Vista Sync Center

I have a generic CE 4.2 device.
All I need to do is be able to explore the device.
When I plug it in I get the noises like it's going to work.
But then I get a error message that Host services have stopped responding.

I've used this device for the past year with no problem in XP.
No SYNC is desired.
I hate to have to boot to my old Hard drive just to download
1 file.

TIA

Robert

Here you go,

Bucket ID: 377011862


Thanks!!


"Christian Carroll [MSFT]" <> wrote in message
news:0DD47CB6-D399-4D0D-9530-...
> Hi Robert,
>
> It seems you encountered a Watson crash. Would you be able to provide us
> with a Bucket ID for this particular problem so that we can investigate
> it? You can access the Bucket ID through the Problem Reports and Solutions
> control panel applet (start, run, "wercon" is a quick way to get there).
> From "View Problem History", you will be able to pull up details on the
> issue (double-click on that issue to see the data). It will have the
> problem signature and the bucket ID (if you received one from the Watson
> backend).
>
> The above assumes that you elected to send the problem information to
> Microsoft when the crash occurred.
>
> --
> Christian Carroll [MSFT]
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> "Robert Martin" <> wrote in message
> news:481C1FE9-545F-4340-8379-...
>>I have a generic CE 4.2 device.
>> All I need to do is be able to explore the device.
>> When I plug it in I get the noises like it's going to work.
>> But then I get a error message that Host services have stopped
>> responding.
>>
>> I've used this device for the past year with no problem in XP.
>> No SYNC is desired.
>> I hate to have to boot to my old Hard drive just to download
>> 1 file.
>>
>> TIA
>>
>> Robert
>

I didn't know to look for something like this, but when I go to the same
report, I get the following data probably from the first time WMDC stopped
working after a successful sync on Feb 4. The heading says "APPCRASH" and
that a report was sent.
---------------------------------------------
Description
Stopped working

Problem signature
Problem Event Name: APPCRASH
Application Name: WmdHost.exe
Application Version: 6.0.6783.0
Application Timestamp: 45b7b21a
Fault Module Name: unknown
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 04190144
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033

Extra information about the problem
Bucket ID: 9
------------------------------------------

Can you help me?

Harold

"Christian Carroll [MSFT]" <> wrote in message
news9DD2D81-E55D-4511-9A6A-...
> Thanks Robert. We are investigating this now.
>
> --
> Christian Carroll [MSFT]
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> "Robert Martin" <> wrote in message
> news:1B2563D5-0370-4057-867E-...
>> Here you go,
>>
>> Bucket ID: 377011862
>>
>>
>> Thanks!!
>>
>>
>> "Christian Carroll [MSFT]" <> wrote in message
>> news:0DD47CB6-D399-4D0D-9530-...
>>> Hi Robert,
>>>
>>> It seems you encountered a Watson crash. Would you be able to provide
>>> us with a Bucket ID for this particular problem so that we can
>>> investigate it? You can access the Bucket ID through the Problem Reports
>>> and Solutions control panel applet (start, run, "wercon" is a quick way
>>> to get there). From "View Problem History", you will be able to pull up
>>> details on the issue (double-click on that issue to see the data). It
>>> will have the problem signature and the bucket ID (if you received one
>>> from the Watson backend).
>>>
>>> The above assumes that you elected to send the problem information to
>>> Microsoft when the crash occurred.
>>>
>>> --
>>> Christian Carroll [MSFT]
>>> This posting is provided "AS IS" with no warranties, and confers no
>>> rights.
>>>
>>> "Robert Martin" <> wrote in message
>>> news:481C1FE9-545F-4340-8379-...
>>>>I have a generic CE 4.2 device.
>>>> All I need to do is be able to explore the device.
>>>> When I plug it in I get the noises like it's going to work.
>>>> But then I get a error message that Host services have stopped
>>>> responding.
>>>>
>>>> I've used this device for the past year with no problem in XP.
>>>> No SYNC is desired.
>>>> I hate to have to boot to my old Hard drive just to download
>>>> 1 file.
>>>>
>>>> TIA
>>>>
>>>> Robert
>>>
>>
>

Christian:

1. The report I sent is the only one I see. So I suppose this is different
than the day-to-day problem I am having with trying to syn my smartphone to
my Vista pc.
2. My pc is a Dell XPS 410 that came just over 2 weeks ago with Vista Home
Premium. The mobile device is a Cingular 3125.
3. I have the 32 bit version of Vista.
4. I didn't know how to find this part of Vista (wercon) until I saw this
thread so I can't answer this question. Sorry.
5. What you see was copied from the report and pasted into my post so the #9
is what it says. I checked again to make sure that something unusual had not
happened, but what you see is what I see.

I appreciate your help.

Harold


"Christian Carroll [MSFT]" <> wrote in message
news:F7A31D7B-00DA-4D14-B923-...
> Hi Harold,
>
> A few questions for you here.
>
> 1) Are you still seeing this application crash after you sync, or was
> this a one-time occurrence? If you are still seeing it, when was the last
> time?
> 2) What type of device were you using when you encountered this problem?
> 3) Are you running Vista 32-bit or 64 bit version?
> 4) What were the exact steps you took in order to hit this problem and at
> which point does the problem occur?
> 5) Are you sure that the Problem Reports and Solutions control panel is
> reporting this crash as Bucked ID # 9? Can you double-check that for me?
>
>
> Thanks,
> --
> Christian Carroll [MSFT]
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> "Ako" <ako@utopia> wrote in message
> news:uZ$Z%...
>>I didn't know to look for something like this, but when I go to the same
>>report, I get the following data probably from the first time WMDC stopped
>>working after a successful sync on Feb 4. The heading says "APPCRASH" and
>>that a report was sent.
>> ---------------------------------------------
>> Description
>> Stopped working
>>
>> Problem signature
>> Problem Event Name: APPCRASH
>> Application Name: WmdHost.exe
>> Application Version: 6.0.6783.0
>> Application Timestamp: 45b7b21a
>> Fault Module Name: unknown
>> Fault Module Version: 0.0.0.0
>> Fault Module Timestamp: 00000000
>> Exception Code: c0000005
>> Exception Offset: 04190144
>> OS Version: 6.0.6000.2.0.0.768.3
>> Locale ID: 1033
>>
>> Extra information about the problem
>> Bucket ID: 9
>> ------------------------------------------
>>
>> Can you help me?
>>
>> Harold
>>
>> "Christian Carroll [MSFT]" <> wrote in message
>> news9DD2D81-E55D-4511-9A6A-...
>>> Thanks Robert. We are investigating this now.
>>>
>>> --
>>> Christian Carroll [MSFT]
>>> This posting is provided "AS IS" with no warranties, and confers no
>>> rights.
>>>
>>> "Robert Martin" <> wrote in message
>>> news:1B2563D5-0370-4057-867E-...
>>>> Here you go,
>>>>
>>>> Bucket ID: 377011862
>>>>
>>>>
>>>> Thanks!!
>>>>
>>>>
>>>> "Christian Carroll [MSFT]" <> wrote in
>>>> message news:0DD47CB6-D399-4D0D-9530-...
>>>>> Hi Robert,
>>>>>
>>>>> It seems you encountered a Watson crash. Would you be able to provide
>>>>> us with a Bucket ID for this particular problem so that we can
>>>>> investigate it? You can access the Bucket ID through the Problem
>>>>> Reports and Solutions control panel applet (start, run, "wercon" is a
>>>>> quick way to get there). From "View Problem History", you will be able
>>>>> to pull up details on the issue (double-click on that issue to see the
>>>>> data). It will have the problem signature and the bucket ID (if you
>>>>> received one from the Watson backend).
>>>>>
>>>>> The above assumes that you elected to send the problem information to
>>>>> Microsoft when the crash occurred.
>>>>>
>>>>> --
>>>>> Christian Carroll [MSFT]
>>>>> This posting is provided "AS IS" with no warranties, and confers no
>>>>> rights.
>>>>>
>>>>> "Robert Martin" <> wrote in message
>>>>> news:481C1FE9-545F-4340-8379-...
>>>>>>I have a generic CE 4.2 device.
>>>>>> All I need to do is be able to explore the device.
>>>>>> When I plug it in I get the noises like it's going to work.
>>>>>> But then I get a error message that Host services have stopped
>>>>>> responding.
>>>>>>
>>>>>> I've used this device for the past year with no problem in XP.
>>>>>> No SYNC is desired.
>>>>>> I hate to have to boot to my old Hard drive just to download
>>>>>> 1 file.
>>>>>>
>>>>>> TIA
>>>>>>
>>>>>> Robert
>>>>>
>>>>
>>>
>>
>