Vista network printing problem

I have a Canon multifunction machine hooked up to an XP computer. I ca
print to it with two other XP machines and a Windows 7 machine. Bu
when I try to install the Canon Vista x64 driver on the Vista machine
it looks for a printer attached to the computer in order to complete th
driver installation and it will NOT find the networked printer. So, th
driver install stops. I have tried hooking the printer up to the Vist
machine and the driver install completes. But, when I go back in an
try to reattach the printer to the XP machine and find the drivers, th
Vista machine won't find the damned drivers. Does anyone have an
suggestions out there. Geez, Vista sucks. (But at least 7 is great

--
vjkelly2001

On the Vista 64 bit PC, use Add Printer Wizard, and point it to the Canon
printer on the network..... when it asks you to find the location of the
drivers, point it towards the *.inf folder that the Canon install created...
LOCALLY.

If that fails, temporarily attach the Canon printer to the Vista 64 bit
PC... and do the install that way, then put the printer back on the XP PC
and Vista 64 bit will at least know where the drivers are (or should do!).
--
Cari (MS-MVP) Printing & Imaging
www.coribright.com/windows

"vjkelly2001" <> wrote in message
news:...
>
> I have a Canon multifunction machine hooked up to an XP computer. I can
> print to it with two other XP machines and a Windows 7 machine. But
> when I try to install the Canon Vista x64 driver on the Vista machine,
> it looks for a printer attached to the computer in order to complete the
> driver installation and it will NOT find the networked printer. So, the
> driver install stops. I have tried hooking the printer up to the Vista
> machine and the driver install completes. But, when I go back in and
> try to reattach the printer to the XP machine and find the drivers, the
> Vista machine won't find the damned drivers. Does anyone have any
> suggestions out there. Geez, Vista sucks. (But at least 7 is great)
>
>
> --
> vjkelly2001

I already tried to install the printer directly on the Vista 64 PC an
when I try to install the network printer I can't find the .inf file o
folder. I went in and found the drivers for the printer on the Vista P
but no .inf files or folders there. When I pointed the network instal
to the folder where the drivers reside, the network printer instal
procedure doesn't load any of the driver files. It only wants the .in
file or folder. This is a pain in the you know what

Anyone else out there with any ideas?

--
vjkelly2001

Most likely the name for the x64 driver is different than the name the
vendor uses for the x86 version.



--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/search/?adv=1

This posting is provided "AS IS" with no warranties, and confers no rights.

"vjkelly2001" <> wrote in message
news:...
>
> I already tried to install the printer directly on the Vista 64 PC and
> when I try to install the network printer I can't find the .inf file or
> folder. I went in and found the drivers for the printer on the Vista PC
> but no .inf files or folders there. When I pointed the network install
> to the folder where the drivers reside, the network printer install
> procedure doesn't load any of the driver files. It only wants the .inf
> file or folder. This is a pain in the you know what.
>
> Anyone else out there with any ideas??
>
>
> --
> vjkelly2001

Yes, the driver does use a different name but I found it and still th
printer install is looking for an INF folder, it would appear, which
can't find anywhere. It's weird. I installed an Epson printer o
another computer (also XP) and it worked fine with the 64 bit drivers
downloaded from Epson, but the Canon software just won't work

--
vjkelly2001

You can only create an RPC connection when the driver on the machine sharing
the printer matches the client OS processor.

You will need to create a Local printer that will basically copy the print
file to the machine sharing the printer using the server service.

Create Local printer, Add Local Port in the format
\\remotemachine\printshare, select the driver name of your OS architecture,
Next ,Next, Finish.





--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/search/?adv=1

This posting is provided "AS IS" with no warranties, and confers no rights.

"vjkelly2001" <> wrote in message
news:...
>
> Yes, the driver does use a different name but I found it and still the
> printer install is looking for an INF folder, it would appear, which I
> can't find anywhere. It's weird. I installed an Epson printer on
> another computer (also XP) and it worked fine with the 64 bit drivers I
> downloaded from Epson, but the Canon software just won't work.
>
>
> --
> vjkelly2001