Vista starts in Safe Mode all the time

Hi there

I've searched the net fro info about this but I just don't get any wiser.

Here's the story.
Installed a HP photosmart 516 (so that you can print out photos). All worked
fine eventhough it wasn't "certified" for Vista. I printed pictures and so on
- worked normally on it with office programs and windows mail. I went away
from it for a couple of days (it goes into standby - and my husband told me
that one night he woke up because it started by itself and then it shut
down??!!) Coming back and restarting the desktop made it almost freeze BEFORE
even running the BIOS. I thought that there was something wrong with the BIOS
and have even looked for updates at HP's webpages. But it's not
that.....after about 15 min it starts as always no problems.
Of course I got annyoed with this one evening so I went into Safe Mode to
see if there was any difference in doing that....Being in there I decided to
make a "System Restore" to see if that could help. So that's what I did.
After this it only starts in Safe Mode!!!
But it doesn't wait for 15 min before loading the BIOS or whatever it's
working with...
I have been trying to System Restore even further back....no changes.
Then I went into msconfig and tried a few things that I read on the net.
Still the same.
I brought it with me to my work where we are 3 that works with IT in hope
that 3 pair of eyes may see more than one pair.
And we came up with making a new user with admin rights and then changing
again in msconfig to not make "Safe Boot" (this underneath "Boot"). Then it
can start the right way BUT then it doesn't allow some programs to startup??!!
OKay we then took away the programs from the startup folder. Still the same
problem because then it was msconfig that was the new problem ...not being
permitted to run in startup (wherever that came from??)
Everytime we go into msconfig and choose the option that we want windows run
normally then it by itself marks that it should start in Safe Mode (under
"Boot")?
Even when chooseing from F8 that it should start normally - it starts in
Safe Mode.
I'm getting grey hairs and loseing hair too from this - because we have
absolutely no idea how to stop it from misbehaving. ---- Sure --- we could
reinstall it and I could make a back up of all the files.....but then I
still wouldn't know what the problem was or whether it will suddenly happen
again -- beside that I've had it for so little time that I haven't made
"discovery disk's" yet... --- clever me ;-)

Are there anybody out there that have heard about anything like this or
there might have a brilliant idea???
Thanks in advance & Wishing you all a nice day :-)
--
LSH

Have you checked Msconfig\BOOT.INI if Safeboot in not checked

--
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.

"Lene" <> wrote in message news:3E6239D9-5A14-400E-B19A-...
> Hi there
>
> I've searched the net fro info about this but I just don't get any wiser.
>
> Here's the story.
> Installed a HP photosmart 516 (so that you can print out photos). All worked
> fine eventhough it wasn't "certified" for Vista. I printed pictures and so on
> - worked normally on it with office programs and windows mail. I went away
> from it for a couple of days (it goes into standby - and my husband told me
> that one night he woke up because it started by itself and then it shut
> down??!!) Coming back and restarting the desktop made it almost freeze BEFORE
> even running the BIOS. I thought that there was something wrong with the BIOS
> and have even looked for updates at HP's webpages. But it's not
> that.....after about 15 min it starts as always no problems.
> Of course I got annyoed with this one evening so I went into Safe Mode to
> see if there was any difference in doing that....Being in there I decided to
> make a "System Restore" to see if that could help. So that's what I did.
> After this it only starts in Safe Mode!!!
> But it doesn't wait for 15 min before loading the BIOS or whatever it's
> working with...
> I have been trying to System Restore even further back....no changes.
> Then I went into msconfig and tried a few things that I read on the net.
> Still the same.
> I brought it with me to my work where we are 3 that works with IT in hope
> that 3 pair of eyes may see more than one pair.
> And we came up with making a new user with admin rights and then changing
> again in msconfig to not make "Safe Boot" (this underneath "Boot"). Then it
> can start the right way BUT then it doesn't allow some programs to startup??!!
> OKay we then took away the programs from the startup folder. Still the same
> problem because then it was msconfig that was the new problem ...not being
> permitted to run in startup (wherever that came from??)
> Everytime we go into msconfig and choose the option that we want windows run
> normally then it by itself marks that it should start in Safe Mode (under
> "Boot")?
> Even when chooseing from F8 that it should start normally - it starts in
> Safe Mode.
> I'm getting grey hairs and loseing hair too from this - because we have
> absolutely no idea how to stop it from misbehaving. ---- Sure --- we could
> reinstall it and I could make a back up of all the files.....but then I
> still wouldn't know what the problem was or whether it will suddenly happen
> again -- beside that I've had it for so little time that I haven't made
> "discovery disk's" yet... --- clever me ;-)
>
> Are there anybody out there that have heard about anything like this or
> there might have a brilliant idea???
> Thanks in advance & Wishing you all a nice day :-)
> --
> LSH

YES
That's one of the real problems. If that is not checked then I can't choose
Normal startup" under "General" tab in MSConfig. If I check that I want
"Normal Startup" then it by itself choose "Safeboot" under "Boot" tab.
This means that I can never choose a "normal startup"
If I choose the safe boot not checked then it starts up "kind of" correct
but takes away a lot of programs that are being blocked from starting. EVEN
when taking away these programs from the automatic startup then it complaints
about the MSConfig (System Configuration) program??? That I really don't get
because that is Microsoft's own and that of all should be permitted to run
or???

LSH


"Peter Foldes" wrote:

> Have you checked Msconfig\BOOT.INI if Safeboot in not checked
>
> --
> Peter
>
> Please Reply to Newsgroup for the benefit of others
> Requests for assistance by email can not and will not be acknowledged.
>
> "Lene" <> wrote in message news:3E6239D9-5A14-400E-B19A-...
> > Hi there
> >
> > I've searched the net fro info about this but I just don't get any wiser.
> >
> > Here's the story.
> > Installed a HP photosmart 516 (so that you can print out photos). All worked
> > fine eventhough it wasn't "certified" for Vista. I printed pictures and so on
> > - worked normally on it with office programs and windows mail. I went away
> > from it for a couple of days (it goes into standby - and my husband told me
> > that one night he woke up because it started by itself and then it shut
> > down??!!) Coming back and restarting the desktop made it almost freeze BEFORE
> > even running the BIOS. I thought that there was something wrong with the BIOS
> > and have even looked for updates at HP's webpages. But it's not
> > that.....after about 15 min it starts as always no problems.
> > Of course I got annyoed with this one evening so I went into Safe Mode to
> > see if there was any difference in doing that....Being in there I decided to
> > make a "System Restore" to see if that could help. So that's what I did.
> > After this it only starts in Safe Mode!!!
> > But it doesn't wait for 15 min before loading the BIOS or whatever it's
> > working with...
> > I have been trying to System Restore even further back....no changes.
> > Then I went into msconfig and tried a few things that I read on the net.
> > Still the same.
> > I brought it with me to my work where we are 3 that works with IT in hope
> > that 3 pair of eyes may see more than one pair.
> > And we came up with making a new user with admin rights and then changing
> > again in msconfig to not make "Safe Boot" (this underneath "Boot"). Then it
> > can start the right way BUT then it doesn't allow some programs to startup??!!
> > OKay we then took away the programs from the startup folder. Still the same
> > problem because then it was msconfig that was the new problem ...not being
> > permitted to run in startup (wherever that came from??)
> > Everytime we go into msconfig and choose the option that we want windows run
> > normally then it by itself marks that it should start in Safe Mode (under
> > "Boot")?
> > Even when chooseing from F8 that it should start normally - it starts in
> > Safe Mode.
> > I'm getting grey hairs and loseing hair too from this - because we have
> > absolutely no idea how to stop it from misbehaving. ---- Sure --- we could
> > reinstall it and I could make a back up of all the files.....but then I
> > still wouldn't know what the problem was or whether it will suddenly happen
> > again -- beside that I've had it for so little time that I haven't made
> > "discovery disk's" yet... --- clever me ;-)
> >
> > Are there anybody out there that have heard about anything like this or
> > there might have a brilliant idea???
> > Thanks in advance & Wishing you all a nice day :-)
> > --
> > LSH
>

I have the same problem. Did you ever find a solution?
Thanks,
Bob

"Lene" wrote:

> YES
> That's one of the real problems. If that is not checked then I can't choose
> Normal startup" under "General" tab in MSConfig. If I check that I want
> "Normal Startup" then it by itself choose "Safeboot" under "Boot" tab.
> This means that I can never choose a "normal startup"
> If I choose the safe boot not checked then it starts up "kind of" correct
> but takes away a lot of programs that are being blocked from starting. EVEN
> when taking away these programs from the automatic startup then it complaints
> about the MSConfig (System Configuration) program??? That I really don't get
> because that is Microsoft's own and that of all should be permitted to run
> or???
>
> LSH
>
>
> "Peter Foldes" wrote:
>
> > Have you checked Msconfig\BOOT.INI if Safeboot in not checked
> >
> > --
> > Peter
> >
> > Please Reply to Newsgroup for the benefit of others
> > Requests for assistance by email can not and will not be acknowledged.
> >
> > "Lene" <> wrote in message news:3E6239D9-5A14-400E-B19A-...
> > > Hi there
> > >
> > > I've searched the net fro info about this but I just don't get any wiser.
> > >
> > > Here's the story.
> > > Installed a HP photosmart 516 (so that you can print out photos). All worked
> > > fine eventhough it wasn't "certified" for Vista. I printed pictures and so on
> > > - worked normally on it with office programs and windows mail. I went away
> > > from it for a couple of days (it goes into standby - and my husband told me
> > > that one night he woke up because it started by itself and then it shut
> > > down??!!) Coming back and restarting the desktop made it almost freeze BEFORE
> > > even running the BIOS. I thought that there was something wrong with the BIOS
> > > and have even looked for updates at HP's webpages. But it's not
> > > that.....after about 15 min it starts as always no problems.
> > > Of course I got annyoed with this one evening so I went into Safe Mode to
> > > see if there was any difference in doing that....Being in there I decided to
> > > make a "System Restore" to see if that could help. So that's what I did.
> > > After this it only starts in Safe Mode!!!
> > > But it doesn't wait for 15 min before loading the BIOS or whatever it's
> > > working with...
> > > I have been trying to System Restore even further back....no changes.
> > > Then I went into msconfig and tried a few things that I read on the net.
> > > Still the same.
> > > I brought it with me to my work where we are 3 that works with IT in hope
> > > that 3 pair of eyes may see more than one pair.
> > > And we came up with making a new user with admin rights and then changing
> > > again in msconfig to not make "Safe Boot" (this underneath "Boot"). Then it
> > > can start the right way BUT then it doesn't allow some programs to startup??!!
> > > OKay we then took away the programs from the startup folder. Still the same
> > > problem because then it was msconfig that was the new problem ...not being
> > > permitted to run in startup (wherever that came from??)
> > > Everytime we go into msconfig and choose the option that we want windows run
> > > normally then it by itself marks that it should start in Safe Mode (under
> > > "Boot")?
> > > Even when chooseing from F8 that it should start normally - it starts in
> > > Safe Mode.
> > > I'm getting grey hairs and loseing hair too from this - because we have
> > > absolutely no idea how to stop it from misbehaving. ---- Sure --- we could
> > > reinstall it and I could make a back up of all the files.....but then I
> > > still wouldn't know what the problem was or whether it will suddenly happen
> > > again -- beside that I've had it for so little time that I haven't made
> > > "discovery disk's" yet... --- clever me ;-)
> > >
> > > Are there anybody out there that have heard about anything like this or
> > > there might have a brilliant idea???
> > > Thanks in advance & Wishing you all a nice day :-)
> > > --
> > > LSH
> >

Have you tried repairing your Startup? Boot from the Windows Vista DVD
choose the System Recovery option > on the setup page click "Repair
Computer" > select your installation > click the Startup Repair option and
follow the instructions.
--
Andre
Blog: http://adacosta.spaces.live.com
My Vista Quickstart Guide:
http://adacosta.spaces.live.com/blog...3DB!9709.entry
"Judgebob" <> wrote in message
news:29C40990-7E62-4C14-B33B-...
>I have the same problem. Did you ever find a solution?
> Thanks,
> Bob
>
> "Lene" wrote:
>
>> YES
>> That's one of the real problems. If that is not checked then I can't
>> choose
>> Normal startup" under "General" tab in MSConfig. If I check that I want
>> "Normal Startup" then it by itself choose "Safeboot" under "Boot" tab.
>> This means that I can never choose a "normal startup"
>> If I choose the safe boot not checked then it starts up "kind of" correct
>> but takes away a lot of programs that are being blocked from starting.
>> EVEN
>> when taking away these programs from the automatic startup then it
>> complaints
>> about the MSConfig (System Configuration) program??? That I really don't
>> get
>> because that is Microsoft's own and that of all should be permitted to
>> run
>> or???
>>
>> LSH
>>
>>
>> "Peter Foldes" wrote:
>>
>> > Have you checked Msconfig\BOOT.INI if Safeboot in not checked
>> >
>> > --
>> > Peter
>> >
>> > Please Reply to Newsgroup for the benefit of others
>> > Requests for assistance by email can not and will not be acknowledged.
>> >
>> > "Lene" <> wrote in message
>> > news:3E6239D9-5A14-400E-B19A-...
>> > > Hi there
>> > >
>> > > I've searched the net fro info about this but I just don't get any
>> > > wiser.
>> > >
>> > > Here's the story.
>> > > Installed a HP photosmart 516 (so that you can print out photos). All
>> > > worked
>> > > fine eventhough it wasn't "certified" for Vista. I printed pictures
>> > > and so on
>> > > - worked normally on it with office programs and windows mail. I went
>> > > away
>> > > from it for a couple of days (it goes into standby - and my husband
>> > > told me
>> > > that one night he woke up because it started by itself and then it
>> > > shut
>> > > down??!!) Coming back and restarting the desktop made it almost
>> > > freeze BEFORE
>> > > even running the BIOS. I thought that there was something wrong with
>> > > the BIOS
>> > > and have even looked for updates at HP's webpages. But it's not
>> > > that.....after about 15 min it starts as always no problems.
>> > > Of course I got annyoed with this one evening so I went into Safe
>> > > Mode to
>> > > see if there was any difference in doing that....Being in there I
>> > > decided to
>> > > make a "System Restore" to see if that could help. So that's what I
>> > > did.
>> > > After this it only starts in Safe Mode!!!
>> > > But it doesn't wait for 15 min before loading the BIOS or whatever
>> > > it's
>> > > working with...
>> > > I have been trying to System Restore even further back....no changes.
>> > > Then I went into msconfig and tried a few things that I read on the
>> > > net.
>> > > Still the same.
>> > > I brought it with me to my work where we are 3 that works with IT in
>> > > hope
>> > > that 3 pair of eyes may see more than one pair.
>> > > And we came up with making a new user with admin rights and then
>> > > changing
>> > > again in msconfig to not make "Safe Boot" (this underneath "Boot").
>> > > Then it
>> > > can start the right way BUT then it doesn't allow some programs to
>> > > startup??!!
>> > > OKay we then took away the programs from the startup folder. Still
>> > > the same
>> > > problem because then it was msconfig that was the new problem ...not
>> > > being
>> > > permitted to run in startup (wherever that came from??)
>> > > Everytime we go into msconfig and choose the option that we want
>> > > windows run
>> > > normally then it by itself marks that it should start in Safe Mode
>> > > (under
>> > > "Boot")?
>> > > Even when chooseing from F8 that it should start normally - it starts
>> > > in
>> > > Safe Mode.
>> > > I'm getting grey hairs and loseing hair too from this - because we
>> > > have
>> > > absolutely no idea how to stop it from misbehaving. ---- Sure --- we
>> > > could
>> > > reinstall it and I could make a back up of all the files.....but
>> > > then I
>> > > still wouldn't know what the problem was or whether it will suddenly
>> > > happen
>> > > again -- beside that I've had it for so little time that I haven't
>> > > made
>> > > "discovery disk's" yet... --- clever me ;-)
>> > >
>> > > Are there anybody out there that have heard about anything like this
>> > > or
>> > > there might have a brilliant idea???
>> > > Thanks in advance & Wishing you all a nice day :-)
>> > > --
>> > > LSH
>> >

I upgraded to Vista Ultimate through MS Digital locker and so far I've been
unable to figure out a way to access my download. It's unclear to me why I
didn't make a backup except that I assumed I could re-download later. I'll
keep trying to get back my Vista Ultimate because it makes the most sense. If
you have any other ideas, I'll take 'em gratefully. Thanks,
Bob

"Andre Da Costa[ActiveWin]" wrote:

> Have you tried repairing your Startup? Boot from the Windows Vista DVD
> choose the System Recovery option > on the setup page click "Repair
> Computer" > select your installation > click the Startup Repair option and
> follow the instructions.
> --
> Andre
> Blog: http://adacosta.spaces.live.com
> My Vista Quickstart Guide:
> http://adacosta.spaces.live.com/blog...3DB!9709.entry
> "Judgebob" <> wrote in message
> news:29C40990-7E62-4C14-B33B-...
> >I have the same problem. Did you ever find a solution?
> > Thanks,
> > Bob
> >
> > "Lene" wrote:
> >
> >> YES
> >> That's one of the real problems. If that is not checked then I can't
> >> choose
> >> Normal startup" under "General" tab in MSConfig. If I check that I want
> >> "Normal Startup" then it by itself choose "Safeboot" under "Boot" tab.
> >> This means that I can never choose a "normal startup"
> >> If I choose the safe boot not checked then it starts up "kind of" correct
> >> but takes away a lot of programs that are being blocked from starting.
> >> EVEN
> >> when taking away these programs from the automatic startup then it
> >> complaints
> >> about the MSConfig (System Configuration) program??? That I really don't
> >> get
> >> because that is Microsoft's own and that of all should be permitted to
> >> run
> >> or???
> >>
> >> LSH
> >>
> >>
> >> "Peter Foldes" wrote:
> >>
> >> > Have you checked Msconfig\BOOT.INI if Safeboot in not checked
> >> >
> >> > --
> >> > Peter
> >> >
> >> > Please Reply to Newsgroup for the benefit of others
> >> > Requests for assistance by email can not and will not be acknowledged.
> >> >
> >> > "Lene" <> wrote in message
> >> > news:3E6239D9-5A14-400E-B19A-...
> >> > > Hi there
> >> > >
> >> > > I've searched the net fro info about this but I just don't get any
> >> > > wiser.
> >> > >
> >> > > Here's the story.
> >> > > Installed a HP photosmart 516 (so that you can print out photos). All
> >> > > worked
> >> > > fine eventhough it wasn't "certified" for Vista. I printed pictures
> >> > > and so on
> >> > > - worked normally on it with office programs and windows mail. I went
> >> > > away
> >> > > from it for a couple of days (it goes into standby - and my husband
> >> > > told me
> >> > > that one night he woke up because it started by itself and then it
> >> > > shut
> >> > > down??!!) Coming back and restarting the desktop made it almost
> >> > > freeze BEFORE
> >> > > even running the BIOS. I thought that there was something wrong with
> >> > > the BIOS
> >> > > and have even looked for updates at HP's webpages. But it's not
> >> > > that.....after about 15 min it starts as always no problems.
> >> > > Of course I got annyoed with this one evening so I went into Safe
> >> > > Mode to
> >> > > see if there was any difference in doing that....Being in there I
> >> > > decided to
> >> > > make a "System Restore" to see if that could help. So that's what I
> >> > > did.
> >> > > After this it only starts in Safe Mode!!!
> >> > > But it doesn't wait for 15 min before loading the BIOS or whatever
> >> > > it's
> >> > > working with...
> >> > > I have been trying to System Restore even further back....no changes.
> >> > > Then I went into msconfig and tried a few things that I read on the
> >> > > net.
> >> > > Still the same.
> >> > > I brought it with me to my work where we are 3 that works with IT in
> >> > > hope
> >> > > that 3 pair of eyes may see more than one pair.
> >> > > And we came up with making a new user with admin rights and then
> >> > > changing
> >> > > again in msconfig to not make "Safe Boot" (this underneath "Boot").
> >> > > Then it
> >> > > can start the right way BUT then it doesn't allow some programs to
> >> > > startup??!!
> >> > > OKay we then took away the programs from the startup folder. Still
> >> > > the same
> >> > > problem because then it was msconfig that was the new problem ...not
> >> > > being
> >> > > permitted to run in startup (wherever that came from??)
> >> > > Everytime we go into msconfig and choose the option that we want
> >> > > windows run
> >> > > normally then it by itself marks that it should start in Safe Mode
> >> > > (under
> >> > > "Boot")?
> >> > > Even when chooseing from F8 that it should start normally - it starts
> >> > > in
> >> > > Safe Mode.
> >> > > I'm getting grey hairs and loseing hair too from this - because we
> >> > > have
> >> > > absolutely no idea how to stop it from misbehaving. ---- Sure --- we
> >> > > could
> >> > > reinstall it and I could make a back up of all the files.....but
> >> > > then I
> >> > > still wouldn't know what the problem was or whether it will suddenly
> >> > > happen
> >> > > again -- beside that I've had it for so little time that I haven't
> >> > > made
> >> > > "discovery disk's" yet... --- clever me ;-)
> >> > >
> >> > > Are there anybody out there that have heard about anything like this
> >> > > or
> >> > > there might have a brilliant idea???
> >> > > Thanks in advance & Wishing you all a nice day :-)
> >> > > --
> >> > > LSH
> >> >
>
>
>

Thats one of the Chicken egg situations with Digital Locker, how will you
preserve data if you downloaded Vista and upgrade to it on the same
situation. Can at least boot into Safe Mode with Networking and then backup
the Vista image to another computer over the network?
--
Andre
Blog: http://adacosta.spaces.live.com
My Vista Quickstart Guide:
http://adacosta.spaces.live.com/blog...3DB!9709.entry
"Judgebob" <> wrote in message
news:70DF0382-D29B-4E44-AF68-...
>I upgraded to Vista Ultimate through MS Digital locker and so far I've been
> unable to figure out a way to access my download. It's unclear to me why I
> didn't make a backup except that I assumed I could re-download later. I'll
> keep trying to get back my Vista Ultimate because it makes the most sense.
> If
> you have any other ideas, I'll take 'em gratefully. Thanks,
> Bob
>
> "Andre Da Costa[ActiveWin]" wrote:
>
>> Have you tried repairing your Startup? Boot from the Windows Vista DVD
>> choose the System Recovery option > on the setup page click "Repair
>> Computer" > select your installation > click the Startup Repair option
>> and
>> follow the instructions.
>> --
>> Andre
>> Blog: http://adacosta.spaces.live.com
>> My Vista Quickstart Guide:
>> http://adacosta.spaces.live.com/blog...3DB!9709.entry
>> "Judgebob" <> wrote in message
>> news:29C40990-7E62-4C14-B33B-...
>> >I have the same problem. Did you ever find a solution?
>> > Thanks,
>> > Bob
>> >
>> > "Lene" wrote:
>> >
>> >> YES
>> >> That's one of the real problems. If that is not checked then I can't
>> >> choose
>> >> Normal startup" under "General" tab in MSConfig. If I check that I
>> >> want
>> >> "Normal Startup" then it by itself choose "Safeboot" under "Boot" tab.
>> >> This means that I can never choose a "normal startup"
>> >> If I choose the safe boot not checked then it starts up "kind of"
>> >> correct
>> >> but takes away a lot of programs that are being blocked from starting.
>> >> EVEN
>> >> when taking away these programs from the automatic startup then it
>> >> complaints
>> >> about the MSConfig (System Configuration) program??? That I really
>> >> don't
>> >> get
>> >> because that is Microsoft's own and that of all should be permitted to
>> >> run
>> >> or???
>> >>
>> >> LSH
>> >>
>> >>
>> >> "Peter Foldes" wrote:
>> >>
>> >> > Have you checked Msconfig\BOOT.INI if Safeboot in not checked
>> >> >
>> >> > --
>> >> > Peter
>> >> >
>> >> > Please Reply to Newsgroup for the benefit of others
>> >> > Requests for assistance by email can not and will not be
>> >> > acknowledged.
>> >> >
>> >> > "Lene" <> wrote in message
>> >> > news:3E6239D9-5A14-400E-B19A-...
>> >> > > Hi there
>> >> > >
>> >> > > I've searched the net fro info about this but I just don't get any
>> >> > > wiser.
>> >> > >
>> >> > > Here's the story.
>> >> > > Installed a HP photosmart 516 (so that you can print out photos).
>> >> > > All
>> >> > > worked
>> >> > > fine eventhough it wasn't "certified" for Vista. I printed
>> >> > > pictures
>> >> > > and so on
>> >> > > - worked normally on it with office programs and windows mail. I
>> >> > > went
>> >> > > away
>> >> > > from it for a couple of days (it goes into standby - and my
>> >> > > husband
>> >> > > told me
>> >> > > that one night he woke up because it started by itself and then it
>> >> > > shut
>> >> > > down??!!) Coming back and restarting the desktop made it almost
>> >> > > freeze BEFORE
>> >> > > even running the BIOS. I thought that there was something wrong
>> >> > > with
>> >> > > the BIOS
>> >> > > and have even looked for updates at HP's webpages. But it's not
>> >> > > that.....after about 15 min it starts as always no problems.
>> >> > > Of course I got annyoed with this one evening so I went into Safe
>> >> > > Mode to
>> >> > > see if there was any difference in doing that....Being in there I
>> >> > > decided to
>> >> > > make a "System Restore" to see if that could help. So that's what
>> >> > > I
>> >> > > did.
>> >> > > After this it only starts in Safe Mode!!!
>> >> > > But it doesn't wait for 15 min before loading the BIOS or whatever
>> >> > > it's
>> >> > > working with...
>> >> > > I have been trying to System Restore even further back....no
>> >> > > changes.
>> >> > > Then I went into msconfig and tried a few things that I read on
>> >> > > the
>> >> > > net.
>> >> > > Still the same.
>> >> > > I brought it with me to my work where we are 3 that works with IT
>> >> > > in
>> >> > > hope
>> >> > > that 3 pair of eyes may see more than one pair.
>> >> > > And we came up with making a new user with admin rights and then
>> >> > > changing
>> >> > > again in msconfig to not make "Safe Boot" (this underneath
>> >> > > "Boot").
>> >> > > Then it
>> >> > > can start the right way BUT then it doesn't allow some programs to
>> >> > > startup??!!
>> >> > > OKay we then took away the programs from the startup folder. Still
>> >> > > the same
>> >> > > problem because then it was msconfig that was the new problem
>> >> > > ...not
>> >> > > being
>> >> > > permitted to run in startup (wherever that came from??)
>> >> > > Everytime we go into msconfig and choose the option that we want
>> >> > > windows run
>> >> > > normally then it by itself marks that it should start in Safe Mode
>> >> > > (under
>> >> > > "Boot")?
>> >> > > Even when chooseing from F8 that it should start normally - it
>> >> > > starts
>> >> > > in
>> >> > > Safe Mode.
>> >> > > I'm getting grey hairs and loseing hair too from this - because we
>> >> > > have
>> >> > > absolutely no idea how to stop it from misbehaving. ---- Sure ---
>> >> > > we
>> >> > > could
>> >> > > reinstall it and I could make a back up of all the files.....but
>> >> > > then I
>> >> > > still wouldn't know what the problem was or whether it will
>> >> > > suddenly
>> >> > > happen
>> >> > > again -- beside that I've had it for so little time that I haven't
>> >> > > made
>> >> > > "discovery disk's" yet... --- clever me ;-)
>> >> > >
>> >> > > Are there anybody out there that have heard about anything like
>> >> > > this
>> >> > > or
>> >> > > there might have a brilliant idea???
>> >> > > Thanks in advance & Wishing you all a nice day :-)
>> >> > > --
>> >> > > LSH
>> >> >
>>
>>
>>

Howdy yall, occasionally my vista laptop starts in safe mode, which is
incredibly annoying. The only way i found to get out of it is to daoo amaual
shutdown ( Turn off using button machine) and selecting normal mode form the
options that happen when it reboots.
"Nimsy" <> wrote in message
news:...
>
> Lene,
>
> We seem to have the exact same problems, the only different may be that
> you are using a desktop while I'm running a Dell Vista laptop.
> The problem seemed to have began right after we System Restored after
> the first auto restart. Futhermore, the problem seemed permanate when we
> ran "msconfig". (Shouldn't run msconfig by following a site guide)
> Because of the System Restore the "msconfig" runs itself on Safe Mode
> mainly because you probably check "Normal Setup" following the
> restore.
> Normal Setup after the restore takes you to the original settings which
> runs only basic the devices and drivers. This will not run other
> installed programs that aren't mandatory to run Windows Vista, thus it
> being in Safe Mode.
>
> The only solution to this problem is a Windows Reinstallation
> and remember not to follow a site guide to MSCONFIG without
> credentials.
>
> sites like "dell tech support"
> or your branded computer support center
>
>
>> >> > "Lene" <> wrote in message
>> >> > news:3E6239D9-5A14-400E-B19A-...
>> >> > > Hi there
>> >> > >
>> >> > > I've searched the net fro info about this but I just don't get
> any
>> >> > > wiser.
>> >> > >
>> >> > > Here's the story.
>> >> > > Installed a HP photosmart 516 (so that you can print out
> photos). All
>> >> > > worked
>> >> > > fine eventhough it wasn't "certified" for Vista. I printed
> pictures
>> >> > > and so on
>> >> > > - worked normally on it with office programs and windows mail.
> I went
>> >> > > away
>> >> > > from it for a couple of days (it goes into standby - and my
> husband
>> >> > > told me
>> >> > > that one night he woke up because it started by itself and
> then it
>> >> > > shut
>> >> > > down??!!) Coming back and restarting the desktop made it
> almost
>> >> > > freeze BEFORE
>> >> > > even running the BIOS. I thought that there was something
> wrong with
>> >> > > the BIOS
>> >> > > and have even looked for updates at HP's webpages. But it's
> not
>> >> > > that.....after about 15 min it starts as always no problems.
>> >> > > Of course I got annyoed with this one evening so I went into
> Safe
>> >> > > Mode to
>> >> > > see if there was any difference in doing that....Being in
> there I
>> >> > > decided to
>> >> > > make a "System Restore" to see if that could help. So that's
> what I
>> >> > > did.
>> >> > > After this it only starts in Safe Mode!!!
>> >> > > But it doesn't wait for 15 min before loading the BIOS or
> whatever
>> >> > > it's
>> >> > > working with...
>> >> > > I have been trying to System Restore even further back....no
> changes.
>> >> > > Then I went into msconfig and tried a few things that I read
> on the
>> >> > > net.
>> >> > > Still the same.
>> >> > > I brought it with me to my work where we are 3 that works with
> IT in
>> >> > > hope
>> >> > > that 3 pair of eyes may see more than one pair.
>> >> > > And we came up with making a new user with admin rights and
> then
>> >> > > changing
>> >> > > again in msconfig to not make "Safe Boot" (this underneath
> "Boot").
>> >> > > Then it
>> >> > > can start the right way BUT then it doesn't allow some
> programs to
>> >> > > startup??!!
>> >> > > OKay we then took away the programs from the startup folder.
> Still
>> >> > > the same
>> >> > > problem because then it was msconfig that was the new problem
> ..not
>> >> > > being
>> >> > > permitted to run in startup (wherever that came from??)
>> >> > > Everytime we go into msconfig and choose the option that we
> want
>> >> > > windows run
>> >> > > normally then it by itself marks that it should start in Safe
> Mode
>> >> > > (under
>> >> > > "Boot")?
>> >> > > Even when chooseing from F8 that it should start normally - it
> starts
>> >> > > in
>> >> > > Safe Mode.
>> >> > > I'm getting grey hairs and loseing hair too from this -
> because we
>> >> > > have
>> >> > > absolutely no idea how to stop it from misbehaving. ---- Sure
> --- we
>> >> > > could
>> >> > > reinstall it and I could make a back up of all the
> files.....but
>> >> > > then I
>> >> > > still wouldn't know what the problem was or whether it will
> suddenly
>> >> > > happen
>> >> > > again -- beside that I've had it for so little time that I
> haven't
>> >> > > made
>> >> > > "discovery disk's" yet... --- clever me ;-)
>> >> > >
>> >> > > Are there anybody out there that have heard about anything
> like this
>> >> > > or
>> >> > > there might have a brilliant idea???
>> >> > > Thanks in advance & Wishing you all a nice day :-)
>> >> > > --
>> >> > > LSH
>
>

Thanks guys! To use msconfig helped me.
I've been using microsoft OS's for years and never had this problem.
So, my question is what is the reason that it happened? Is it somethin
I've downloaded - no, I have a reliable antivirus.
Does anybody have an answer for it?

/Zyber

Peter Foldes;248582 Wrote:
> Have you checked Msconfig\BOOT.INI if Safeboot in not checked
>
> --
> Peter
>
> Please Reply to Newsgroup for the benefit of others
> Requests for assistance by email can not and will not be acknowledged.
>
> "Lene" <> wrote in messag
> news:3E6239D9-5A14-400E-B19A-...
> > Hi there
> >
> > I've searched the net fro info about this but I just don't get an
> wiser.
> >
> > Here's the story.
> > ... deleted because of lack of plac

After trying System Restore from safe mode, with original DVD too, trie
to check boot process with sfc and with DVD too, next solution wa
successful,
I opened msconfig and in Boot tab, I haved unchecked Safe Mode. But i
the Genereal tab, the boot type was automatically switched to Selectiv
startup. When I checked Normal startup here, on the Boot tab i
automatically checked Safe Mode. So I unchecked Safe mode and checke
Make all boot settings permanent, Applied settings and in the Genera
tab was automatically selected Normal startup and after restart i
works.
System Windows Vista Business