "Clive" <> wrote in message
> > news:416DA121-A41A-4920-9F0E-...
> > | Hi, i cannot access the Windows Update website. When i first clicked on the
> > | website, the Internet Explorer will hang while it is checking for the latest
> > | version of Windows Updating Software...Then, an error message will apear,
> > | indicating that' Internet explorer has encountered a problem and needs to
> > | close. We are sorry for the inconvenience'.
> > |
> > | There is no error code displayed and the details for the error message are:
> > | Appname: iexplorer.exe
> > | Appver: 7.0.6000.16441
> > | Modname: wuweb.dll
> > | Mod Ver: 5.8.02469
> > | Offset: 00018003
> > |
> > | I'm using Internet Explorer 7 and Windows XP SP2.
> > |
> > | I have also tried to run Windows Update from my Firefox browser but the same
> > | problem occurs.
> > |
> > | I have run CCleaner and scanned my computer for viruses and other stuff but
> > | it still doesn't work. Pls advise.
> > |
> > | Thanks and Regards
> > | Clive
> > |
> > |
> >
> >
> >

Hi TaurArian

I have tried the below 2 methods, but i still cannot install the WU Update
client.

Furthermore, i could not delete some of the files highlighted in the
reinstalling of the ActiveX controls.

Also, i do not know how to add in the / wuforce in the WU update client exe
file (WindowsUpdateAgent30-x86.exe). I do not understand the instructions as
follows:

> > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > Click the Open button
> > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > It should now be highlighted in blue
> > > Click once after the last quotation mark "
> > > Push the Space Bar on the keyboard and enter /wuforce
> > > The entry should now look like this
> > >
> > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > >
> > > Note the space after the last quotation mark and the /
> > >
> > > Click OK or press Enter
> > > Then download, save, close the browser, and install KB927891
> > > NOTE: KB927891 is NOT supported nor intended for Vista

I am really at a loss here and hope that somebody will be able to help me
access the Microsoft Updates website once again.

Thanks and Regards
Clive


"TaurArian" wrote:

> 1. You receive a "0x80070020 The process cannot access the file because it is
> being used by another process" error message when you try to download an
> update from Windows Update or from Microsoft Update
> http://support.microsoft.com/default...b;EN-US;883825
>
> 2. Perhaps this will be easier -
> If you need to reinstall the ActiveX controls (because they may have become
> corrupt):-
>
> Follow this article -
> The Windows Update Web site and the Microsoft Update Web site do not scan
> for updates when you repair a failed installation of Windows XP Service Pack
> 2 or of Windows XP Service Pack 1
> http://support.microsoft.com/kb/916259
>
> Note: WU Client 3.0 - Windows Update Agent:
> http://download.windowsupdate.com/v7...gent30-x86.exe
>
> or for the 64 bit version
> http://download.windowsupdate.com/v7...gent30-x64.exe
>
>
>
>
> "Clive" wrote:
>
> > Hi TaurArian
> >
> > I tried the below instructions, but i got another error message while
> > installing the new WU client: Install failed with the following error number:
> > 0x80070020.
> >
> > I have tried disabling my antivirus and firewall before installing the file,
> > but the same error message appears.
> >
> > Also, how do i go about adding the /wuforce to the file? When i click
> > 'open', the application will start installing, and i do not see an
> > exclamation mark after the filename. I also cannot rename the file with the /
> > and spacebar.
> >
> > Pls advise
> >
> > Thanks and Regards
> > Clive
> >
> > "TaurArian [MS-MVP]" wrote:
> >
> > > Try installing the new WU client and apply the hotfix
> > >
> > > When you use Automatic Updates to scan for updates or to apply updates to applications
> > > that use Windows Installer, you experience issues that involve the Svchost.exe process
> > > http://support.microsoft.com:80/kb/932494
> > >
> > > .....Quote from Mow ....
> > >
> > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > Click the Open button
> > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > It should now be highlighted in blue
> > > Click once after the last quotation mark "
> > > Push the Space Bar on the keyboard and enter /wuforce
> > > The entry should now look like this
> > >
> > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > >
> > > Note the space after the last quotation mark and the /
> > >
> > > Click OK or press Enter
> > > Then download, save, close the browser, and install KB927891
> > > NOTE: KB927891 is NOT supported nor intended for Vista
> > >
> > > --
> > > ====================================
> > > TaurArian [MS-MVP] 2005-2007 - Australia
> > > ====================================
> > > How to make a good post: http://www.dts-l.org/goodpost.htm
> > > Backup and data recovery: http://www.acronis.com.sg/
> > > Enhancing file system performance: http://www.diskeeper.com/defrag.asp
> > > Defending your machine: http://defendingyourmachine2.blogspot.com/
> > >
> > >
> > > "Clive" <> wrote in message
> > > news:416DA121-A41A-4920-9F0E-...
> > > | Hi, i cannot access the Windows Update website. When i first clicked on the
> > > | website, the Internet Explorer will hang while it is checking for the latest
> > > | version of Windows Updating Software...Then, an error message will apear,
> > > | indicating that' Internet explorer has encountered a problem and needs to
> > > | close. We are sorry for the inconvenience'.
> > > |
> > > | There is no error code displayed and the details for the error message are:
> > > | Appname: iexplorer.exe
> > > | Appver: 7.0.6000.16441
> > > | Modname: wuweb.dll
> > > | Mod Ver: 5.8.02469
> > > | Offset: 00018003
> > > |
> > > | I'm using Internet Explorer 7 and Windows XP SP2.
> > > |
> > > | I have also tried to run Windows Update from my Firefox browser but the same
> > > | problem occurs.
> > > |
> > > | I have run CCleaner and scanned my computer for viruses and other stuff but
> > > | it still doesn't work. Pls advise.
> > > |
> > > | Thanks and Regards
> > > | Clive
> > > |
> > > |
> > >
> > >
> > >

After downloading the WU 3.0 client, did you try -

"then extract the files to a temp folder.
Open the temp folder, right-click Wusetup.inf, and then click Install"

as mentioned in this article:-
> > Follow this article -
> > The Windows Update Web site and the Microsoft Update Web site do not scan
> > for updates when you repair a failed installation of Windows XP Service Pack
> > 2 or of Windows XP Service Pack 1
> > http://support.microsoft.com/kb/916259



"Clive" wrote:

> Hi TaurArian
>
> I have tried the below 2 methods, but i still cannot install the WU Update
> client.
>
> Furthermore, i could not delete some of the files highlighted in the
> reinstalling of the ActiveX controls.
>
> Also, i do not know how to add in the / wuforce in the WU update client exe
> file (WindowsUpdateAgent30-x86.exe). I do not understand the instructions as
> follows:
>
> > > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > > Click the Open button
> > > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > > It should now be highlighted in blue
> > > > Click once after the last quotation mark "
> > > > Push the Space Bar on the keyboard and enter /wuforce
> > > > The entry should now look like this
> > > >
> > > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > > >
> > > > Note the space after the last quotation mark and the /
> > > >
> > > > Click OK or press Enter
> > > > Then download, save, close the browser, and install KB927891
> > > > NOTE: KB927891 is NOT supported nor intended for Vista
>
> I am really at a loss here and hope that somebody will be able to help me
> access the Microsoft Updates website once again.
>
> Thanks and Regards
> Clive
>
>
> "TaurArian" wrote:
>
> > 1. You receive a "0x80070020 The process cannot access the file because it is
> > being used by another process" error message when you try to download an
> > update from Windows Update or from Microsoft Update
> > http://support.microsoft.com/default...b;EN-US;883825
> >
> > 2. Perhaps this will be easier -
> > If you need to reinstall the ActiveX controls (because they may have become
> > corrupt):-
> >
> > Follow this article -
> > The Windows Update Web site and the Microsoft Update Web site do not scan
> > for updates when you repair a failed installation of Windows XP Service Pack
> > 2 or of Windows XP Service Pack 1
> > http://support.microsoft.com/kb/916259
> >
> > Note: WU Client 3.0 - Windows Update Agent:
> > http://download.windowsupdate.com/v7...gent30-x86.exe
> >
> > or for the 64 bit version
> > http://download.windowsupdate.com/v7...gent30-x64.exe
> >
> >
> >
> >
> > "Clive" wrote:
> >
> > > Hi TaurArian
> > >
> > > I tried the below instructions, but i got another error message while
> > > installing the new WU client: Install failed with the following error number:
> > > 0x80070020.
> > >
> > > I have tried disabling my antivirus and firewall before installing the file,
> > > but the same error message appears.
> > >
> > > Also, how do i go about adding the /wuforce to the file? When i click
> > > 'open', the application will start installing, and i do not see an
> > > exclamation mark after the filename. I also cannot rename the file with the /
> > > and spacebar.
> > >
> > > Pls advise
> > >
> > > Thanks and Regards
> > > Clive
> > >
> > > "TaurArian [MS-MVP]" wrote:
> > >
> > > > Try installing the new WU client and apply the hotfix
> > > >
> > > > When you use Automatic Updates to scan for updates or to apply updates to applications
> > > > that use Windows Installer, you experience issues that involve the Svchost.exe process
> > > > http://support.microsoft.com:80/kb/932494
> > > >
> > > > .....Quote from Mow ....
> > > >
> > > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > > Click the Open button
> > > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > > It should now be highlighted in blue
> > > > Click once after the last quotation mark "
> > > > Push the Space Bar on the keyboard and enter /wuforce
> > > > The entry should now look like this
> > > >
> > > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > > >
> > > > Note the space after the last quotation mark and the /
> > > >
> > > > Click OK or press Enter
> > > > Then download, save, close the browser, and install KB927891
> > > > NOTE: KB927891 is NOT supported nor intended for Vista
> > > >
> > > > --
> > > > ====================================
> > > > TaurArian [MS-MVP] 2005-2007 - Australia
> > > > ====================================
> > > > How to make a good post: http://www.dts-l.org/goodpost.htm
> > > > Backup and data recovery: http://www.acronis.com.sg/
> > > > Enhancing file system performance: http://www.diskeeper.com/defrag.asp
> > > > Defending your machine: http://defendingyourmachine2.blogspot.com/
> > > >
> > > >
> > > > "Clive" <> wrote in message
> > > > news:416DA121-A41A-4920-9F0E-...
> > > > | Hi, i cannot access the Windows Update website. When i first clicked on the
> > > > | website, the Internet Explorer will hang while it is checking for the latest
> > > > | version of Windows Updating Software...Then, an error message will apear,
> > > > | indicating that' Internet explorer has encountered a problem and needs to
> > > > | close. We are sorry for the inconvenience'.
> > > > |
> > > > | There is no error code displayed and the details for the error message are:
> > > > | Appname: iexplorer.exe
> > > > | Appver: 7.0.6000.16441
> > > > | Modname: wuweb.dll
> > > > | Mod Ver: 5.8.02469
> > > > | Offset: 00018003
> > > > |
> > > > | I'm using Internet Explorer 7 and Windows XP SP2.
> > > > |
> > > > | I have also tried to run Windows Update from my Firefox browser but the same
> > > > | problem occurs.
> > > > |
> > > > | I have run CCleaner and scanned my computer for viruses and other stuff but
> > > > | it still doesn't work. Pls advise.
> > > > |
> > > > | Thanks and Regards
> > > > | Clive
> > > > |
> > > > |
> > > >
> > > >
> > > >

Hi TauArian

Yes, i did that previously. But it didn't work too. Any other advice?


Thanks and Regards
Clive


"TaurArian" wrote:

> After downloading the WU 3.0 client, did you try -
>
> "then extract the files to a temp folder.
> Open the temp folder, right-click Wusetup.inf, and then click Install"
>
> as mentioned in this article:-
> > > Follow this article -
> > > The Windows Update Web site and the Microsoft Update Web site do not scan
> > > for updates when you repair a failed installation of Windows XP Service Pack
> > > 2 or of Windows XP Service Pack 1
> > > http://support.microsoft.com/kb/916259
>
>
>
> "Clive" wrote:
>
> > Hi TaurArian
> >
> > I have tried the below 2 methods, but i still cannot install the WU Update
> > client.
> >
> > Furthermore, i could not delete some of the files highlighted in the
> > reinstalling of the ActiveX controls.
> >
> > Also, i do not know how to add in the / wuforce in the WU update client exe
> > file (WindowsUpdateAgent30-x86.exe). I do not understand the instructions as
> > follows:
> >
> > > > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > > > Click the Open button
> > > > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > > > It should now be highlighted in blue
> > > > > Click once after the last quotation mark "
> > > > > Push the Space Bar on the keyboard and enter /wuforce
> > > > > The entry should now look like this
> > > > >
> > > > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > > > >
> > > > > Note the space after the last quotation mark and the /
> > > > >
> > > > > Click OK or press Enter
> > > > > Then download, save, close the browser, and install KB927891
> > > > > NOTE: KB927891 is NOT supported nor intended for Vista
> >
> > I am really at a loss here and hope that somebody will be able to help me
> > access the Microsoft Updates website once again.
> >
> > Thanks and Regards
> > Clive
> >
> >
> > "TaurArian" wrote:
> >
> > > 1. You receive a "0x80070020 The process cannot access the file because it is
> > > being used by another process" error message when you try to download an
> > > update from Windows Update or from Microsoft Update
> > > http://support.microsoft.com/default...b;EN-US;883825
> > >
> > > 2. Perhaps this will be easier -
> > > If you need to reinstall the ActiveX controls (because they may have become
> > > corrupt):-
> > >
> > > Follow this article -
> > > The Windows Update Web site and the Microsoft Update Web site do not scan
> > > for updates when you repair a failed installation of Windows XP Service Pack
> > > 2 or of Windows XP Service Pack 1
> > > http://support.microsoft.com/kb/916259
> > >
> > > Note: WU Client 3.0 - Windows Update Agent:
> > > http://download.windowsupdate.com/v7...gent30-x86.exe
> > >
> > > or for the 64 bit version
> > > http://download.windowsupdate.com/v7...gent30-x64.exe
> > >
> > >
> > >
> > >
> > > "Clive" wrote:
> > >
> > > > Hi TaurArian
> > > >
> > > > I tried the below instructions, but i got another error message while
> > > > installing the new WU client: Install failed with the following error number:
> > > > 0x80070020.
> > > >
> > > > I have tried disabling my antivirus and firewall before installing the file,
> > > > but the same error message appears.
> > > >
> > > > Also, how do i go about adding the /wuforce to the file? When i click
> > > > 'open', the application will start installing, and i do not see an
> > > > exclamation mark after the filename. I also cannot rename the file with the /
> > > > and spacebar.
> > > >
> > > > Pls advise
> > > >
> > > > Thanks and Regards
> > > > Clive
> > > >
> > > > "TaurArian [MS-MVP]" wrote:
> > > >
> > > > > Try installing the new WU client and apply the hotfix
> > > > >
> > > > > When you use Automatic Updates to scan for updates or to apply updates to applications
> > > > > that use Windows Installer, you experience issues that involve the Svchost.exe process
> > > > > http://support.microsoft.com:80/kb/932494
> > > > >
> > > > > .....Quote from Mow ....
> > > > >
> > > > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > > > Click the Open button
> > > > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > > > It should now be highlighted in blue
> > > > > Click once after the last quotation mark "
> > > > > Push the Space Bar on the keyboard and enter /wuforce
> > > > > The entry should now look like this
> > > > >
> > > > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > > > >
> > > > > Note the space after the last quotation mark and the /
> > > > >
> > > > > Click OK or press Enter
> > > > > Then download, save, close the browser, and install KB927891
> > > > > NOTE: KB927891 is NOT supported nor intended for Vista
> > > > >
> > > > > --
> > > > > ====================================
> > > > > TaurArian [MS-MVP] 2005-2007 - Australia
> > > > > ====================================
> > > > > How to make a good post: http://www.dts-l.org/goodpost.htm
> > > > > Backup and data recovery: http://www.acronis.com.sg/
> > > > > Enhancing file system performance: http://www.diskeeper.com/defrag.asp
> > > > > Defending your machine: http://defendingyourmachine2.blogspot.com/
> > > > >
> > > > >
> > > > > "Clive" <> wrote in message
> > > > > news:416DA121-A41A-4920-9F0E-...
> > > > > | Hi, i cannot access the Windows Update website. When i first clicked on the
> > > > > | website, the Internet Explorer will hang while it is checking for the latest
> > > > > | version of Windows Updating Software...Then, an error message will apear,
> > > > > | indicating that' Internet explorer has encountered a problem and needs to
> > > > > | close. We are sorry for the inconvenience'.
> > > > > |
> > > > > | There is no error code displayed and the details for the error message are:
> > > > > | Appname: iexplorer.exe
> > > > > | Appver: 7.0.6000.16441
> > > > > | Modname: wuweb.dll
> > > > > | Mod Ver: 5.8.02469
> > > > > | Offset: 00018003
> > > > > |
> > > > > | I'm using Internet Explorer 7 and Windows XP SP2.
> > > > > |
> > > > > | I have also tried to run Windows Update from my Firefox browser but the same
> > > > > | problem occurs.
> > > > > |
> > > > > | I have run CCleaner and scanned my computer for viruses and other stuff but
> > > > > | it still doesn't work. Pls advise.
> > > > > |
> > > > > | Thanks and Regards
> > > > > | Clive
> > > > > |
> > > > > |
> > > > >
> > > > >
> > > > >

Clear out your temporary internet files
Run some hard disk maintenance like chkdsk, defrag

Then you may need to re-registered some files:

1. Click Start.
2. Choose Run.
3. In the Run box, type (pressing okay after each one) :-

net stop wuauserv

Repeat for the following:
regsvr32 wuapi.dll
regsvr32 wups.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wuweb.dll
regsvr32 MSXML3.dll
regsvr32 qmgr.dll
regsvr32 qmgrprxy.dll
regsvr32 jscript.dll

net start wuauserv

Try again.

Starting to run out of ideas here.


"Clive" wrote:

> Hi TauArian
>
> Yes, i did that previously. But it didn't work too. Any other advice?
>
>
> Thanks and Regards
> Clive
>
>
> "TaurArian" wrote:
>
> > After downloading the WU 3.0 client, did you try -
> >
> > "then extract the files to a temp folder.
> > Open the temp folder, right-click Wusetup.inf, and then click Install"
> >
> > as mentioned in this article:-
> > > > Follow this article -
> > > > The Windows Update Web site and the Microsoft Update Web site do not scan
> > > > for updates when you repair a failed installation of Windows XP Service Pack
> > > > 2 or of Windows XP Service Pack 1
> > > > http://support.microsoft.com/kb/916259
> >
> >
> >
> > "Clive" wrote:
> >
> > > Hi TaurArian
> > >
> > > I have tried the below 2 methods, but i still cannot install the WU Update
> > > client.
> > >
> > > Furthermore, i could not delete some of the files highlighted in the
> > > reinstalling of the ActiveX controls.
> > >
> > > Also, i do not know how to add in the / wuforce in the WU update client exe
> > > file (WindowsUpdateAgent30-x86.exe). I do not understand the instructions as
> > > follows:
> > >
> > > > > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > > > > Click the Open button
> > > > > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > > > > It should now be highlighted in blue
> > > > > > Click once after the last quotation mark "
> > > > > > Push the Space Bar on the keyboard and enter /wuforce
> > > > > > The entry should now look like this
> > > > > >
> > > > > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > > > > >
> > > > > > Note the space after the last quotation mark and the /
> > > > > >
> > > > > > Click OK or press Enter
> > > > > > Then download, save, close the browser, and install KB927891
> > > > > > NOTE: KB927891 is NOT supported nor intended for Vista
> > >
> > > I am really at a loss here and hope that somebody will be able to help me
> > > access the Microsoft Updates website once again.
> > >
> > > Thanks and Regards
> > > Clive
> > >
> > >
> > > "TaurArian" wrote:
> > >
> > > > 1. You receive a "0x80070020 The process cannot access the file because it is
> > > > being used by another process" error message when you try to download an
> > > > update from Windows Update or from Microsoft Update
> > > > http://support.microsoft.com/default...b;EN-US;883825
> > > >
> > > > 2. Perhaps this will be easier -
> > > > If you need to reinstall the ActiveX controls (because they may have become
> > > > corrupt):-
> > > >
> > > > Follow this article -
> > > > The Windows Update Web site and the Microsoft Update Web site do not scan
> > > > for updates when you repair a failed installation of Windows XP Service Pack
> > > > 2 or of Windows XP Service Pack 1
> > > > http://support.microsoft.com/kb/916259
> > > >
> > > > Note: WU Client 3.0 - Windows Update Agent:
> > > > http://download.windowsupdate.com/v7...gent30-x86.exe
> > > >
> > > > or for the 64 bit version
> > > > http://download.windowsupdate.com/v7...gent30-x64.exe
> > > >
> > > >
> > > >
> > > >
> > > > "Clive" wrote:
> > > >
> > > > > Hi TaurArian
> > > > >
> > > > > I tried the below instructions, but i got another error message while
> > > > > installing the new WU client: Install failed with the following error number:
> > > > > 0x80070020.
> > > > >
> > > > > I have tried disabling my antivirus and firewall before installing the file,
> > > > > but the same error message appears.
> > > > >
> > > > > Also, how do i go about adding the /wuforce to the file? When i click
> > > > > 'open', the application will start installing, and i do not see an
> > > > > exclamation mark after the filename. I also cannot rename the file with the /
> > > > > and spacebar.
> > > > >
> > > > > Pls advise
> > > > >
> > > > > Thanks and Regards
> > > > > Clive
> > > > >
> > > > > "TaurArian [MS-MVP]" wrote:
> > > > >
> > > > > > Try installing the new WU client and apply the hotfix
> > > > > >
> > > > > > When you use Automatic Updates to scan for updates or to apply updates to applications
> > > > > > that use Windows Installer, you experience issues that involve the Svchost.exe process
> > > > > > http://support.microsoft.com:80/kb/932494
> > > > > >
> > > > > > .....Quote from Mow ....
> > > > > >
> > > > > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > > > > Click the Open button
> > > > > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > > > > It should now be highlighted in blue
> > > > > > Click once after the last quotation mark "
> > > > > > Push the Space Bar on the keyboard and enter /wuforce
> > > > > > The entry should now look like this
> > > > > >
> > > > > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > > > > >
> > > > > > Note the space after the last quotation mark and the /
> > > > > >
> > > > > > Click OK or press Enter
> > > > > > Then download, save, close the browser, and install KB927891
> > > > > > NOTE: KB927891 is NOT supported nor intended for Vista
> > > > > >
> > > > > > --
> > > > > > ====================================
> > > > > > TaurArian [MS-MVP] 2005-2007 - Australia
> > > > > > ====================================
> > > > > > How to make a good post: http://www.dts-l.org/goodpost.htm
> > > > > > Backup and data recovery: http://www.acronis.com.sg/
> > > > > > Enhancing file system performance: http://www.diskeeper.com/defrag.asp
> > > > > > Defending your machine: http://defendingyourmachine2.blogspot.com/
> > > > > >
> > > > > >
> > > > > > "Clive" <> wrote in message
> > > > > > news:416DA121-A41A-4920-9F0E-...
> > > > > > | Hi, i cannot access the Windows Update website. When i first clicked on the
> > > > > > | website, the Internet Explorer will hang while it is checking for the latest
> > > > > > | version of Windows Updating Software...Then, an error message will apear,
> > > > > > | indicating that' Internet explorer has encountered a problem and needs to
> > > > > > | close. We are sorry for the inconvenience'.
> > > > > > |
> > > > > > | There is no error code displayed and the details for the error message are:
> > > > > > | Appname: iexplorer.exe
> > > > > > | Appver: 7.0.6000.16441
> > > > > > | Modname: wuweb.dll
> > > > > > | Mod Ver: 5.8.02469
> > > > > > | Offset: 00018003
> > > > > > |
> > > > > > | I'm using Internet Explorer 7 and Windows XP SP2.
> > > > > > |
> > > > > > | I have also tried to run Windows Update from my Firefox browser but the same
> > > > > > | problem occurs.
> > > > > > |
> > > > > > | I have run CCleaner and scanned my computer for viruses and other stuff but
> > > > > > | it still doesn't work. Pls advise.
> > > > > > |
> > > > > > | Thanks and Regards
> > > > > > | Clive
> > > > > > |
> > > > > > |
> > > > > >
> > > > > >
> > > > > >

Hi TauArian

Have tried the below instructions, but still no use. What should i do?

Thanks and Regards
Clive

"TaurArian" wrote:

> Clear out your temporary internet files
> Run some hard disk maintenance like chkdsk, defrag
>
> Then you may need to re-registered some files:
>
> 1. Click Start.
> 2. Choose Run.
> 3. In the Run box, type (pressing okay after each one) :-
>
> net stop wuauserv
>
> Repeat for the following:
> regsvr32 wuapi.dll
> regsvr32 wups.dll
> regsvr32 wuaueng.dll
> regsvr32 wuaueng1.dll
> regsvr32 wucltui.dll
> regsvr32 wuweb.dll
> regsvr32 MSXML3.dll
> regsvr32 qmgr.dll
> regsvr32 qmgrprxy.dll
> regsvr32 jscript.dll
>
> net start wuauserv
>
> Try again.
>
> Starting to run out of ideas here.
>
>
> "Clive" wrote:
>
> > Hi TauArian
> >
> > Yes, i did that previously. But it didn't work too. Any other advice?
> >
> >
> > Thanks and Regards
> > Clive
> >
> >
> > "TaurArian" wrote:
> >
> > > After downloading the WU 3.0 client, did you try -
> > >
> > > "then extract the files to a temp folder.
> > > Open the temp folder, right-click Wusetup.inf, and then click Install"
> > >
> > > as mentioned in this article:-
> > > > > Follow this article -
> > > > > The Windows Update Web site and the Microsoft Update Web site do not scan
> > > > > for updates when you repair a failed installation of Windows XP Service Pack
> > > > > 2 or of Windows XP Service Pack 1
> > > > > http://support.microsoft.com/kb/916259
> > >
> > >
> > >
> > > "Clive" wrote:
> > >
> > > > Hi TaurArian
> > > >
> > > > I have tried the below 2 methods, but i still cannot install the WU Update
> > > > client.
> > > >
> > > > Furthermore, i could not delete some of the files highlighted in the
> > > > reinstalling of the ActiveX controls.
> > > >
> > > > Also, i do not know how to add in the / wuforce in the WU update client exe
> > > > file (WindowsUpdateAgent30-x86.exe). I do not understand the instructions as
> > > > follows:
> > > >
> > > > > > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > > > > > Click the Open button
> > > > > > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > > > > > It should now be highlighted in blue
> > > > > > > Click once after the last quotation mark "
> > > > > > > Push the Space Bar on the keyboard and enter /wuforce
> > > > > > > The entry should now look like this
> > > > > > >
> > > > > > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > > > > > >
> > > > > > > Note the space after the last quotation mark and the /
> > > > > > >
> > > > > > > Click OK or press Enter
> > > > > > > Then download, save, close the browser, and install KB927891
> > > > > > > NOTE: KB927891 is NOT supported nor intended for Vista
> > > >
> > > > I am really at a loss here and hope that somebody will be able to help me
> > > > access the Microsoft Updates website once again.
> > > >
> > > > Thanks and Regards
> > > > Clive
> > > >
> > > >
> > > > "TaurArian" wrote:
> > > >
> > > > > 1. You receive a "0x80070020 The process cannot access the file because it is
> > > > > being used by another process" error message when you try to download an
> > > > > update from Windows Update or from Microsoft Update
> > > > > http://support.microsoft.com/default...b;EN-US;883825
> > > > >
> > > > > 2. Perhaps this will be easier -
> > > > > If you need to reinstall the ActiveX controls (because they may have become
> > > > > corrupt):-
> > > > >
> > > > > Follow this article -
> > > > > The Windows Update Web site and the Microsoft Update Web site do not scan
> > > > > for updates when you repair a failed installation of Windows XP Service Pack
> > > > > 2 or of Windows XP Service Pack 1
> > > > > http://support.microsoft.com/kb/916259
> > > > >
> > > > > Note: WU Client 3.0 - Windows Update Agent:
> > > > > http://download.windowsupdate.com/v7...gent30-x86.exe
> > > > >
> > > > > or for the 64 bit version
> > > > > http://download.windowsupdate.com/v7...gent30-x64.exe
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > "Clive" wrote:
> > > > >
> > > > > > Hi TaurArian
> > > > > >
> > > > > > I tried the below instructions, but i got another error message while
> > > > > > installing the new WU client: Install failed with the following error number:
> > > > > > 0x80070020.
> > > > > >
> > > > > > I have tried disabling my antivirus and firewall before installing the file,
> > > > > > but the same error message appears.
> > > > > >
> > > > > > Also, how do i go about adding the /wuforce to the file? When i click
> > > > > > 'open', the application will start installing, and i do not see an
> > > > > > exclamation mark after the filename. I also cannot rename the file with the /
> > > > > > and spacebar.
> > > > > >
> > > > > > Pls advise
> > > > > >
> > > > > > Thanks and Regards
> > > > > > Clive
> > > > > >
> > > > > > "TaurArian [MS-MVP]" wrote:
> > > > > >
> > > > > > > Try installing the new WU client and apply the hotfix
> > > > > > >
> > > > > > > When you use Automatic Updates to scan for updates or to apply updates to applications
> > > > > > > that use Windows Installer, you experience issues that involve the Svchost.exe process
> > > > > > > http://support.microsoft.com:80/kb/932494
> > > > > > >
> > > > > > > .....Quote from Mow ....
> > > > > > >
> > > > > > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > > > > > Click the Open button
> > > > > > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > > > > > It should now be highlighted in blue
> > > > > > > Click once after the last quotation mark "
> > > > > > > Push the Space Bar on the keyboard and enter /wuforce
> > > > > > > The entry should now look like this
> > > > > > >
> > > > > > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > > > > > >
> > > > > > > Note the space after the last quotation mark and the /
> > > > > > >
> > > > > > > Click OK or press Enter
> > > > > > > Then download, save, close the browser, and install KB927891
> > > > > > > NOTE: KB927891 is NOT supported nor intended for Vista
> > > > > > >
> > > > > > > --
> > > > > > > ====================================
> > > > > > > TaurArian [MS-MVP] 2005-2007 - Australia
> > > > > > > ====================================
> > > > > > > How to make a good post: http://www.dts-l.org/goodpost.htm
> > > > > > > Backup and data recovery: http://www.acronis.com.sg/
> > > > > > > Enhancing file system performance: http://www.diskeeper.com/defrag.asp
> > > > > > > Defending your machine: http://defendingyourmachine2.blogspot.com/
> > > > > > >
> > > > > > >
> > > > > > > "Clive" <> wrote in message
> > > > > > > news:416DA121-A41A-4920-9F0E-...
> > > > > > > | Hi, i cannot access the Windows Update website. When i first clicked on the
> > > > > > > | website, the Internet Explorer will hang while it is checking for the latest
> > > > > > > | version of Windows Updating Software...Then, an error message will apear,
> > > > > > > | indicating that' Internet explorer has encountered a problem and needs to
> > > > > > > | close. We are sorry for the inconvenience'.
> > > > > > > |
> > > > > > > | There is no error code displayed and the details for the error message are:
> > > > > > > | Appname: iexplorer.exe
> > > > > > > | Appver: 7.0.6000.16441
> > > > > > > | Modname: wuweb.dll
> > > > > > > | Mod Ver: 5.8.02469
> > > > > > > | Offset: 00018003
> > > > > > > |
> > > > > > > | I'm using Internet Explorer 7 and Windows XP SP2.
> > > > > > > |
> > > > > > > | I have also tried to run Windows Update from my Firefox browser but the same
> > > > > > > | problem occurs.
> > > > > > > |
> > > > > > > | I have run CCleaner and scanned my computer for viruses and other stuff but
> > > > > > > | it still doesn't work. Pls advise.
> > > > > > > |
> > > > > > > | Thanks and Regards
> > > > > > > | Clive
> > > > > > > |
> > > > > > > |
> > > > > > >
> > > > > > >
> > > > > > >

Hi TaurArian

Have followed your instructions below, but still no use. What should i do?

Thanks and Regards
Clive

"TaurArian" wrote:

> Clear out your temporary internet files
> Run some hard disk maintenance like chkdsk, defrag
>
> Then you may need to re-registered some files:
>
> 1. Click Start.
> 2. Choose Run.
> 3. In the Run box, type (pressing okay after each one) :-
>
> net stop wuauserv
>
> Repeat for the following:
> regsvr32 wuapi.dll
> regsvr32 wups.dll
> regsvr32 wuaueng.dll
> regsvr32 wuaueng1.dll
> regsvr32 wucltui.dll
> regsvr32 wuweb.dll
> regsvr32 MSXML3.dll
> regsvr32 qmgr.dll
> regsvr32 qmgrprxy.dll
> regsvr32 jscript.dll
>
> net start wuauserv
>
> Try again.
>
> Starting to run out of ideas here.
>
>
> "Clive" wrote:
>
> > Hi TauArian
> >
> > Yes, i did that previously. But it didn't work too. Any other advice?
> >
> >
> > Thanks and Regards
> > Clive
> >
> >
> > "TaurArian" wrote:
> >
> > > After downloading the WU 3.0 client, did you try -
> > >
> > > "then extract the files to a temp folder.
> > > Open the temp folder, right-click Wusetup.inf, and then click Install"
> > >
> > > as mentioned in this article:-
> > > > > Follow this article -
> > > > > The Windows Update Web site and the Microsoft Update Web site do not scan
> > > > > for updates when you repair a failed installation of Windows XP Service Pack
> > > > > 2 or of Windows XP Service Pack 1
> > > > > http://support.microsoft.com/kb/916259
> > >
> > >
> > >
> > > "Clive" wrote:
> > >
> > > > Hi TaurArian
> > > >
> > > > I have tried the below 2 methods, but i still cannot install the WU Update
> > > > client.
> > > >
> > > > Furthermore, i could not delete some of the files highlighted in the
> > > > reinstalling of the ActiveX controls.
> > > >
> > > > Also, i do not know how to add in the / wuforce in the WU update client exe
> > > > file (WindowsUpdateAgent30-x86.exe). I do not understand the instructions as
> > > > follows:
> > > >
> > > > > > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > > > > > Click the Open button
> > > > > > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > > > > > It should now be highlighted in blue
> > > > > > > Click once after the last quotation mark "
> > > > > > > Push the Space Bar on the keyboard and enter /wuforce
> > > > > > > The entry should now look like this
> > > > > > >
> > > > > > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > > > > > >
> > > > > > > Note the space after the last quotation mark and the /
> > > > > > >
> > > > > > > Click OK or press Enter
> > > > > > > Then download, save, close the browser, and install KB927891
> > > > > > > NOTE: KB927891 is NOT supported nor intended for Vista
> > > >
> > > > I am really at a loss here and hope that somebody will be able to help me
> > > > access the Microsoft Updates website once again.
> > > >
> > > > Thanks and Regards
> > > > Clive
> > > >
> > > >
> > > > "TaurArian" wrote:
> > > >
> > > > > 1. You receive a "0x80070020 The process cannot access the file because it is
> > > > > being used by another process" error message when you try to download an
> > > > > update from Windows Update or from Microsoft Update
> > > > > http://support.microsoft.com/default...b;EN-US;883825
> > > > >
> > > > > 2. Perhaps this will be easier -
> > > > > If you need to reinstall the ActiveX controls (because they may have become
> > > > > corrupt):-
> > > > >
> > > > > Follow this article -
> > > > > The Windows Update Web site and the Microsoft Update Web site do not scan
> > > > > for updates when you repair a failed installation of Windows XP Service Pack
> > > > > 2 or of Windows XP Service Pack 1
> > > > > http://support.microsoft.com/kb/916259
> > > > >
> > > > > Note: WU Client 3.0 - Windows Update Agent:
> > > > > http://download.windowsupdate.com/v7...gent30-x86.exe
> > > > >
> > > > > or for the 64 bit version
> > > > > http://download.windowsupdate.com/v7...gent30-x64.exe
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > "Clive" wrote:
> > > > >
> > > > > > Hi TaurArian
> > > > > >
> > > > > > I tried the below instructions, but i got another error message while
> > > > > > installing the new WU client: Install failed with the following error number:
> > > > > > 0x80070020.
> > > > > >
> > > > > > I have tried disabling my antivirus and firewall before installing the file,
> > > > > > but the same error message appears.
> > > > > >
> > > > > > Also, how do i go about adding the /wuforce to the file? When i click
> > > > > > 'open', the application will start installing, and i do not see an
> > > > > > exclamation mark after the filename. I also cannot rename the file with the /
> > > > > > and spacebar.
> > > > > >
> > > > > > Pls advise
> > > > > >
> > > > > > Thanks and Regards
> > > > > > Clive
> > > > > >
> > > > > > "TaurArian [MS-MVP]" wrote:
> > > > > >
> > > > > > > Try installing the new WU client and apply the hotfix
> > > > > > >
> > > > > > > When you use Automatic Updates to scan for updates or to apply updates to applications
> > > > > > > that use Windows Installer, you experience issues that involve the Svchost.exe process
> > > > > > > http://support.microsoft.com:80/kb/932494
> > > > > > >
> > > > > > > .....Quote from Mow ....
> > > > > > >
> > > > > > > Navigate to where WindowsUpdateAgent30-x86.exe was saved and click once on it
> > > > > > > Click the Open button
> > > > > > > In the Open: line, click once on WindowsUpdateAgent30-x86.exe
> > > > > > > It should now be highlighted in blue
> > > > > > > Click once after the last quotation mark "
> > > > > > > Push the Space Bar on the keyboard and enter /wuforce
> > > > > > > The entry should now look like this
> > > > > > >
> > > > > > > "C:\<locationoffile>\WindowsUpdateAgent30-x86.exe" /wuforce
> > > > > > >
> > > > > > > Note the space after the last quotation mark and the /
> > > > > > >
> > > > > > > Click OK or press Enter
> > > > > > > Then download, save, close the browser, and install KB927891
> > > > > > > NOTE: KB927891 is NOT supported nor intended for Vista
> > > > > > >
> > > > > > > --
> > > > > > > ====================================
> > > > > > > TaurArian [MS-MVP] 2005-2007 - Australia
> > > > > > > ====================================
> > > > > > > How to make a good post: http://www.dts-l.org/goodpost.htm
> > > > > > > Backup and data recovery: http://www.acronis.com.sg/
> > > > > > > Enhancing file system performance: http://www.diskeeper.com/defrag.asp
> > > > > > > Defending your machine: http://defendingyourmachine2.blogspot.com/
> > > > > > >
> > > > > > >
> > > > > > > "Clive" <> wrote in message
> > > > > > > news:416DA121-A41A-4920-9F0E-...
> > > > > > > | Hi, i cannot access the Windows Update website. When i first clicked on the
> > > > > > > | website, the Internet Explorer will hang while it is checking for the latest
> > > > > > > | version of Windows Updating Software...Then, an error message will apear,
> > > > > > > | indicating that' Internet explorer has encountered a problem and needs to
> > > > > > > | close. We are sorry for the inconvenience'.
> > > > > > > |
> > > > > > > | There is no error code displayed and the details for the error message are:
> > > > > > > | Appname: iexplorer.exe
> > > > > > > | Appver: 7.0.6000.16441
> > > > > > > | Modname: wuweb.dll
> > > > > > > | Mod Ver: 5.8.02469
> > > > > > > | Offset: 00018003
> > > > > > > |
> > > > > > > | I'm using Internet Explorer 7 and Windows XP SP2.
> > > > > > > |
> > > > > > > | I have also tried to run Windows Update from my Firefox browser but the same
> > > > > > > | problem occurs.
> > > > > > > |
> > > > > > > | I have run CCleaner and scanned my computer for viruses and other stuff but
> > > > > > > | it still doesn't work. Pls advise.
> > > > > > > |
> > > > > > > | Thanks and Regards
> > > > > > > | Clive
> > > > > > > |
> > > > > > > |
> > > > > > >
> > > > > > >
> > > > > > >