Windows Vista Tips

Windows Vista Tips > Newsgroups > Windows Update > Unable to Install Updates after Integrate SP2 and SP1

Reply
Thread Tools Display Modes

Unable to Install Updates after Integrate SP2 and SP1

 
 
Rosemary2028
Guest
Posts: n/a

 
      07-15-2007
I have a Dell inspiron 8500 laptop with XP Pro O/S.

When I tried to Install the Recovery Console (to use in case I can't boot by
any other means) I got following message: "Setup cannot continue because the
version of Windows on your computer is newer than the version on the CD"
[which only had SP1] {Ref: Article 898594}

I followed the directions in Article 900871 to "Integrate Windows XP Service
Pack 2 files into the Windows XP installation folder" so I could load the
Recovery Console. This was successful.

But all my Updates vanished and now they won't reinstall. When I go to the
Windows Update site, there are 79 updates that keep downloading but NONE of
them will install. This has happened about 40 times. I have a permanent
Gold Shield with the "!" in my SysTray.

What do i do to have the updates install successfully? Must i undo the
integration and return to SP2 and just forget about the Recovery Console?


 
Reply With Quote
 
 
 
 
Shenan Stanley
Guest
Posts: n/a

 
      07-15-2007
Rosemary2028 wrote:
> I have a Dell Inspiron 8500 laptop with XP Pro O/S.
>
> When I tried to Install the Recovery Console (to use in case I
> can't boot by any other means) I got following message: "Setup
> cannot continue because the version of Windows on your computer is
> newer than the version on the CD" [which only had SP1] {Ref:
> Article 898594}
>
> I followed the directions in Article 900871 to "Integrate Windows
> XP Service Pack 2 files into the Windows XP installation folder" so
> I could load the Recovery Console. This was successful.
>
> But all my Updates vanished and now they won't reinstall. When I
> go to the Windows Update site, there are 79 updates that keep
> downloading but NONE of them will install. This has happened
> about 40 times. I have a permanent Gold Shield with the "!" in my
> SysTray.
>
> What do I do to have the updates install successfully? Must I undo
> the integration and return to SP2 and just forget about the
> Recovery Console?


Try one (or both) of these:
(You may be able to do - and should likely - Solution (1) combined with 3-6
of solution (2))

Solution to try (1):

Get Dial-a-Fix:
http://wiki.djlizard.net/Dial-a-fix

Use its options to fix:
- Windows Installer
- Windows Update
- All the Registration Center options

Turn off the "Empty System32\Catroot 2"
Do NOT do "Flush SoftwareDistribution".
Then click "GO"... May take a while.

Reboot when it is done...


Solution to try (2):

1) Reboot and logon as a user with Administrative Privs...
2) Immediately run the following batch script (You will have to create it by
cutting/pasting as directed.)

- Click Start, Run, type: notepad C:\register.bat and press Enter. Choose
Yes when you are prompted.
- Copy the following commands and then paste them into the opened Notepad
window:

regsvr32 comcat.dll /s
regsvr32 shdoc401.dll /s
regsvr32 shdoc401.dll /i /s
regsvr32 asctrls.ocx /s
regsvr32 oleaut32.dll /s
regsvr32 shdocvw.dll /I /s
regsvr32 shdocvw.dll /s
regsvr32 browseui.dll /s
regsvr32 browseui.dll /I /s
regsvr32 msrating.dll /s
regsvr32 mlang.dll /s
regsvr32 hlink.dll /s
regsvr32 mshtmled.dll /s
regsvr32 urlmon.dll /s
regsvr32 plugin.ocx /s
regsvr32 sendmail.dll /s
regsvr32 scrobj.dll /s
regsvr32 mmefxe.ocx /s
regsvr32 corpol.dll /s
regsvr32 jscript.dll /s
regsvr32 msxml.dll /s
regsvr32 imgutil.dll /s
regsvr32 thumbvw.dll /s
regsvr32 cryptext.dll /s
regsvr32 rsabase.dll /s
regsvr32 inseng.dll /s
regsvr32 iesetup.dll /i /s
regsvr32 cryptdlg.dll /s
regsvr32 actxprxy.dll /s
regsvr32 dispex.dll /s
regsvr32 occache.dll /s
regsvr32 occache.dll /i /s
regsvr32 iepeers.dll /s
regsvr32 urlmon.dll /i /s
regsvr32 cdfview.dll /s
regsvr32 webcheck.dll /s
regsvr32 mobsync.dll /s
regsvr32 pngfilt.dll /s
regsvr32 licmgr10.dll /s
regsvr32 icmfilter.dll /s
regsvr32 hhctrl.ocx /s
regsvr32 inetcfg.dll /s
regsvr32 tdc.ocx /s
regsvr32 MSR2C.DLL /s
regsvr32 msident.dll /s
regsvr32 msieftp.dll /s
regsvr32 xmsconf.ocx /s
regsvr32 ils.dll /s
regsvr32 msoeacct.dll /s
regsvr32 inetcomm.dll /s
regsvr32 msdxm.ocx /s
regsvr32 dxmasf.dll /s
regsvr32 l3codecx.ax /s
regsvr32 acelpdec.ax /s
regsvr32 mpg4ds32.ax /s
regsvr32 voxmsdec.ax /s
regsvr32 danim.dll /s
regsvr32 Daxctle.ocx /s
regsvr32 lmrt.dll /s
regsvr32 datime.dll /s
regsvr32 dxtrans.dll /s
regsvr32 dxtmsft.dll /s
regsvr32 WEBPOST.DLL /s
regsvr32 WPWIZDLL.DLL /s
regsvr32 POSTWPP.DLL /s
regsvr32 CRSWPP.DLL /s
regsvr32 FTPWPP.DLL /s
regsvr32 FPWPP.DLL /s
regsvr32 WUAPI.DLL /s
regsvr32 WUAUENG.DLL /s
regsvr32 ATL.DLL /s
regsvr32 WUCLTUI.DLL /s
regsvr32 WUPS.DLL /s
regsvr32 WUWEB.DLL /s
regsvr32 wshom.ocx /s
regsvr32 wshext.dll /s
regsvr32 vbscript.dll /s
regsvr32 scrrun.dll mstinit.exe /setup /s
regsvr32 msnsspc.dll /SspcCreateSspiReg /s
regsvr32 msapsspc.dll /SspcCreateSspiReg /s
regsvr32 /s urlmon.dll
regsvr32 /s mshtml.dll
regsvr32 /s shdocvw.dll
regsvr32 /s browseui.dll
regsvr32 /s jscript.dll
regsvr32 /s vbscript.dll
regsvr32 /s scrrun.dll
regsvr32 /s msxml.dll
regsvr32 /s actxprxy.dll
regsvr32 /s softpub.dll
regsvr32 /s wintrust.dll
regsvr32 /s dssenh.dll
regsvr32 /s rsaenh.dll
regsvr32 /s gpkcsp.dll
regsvr32 /s sccbase.dll
regsvr32 /s slbcsp.dll
regsvr32 /s cryptdlg.dll
regsvr32 /s schannel.dll
regsvr32 /s oleaut32.dll
regsvr32 /s ole32.dll
regsvr32 /s shell32.dll
regsvr32 /s initpki.dll
regsvr32 /s msscript.ocx
regsvr32 /s dispex.dll
regsvr32 jscript.dll /s
del %temp% /Q /F
net stop wuauserv
net stop cryptsvc
ren %windir%\system32\catroot2 catroot2.old
cd /d %windir%\SoftwareDistribution
rd /s DataStore /Q
regsvr32 wuapi.dll /s
regsvr32 wups.dll /s
regsvr32 wuaueng.dll /s
regsvr32 wucltui.dll /s
regsvr32 wuweb.dll /s
regsvr32 msxml.dll /s
regsvr32 msxml2.dll /s
regsvr32 msxml3.dll /s
regsvr32 urlmon.dll /s
net start cryptsvc
net start wuauserv
exit

- After you paste the above commands, please close the Notepad window.
Choose Yes when you are prompted to save the file.
- Click Start, Run, type:
C:\register.bat and press Enter to run the commands I have pasted.
The Process may take sometime.

3) Download/Install Windows Update v3.
http://go.microsoft.com/fwlink/?LinkID=91237

(You may need to install it using the command line switch "/wuforce" right
after an additional reboot - immediately after logging in.)

4) Download/Install the 927891 patch.
http://www.microsoft.com/downloads/d...9-404327772E5A

5) Reboot. Try your updates again...

6) Come back here and let us know how things went!

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html


 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unable to install updates mrholsr Windows Update 1 10-10-2006 06:32 PM
Unable to install updates bhappy Windows Update 1 09-25-2005 03:23 PM
Unable to install the updates.... imcoolanytime Windows Update 11 04-16-2005 03:30 AM
Unable to install certain WIN Updates Akhil Gupta Windows Update 1 01-20-2004 12:46 AM
unable to install xp updates Priscilla Windows Update 0 08-17-2003 06:53 PM



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59