VLAN

I have configured vlan on vista 64 machine. However, the vlan status in
adapter configuration reads disabled. How do you enable it?

Thanks in advance

Hi RG,

if I got you correctly then you can enable (which is normally enabled per
default) at the network card hardware/driver parameters.
Goto your network card properties where you would normally set the TCP/IP
settings but go to "configure" -> "advanced" -> "VLAN..."

Regards
Ramazan

"RG" <> wrote in message
news:5540C818-E1CA-468B-A70E-...
> I have configured vlan on vista 64 machine. However, the vlan status in
> adapter configuration reads disabled. How do you enable it?
>
> Thanks in advance

I did that. After adding vlan, the dialog box shows 3 column listbox with
vlan entries. The third column is status. The status shows up as disabled.

"RCan" wrote:

> Hi RG,
>
> if I got you correctly then you can enable (which is normally enabled per
> default) at the network card hardware/driver parameters.
> Goto your network card properties where you would normally set the TCP/IP
> settings but go to "configure" -> "advanced" -> "VLAN..."
>
> Regards
> Ramazan
>
> "RG" <> wrote in message
> news:5540C818-E1CA-468B-A70E-...
> > I have configured vlan on vista 64 machine. However, the vlan status in
> > adapter configuration reads disabled. How do you enable it?
> >
> > Thanks in advance
>

strange - for me it works :-( check if there are newer drivers available for
your NIC model.

regards
Ramazan

"RG" <> wrote in message
news:310D7E37-1416-4F3A-B161-...
> I did that. After adding vlan, the dialog box shows 3 column listbox with
> vlan entries. The third column is status. The status shows up as
> disabled.
>
> "RCan" wrote:
>
>> Hi RG,
>>
>> if I got you correctly then you can enable (which is normally enabled per
>> default) at the network card hardware/driver parameters.
>> Goto your network card properties where you would normally set the TCP/IP
>> settings but go to "configure" -> "advanced" -> "VLAN..."
>>
>> Regards
>> Ramazan
>>
>> "RG" <> wrote in message
>> news:5540C818-E1CA-468B-A70E-...
>> > I have configured vlan on vista 64 machine. However, the vlan status
>> > in
>> > adapter configuration reads disabled. How do you enable it?
>> >
>> > Thanks in advance
>>